// Redraw the BOARD items but not cursors, axis or grid
void BOARD::Draw( EDA_DRAW_PANEL* aPanel, wxDC* DC, GR_DRAWMODE aDrawMode, const wxPoint& offset )
{
/* The order of drawing is flexible on some systems and not on others. For
* OSes which use OR to draw, the order is not important except for the
* effect of the highlight and its relationship to markers. See comment
* below.
* This order independence comes from the fact that a binary OR operation is
* commutative in nature.
* However on the OSX, the OR operation is not used, and so this sequence
* below is chosen to give MODULEs the highest visible priority.
*/
/* Draw all tracks and zones. As long as dark colors are used for the
* tracks, Then the OR draw mode should show tracks underneath other
* tracks. But a white track will cover any other color since it has
* more bits to OR in.
*/
for( TRACK* track = m_Track; track; track = track->Next() )
{
if( track->IsMoving() )
continue;
track->Draw( aPanel, DC, aDrawMode );
}
// Draw areas (i.e. zones)
for( int ii = 0; ii < GetAreaCount(); ii++ )
{
ZONE_CONTAINER* zone = GetArea( ii );
// Areas must be drawn here only if not moved or dragged,
// because these areas are drawn by ManageCursor() in a specific manner
if( ( zone->GetEditFlags() & (IN_EDIT | IS_DRAGGED | IS_MOVED) ) == 0 )
{
zone->Draw( aPanel, DC, aDrawMode );
zone->DrawFilledArea( aPanel, DC, aDrawMode );
}
}
// Draw the graphic items
for( BOARD_ITEM* item = m_Drawings; item; item = item->Next() )
{
if( item->IsMoving() )
continue;
switch( item->Type() )
{
case PCB_DIMENSION_T:
case PCB_TEXT_T:
case PCB_TARGET_T:
case PCB_LINE_T:
item->Draw( aPanel, DC, aDrawMode );
break;
default:
break;
}
}
LSET all_cu = LSET::AllCuMask();
for( MODULE* module = m_Modules; module; module = module->Next() )
{
bool display = true;
LSET layerMask = all_cu;
if( module->IsMoving() )
continue;
if( !IsElementVisible( LAYER_MOD_FR ) )
{
if( module->GetLayer() == F_Cu )
display = false;
layerMask.set( F_Cu, false );
}
if( !IsElementVisible( LAYER_MOD_BK ) )
{
if( module->GetLayer() == B_Cu )
display = false;
layerMask.set( B_Cu, false );
}
if( display )
module->Draw( aPanel, DC, aDrawMode );
else
Trace_Pads_Only( aPanel, DC, module, 0, 0, layerMask, aDrawMode );
}
// draw the BOARD's markers last, otherwise the high light will erase any marker on a pad
for( unsigned i = 0; i < m_markers.size(); ++i )
{
m_markers[i]->Draw( aPanel, DC, aDrawMode );
}
}
void PCB_EDIT_FRAME::PrintPage( wxDC* aDC,
LSET aPrintMask,
bool aPrintMirrorMode,
void* aData)
{
const GR_DRAWMODE drawmode = (GR_DRAWMODE) 0;
DISPLAY_OPTIONS save_opt;
BOARD* Pcb = GetBoard();
int defaultPenSize = Millimeter2iu( 0.2 );
bool onePagePerLayer = false;
PRINT_PARAMETERS* printParameters = (PRINT_PARAMETERS*) aData; // can be null
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)GetDisplayOptions();
if( printParameters && printParameters->m_OptionPrintPage == 0 )
onePagePerLayer = true;
PRINT_PARAMETERS::DrillShapeOptT drillShapeOpt = PRINT_PARAMETERS::FULL_DRILL_SHAPE;
if( printParameters )
{
drillShapeOpt = printParameters->m_DrillShapeOpt;
defaultPenSize = printParameters->m_PenDefaultSize;
}
save_opt = *displ_opts;
LAYER_ID activeLayer = GetScreen()->m_Active_Layer;
displ_opts->m_ContrastModeDisplay = false;
displ_opts->m_DisplayPadFill = true;
displ_opts->m_DisplayViaFill = true;
if( !( aPrintMask & LSET::AllCuMask() ).any() )
{
if( onePagePerLayer )
{
// We can print mask layers (solder mask and solder paste) with the actual
// pad sizes. To do that, we must set ContrastModeDisplay to true and set
// the GetScreen()->m_Active_Layer to the current printed layer
displ_opts->m_ContrastModeDisplay = true;
displ_opts->m_DisplayPadFill = true;
// Calculate the active layer number to print from its mask layer:
