int main(int argc, char *argv[])
{
int errs = 0;
int rank, size, source, dest;
int minsize = 2, count;
MPI_Comm comm;
MTestDatatype sendtype, recvtype;
MTest_Init(&argc, &argv);
/* The following illustrates the use of the routines to
* run through a selection of communicators and datatypes.
* Use subsets of these for tests that do not involve combinations
* of communicators, datatypes, and counts of datatypes */
while (MTestGetIntracommGeneral(&comm, minsize, 1)) {
if (comm == MPI_COMM_NULL)
continue;
/* Determine the sender and receiver */
MPI_Comm_rank(comm, &rank);
MPI_Comm_size(comm, &size);
source = 0;
dest = size - 1;
MTEST_DATATYPE_FOR_EACH_COUNT(count) {
while (MTestGetDatatypes(&sendtype, &recvtype, count)) {
errs += test(comm, rank, source, dest, &sendtype, &recvtype);
MTestFreeDatatype(&sendtype);
MTestFreeDatatype(&recvtype);
}
}
MTestFreeComm(&comm);
}
/* Part #2: simple large size test - contiguous and noncontiguous */
if (sizeof(void *) > 4) { /* Only if > 32-bit architecture */
MPI_Comm_rank(MPI_COMM_WORLD, &rank);
MPI_Comm_size(MPI_COMM_WORLD, &size);
source = 0;
dest = size - 1;
MTestGetDatatypes(&sendtype, &recvtype, LARGE_CNT_CONTIG);
errs += test(MPI_COMM_WORLD, rank, source, dest, &sendtype, &recvtype);
do {
MTestFreeDatatype(&sendtype);
MTestFreeDatatype(&recvtype);
MTestGetDatatypes(&sendtype, &recvtype, LARGE_CNT_NONCONTIG);
} while (strstr(MTestGetDatatypeName(&sendtype), "vector") == NULL);
errs += test(MPI_COMM_WORLD, rank, source, dest, &sendtype, &recvtype);
MTestFreeDatatype(&sendtype);
MTestFreeDatatype(&recvtype);
}
MTest_Finalize(errs);
MPI_Finalize();
return 0;
}
int main( int argc, char *argv[] )
{
int errs = 0;
int attrval;
int i, key[32], keyval, saveKeyval;
MPI_Datatype type, duptype;
MTestDatatype mstype, mrtype;
char typename[MPI_MAX_OBJECT_NAME];
int tnlen;
MTest_Init( &argc, &argv );
while (MTestGetDatatypes( &mstype, &mrtype, 1 )) {
type = mstype.datatype;
MPI_Type_create_keyval( copy_fn, delete_fn, &keyval, (void *)0 );
saveKeyval = keyval; /* in case we need to free explicitly */
attrval = 1;
MPI_Type_set_attr( type, keyval, (void*)&attrval );
/* See MPI-1, 5.7.1. Freeing the keyval does not remove it if it
is in use in an attribute */
MPI_Type_free_keyval( &keyval );
/* We create some dummy keyvals here in case the same keyval
is reused */
for (i=0; i<32; i++) {
MPI_Type_create_keyval( MPI_NULL_COPY_FN, MPI_NULL_DELETE_FN,
&key[i], (void *)0 );
}
if (attrval != 1) {
errs++;
MPI_Type_get_name( type, typename, &tnlen );
printf( "attrval is %d, should be 1, before dup in type %s\n",
attrval, typename );
}
MPI_Type_dup( type, &duptype );
/* Check that the attribute was copied */
if (attrval != 2) {
errs++;
MPI_Type_get_name( type, typename, &tnlen );
printf( "Attribute not incremented when type dup'ed (%s)\n",
typename );
}
int main( int argc, char *argv[] )
{
int errs = 0, err;
int rank, size, root;
int minsize = 2, count;
MPI_Comm comm;
MTestDatatype sendtype, recvtype;
MTest_Init( &argc, &argv );
/* The following illustrates the use of the routines to
run through a selection of communicators and datatypes.
