// Initialize the scene structures and get everything going
void initialize()
{
OSG::TextFaceFactory::the()->getFontFamilies(mFamilies); // Get list of all families
mRootNode = OSG::Node::create();
mTextGeom = OSG::Geometry::create();
mTextMat = OSG::ChunkMaterial::create();
mTextureObjChunk = OSG::TextureObjChunk::create();
mTextureEnvChunk = OSG::TextureEnvChunk::create();
mBlendChunk = OSG::BlendChunk::create();
// XXX: Setup a default face to use
// Setup defaults for the texture
OSG::ImageRefPtr img = OSG::Image::create(); // Temporary image for now
OSG::UChar8 data[] = {0,0,0, 50,50,50, 100,100,100, 255,255,255};
img->set( OSG::Image::OSG_RGB_PF, 2, 2, 1, 1, 1, 0, data);
// -- Setup texture and materials -- //
mTextureObjChunk->setImage(img);
mTextureObjChunk->setWrapS(GL_CLAMP);
mTextureObjChunk->setWrapT(GL_CLAMP);
mTextureObjChunk->setMagFilter(GL_LINEAR);
mTextureObjChunk->setMinFilter(GL_LINEAR_MIPMAP_LINEAR);
mTextureEnvChunk->setEnvMode(GL_MODULATE);
OSG::MaterialChunkRefPtr mat_chunk = OSG::MaterialChunk::create();
mat_chunk->setAmbient (OSG::Color4f(1.f, 1.f, 1.f, 1.f));
mat_chunk->setDiffuse (OSG::Color4f(1.f, 1.f, 1.f, 1.f));
mat_chunk->setEmission(OSG::Color4f(0.f, 0.f, 0.f, 1.f));
mat_chunk->setSpecular(OSG::Color4f(0.f, 0.f, 0.f, 1.f));
mat_chunk->setShininess(0);
mat_chunk->setColorMaterial(GL_AMBIENT_AND_DIFFUSE);
mBlendChunk->setSrcFactor(GL_SRC_ALPHA);
mBlendChunk->setDestFactor(GL_ONE_MINUS_SRC_ALPHA);
mTextMat->addChunk(mTextureObjChunk);
mTextMat->addChunk(mTextureEnvChunk);
mTextMat->addChunk(mBlendChunk);
mTextMat->addChunk(mat_chunk);
mTextGeom->setMaterial(mTextMat);
mRootNode->setCore(mTextGeom);
}
// Load texture into memory
void LoadGLTextures(void)
{
OSG::ImageRefPtr image = OSG::Image::create();
if(!image->read("./Data/worldground.jpg"))
{
printf("Could not read ./Data/worldground.jpg!!\n");
exit(1);
}
// create Texture
glGenTextures(1, &texture[0]);
// texture 2 (linear scaling)
glBindTexture(GL_TEXTURE_2D, texture[0]); // 2d texture (x and y size)
glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_LINEAR); // scale linearly when image bigger than texture
glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_LINEAR); // scale linearly when image smalled than texture
glTexImage2D(GL_TEXTURE_2D, 0, 3, image->getWidth(), image->getHeight(), 0, GL_RGB, GL_UNSIGNED_BYTE, image->getData());
}
OSG::LabelTransitPtr createIconLabel(void)
{
OSG::IconLabelRefPtr iconLabel = OSG::IconLabel::create();
#if 0
iconLabel->setSize(OSG::Vec2f(64,64));
#else
iconLabel->setSize(OSG::Vec2f(0.2,0.2));
#endif
#if 0
// FIXME: find better image example + check that in...
