void rtl8188e_set_FwJoinBssReport_cmd(PADAPTER padapter, u8 mstatus)
{
JOINBSSRPT_PARM_88E JoinBssRptParm;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv);
struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
#ifdef CONFIG_WOWLAN
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
struct sta_info *psta = NULL;
#endif
BOOLEAN bSendBeacon=_FALSE;
BOOLEAN bcn_valid = _FALSE;
u8 DLBcnCount=0;
u32 poll = 0;
_func_enter_;
DBG_871X("%s mstatus(%x)\n", __FUNCTION__,mstatus);
if(mstatus == 1)
{
// We should set AID, correct TSF, HW seq enable before set JoinBssReport to Fw in 88/92C.
// Suggested by filen. Added by tynli.
rtw_write16(padapter, REG_BCN_PSR_RPT, (0xC000|pmlmeinfo->aid));
// Do not set TSF again here or vWiFi beacon DMA INT will not work.
//correct_TSF(padapter, pmlmeext);
// Hw sequende enable by dedault. 2010.06.23. by tynli.
//rtw_write16(padapter, REG_NQOS_SEQ, ((pmlmeext->mgnt_seq+100)&0xFFF));
//rtw_write8(padapter, REG_HWSEQ_CTRL, 0xFF);
//Set REG_CR bit 8. DMA beacon by SW.
pHalData->RegCR_1 |= BIT0;
rtw_write8(padapter, REG_CR+1, pHalData->RegCR_1);
// Disable Hw protection for a time which revserd for Hw sending beacon.
// Fix download reserved page packet fail that access collision with the protection time.
// 2010.05.11. Added by tynli.
//SetBcnCtrlReg(padapter, 0, BIT3);
//SetBcnCtrlReg(padapter, BIT4, 0);
rtw_write8(padapter, REG_BCN_CTRL, rtw_read8(padapter, REG_BCN_CTRL)&(~BIT(3)));
rtw_write8(padapter, REG_BCN_CTRL, rtw_read8(padapter, REG_BCN_CTRL)|BIT(4));
if(pHalData->RegFwHwTxQCtrl&BIT6)
{
DBG_871X("HalDownloadRSVDPage(): There is an Adapter is sending beacon.\n");
bSendBeacon = _TRUE;
}
// Set FWHW_TXQ_CTRL 0x422[6]=0 to tell Hw the packet is not a real beacon frame.
rtw_write8(padapter, REG_FWHW_TXQ_CTRL+2, (pHalData->RegFwHwTxQCtrl&(~BIT6)));
pHalData->RegFwHwTxQCtrl &= (~BIT6);
// Clear beacon valid check bit.
rtw_hal_set_hwreg(padapter, HW_VAR_BCN_VALID, NULL);
DLBcnCount = 0;
poll = 0;
do
{
// download rsvd page.
SetFwRsvdPagePkt(padapter, _FALSE);
DLBcnCount++;
do
{
rtw_yield_os();
//rtw_mdelay_os(10);
// check rsvd page download OK.
rtw_hal_get_hwreg(padapter, HW_VAR_BCN_VALID, (u8*)(&bcn_valid));
poll++;
} while(!bcn_valid && (poll%10)!=0 && !padapter->bSurpriseRemoved && !padapter->bDriverStopped);
}while(!bcn_valid && DLBcnCount<=100 && !padapter->bSurpriseRemoved && !padapter->bDriverStopped);
//RT_ASSERT(bcn_valid, ("HalDownloadRSVDPage88ES(): 1 Download RSVD page failed!\n"));
if(padapter->bSurpriseRemoved || padapter->bDriverStopped)
{
}
else if(!bcn_valid)
DBG_871X(ADPT_FMT": 1 DL RSVD page failed! DLBcnCount:%u, poll:%u\n",
ADPT_ARG(padapter) ,DLBcnCount, poll);
else {
struct pwrctrl_priv *pwrctl = adapter_to_pwrctl(padapter);
pwrctl->fw_psmode_iface_id = padapter->iface_id;
DBG_871X(ADPT_FMT": 1 DL RSVD page success! DLBcnCount:%u, poll:%u\n",
ADPT_ARG(padapter), DLBcnCount, poll);
}
//
// We just can send the reserved page twice during the time that Tx thread is stopped (e.g. pnpsetpower)
// becuase we need to free the Tx BCN Desc which is used by the first reserved page packet.
