/* C64-specific initialization. */
int machine_specific_init(void)
{
int delay;
scpu64_log = log_open("SCPU64");
if (mem_load() < 0) {
return -1;
}
event_init();
/* Setup trap handling. */
traps_init();
if (!video_disabled_mode) {
joystick_init();
}
gfxoutput_init();
/* Initialize serial traps. */
if (serial_init(scpu64_serial_traps) < 0) {
return -1;
}
serial_trap_init(0xa4);
serial_iec_bus_init();
/* Initialize RS232 handler. */
rs232drv_init();
c64_rsuser_init();
/* Initialize print devices. */
printer_init();
/* Fire up the hardware-level drive emulation. */
drive_init();
disk_image_init();
resources_get_int("AutostartDelay", &delay);
if (delay == 0) {
delay = 3; /* default */
}
/* Initialize autostart. */
autostart_init((CLOCK)(delay * SCPU64_PAL_RFSH_PER_SEC * SCPU64_PAL_CYCLES_PER_RFSH), 1, 0xcc, 0xd1, 0xd3, 0xd5);
#ifdef USE_BEOS_UI
/* Pre-init C64-specific parts of the menus before vicii_init()
creates a canvas window with a menubar at the top. This could
also be used by other ports, e.g. GTK+... */
if (!console_mode) {
scpu64ui_init_early();
}
#endif
if (vicii_init(VICII_STANDARD) == NULL && !video_disabled_mode) {
return -1;
}
scpu64_mem_init();
cia1_init(machine_context.cia1);
cia2_init(machine_context.cia2);
#ifndef COMMON_KBD
/* Initialize the keyboard. */
if (c64_kbd_init() < 0) {
return -1;
}
#endif
c64keyboard_init();
scpu64_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec, machine_timing.cycles_per_sec);
/* Initialize native sound chip */
sid_sound_chip_init();
/* Initialize cartridge based sound chips */
cartridge_sound_chip_init();
/* Initialize userport based sound chips */
userport_dac_sound_chip_init();
drive_sound_init();
video_sound_init();
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
/* Initialize keyboard buffer. */
kbdbuf_init(631, 198, 10, (CLOCK)(machine_timing.rfsh_per_sec * machine_timing.cycles_per_rfsh));
/* Initialize the C64-specific I/O */
c64io_init();
/* Initialize the C64-specific part of the UI. */
if (!console_mode) {
scpu64ui_init();
}
/* Initialize glue logic. */
scpu64_glue_init();
#ifdef HAVE_MOUSE
/* Initialize mouse support (if present). */
mouse_init();
#ifdef HAVE_LIGHTPEN
/* Initialize lightpen support and register VICII callbacks */
lightpen_init();
lightpen_register_timing_callback(vicii_lightpen_timing, 0);
lightpen_register_trigger_callback(vicii_trigger_light_pen);
#endif
#endif
c64iec_init();
c64fastiec_init();
cartridge_init();
machine_drive_stub();
#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
{
/* set fullscreen if user used `-fullscreen' on cmdline */
int fs;
resources_get_int("UseFullscreen", &fs);
if (fs) {
resources_set_int("VICIIFullscreen", 1);
}
}
#endif
return 0;
}
/* C128-specific initialization. */
int machine_specific_init(void)
{
c128_log = log_open("C128");
if (mem_load() < 0) {
return -1;
}
if (z80mem_load() < 0) {
return -1;
}
/* Setup trap handling. */
traps_init();
/* Initialize serial traps. */
if (serial_init(c128_serial_traps) < 0) {
return -1;
}
serial_trap_init(0xa4);
serial_iec_bus_init();
/* initialize RS232 handler */
rs232drv_init();
c64_rsuser_init();
/* initialize print devices */
printer_init();
/* Initialize the tape emulation. */
machine_tape_init_c128();
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level drive emulation. */
drive_init();
/* Initialize autostart. FIXME: at least 0xa26 is only for 40 cols */
autostart_init((CLOCK)(3 * C128_PAL_RFSH_PER_SEC * C128_PAL_CYCLES_PER_RFSH), 1, 0xa27, 0xe0, 0xec, 0xee);
if (vdc_init() == NULL) {
return -1;
}
if (vicii_init(VICII_EXTENDED) == NULL) {
return -1;
}
cia1_init(machine_context.cia1);
cia2_init(machine_context.cia2);
#ifndef COMMON_KBD
/* Initialize the keyboard. */