iconLabel->setFilename("/home/spindler/Projects/Tonky/Data/paul.jpg");
#else
std::cerr << "specify IcoenLabel.image" << std::endl;
OSG::ImageRefPtr img = OSG::Image::create();
img->read("/home/spindler/Projects/Tonky/Data/paul.jpg");
iconLabel->setImage(img);
#endif
return OSG::LabelTransitPtr(iconLabel);
}
void update_render_GrabForeGround(void)
{
// Setup the GrabForeground
_grabber = OSG::GrabForeground::create();
OSG::ImageRefPtr img = OSG::Image::create();
img->set(GL_RGBA,_w,_h);
_grabber->setImage(img);
_grabber->setAutoResize(false);
_grabber->setActive(false);
// Putting it to the viewport
_window->getPort(0)->editMFForegrounds()->push_back(_grabber);
// We toggle the switch material so as to render identification colors.
switchToIDbuffer();
_grabber->setActive(true);
OSG::commitChanges();
// We render to the grabber
_window->render(_ID_renderAction);
_grabber->setActive(false);
// We get the data back
if(_grabber->getImage()->getData() != NULL)
_ID_buffer = _grabber->getImage()->getData();
// We toggle to standard materials
switchToNormal();
// we remove the Grabber
_window->getPort(0)->removeObjFromForegrounds(_grabber);
}
void key(unsigned char key, int x, int y)
{
switch(key)
{
case 27:
planeRoot = static_cast<OSG::Node *>(NULL);
animRoot = static_cast<OSG::Node *>(NULL);
cam_transScene = static_cast<OSG::Node *>(NULL);
sceneXform = static_cast<OSG::Node *>(NULL);
tx1o = NULL;
tx1e = NULL;
#ifdef USE_DEPTH_TEXTURE
txDepth = NULL;
#endif
pFBO = NULL;
pTexBuffer = NULL;
pVisit = static_cast<OSG::Node *>(NULL);
mgr = NULL;
OSG::osgExit();
exit(0);
case 'a':
glDisable( GL_LIGHTING );
std::cerr << "Lighting disabled." << std::endl;
break;
case 's':
glEnable( GL_LIGHTING );
std::cerr << "Lighting enabled." << std::endl;
break;
case 'z':
glPolygonMode( GL_FRONT_AND_BACK, GL_POINT);
std::cerr << "PolygonMode: Point." << std::endl;
break;
case 'x':
glPolygonMode( GL_FRONT_AND_BACK, GL_LINE);
std::cerr << "PolygonMode: Line." << std::endl;
break;
case 'c':
glPolygonMode( GL_FRONT_AND_BACK, GL_FILL);
std::cerr << "PolygonMode: Fill." << std::endl;
break;
case 'd':
std::cerr << "Wrote out scene file." << std::endl;
OSG::SceneFileHandler::the()->write(planeRoot,
"simple_stage_dump.osb");
break;
case 'b':
bBoxActive = !bBoxActive;
if(bBoxActive == true)
{
pVisit->setSubTreeTravMask(0xFFFFFFFF);
}
else
{
pVisit->setSubTreeTravMask(0xFFFFFFFE);
}
break;
case 'B':
{
OSG::ImageRefPtr pImg = tx1o->getImage();
pImg->set(OSG::Image::OSG_RGB_PF, 512, 512);
// tx1o->imageContentChanged();
// Window::reinitializeGLObject(tx1o->getGLId());
pFBO->setSize(512, 512);
}
break;
case 'S':
{
OSG::ImageRefPtr pImg = tx1o->getImage();
pImg->set(OSG::Image::OSG_RGB_PF, 256, 256);
// tx1o->imageContentChanged();
// Window::reinitializeGLObject(tx1o->getGLId());
pFBO->setSize(256, 256);
}
break;
case 'r':
{
fprintf(stderr, "enable readback\n");
bReadBack = true;
pFBO->setPostProcessOnDeactivate(true);
}
break;
case 'R':
{
fprintf(stderr, "disable readback\n");
bReadBack = false;
pFBO->setPostProcessOnDeactivate(false);
}
}
}
// Initialize GLUT & OpenSG and set up the scene
int main(int argc, char **argv)
{
// OSG init
OSG::osgInit(argc,argv);
// GLUT init
int winid = setupGLUT(&argc, argv);
{
// the connection between GLUT and OpenSG
OSG::GLUTWindowRefPtr gwin = OSG::GLUTWindow::create();
gwin->setGlutId(winid);
gwin->init();
// create the scene
OSG::NodeRefPtr torus = OSG::makeTorus( .5, 2, 16, 32 );
OSG::NodeRefPtr scene = OSG::Node::create();
trans = OSG::Transform::create();
scene->setCore(trans);
scene->addChild(torus);
// Create the parts needed for the video background
OSG::UInt32 width = 640;
OSG::UInt32 height = 480;
// get the desired size from the command line
if(argc >= 3)
{
width = atoi(argv[1]);
height = atoi(argv[2]);
}
// To check OpenGL extensions, the Window needs to have run through
// frameInit at least once. This automatically happens when rendering,
// but we can't wait for that here.