// At run time, we cannot get the Tx Desc until it is released in TxHandleInterrupt() so we will return
// the beacon TCB in the following code. 2011.11.23. by tynli.
//
//if(bcn_valid && padapter->bEnterPnpSleep)
if(0)
{
if(bSendBeacon)
{
rtw_hal_set_hwreg(padapter, HW_VAR_BCN_VALID, NULL);
DLBcnCount = 0;
poll = 0;
do
{
SetFwRsvdPagePkt(padapter, _TRUE);
DLBcnCount++;
do
{
rtw_yield_os();
//rtw_mdelay_os(10);
// check rsvd page download OK.
rtw_hal_get_hwreg(padapter, HW_VAR_BCN_VALID, (u8*)(&bcn_valid));
poll++;
} while(!bcn_valid && (poll%10)!=0 && !padapter->bSurpriseRemoved && !padapter->bDriverStopped);
}while(!bcn_valid && DLBcnCount<=100 && !padapter->bSurpriseRemoved && !padapter->bDriverStopped);
//RT_ASSERT(bcn_valid, ("HalDownloadRSVDPage(): 2 Download RSVD page failed!\n"));
if(padapter->bSurpriseRemoved || padapter->bDriverStopped)
{
}
else if(!bcn_valid)
DBG_871X("%s: 2 Download RSVD page failed! DLBcnCount:%u, poll:%u\n", __FUNCTION__ ,DLBcnCount, poll);
else
DBG_871X("%s: 2 Download RSVD success! DLBcnCount:%u, poll:%u\n", __FUNCTION__, DLBcnCount, poll);
}
}
// Enable Bcn
//SetBcnCtrlReg(padapter, BIT3, 0);
//SetBcnCtrlReg(padapter, 0, BIT4);
rtw_write8(padapter, REG_BCN_CTRL, rtw_read8(padapter, REG_BCN_CTRL)|BIT(3));
rtw_write8(padapter, REG_BCN_CTRL, rtw_read8(padapter, REG_BCN_CTRL)&(~BIT(4)));
// To make sure that if there exists an adapter which would like to send beacon.
// If exists, the origianl value of 0x422[6] will be 1, we should check this to
// prevent from setting 0x422[6] to 0 after download reserved page, or it will cause
// the beacon cannot be sent by HW.
// 2010.06.23. Added by tynli.
if(bSendBeacon)
{
rtw_write8(padapter, REG_FWHW_TXQ_CTRL+2, (pHalData->RegFwHwTxQCtrl|BIT6));
pHalData->RegFwHwTxQCtrl |= BIT6;
}
//
// Update RSVD page location H2C to Fw.
//
if(bcn_valid)
{
rtw_hal_set_hwreg(padapter, HW_VAR_BCN_VALID, NULL);
DBG_871X("Set RSVD page location to Fw.\n");
//FillH2CCmd88E(Adapter, H2C_88E_RSVDPAGE, H2C_RSVDPAGE_LOC_LENGTH, pMgntInfo->u1RsvdPageLoc);
}
// Do not enable HW DMA BCN or it will cause Pcie interface hang by timing issue. 2011.11.24. by tynli.