Use subsets of these for tests that do not involve combinations
of communicators, datatypes, and counts of datatypes */
while (MTestGetIntracommGeneral( &comm, minsize, 1 )) {
if (comm == MPI_COMM_NULL) continue;
/* Determine the sender and receiver */
MPI_Comm_rank( comm, &rank );
MPI_Comm_size( comm, &size );
/* To improve reporting of problems about operations, we
change the error handler to errors return */
MPI_Errhandler_set( comm, MPI_ERRORS_RETURN );
/* The max value of count must be very large to ensure that we
reach the long message algorithms */
for (count = 1; count < 2800; count = count * 4) {
while (MTestGetDatatypes( &sendtype, &recvtype, count )) {
for (root=0; root<size; root++) {
if (rank == root) {
sendtype.InitBuf( &sendtype );
err = MPI_Bcast( sendtype.buf, sendtype.count,
sendtype.datatype, root, comm );
if (err) {
errs++;
MTestPrintError( err );
}
}
else {
recvtype.InitBuf( &recvtype );
err = MPI_Bcast( recvtype.buf, recvtype.count,
recvtype.datatype, root, comm );
if (err) {
errs++;
fprintf( stderr, "Error with communicator %s and datatype %s\n",
MTestGetIntracommName(),
MTestGetDatatypeName( &recvtype ) );
MTestPrintError( err );
}
err = MTestCheckRecv( 0, &recvtype );
if (err) {
errs += errs;
}
}
}
MTestFreeDatatype( &recvtype );
MTestFreeDatatype( &sendtype );
}
}
MTestFreeComm( &comm );
}
MTest_Finalize( errs );
MPI_Finalize();
return 0;
}
int main( int argc, char *argv[] )
{
int errs = 0, err;
int rank, size, source, dest;
int minsize = 2, count;
MPI_Comm comm;
MPI_Win win;
MPI_Aint extent;
MPI_Group wingroup, neighbors;
MTestDatatype sendtype, recvtype;
MTest_Init( &argc, &argv );
/* The following illustrates the use of the routines to
run through a selection of communicators and datatypes.
Use subsets of these for tests that do not involve combinations
of communicators, datatypes, and counts of datatypes */
while (MTestGetIntracommGeneral( &comm, minsize, 1 )) {
if (comm == MPI_COMM_NULL) continue;
/* Determine the sender and receiver */
MPI_Comm_rank( comm, &rank );
MPI_Comm_size( comm, &size );
source = 0;
dest = size - 1;
for (count = 1; count < 65000; count = count * 2) {
while (MTestGetDatatypes( &sendtype, &recvtype, count )) {
/* Make sure that everyone has a recv buffer */
recvtype.InitBuf( &recvtype );
MPI_Type_extent( recvtype.datatype, &extent );
MPI_Win_create( recvtype.buf, recvtype.count * extent,
(int)extent, MPI_INFO_NULL, comm, &win );
MPI_Win_get_group( win, &wingroup );
if (rank == source) {
/* To improve reporting of problems about operations, we
change the error handler to errors return */
MPI_Win_set_errhandler( win, MPI_ERRORS_RETURN );
sendtype.InitBuf( &sendtype );
/* Neighbor is dest only */
MPI_Group_incl( wingroup, 1, &dest, &neighbors );
err = MPI_Win_start( neighbors, 0, win );
if (err) {
errs++;
if (errs < 10) {
MTestPrintError( err );
}
}
MPI_Group_free( &neighbors );
err = MPI_Put( sendtype.buf, sendtype.count,
sendtype.datatype, dest, 0,
recvtype.count, recvtype.datatype, win );
if (err) {
errs++;
MTestPrintError( err );
}
err = MPI_Win_complete( win );
if (err) {
errs++;
if (errs < 10) {
MTestPrintError( err );
}
}
}