if (c128_kbd_init() < 0) {
return -1;
}
#endif
c64keyboard_init();
c128_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec, machine_timing.cycles_per_sec);
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
/* Initialize keyboard buffer. */
kbdbuf_init(842, 208, 10, (CLOCK)(machine_timing.rfsh_per_sec * machine_timing.cycles_per_rfsh));
/* Initialize the C128-specific part of the UI. */
c128ui_init();
#ifdef HAVE_MOUSE
/* Initialize mouse support (if present). */
mouse_init();
/* Initialize lightpen support and register VICII/VDC callbacks */
lightpen_init();
lightpen_register_timing_callback(vicii_lightpen_timing, 1);
lightpen_register_timing_callback(vdc_lightpen_timing, 0);
lightpen_register_trigger_callback(c128_trigger_light_pen);
#endif
c64iec_init();
c128fastiec_init();
cartridge_init();
mmu_init();
machine_drive_stub();
#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
{
/* set fullscreen if user used `-fullscreen' on cmdline
use VICII as default */
int fs;
resources_get_int("UseFullscreen", &fs);
if (fs) {
resources_get_int("40/80ColumnKey", &fs);
if (fs == 1) {
resources_set_int("VICIIFullscreen", 1);
} else {
resources_set_int("VDCFullscreen", 1);
}
}
}
#endif
return 0;
}
/* C128-specific initialization. */
int machine_specific_init(void)
{
int delay;
c128_log = log_open("C128");
if (mem_load() < 0) {
return -1;
}
event_init();
if (z80mem_load() < 0) {
return -1;
}
/* Setup trap handling. */
traps_init();
/* Initialize serial traps. */
if (serial_init(c128_serial_traps) < 0) {
return -1;
}
serial_trap_init(0xa4);
serial_iec_bus_init();
if (!video_disabled_mode) {
joystick_init();
}
gfxoutput_init();
/* initialize RS232 handler */
rs232drv_init();
c64_rsuser_init();
/* initialize print devices */
printer_init();
/* Initialize the tape emulation. */
machine_tape_init_c128();
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level drive emulation. */
drive_init();
disk_image_init();
/* Initialize autostart. FIXME: at least 0xa26 is only for 40 cols */
resources_get_int("AutostartDelay", &delay);
if (delay == 0) {
delay = 3; /* default */
}
autostart_init((CLOCK)(delay * C128_PAL_RFSH_PER_SEC * C128_PAL_CYCLES_PER_RFSH), 1, 0xa27, 0xe0, 0xec, 0xee);
#ifdef USE_BEOS_UI
/* Pre-init C128-specific parts of the menus before vdc_init() and
vicii_init() create canvas windows with menubars at the top. This
could also be used by other ports, e.g. GTK+... */
c128ui_init_early();
#endif
if (vdc_init() == NULL) {
return -1;
}
if (vicii_init(VICII_EXTENDED) == NULL) {
return -1;
}
cia1_init(machine_context.cia1);
cia2_init(machine_context.cia2);
#ifndef COMMON_KBD
/* Initialize the keyboard. */
if (c128_kbd_init() < 0) {
return -1;
}
#endif
c64keyboard_init();
c128_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec, machine_timing.cycles_per_sec);
/* Initialize native sound chip */
sid_sound_chip_init();
/* Initialize cartridge based sound chips */
cartridge_sound_chip_init();
drive_sound_init();
video_sound_init();
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
/* Initialize keyboard buffer. */
kbdbuf_init(842, 208, 10, (CLOCK)(machine_timing.rfsh_per_sec * machine_timing.cycles_per_rfsh));
/* Initialize the C128-specific I/O */
c128io_init();
/* Initialize the C128-specific part of the UI. */
c128ui_init();
#ifdef HAVE_MOUSE
/* Initialize mouse support (if present). */
mouse_init();
#ifdef HAVE_LIGHTPEN
/* Initialize lightpen support and register VICII/VDC callbacks */
lightpen_init();
lightpen_register_timing_callback(vicii_lightpen_timing, 1);
lightpen_register_timing_callback(vdc_lightpen_timing, 0);
lightpen_register_trigger_callback(c128_trigger_light_pen);
#endif
#endif
c64iec_init();
c128fastiec_init();
cartridge_init();
mmu_init();
