void Operators::reset(bool removeStrokes)
{
ViewMap *vm = ViewMap::getInstance();
if (!vm) {
cerr << "Error: no ViewMap computed yet" << endl;
return;
}
_current_view_edges_set.clear();
for (I1DContainer::iterator it = _current_chains_set.begin(); it != _current_chains_set.end(); ++it)
delete *it;
_current_chains_set.clear();
ViewMap::viewedges_container& vedges = vm->ViewEdges();
ViewMap::viewedges_container::iterator ve = vedges.begin(), veend = vedges.end();
for (; ve != veend; ++ve) {
if ((*ve)->getLength2D() < M_EPSILON)
continue;
_current_view_edges_set.push_back(*ve);
}
_current_set = &_current_view_edges_set;
if (removeStrokes)
_current_strokes_set.clear();
}
void CulledOccluderSource::cullViewEdges(ViewMap& viewMap, bool extensiveFEdgeSearch)
{
// Cull view edges by marking them as non-displayable.
// This avoids the complications of trying to delete edges from the ViewMap.
// Non-displayable view edges will be skipped over during visibility calculation.
// View edges will be culled according to their position w.r.t. the viewport proscenium (viewport + 5% border,
// or some such).
// Get proscenium boundary for culling
real viewProscenium[4];
GridHelpers::getDefaultViewProscenium(viewProscenium);
real prosceniumOrigin[2];
prosceniumOrigin[0] = (viewProscenium[1] - viewProscenium[0]) / 2.0;
prosceniumOrigin[1] = (viewProscenium[3] - viewProscenium[2]) / 2.0;
if (G.debug & G_DEBUG_FREESTYLE) {
cout << "Proscenium culling:" << endl;
cout << "Proscenium: [" << viewProscenium[0] << ", " << viewProscenium[1] << ", " << viewProscenium[2] <<
", " << viewProscenium[3] << "]"<< endl;
cout << "Origin: [" << prosceniumOrigin[0] << ", " << prosceniumOrigin[1] << "]"<< endl;
}
// A separate occluder proscenium will also be maintained, starting out the same as the viewport proscenium, and
// expanding as necessary so that it encompasses the center point of at least one feature edge in each
// retained view edge.
// The occluder proscenium will be used later to cull occluding triangles before they are inserted into the Grid.
// The occluder proscenium starts out the same size as the view proscenium
GridHelpers::getDefaultViewProscenium(occluderProscenium);
// XXX Freestyle is inconsistent in its use of ViewMap::viewedges_container and vector<ViewEdge*>::iterator.
// Probably all occurences of vector<ViewEdge*>::iterator should be replaced ViewMap::viewedges_container
// throughout the code.
// For each view edge
ViewMap::viewedges_container::iterator ve, veend;
for (ve = viewMap.ViewEdges().begin(), veend = viewMap.ViewEdges().end(); ve != veend; ve++) {
// Overview:
// Search for a visible feature edge
// If none: mark view edge as non-displayable
// Otherwise:
// Find a feature edge with center point inside occluder proscenium.
// If none exists, find the feature edge with center point closest to viewport origin.
// Expand occluder proscenium to enclose center point.
// For each feature edge, while bestOccluderTarget not found and view edge not visibile
bool bestOccluderTargetFound = false;
FEdge *bestOccluderTarget = NULL;
real bestOccluderDistance = 0.0;
FEdge *festart = (*ve)->fedgeA();
FEdge *fe = festart;
// All ViewEdges start culled
(*ve)->setIsInImage(false);
// For simple visibility calculation: mark a feature edge that is known to have a center point inside
// the occluder proscenium. Cull all other feature edges.
do {
// All FEdges start culled
fe->setIsInImage(false);
// Look for the visible edge that can most easily be included in the occluder proscenium.
if (!bestOccluderTargetFound) {
// If center point is inside occluder proscenium,
if (insideProscenium(occluderProscenium, fe->center2d())) {
// Use this feature edge for visibility deterimination
fe->setIsInImage(true);
expandGridSpaceOccluderProscenium(fe);
// Mark bestOccluderTarget as found
bestOccluderTargetFound = true;
bestOccluderTarget = fe;
}
else {
real d = distance2D(fe->center2d(), prosceniumOrigin);
// If center point is closer to viewport origin than current target
if (bestOccluderTarget == NULL || d < bestOccluderDistance) {
// Then store as bestOccluderTarget
bestOccluderDistance = d;
bestOccluderTarget = fe;
}
}
}
// If feature edge crosses the view proscenium
if (!(*ve)->isInImage() && crossesProscenium(viewProscenium, fe)) {
// Then the view edge will be included in the image
(*ve)->setIsInImage(true);
}
fe = fe->nextEdge();
} while (fe != NULL && fe != festart && !(bestOccluderTargetFound && (*ve)->isInImage()));
// Either we have run out of FEdges, or we already have the one edge we need to determine visibility
// Cull all remaining edges.
while (fe != NULL && fe != festart) {
fe->setIsInImage(false);
fe = fe->nextEdge();
}
// If bestOccluderTarget was not found inside the occluder proscenium,
// we need to expand the occluder proscenium to include it.
if ((*ve)->isInImage() && bestOccluderTarget != NULL && ! bestOccluderTargetFound) {
// Expand occluder proscenium to enclose bestOccluderTarget
Vec3r point = bestOccluderTarget->center2d();
if (point[0] < occluderProscenium[0]) {
occluderProscenium[0] = point[0];
}
else if (point[0] > occluderProscenium[1]) {
occluderProscenium[1] = point[0];
}
if (point[1] < occluderProscenium[2]) {
occluderProscenium[2] = point[1];
}
else if (point[1] > occluderProscenium[3]) {
occluderProscenium[3] = point[1];
}
// Use bestOccluderTarget for visibility determination
bestOccluderTarget->setIsInImage(true);
}
}
// We are done calculating the occluder proscenium.
// Expand the occluder proscenium by an epsilon to avoid rounding errors.
const real epsilon = 1.0e-6;
occluderProscenium[0] -= epsilon;
occluderProscenium[1] += epsilon;
occluderProscenium[2] -= epsilon;
occluderProscenium[3] += epsilon;
// For "Normal" or "Fast" style visibility computation only:
// For more detailed visibility calculation, make a second pass through the view map, marking all feature edges
// with center points inside the final occluder proscenium. All of these feature edges can be considered during
// visibility calculation.
// So far we have only found one FEdge per ViewEdge. The "Normal" and "Fast" styles of visibility computation
// want to consider many FEdges for each ViewEdge.
// Here we re-scan the view map to find any usable FEdges that we skipped on the first pass, or that have become
// usable because the occluder proscenium has been expanded since the edge was visited on the first pass.
if (extensiveFEdgeSearch) {
// For each view edge,
for (ve = viewMap.ViewEdges().begin(), veend = viewMap.ViewEdges().end(); ve != veend; ve++) {
if (!(*ve)->isInImage()) {
continue;
}
// For each feature edge,
FEdge *festart = (*ve)->fedgeA();
FEdge *fe = festart;
do {
// If not (already) visible and center point inside occluder proscenium,
if (!fe->isInImage() && insideProscenium(occluderProscenium, fe->center2d())) {
// Use the feature edge for visibility determination
fe->setIsInImage(true);
expandGridSpaceOccluderProscenium(fe);
}
fe = fe->nextEdge();
} while (fe != NULL && fe != festart);
}
}
// Up until now, all calculations have been done in camera space.
// However, the occluder source's iteration and the grid that consumes the occluders both work in gridspace,
// so we need a version of the occluder proscenium in gridspace.
// Set the gridspace occlude proscenium
}