else if (rank == dest) {
MPI_Group_incl( wingroup, 1, &source, &neighbors );
MPI_Win_post( neighbors, 0, win );
MPI_Group_free( &neighbors );
MPI_Win_wait( win );
/* This should have the same effect, in terms of
transfering data, as a send/recv pair */
err = MTestCheckRecv( 0, &recvtype );
if (err) {
errs += errs;
}
}
else {
/* Nothing; the other processes need not call any
MPI routines */
;
}
MPI_Win_free( &win );
MTestFreeDatatype( &sendtype );
MTestFreeDatatype( &recvtype );
MPI_Group_free( &wingroup );
}
}
MTestFreeComm( &comm );
}
MTest_Finalize( errs );
MPI_Finalize();
return 0;
}
int main( int argc, char **argv )
{
int errs = 0, err;
int rank, size, source, dest;
int minsize = 2, count;
MPI_Comm comm;
MPI_Win win;
MPI_Aint extent;
MTestDatatype sendtype, recvtype;
int onlyInt = 0;
MTest_Init( &argc, &argv );
/* Check for a simple choice of communicator and datatypes */
if (getenv( "MTEST_SIMPLE" )) onlyInt = 1;
while (MTestGetIntracommGeneral( &comm, minsize, 1 )) {
if (comm == MPI_COMM_NULL) continue;
/* Determine the sender and receiver */
MPI_Comm_rank( comm, &rank );
MPI_Comm_size( comm, &size );
source = 0;
dest = size - 1;
for (count = 1; count < 65000; count = count * 2) {
while (MTestGetDatatypes( &sendtype, &recvtype, count )) {
MTestPrintfMsg( 1,
"Putting count = %d of sendtype %s receive type %s\n",
count, MTestGetDatatypeName( &sendtype ),
MTestGetDatatypeName( &recvtype ) );
/* Make sure that everyone has a recv buffer */
recvtype.InitBuf( &recvtype );
MPI_Type_extent( recvtype.datatype, &extent );
MPI_Win_create( recvtype.buf, recvtype.count * extent,
extent, MPI_INFO_NULL, comm, &win );
/* To improve reporting of problems about operations, we
change the error handler to errors return */
MPI_Win_set_errhandler( win, MPI_ERRORS_RETURN );
/* At this point, we have all of the elements that we
need to begin the multiple fence and put tests */
/* Fence 1 */
err = MPI_Win_fence( MPI_MODE_NOPRECEDE, win );
if (err) { if (errs++ < MAX_PERR) MTestPrintError(err); }
/* Source puts */
if (rank == source) {
sendtype.InitBuf( &sendtype );
err = MPI_Put( sendtype.buf, sendtype.count,
sendtype.datatype, dest, 0,
recvtype.count, recvtype.datatype, win );
if (err) { if (errs++ < MAX_PERR) MTestPrintError(err); }
}
/* Fence 2 */
err = MPI_Win_fence( 0, win );
if (err) { if (errs++ < MAX_PERR) MTestPrintError(err); }
/* dest checks data, then Dest puts */
if (rank == dest) {
err = MTestCheckRecv( 0, &recvtype );
if (err) { if (errs++ < MAX_PERR) {
PrintRecvedError( "fence 2", &sendtype, &recvtype );
}
}
sendtype.InitBuf( &sendtype );
err = MPI_Put( sendtype.buf, sendtype.count,
sendtype.datatype, source, 0,
recvtype.count, recvtype.datatype, win );
if (err) { if (errs++ < MAX_PERR) MTestPrintError(err); }
}
/* Fence 3 */
err = MPI_Win_fence( 0, win );
if (err) { if (errs++ < MAX_PERR) MTestPrintError(err); }
/* src checks data, then Src and dest puts*/
if (rank == source) {
err = MTestCheckRecv( 0, &recvtype );
if (err) { if (errs++ < MAX_PERR) {
PrintRecvedError( "fence 3", &sendtype, &recvtype );
}
}
sendtype.InitBuf( &sendtype );
err = MPI_Put( sendtype.buf, sendtype.count,