machine_drive_stub();
#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
{
/* set fullscreen if user used `-fullscreen' on cmdline
use VICII as default */
int fs;
resources_get_int("UseFullscreen", &fs);
if (fs) {
resources_get_int("40/80ColumnKey", &fs);
if (fs == 1) {
resources_set_int("VICIIFullscreen", 1);
} else {
resources_set_int("VDCFullscreen", 1);
}
}
}
#endif
return 0;
}
/* C64-specific initialization. */
int machine_specific_init(void)
{
int delay;
c64_log = log_open("C64");
if (mem_load() < 0) {
return -1;
}
/* Setup trap handling. */
traps_init();
/* Initialize serial traps. */
if (serial_init(c64_serial_traps) < 0) {
return -1;
}
serial_trap_init(0xa4);
serial_iec_bus_init();
/* Initialize RS232 handler. */
rs232drv_init();
c64_rsuser_init();
/* Initialize print devices. */
printer_init();
/* Initialize the tape emulation. */
tape_init(&tapeinit);
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level drive emulation. */
drive_init();
resources_get_int("AutostartDelay", &delay);
if (delay == 0) {
delay = 3; /* default */
}
/* Initialize autostart. */
autostart_init((CLOCK)(delay * C64_PAL_RFSH_PER_SEC * C64_PAL_CYCLES_PER_RFSH), 1, 0xcc, 0xd1, 0xd3, 0xd5);
if (vicii_init(VICII_STANDARD) == NULL && !video_disabled_mode) {
return -1;
}
c64_mem_init();
cia1_init(machine_context.cia1);
cia2_init(machine_context.cia2);
#ifndef COMMON_KBD
/* Initialize the keyboard. */
if (c64_kbd_init() < 0) {
return -1;
}
#endif
c64keyboard_init();
c64_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec, machine_timing.cycles_per_sec);
/* Initialize native sound chip */
sid_sound_chip_init();
/* Initialize cartridge based sound chips */
cartridge_sound_chip_init();
drive_sound_init();
video_sound_init();
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
/* Initialize keyboard buffer. */
kbdbuf_init(631, 198, 10, (CLOCK)(machine_timing.rfsh_per_sec * machine_timing.cycles_per_rfsh));
/* Initialize the C64-specific I/O */
c64io_init();
/* Initialize the C64-specific part of the UI. */
if (!console_mode) {
if (machine_class == VICE_MACHINE_C64SC) {
c64scui_init();
} else {
c64ui_init();
}
}
/* Initialize glue logic. */
c64_glue_init();
/* Initialize the +60K. */
plus60k_init();
/* Initialize the +256K. */
plus256k_init();
/* Initialize the C64 256K. */
c64_256k_init();
#ifdef HAVE_MOUSE
/* Initialize mouse support (if present). */
mouse_init();
/* Initialize lightpen support and register VICII callbacks */
lightpen_init();
lightpen_register_timing_callback(vicii_lightpen_timing, 0);
lightpen_register_trigger_callback(vicii_trigger_light_pen);
#endif
c64iec_init();
c64fastiec_init();
cartridge_init();
machine_drive_stub();
#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
{
/* set fullscreen if user used `-fullscreen' on cmdline */
int fs;
resources_get_int("UseFullscreen", &fs);
if (fs) {
resources_set_int("VICIIFullscreen", 1);
}
}
#endif
return 0;
}
/* CBM-II-specific initialization. */
int machine_specific_init(void)
{
cbm2_log = log_open("CBM2");
cbm2_init_ok = 1;
event_init();
/* Setup trap handling - must be before mem_load() */
traps_init();
if (mem_load() < 0) {
return -1;
}
if (!video_disabled_mode) {
joystick_init();
}
gfxoutput_init();
#ifdef HAVE_MOUSE
/* Initialize mouse support (if present). */
mouse_init();
#if 0
/* Initialize lightpen support and register VICII callbacks */
lightpen_init();
lightpen_register_timing_callback(vicii_lightpen_timing, 0);
lightpen_register_trigger_callback(vicii_trigger_light_pen);
#endif
#endif
rs232drv_init();
/* initialize print devices */
printer_init();
#ifdef USE_BEOS_UI
/* Pre-init CBM-II-specific parts of the menus before vicii_init()
creates a canvas window with a menubar at the top. This could