//if(!padapter->bEnterPnpSleep)
{
// Clear CR[8] or beacon packet will not be send to TxBuf anymore.
pHalData->RegCR_1 &= (~BIT0);
rtw_write8(padapter, REG_CR+1, pHalData->RegCR_1);
}
}
#ifdef CONFIG_WOWLAN
if (adapter_to_pwrctl(padapter)->wowlan_mode){
JoinBssRptParm.OpMode = mstatus;
psta = rtw_get_stainfo(&padapter->stapriv, get_bssid(pmlmepriv));
if (psta != NULL) {
JoinBssRptParm.MacID = psta->mac_id;
} else {
JoinBssRptParm.MacID = 0;
}
FillH2CCmd_88E(padapter, H2C_COM_MEDIA_STATUS_RPT, sizeof(JoinBssRptParm), (u8 *)&JoinBssRptParm);
DBG_871X_LEVEL(_drv_info_, "%s opmode:%d MacId:%d\n", __func__, JoinBssRptParm.OpMode, JoinBssRptParm.MacID);
} else {
DBG_871X_LEVEL(_drv_info_, "%s wowlan_mode is off\n", __func__);
}
#endif //CONFIG_WOWLAN
_func_exit_;
}
void rtl8192d_set_FwJoinBssReport_cmd(_adapter* padapter, u8 mstatus)
{
u8 u1JoinBssRptParm[1]={0};
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv);
struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
BOOLEAN bRecover = _FALSE;
_func_enter_;
DBG_871X("%s\n", __FUNCTION__);
if(mstatus == 1)
{
// We should set AID, correct TSF, HW seq enable before set JoinBssReport to Fw in 88/92C.
// Suggested by filen. Added by tynli.
rtw_write16(padapter, REG_BCN_PSR_RPT, (0xC000|pmlmeinfo->aid));
// Do not set TSF again here or vWiFi beacon DMA INT will not work.
//rtw_hal_set_hwreg(Adapter, HW_VAR_CORRECT_TSF, (pu1Byte)(&bTypeIbss));
// Hw sequende enable by dedault. 2010.06.23. by tynli.
//set REG_CR bit 8
pHalData->RegCR_1 |= BIT0;
rtw_write8(padapter, REG_CR+1, pHalData->RegCR_1);
// Disable Hw protection for a time which revserd for Hw sending beacon.
// Fix download reserved page packet fail that access collision with the protection time.
// 2010.05.11. Added by tynli.
//SetBcnCtrlReg(Adapter, 0, BIT3);
//SetBcnCtrlReg(Adapter, BIT4, 0);
rtw_write8(padapter, REG_BCN_CTRL, rtw_read8(padapter, REG_BCN_CTRL)&(~BIT(3)));
rtw_write8(padapter, REG_BCN_CTRL, rtw_read8(padapter, REG_BCN_CTRL)|BIT(4));
// Set FWHW_TXQ_CTRL 0x422[6]=0 to tell Hw the packet is not a real beacon frame.
if(pHalData->RegFwHwTxQCtrl&BIT6)
bRecover = _TRUE;
rtw_write8(padapter, REG_FWHW_TXQ_CTRL+2, (pHalData->RegFwHwTxQCtrl&(~BIT6)));
pHalData->RegFwHwTxQCtrl &= (~BIT6);
SetFwRsvdPagePkt(padapter, 0);
// 2010.05.11. Added by tynli.
//SetBcnCtrlReg(Adapter, BIT3, 0);
//SetBcnCtrlReg(Adapter, 0, BIT4);
rtw_write8(padapter, REG_BCN_CTRL, rtw_read8(padapter, REG_BCN_CTRL)|BIT(3));
rtw_write8(padapter, REG_BCN_CTRL, rtw_read8(padapter, REG_BCN_CTRL)&(~BIT(4)));
// To make sure that if there exists an adapter which would like to send beacon.
// If exists, the origianl value of 0x422[6] will be 1, we should check this to
// prevent from setting 0x422[6] to 0 after download reserved page, or it will cause
// the beacon cannot be sent by HW.