sendtype.datatype, dest, 0,
recvtype.count, recvtype.datatype, win );
if (err) { if (errs++ < MAX_PERR) MTestPrintError(err); }
}
if (rank == dest) {
sendtype.InitBuf( &sendtype );
err = MPI_Put( sendtype.buf, sendtype.count,
sendtype.datatype, source, 0,
recvtype.count, recvtype.datatype, win );
if (err) { if (errs++ < MAX_PERR) MTestPrintError(err); }
}
/* Fence 4 */
err = MPI_Win_fence( MPI_MODE_NOSUCCEED, win );
if (err) { if (errs++ < MAX_PERR) MTestPrintError(err); }
/* src and dest checks data */
if (rank == source) {
err = MTestCheckRecv( 0, &recvtype );
if (err) { if (errs++ < MAX_PERR) {
PrintRecvedError( "src fence4", &sendtype, &recvtype );
}
}
}
if (rank == dest) {
err = MTestCheckRecv( 0, &recvtype );
if (err) { if (errs++ < MAX_PERR) {
PrintRecvedError( "dest fence4", &sendtype, &recvtype );
}
}
}
MPI_Win_free( &win );
MTestFreeDatatype( &sendtype );
MTestFreeDatatype( &recvtype );
/* Only do one datatype in the simple case */
if (onlyInt) break;
}
/* Only do one count in the simple case */
if (onlyInt) break;
}
MTestFreeComm(&comm);
/* Only do one communicator in the simple case */
if (onlyInt) break;
}
MTest_Finalize( errs );
MPI_Finalize();
return 0;
}
int main( int argc, char *argv[] )
{
int errs = 0, err;
int rank, size, root;
int minsize = 2, count;
MPI_Comm comm;
MTestDatatype sendtype, recvtype;
MTest_Init( &argc, &argv );
/* The following illustrates the use of the routines to
run through a selection of communicators and datatypes.
Use subsets of these for tests that do not involve combinations
of communicators, datatypes, and counts of datatypes */
while (MTestGetIntracommGeneral( &comm, minsize, 1 )) {
if (comm == MPI_COMM_NULL) continue;
/* Determine the sender and receiver */
MPI_Comm_rank( comm, &rank );
MPI_Comm_size( comm, &size );
count = 1;
MTEST_DATATYPE_FOR_EACH_COUNT(count) {
/* To shorten test time, only run the default version of datatype tests
* for comm world and run the minimum version for other communicators. */
if (comm != MPI_COMM_WORLD) {
MTestInitMinDatatypes();
}
while (MTestGetDatatypes( &sendtype, &recvtype, count )) {
for (root=0; root<size; root++) {
if (rank == root) {
sendtype.InitBuf( &sendtype );
err = MPI_Bcast( sendtype.buf, sendtype.count,
sendtype.datatype, root, comm );
if (err) {
errs++;
MTestPrintError( err );
}
}
else {
recvtype.InitBuf( &recvtype );
err = MPI_Bcast( recvtype.buf, recvtype.count,
recvtype.datatype, root, comm );
if (err) {
errs++;
fprintf( stderr, "Error with communicator %s and datatype %s\n",
MTestGetIntracommName(),
MTestGetDatatypeName( &recvtype ) );
MTestPrintError( err );
}
err = MTestCheckRecv( 0, &recvtype );
if (err) {
errs += errs;
}
}
}
MTestFreeDatatype( &recvtype );
MTestFreeDatatype( &sendtype );
}
}
MTestFreeComm( &comm );
}
MTest_Finalize( errs );
MPI_Finalize();
return 0;
}
int main( int argc, char *argv[] )
{
int errs = 0, err;
int rank, size, source, dest;
int minsize = 2, count;
MPI_Comm comm;
MPI_Status status;
MTestDatatype sendtype, recvtype;
MTest_Init( &argc, &argv );
/* The following illustrates the use of the routines to
run through a selection of communicators and datatypes.
