Esempi in C++ (Cpp) per DEVCAP_REG

Esempio n. 1

File: si_drv_mhl_tx.c Progetto: johnnyslt/fxos-for-v967s

static void InitCBusRegs( void )
{
	SiiRegWrite(REG_CBUS_CFG, 0xF2); 			
	SiiRegWrite(REG_CBUS_CTRL1, 0x01);          
	SiiRegWrite(REG_CBUS_CTRL2, 0x2D);          
	SiiRegWrite(REG_CBUS_CTRL7, 0x0a); 		    
	SiiRegWrite(REG_CBUS_DRV_STR0, 0x03); 		
    SiiRegWrite(REG_MSC_COMP_CTRL , 0x11);      
	SiiRegWrite(REG_MSC_TIMEOUT_LIMIT, 0x0F);           
#define DEVCAP_REG(x) (REG_CBUS_DEVICE_CAP_0 | DEVCAP_OFFSET_##x)
	SiiRegWrite(DEVCAP_REG(DEV_STATE      ) ,DEVCAP_VAL_DEV_STATE       );
	SiiRegWrite(DEVCAP_REG(MHL_VERSION    ) ,DEVCAP_VAL_MHL_VERSION     );
	SiiRegWrite(DEVCAP_REG(DEV_CAT        ) ,DEVCAP_VAL_DEV_CAT         );
	SiiRegWrite(DEVCAP_REG(ADOPTER_ID_H   ) ,DEVCAP_VAL_ADOPTER_ID_H    );
	SiiRegWrite(DEVCAP_REG(ADOPTER_ID_L   ) ,DEVCAP_VAL_ADOPTER_ID_L    );
	SiiRegWrite(DEVCAP_REG(VID_LINK_MODE  ) ,DEVCAP_VAL_VID_LINK_MODE   );
	SiiRegWrite(DEVCAP_REG(AUD_LINK_MODE  ) ,DEVCAP_VAL_AUD_LINK_MODE   );
	SiiRegWrite(DEVCAP_REG(VIDEO_TYPE     ) ,DEVCAP_VAL_VIDEO_TYPE      );
	SiiRegWrite(DEVCAP_REG(LOG_DEV_MAP    ) ,DEVCAP_VAL_LOG_DEV_MAP     );
	SiiRegWrite(DEVCAP_REG(BANDWIDTH      ) ,DEVCAP_VAL_BANDWIDTH       );
	SiiRegWrite(DEVCAP_REG(FEATURE_FLAG   ) ,DEVCAP_VAL_FEATURE_FLAG    );
	SiiRegWrite(DEVCAP_REG(DEVICE_ID_H    ) ,DEVCAP_VAL_DEVICE_ID_H     );
	SiiRegWrite(DEVCAP_REG(DEVICE_ID_L    ) ,DEVCAP_VAL_DEVICE_ID_L     );
	SiiRegWrite(DEVCAP_REG(SCRATCHPAD_SIZE) ,DEVCAP_VAL_SCRATCHPAD_SIZE );
	SiiRegWrite(DEVCAP_REG(INT_STAT_SIZE  ) ,DEVCAP_VAL_INT_STAT_SIZE   );
	SiiRegWrite(DEVCAP_REG(RESERVED       ) ,DEVCAP_VAL_RESERVED        );
}

Esempio n. 2

File: si_drv_mhl_tx.c Progetto: aicjofs/android_kernel_fuhu_t8400n

///////////////////////////////////////////////////////////////////////////
// InitCBusRegs
//
///////////////////////////////////////////////////////////////////////////
static void InitCBusRegs (void)
{

	TX_DEBUG_PRINT(("Drv: InitCBusRegs\n"));

	SiiRegWrite(REG_CBUS_COMMON_CONFIG, 0xF2); 			// Increase DDC translation layer timer
	SiiRegWrite(REG_CBUS_LINK_CONTROL_7, 0x0B); 			// Drive High Time. -- changed from 0x03 on 2011-11-21 -- changed from 0x0C on 2011-10-03 - 17:00
	SiiRegWrite(REG_CBUS_LINK_CONTROL_8, 0x30); 		// Use programmed timing.
	SiiRegWrite(REG_CBUS_DRV_STRENGTH_0, 0x03); 			// CBUS Drive Strength

#define DEVCAP_REG(x) (REG_CBUS_DEVICE_CAP_0 | DEVCAP_OFFSET_##x)
	// Setup our devcap
	SiiRegWrite(DEVCAP_REG(DEV_STATE      ) ,DEVCAP_VAL_DEV_STATE       );
	SiiRegWrite(DEVCAP_REG(MHL_VERSION    ) ,DEVCAP_VAL_MHL_VERSION     );
	SiiRegWrite(DEVCAP_REG(DEV_CAT        ) ,DEVCAP_VAL_DEV_CAT         );
	SiiRegWrite(DEVCAP_REG(ADOPTER_ID_H   ) ,DEVCAP_VAL_ADOPTER_ID_H    );
	SiiRegWrite(DEVCAP_REG(ADOPTER_ID_L   ) ,DEVCAP_VAL_ADOPTER_ID_L    );
	SiiRegWrite(DEVCAP_REG(VID_LINK_MODE  ) ,DEVCAP_VAL_VID_LINK_MODE   );
	SiiRegWrite(DEVCAP_REG(AUD_LINK_MODE  ) ,DEVCAP_VAL_AUD_LINK_MODE   );
	SiiRegWrite(DEVCAP_REG(VIDEO_TYPE     ) ,DEVCAP_VAL_VIDEO_TYPE      );
	SiiRegWrite(DEVCAP_REG(LOG_DEV_MAP    ) ,DEVCAP_VAL_LOG_DEV_MAP     );
	SiiRegWrite(DEVCAP_REG(BANDWIDTH      ) ,DEVCAP_VAL_BANDWIDTH       );
	SiiRegWrite(DEVCAP_REG(FEATURE_FLAG   ) ,DEVCAP_VAL_FEATURE_FLAG    );
	SiiRegWrite(DEVCAP_REG(DEVICE_ID_H    ) ,DEVCAP_VAL_DEVICE_ID_H     );
	SiiRegWrite(DEVCAP_REG(DEVICE_ID_L    ) ,DEVCAP_VAL_DEVICE_ID_L     );
	SiiRegWrite(DEVCAP_REG(SCRATCHPAD_SIZE) ,DEVCAP_VAL_SCRATCHPAD_SIZE );
	SiiRegWrite(DEVCAP_REG(INT_STAT_SIZE  ) ,DEVCAP_VAL_INT_STAT_SIZE   );
	SiiRegWrite(DEVCAP_REG(RESERVED       ) ,DEVCAP_VAL_RESERVED        );

	// Make bits 2,3 (initiator timeout) to 1,1 for register CBUS_LINK_CONTROL_2
    SiiRegModify(REG_CBUS_LINK_CONTROL_2,BIT_CBUS_INITIATOR_TIMEOUT_MASK,BIT_CBUS_INITIATOR_TIMEOUT_MASK);

	 // Clear legacy bit on Wolverine TX. and set timeout to 0xF
    SiiRegWrite(REG_MSC_TIMEOUT_LIMIT, 0x0F);

	// Set NMax to 1
	SiiRegWrite(REG_CBUS_LINK_CONTROL_1, 0x01);
    SiiRegModify(REG_CBUS_MSC_COMPATIBILITY_CTRL, BIT_CBUS_CEC_DISABLE,BIT_CBUS_CEC_DISABLE);  // disallow vendor specific commands

}