GetScreen()->m_Active_Layer = B_Cu;
for( LAYER_NUM id = LAYER_ID_COUNT-1; id >= 0; --id )
{
if( aPrintMask[id] )
{
GetScreen()->m_Active_Layer = LAYER_ID( id );
break;
}
}
// pads on Silkscreen layer are usually plot in sketch mode:
if( GetScreen()->m_Active_Layer == B_SilkS ||
GetScreen()->m_Active_Layer == F_SilkS )
{
displ_opts->m_DisplayPadFill = false;
}
}
else
{
displ_opts->m_DisplayPadFill = false;
}
}
displ_opts->m_DisplayPadNum = false;
bool nctmp = GetBoard()->IsElementVisible( NO_CONNECTS_VISIBLE );
GetBoard()->SetElementVisibility( NO_CONNECTS_VISIBLE, false );
bool anchorsTmp = GetBoard()->IsElementVisible( ANCHOR_VISIBLE );
GetBoard()->SetElementVisibility( ANCHOR_VISIBLE, false );
displ_opts->m_DisplayPadIsol = false;
displ_opts->m_DisplayModEdgeFill = FILLED;
displ_opts->m_DisplayModTextFill = FILLED;
displ_opts->m_DisplayPcbTrackFill = true;
displ_opts->m_ShowTrackClearanceMode = DO_NOT_SHOW_CLEARANCE;
displ_opts->m_DisplayDrawItemsFill = FILLED;
displ_opts->m_DisplayZonesMode = 0;
displ_opts->m_DisplayNetNamesMode = 0;
m_canvas->SetPrintMirrored( aPrintMirrorMode );
for( BOARD_ITEM* item = Pcb->m_Drawings; item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_LINE_T:
case PCB_DIMENSION_T:
case PCB_TEXT_T:
case PCB_TARGET_T:
if( aPrintMask[item->GetLayer()] )
item->Draw( m_canvas, aDC, drawmode );
break;
case PCB_MARKER_T:
default:
break;
}
}
// Print tracks
for( TRACK* track = Pcb->m_Track; track; track = track->Next() )
{
if( !( aPrintMask & track->GetLayerSet() ).any() )
continue;
if( track->Type() == PCB_VIA_T ) // VIA encountered.
{
int radius = track->GetWidth() / 2;
const VIA* via = static_cast<const VIA*>( track );
EDA_COLOR_T color = g_ColorsSettings.GetItemColor( VIAS_VISIBLE + via->GetViaType() );
GRFilledCircle( m_canvas->GetClipBox(), aDC,
via->GetStart().x,
via->GetStart().y,
radius,
0, color, color );
}
else
{
track->Draw( m_canvas, aDC, drawmode );
}
}
// Outdated: only for compatibility to old boards
for( TRACK* track = Pcb->m_Zone; track; track = track->Next() )
{
if( !( aPrintMask & track->GetLayerSet() ).any() )
continue;
track->Draw( m_canvas, aDC, drawmode );
}
// Draw filled areas (i.e. zones)
for( int ii = 0; ii < Pcb->GetAreaCount(); ii++ )
{
ZONE_CONTAINER* zone = Pcb->GetArea( ii );
if( aPrintMask[zone->GetLayer()] )
zone->DrawFilledArea( m_canvas, aDC, drawmode );
}
// Draw footprints, this is done at last in order to print the pad holes in
// white after the tracks and zones
int tmp = D_PAD::m_PadSketchModePenSize;
D_PAD::m_PadSketchModePenSize = defaultPenSize;
for( MODULE* module = (MODULE*) Pcb->m_Modules; module; module = module->Next() )
{
Print_Module( m_canvas, aDC, module, drawmode, aPrintMask, drillShapeOpt );
}
D_PAD::m_PadSketchModePenSize = tmp;
/* Print via holes in bg color: Not sure it is good for buried or blind
* vias */
if( drillShapeOpt != PRINT_PARAMETERS::NO_DRILL_SHAPE )
{
TRACK* track = Pcb->m_Track;
EDA_COLOR_T color = WHITE;
bool blackpenstate = GetGRForceBlackPenState();
GRForceBlackPen( false );
for( ; track; track = track->Next() )
{
if( !( aPrintMask & track->GetLayerSet() ).any() )
continue;
if( track->Type() == PCB_VIA_T ) // VIA encountered.
{
int diameter;
const VIA *via = static_cast<const VIA*>( track );
if( drillShapeOpt == PRINT_PARAMETERS::SMALL_DRILL_SHAPE )
diameter = std::min( SMALL_DRILL, via->GetDrillValue() );
else
diameter = via->GetDrillValue();
GRFilledCircle( m_canvas->GetClipBox(), aDC,
track->GetStart().x, track->GetStart().y,
diameter/2,
0, color, color );
}
}
GRForceBlackPen( blackpenstate );
}
m_canvas->SetPrintMirrored( false );
*displ_opts = save_opt;
GetScreen()->m_Active_Layer = activeLayer;
GetBoard()->SetElementVisibility( NO_CONNECTS_VISIBLE, nctmp );
GetBoard()->SetElementVisibility( ANCHOR_VISIBLE, anchorsTmp );
}