Use subsets of these for tests that do not involve combinations
of communicators, datatypes, and counts of datatypes */
while (MTestGetIntracommGeneral( &comm, minsize, 1 )) {
if (comm == MPI_COMM_NULL) continue;
/* Determine the sender and receiver */
MPI_Comm_rank( comm, &rank );
MPI_Comm_size( comm, &size );
source = 0;
dest = size - 1;
/* To improve reporting of problems about operations, we
change the error handler to errors return */
MPI_Comm_set_errhandler( comm, MPI_ERRORS_RETURN );
for (count = 1; count < 65000; count = count * 2) {
while (MTestGetDatatypes( &sendtype, &recvtype, count )) {
if (rank == source) {
sendtype.InitBuf( &sendtype );
err = MPI_Send( sendtype.buf, sendtype.count,
sendtype.datatype, dest, 0, comm );
if (err) {
errs++;
MTestPrintError( err );
}
MTestFreeDatatype( &sendtype );
}
else if (rank == dest) {
recvtype.InitBuf( &recvtype );
err = MPI_Recv( recvtype.buf, recvtype.count,
recvtype.datatype, source, 0, comm, &status );
if (err) {
errs++;
fprintf( stderr, "Error with communicator %s and datatype %s\n",
MTestGetIntracommName(),
MTestGetDatatypeName( &recvtype ) );
MTestPrintError( err );
}
err = MTestCheckRecv( &status, &recvtype );
if (err) {
errs += errs;
}
MTestFreeDatatype( &recvtype );
}
}
}
MTestFreeComm( &comm );
}
MTest_Finalize( errs );
MPI_Finalize();
return 0;
}
int main( int argc, char *argv[] )
{
int errs = 0, err;
int rank, size, source, dest;
int minsize = 2, count, nmsg, maxmsg;
MPI_Comm comm;
MTestDatatype sendtype, recvtype;
MTest_Init( &argc, &argv );
/* The following illustrates the use of the routines to
run through a selection of communicators and datatypes.
Use subsets of these for tests that do not involve combinations
of communicators, datatypes, and counts of datatypes */
while (MTestGetIntracommGeneral( &comm, minsize, 1 )) {
if (comm == MPI_COMM_NULL) continue;
/* Determine the sender and receiver */
MPI_Comm_rank( comm, &rank );
MPI_Comm_size( comm, &size );
source = 0;
dest = size - 1;
/* To improve reporting of problems about operations, we
change the error handler to errors return */
MPI_Comm_set_errhandler( comm, MPI_ERRORS_RETURN );
for (count = 1; count < MAX_COUNT; count = count * 2) {
while (MTestGetDatatypes( &sendtype, &recvtype, count )) {
int nbytes;
MPI_Type_size( sendtype.datatype, &nbytes );
/* We may want to limit the total message size sent */
if (nbytes > MAX_MSG_SIZE) {
/* We do not need to free, as we haven't
initialized any of the buffers (?) */
continue;
}
maxmsg = MAX_COUNT - count;
MTestPrintfMsg( 1, "Sending count = %d of sendtype %s of total size %d bytes\n",
count, MTestGetDatatypeName( &sendtype ),
nbytes*count );
/* Make sure that everyone has a recv buffer */
recvtype.InitBuf( &recvtype );
if (rank == source) {
sendtype.InitBuf( &sendtype );
for (nmsg=1; nmsg<maxmsg; nmsg++) {
err = MPI_Send( sendtype.buf, sendtype.count,
sendtype.datatype, dest, 0, comm);
if (err) {
errs++;
if (errs < 10) {
MTestPrintError( err );
}
}
}
}
else if (rank == dest) {
for (nmsg=1; nmsg<maxmsg; nmsg++) {
err = MPI_Recv( recvtype.buf, recvtype.count,
recvtype.datatype, source, 0,
comm, MPI_STATUS_IGNORE);
if (err) {
errs++;
if (errs < 10) {
MTestPrintError( err );
}
}
err = MTestCheckRecv( 0, &recvtype );
if (err) {
if (errs < 10) {
printf( "Data in target buffer did not match for destination datatype %s and source datatype %s, count = %d, message iteration %d of %d\n",
MTestGetDatatypeName( &recvtype ),
MTestGetDatatypeName( &sendtype ),
count, nmsg, maxmsg );
recvtype.printErrors = 1;
(void)MTestCheckRecv( 0, &recvtype );
}
errs += err;
}
}
}
MTestFreeDatatype( &recvtype );
MTestFreeDatatype( &sendtype );
}
}
MTestFreeComm( &comm );
}
MTest_Finalize( errs );
MPI_Finalize();
return 0;
}
int main( int argc, char *argv[] )
{
int errs = 0, err;
int rank, size, source, dest;
int minsize = 2, count;
MPI_Comm comm;
MPI_Win win;
MPI_Aint extent;
MTestDatatype sendtype, recvtype;
MTest_Init( &argc, &argv );
/* The following illustrates the use of the routines to
run through a selection of communicators and datatypes.