// 2010.06.23. Added by tynli.
if(bRecover)
{
rtw_write8(padapter, REG_FWHW_TXQ_CTRL+2, (pHalData->RegFwHwTxQCtrl|BIT6));
pHalData->RegFwHwTxQCtrl |= BIT6;
}
// Clear CR[8] or beacon packet will not be send to TxBuf anymore.
pHalData->RegCR_1 &= (~BIT0);
rtw_write8(padapter, REG_CR+1, pHalData->RegCR_1);
}
SET_H2CCMD_JOINBSSRPT_PARM_OPMODE(u1JoinBssRptParm, mstatus);
FillH2CCmd92D(padapter, H2C_JOINBSSRPT, 1, u1JoinBssRptParm);
_func_exit_;
}
void rtl8723a_set_FwJoinBssReport_cmd(struct rtw_adapter *padapter, u8 mstatus)
{
struct joinbssrpt_parm JoinBssRptParm;
struct hal_data_8723a *pHalData = GET_HAL_DATA(padapter);
struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
DBG_8723A("%s mstatus(%x)\n", __func__, mstatus);
if (mstatus == 1) {
bool bRecover = false;
u8 v8;
/* We should set AID, correct TSF, HW seq enable before set JoinBssReport to Fw in 88/92C. */
/* Suggested by filen. Added by tynli. */
rtl8723au_write16(padapter, REG_BCN_PSR_RPT,
0xC000|pmlmeinfo->aid);
/* Do not set TSF again here or vWiFi beacon DMA INT will not work. */
/* correct_TSF23a(padapter, pmlmeext); */
/* Hw sequende enable by dedault. 2010.06.23. by tynli. */
/* rtl8723au_write16(padapter, REG_NQOS_SEQ, ((pmlmeext->mgnt_seq+100)&0xFFF)); */
/* rtl8723au_write8(padapter, REG_HWSEQ_CTRL, 0xFF); */
/* set REG_CR bit 8 */
v8 = rtl8723au_read8(padapter, REG_CR+1);
v8 |= BIT(0); /* ENSWBCN */
rtl8723au_write8(padapter, REG_CR+1, v8);
/* Disable Hw protection for a time which revserd for Hw sending beacon. */
/* Fix download reserved page packet fail that access collision with the protection time. */
/* 2010.05.11. Added by tynli. */
/* SetBcnCtrlReg23a(padapter, 0, BIT(3)); */
/* SetBcnCtrlReg23a(padapter, BIT(4), 0); */
SetBcnCtrlReg23a(padapter, BIT(4), BIT(3));
/* Set FWHW_TXQ_CTRL 0x422[6]= 0 to tell Hw the packet is not a real beacon frame. */
if (pHalData->RegFwHwTxQCtrl & BIT(6))
bRecover = true;
/* To tell Hw the packet is not a real beacon frame. */
/* U1bTmp = rtl8723au_read8(padapter, REG_FWHW_TXQ_CTRL+2); */
rtl8723au_write8(padapter, REG_FWHW_TXQ_CTRL + 2,
pHalData->RegFwHwTxQCtrl & ~BIT(6));
pHalData->RegFwHwTxQCtrl &= ~BIT(6);
SetFwRsvdPagePkt(padapter, 0);
/* 2010.05.11. Added by tynli. */
SetBcnCtrlReg23a(padapter, BIT(3), BIT(4));
/* To make sure that if there exists an adapter which would like to send beacon. */
/* If exists, the origianl value of 0x422[6] will be 1, we should check this to */
/* prevent from setting 0x422[6] to 0 after download reserved page, or it will cause */
/* the beacon cannot be sent by HW. */
/* 2010.06.23. Added by tynli. */
if (bRecover) {
rtl8723au_write8(padapter, REG_FWHW_TXQ_CTRL + 2,
pHalData->RegFwHwTxQCtrl | BIT(6));
pHalData->RegFwHwTxQCtrl |= BIT(6);
}
/* Clear CR[8] or beacon packet will not be send to TxBuf anymore. */
v8 = rtl8723au_read8(padapter, REG_CR+1);
v8 &= ~BIT(0); /* ~ENSWBCN */
rtl8723au_write8(padapter, REG_CR+1, v8);
}
JoinBssRptParm.OpMode = mstatus;
FillH2CCmd(padapter, JOINBSS_RPT_EID, sizeof(JoinBssRptParm), (u8 *)&JoinBssRptParm);
}