gwin->activate ();
gwin->frameInit();
// Now we can check for OpenGL extensions
hasNPOT = gwin->hasExtension("GL_ARB_texture_non_power_of_two");
// Print what we've got
SLOG << "Got " << (isPOT?"":"non-") << "power-of-two images and "
<< (hasNPOT?"can":"cannot") << " use NPOT textures, changing "
<< (changeOnlyPart?"part":"all")
<< " of the screen"
<< std::endl;
// Ok, now for the meat of the code...
// first we need an Image to hold the picture(s) to show
image = OSG::Image::create();
// set the image's size and type, and allocate memory
// this example uses RGB. On some systems (e.g. Windows) BGR
// or BGRA might be faster, it depends on how the images are
// acquired
image->set(OSG::Image::OSG_RGB_PF, width, height);
// Now create the texture to be used for the background
texObj = OSG::TextureObjChunk::create();
// Associate image and texture
texObj->setImage(image);
// Set filtering modes. LINEAR is cheap and good if the image size
// changes very little (i.e. the window is about the same size as
// the images).
texObj->setMinFilter(GL_LINEAR);
texObj->setMagFilter(GL_LINEAR);
// Set the wrapping modes. We don't need repetition, it might actually
// introduce artifactes at the borders, so switch it off.
texObj->setWrapS(GL_CLAMP_TO_EDGE);
texObj->setWrapT(GL_CLAMP_TO_EDGE);
// Newer versions of OpenGL can handle NPOT textures directly.
// OpenSG will do that internally automatically.
//
// Older versions need POT textures. By default OpenSG
// will scale an NPOT texture to POT while defining it.
// For changing textures that's too slow.
// So tell OpenSG not to scale the image and adjust the texture
// coordinates used by the TextureBackground (see below).
texObj->setScale(false);
// Create the background
OSG::TextureBackgroundRefPtr back = OSG::TextureBackground::create();
// Set the texture to use
back->setTexture(texObj);
// if the image is NPOT and we don't have hardware support for it
// adjust the texture coordinates.
if(isPOT == false && hasNPOT == false)
{
OSG::UInt32 potWidth = OSG::osgNextPower2(width );
OSG::UInt32 potHeight = OSG::osgNextPower2(height);
OSG::Real32 tcRight = OSG::Real32(width ) / OSG::Real32(potWidth );
OSG::Real32 tcTop = OSG::Real32(height) / OSG::Real32(potHeight);
back->editMFTexCoords()->push_back(OSG::Vec2f( 0.f, 0.f));
back->editMFTexCoords()->push_back(OSG::Vec2f(tcRight, 0.f));
back->editMFTexCoords()->push_back(OSG::Vec2f(tcRight, tcTop));
back->editMFTexCoords()->push_back(OSG::Vec2f( 0.f, tcTop));
}
OSG::commitChanges();
// create the SimpleSceneManager helper
mgr = OSG::SimpleSceneManager::create();
// tell the manager what to manage
mgr->setWindow(gwin );
mgr->setRoot (scene);
mgr->setStatistics(true);
// replace the background
// This has to be done after the viewport has been created, which the
// SSM does in setRoot().
OSG::ViewportRefPtr vp = gwin->getPort(0);
vp->setBackground(back);
}
// show the whole scene
mgr->showAll();
// GLUT main loop
glutMainLoop();
return 0;
}