Use subsets of these for tests that do not involve combinations
of communicators, datatypes, and counts of datatypes */
while (MTestGetIntracommGeneral( &comm, minsize, 1 )) {
if (comm == MPI_COMM_NULL) continue;
/* Determine the sender and receiver */
MPI_Comm_rank( comm, &rank );
MPI_Comm_size( comm, &size );
source = 0;
dest = size - 1;
for (count = 1; count < 65000; count = count * 2) {
while (MTestGetDatatypes( &sendtype, &recvtype, count )) {
MTestPrintfMsg( 1,
"Putting count = %d of sendtype %s receive type %s\n",
count, MTestGetDatatypeName( &sendtype ),
MTestGetDatatypeName( &recvtype ) );
/* Make sure that everyone has a recv buffer */
recvtype.InitBuf( &recvtype );
MPI_Type_extent( recvtype.datatype, &extent );
MPI_Win_create( recvtype.buf, recvtype.count * extent,
extent, MPI_INFO_NULL, comm, &win );
MPI_Win_fence( 0, win );
if (rank == source) {
/* To improve reporting of problems about operations, we
change the error handler to errors return */
MPI_Win_set_errhandler( win, MPI_ERRORS_RETURN );
sendtype.InitBuf( &sendtype );
err = MPI_Put( sendtype.buf, sendtype.count,
sendtype.datatype, dest, 0,
recvtype.count, recvtype.datatype, win );
if (err) {
errs++;
if (errs < 10) {
MTestPrintError( err );
}
}
err = MPI_Win_fence( 0, win );
if (err) {
errs++;
if (errs < 10) {
MTestPrintError( err );
}
}
}
else if (rank == dest) {
MPI_Win_fence( 0, win );
/* This should have the same effect, in terms of
transfering data, as a send/recv pair */
err = MTestCheckRecv( 0, &recvtype );
if (err) {
if (errs < 10) {
printf( "Data in target buffer did not match for destination datatype %s (put with source datatype %s)\n",
MTestGetDatatypeName( &recvtype ),
MTestGetDatatypeName( &sendtype ) );
/* Redo the test, with the errors printed */
recvtype.printErrors = 1;
(void)MTestCheckRecv( 0, &recvtype );
}
errs += err;
}
}
else {
MPI_Win_fence( 0, win );
}
MPI_Win_free( &win );
MTestFreeDatatype( &sendtype );
MTestFreeDatatype( &recvtype );
}
}
MTestFreeComm(&comm);
}
MTest_Finalize( errs );
MPI_Finalize();
return 0;
}
int main(int argc, char *argv[])
{
int errs = 0, err;
int rank, size, source, dest;
int minsize = 2, count;
MPI_Comm comm;
MPI_Win win;
MPI_Aint extent;
MTestDatatype sendtype, recvtype;
MTest_Init(&argc, &argv);
/* The following illustrates the use of the routines to
* run through a selection of communicators and datatypes.
* Use subsets of these for tests that do not involve combinations
* of communicators, datatypes, and counts of datatypes */
while (MTestGetIntracommGeneral(&comm, minsize, 1)) {
if (comm == MPI_COMM_NULL)
continue;
/* Determine the sender and receiver */
MPI_Comm_rank(comm, &rank);
MPI_Comm_size(comm, &size);
source = 0;
dest = size - 1;
MTEST_DATATYPE_FOR_EACH_COUNT(count) {
while (MTestGetDatatypes(&sendtype, &recvtype, count)) {
/* Make sure that everyone has a recv buffer */
recvtype.InitBuf(&recvtype);
MPI_Type_extent(recvtype.datatype, &extent);
MPI_Win_create(recvtype.buf, recvtype.count * extent,
(int) extent, MPI_INFO_NULL, comm, &win);
MPI_Win_fence(0, win);
if (rank == source) {
sendtype.InitBuf(&sendtype);
/* To improve reporting of problems about operations, we
* change the error handler to errors return */
MPI_Win_set_errhandler(win, MPI_ERRORS_RETURN);
/* MPI_REPLACE on accumulate is almost the same
* as MPI_Put; the only difference is in the
* handling of overlapping accumulate operations,
* which are not tested here */
err = MPI_Accumulate(sendtype.buf, sendtype.count,
sendtype.datatype, dest, 0,
recvtype.count, recvtype.datatype, MPI_REPLACE, win);
if (err) {
errs++;
if (errs < 10) {
printf("Accumulate types: send %s, recv %s\n",
MTestGetDatatypeName(&sendtype),
MTestGetDatatypeName(&recvtype));
MTestPrintError(err);
}
}
err = MPI_Win_fence(0, win);
if (err) {
errs++;
if (errs < 10) {
MTestPrintError(err);
}
}
}
else if (rank == dest) {
MPI_Win_fence(0, win);
/* This should have the same effect, in terms of
* transfering data, as a send/recv pair */
err = MTestCheckRecv(0, &recvtype);
if (err) {
errs += err;
}
}
else {
MPI_Win_fence(0, win);
}
MPI_Win_free(&win);
MTestFreeDatatype(&sendtype);
MTestFreeDatatype(&recvtype);
}
}
MTestFreeComm(&comm);
}
MTest_Finalize(errs);
MPI_Finalize();
return 0;
}
int main(int argc, char *argv[])
{
int errs = 0;
int rank, size;
int minsize = 2, count;
MPI_Comm comm;
MPI_Win win;
MPI_Aint lb, extent;
MTestDatatype sendtype, recvtype;
MTest_Init(&argc, &argv);
while (MTestGetIntracommGeneral(&comm, minsize, 1)) {
if (comm == MPI_COMM_NULL)
continue;
MPI_Comm_rank(comm, &rank);
MPI_Comm_size(comm, &size);
int source = 0;
MTEST_DATATYPE_FOR_EACH_COUNT(count) {
while (MTestGetDatatypes(&sendtype, &recvtype, count)) {
recvtype.printErrors = 1;
recvtype.InitBuf(&recvtype);
MPI_Type_get_extent(recvtype.datatype, &lb, &extent);
MPI_Win_create(recvtype.buf, lb + recvtype.count * extent,
(int) extent, MPI_INFO_NULL, comm, &win);
if (rank == source) {
int dest;
sendtype.InitBuf(&sendtype);
MPI_Win_lock_all(0, win);
for (dest = 0; dest < size; dest++)
if (dest != source) {
MPI_Accumulate(sendtype.buf, sendtype.count,
sendtype.datatype, dest, 0,
recvtype.count, recvtype.datatype, MPI_REPLACE, win);
}
MPI_Win_unlock_all(win);
MPI_Barrier(comm);
char *resbuf = (char *) calloc(lb + extent * recvtype.count, sizeof(char));
/*wait for the destinations to finish checking and reinitializing the buffers */
MPI_Barrier(comm);
MPI_Win_lock_all(0, win);
for (dest = 0; dest < size; dest++)
if (dest != source) {
MPI_Get_accumulate(sendtype.buf, sendtype.count,
sendtype.datatype, resbuf, recvtype.count,
recvtype.datatype, dest, 0, recvtype.count,
recvtype.datatype, MPI_REPLACE, win);
}
MPI_Win_unlock_all(win);
MPI_Barrier(comm);
free(resbuf);
}
else {
int err;
MPI_Barrier(comm);
MPI_Win_lock(MPI_LOCK_SHARED, rank, 0, win);
err = MTestCheckRecv(0, &recvtype);
if (err)
errs++;
recvtype.InitBuf(&recvtype);
MPI_Win_unlock(rank, win);
/*signal the source that checking and reinitialization is done */
MPI_Barrier(comm);
MPI_Barrier(comm);
MPI_Win_lock(MPI_LOCK_SHARED, rank, 0, win);
err = MTestCheckRecv(0, &recvtype);
if (err)
errs++;
MPI_Win_unlock(rank, win);
}
MPI_Win_free(&win);
MTestFreeDatatype(&sendtype);
MTestFreeDatatype(&recvtype);
}
}
MTestFreeComm(&comm);
}
MTest_Finalize(errs);
MPI_Finalize();
return 0;
}
int main(int argc, char *argv[])
{
int errs = 0, err;
int rank, size;
int count;
MPI_Comm comm;
MPI_Request req;
MTestDatatype sendtype, recvtype;
MTest_Init(&argc, &argv);
comm = MPI_COMM_WORLD;
MPI_Comm_rank(comm, &rank);
MPI_Comm_size(comm, &size);
/* To improve reporting of problems about operations, we
* change the error handler to errors return */
MPI_Comm_set_errhandler(comm, MPI_ERRORS_RETURN);
MTEST_DATATYPE_FOR_EACH_COUNT(count) {
while (MTestGetDatatypes(&sendtype, &recvtype, count)) {
sendtype.InitBuf(&sendtype);
recvtype.InitBuf(&recvtype);
err = MPI_Irecv(recvtype.buf, recvtype.count, recvtype.datatype, rank, 0, comm, &req);
if (err) {
errs++;
if (errs < 10) {
MTestPrintError(err);
}
}
err = MPI_Send(sendtype.buf, sendtype.count, sendtype.datatype, rank, 0, comm);
if (err) {
errs++;
if (errs < 10) {
MTestPrintError(err);
}
}
err = MPI_Wait(&req, MPI_STATUS_IGNORE);
err = MTestCheckRecv(0, &recvtype);
if (err) {
if (errs < 10) {
printf
("Data in target buffer did not match for destination datatype %s and source datatype %s, count = %d\n",
MTestGetDatatypeName(&recvtype), MTestGetDatatypeName(&sendtype), count);
recvtype.printErrors = 1;
(void) MTestCheckRecv(0, &recvtype);
}
errs += err;
}
err = MPI_Irecv(recvtype.buf, recvtype.count, recvtype.datatype, rank, 0, comm, &req);
if (err) {
errs++;
if (errs < 10) {
MTestPrintError(err);
}
}
err = MPI_Ssend(sendtype.buf, sendtype.count, sendtype.datatype, rank, 0, comm);
if (err) {
errs++;
if (errs < 10) {
MTestPrintError(err);
}
}
err = MPI_Wait(&req, MPI_STATUS_IGNORE);
err = MTestCheckRecv(0, &recvtype);
if (err) {
if (errs < 10) {
printf
("Data in target buffer did not match for destination datatype %s and source datatype %s, count = %d\n",
MTestGetDatatypeName(&recvtype), MTestGetDatatypeName(&sendtype), count);
recvtype.printErrors = 1;
(void) MTestCheckRecv(0, &recvtype);
}
errs += err;
}
err = MPI_Irecv(recvtype.buf, recvtype.count, recvtype.datatype, rank, 0, comm, &req);
if (err) {
errs++;
if (errs < 10) {
MTestPrintError(err);
}
}
err = MPI_Rsend(sendtype.buf, sendtype.count, sendtype.datatype, rank, 0, comm);
if (err) {
errs++;
if (errs < 10) {
MTestPrintError(err);
}
}
err = MPI_Wait(&req, MPI_STATUS_IGNORE);
err = MTestCheckRecv(0, &recvtype);
if (err) {
if (errs < 10) {
printf
("Data in target buffer did not match for destination datatype %s and source datatype %s, count = %d\n",
MTestGetDatatypeName(&recvtype), MTestGetDatatypeName(&sendtype), count);
recvtype.printErrors = 1;
(void) MTestCheckRecv(0, &recvtype);
}
errs += err;
}
MTestFreeDatatype(&sendtype);
MTestFreeDatatype(&recvtype);
}
}
MTest_Finalize(errs);
MPI_Finalize();
return 0;
}