also be used by other ports, e.g. GTK+... */
cbm5x0ui_init_early();
#endif
if (vicii_init(VICII_STANDARD) == NULL) {
return -1;
}
/*
c500_set_phi1_bank(15);
c500_set_phi2_bank(15);
*/
c500_powerline_clk_alarm = alarm_new(maincpu_alarm_context,
"C500PowerlineClk",
c500_powerline_clk_alarm_handler,
NULL);
clk_guard_add_callback(maincpu_clk_guard,
c500_powerline_clk_overflow_callback, NULL);
machine_timing.cycles_per_sec = C500_PAL_CYCLES_PER_SEC;
machine_timing.rfsh_per_sec = C500_PAL_RFSH_PER_SEC;
machine_timing.cycles_per_rfsh = C500_PAL_CYCLES_PER_RFSH;
cia1_init(machine_context.cia1);
acia1_init();
tpi1_init(machine_context.tpi1);
tpi2_init(machine_context.tpi2);
#ifndef COMMON_KBD
/* Initialize the keyboard. */
if (cbm2_kbd_init() < 0) {
return -1;
}
#endif
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level 1541 emulation. */
drive_init();
disk_image_init();
cbm2_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
machine_timing.cycles_per_sec);
/* Initialize native sound chip */
sid_sound_chip_init();
drive_sound_init();
video_sound_init();
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
/* Initialize keyboard buffer.
This appears to work but doesn't account for banking. */
kbdbuf_init(939, 209, 10, (CLOCK)(machine_timing.rfsh_per_sec * machine_timing.cycles_per_rfsh));
/* Initialize the CBM-II-specific part of the UI. */
cbm5x0ui_init();
cbm2iec_init();
machine_drive_stub();
/* Initialize the CBM5x0-specific I/O */
cbm5x0io_init();
#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
{
/* set fullscreen if user used `-fullscreen' on cmdline */
int fs;
resources_get_int("UseFullscreen", &fs);
if (fs) {
resources_set_int("VICIIFullscreen", 1);
}
}
#endif
return 0;
}
/* VIC20-specific initialization. */
int machine_specific_init(void)
{
int delay;
vic20_log = log_open("VIC20");
if (mem_load() < 0) {
return -1;
}
event_init();
/* Setup trap handling. */
traps_init();
if (!video_disabled_mode) {
joystick_init();
}
gfxoutput_init();
/* Initialize serial traps. If user does not want them, or if the
``drive'' emulation is used, do not install them. */
if (serial_init(vic20_serial_traps) < 0) {
return -1;
}
serial_trap_init(0xa4);
serial_iec_bus_init();
/* Initialize RS232 handler. */
rs232drv_init();
vic20_rsuser_init();
/* initialize print devices. */
printer_init();
/* Initialize the tape emulation. */
tape_init(&tapeinit);
/* Initialize the datasette emulation. */
datasette_init();
/* Fire up the hardware-level drive emulation. */
drive_init();
disk_image_init();
/* Initialize autostart. */
resources_get_int("AutostartDelay", &delay);
if (delay == 0) {
delay = 3; /* default */
}
autostart_init((CLOCK)
(delay * VIC20_PAL_RFSH_PER_SEC * VIC20_PAL_CYCLES_PER_RFSH),
1, 0xcc, 0xd1, 0xd3, 0xd5);
#ifdef USE_BEOS_UI
/* Pre-init VIC20-specific parts of the menus before vic_init()
creates a canvas window with a menubar at the top. This could
also be used by other ports, e.g. GTK+... */
vic20ui_init_early();
#endif
/* Initialize the VIC-I emulation. */
if (vic_init() == NULL) {
return -1;
}
via1_init(machine_context.via1);
via2_init(machine_context.via2);
ieeevia1_init(machine_context.ieeevia1);
ieeevia2_init(machine_context.ieeevia2);
#ifndef COMMON_KBD
/* Load the default keymap file. */
if (vic20_kbd_init() < 0) {
return -1;
}
#endif
vic20_monitor_init();
/* Initialize vsync and register our hook function. */
vsync_init(machine_vsync_hook);
vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
machine_timing.cycles_per_sec);
/* Initialize native sound chip first */
vic_sound_chip_init();
/* Initialize the sidcart */
sidcart_sound_chip_init();
/* Initialize cartridge based sound chips */
cartridge_sound_chip_init();
/* Initialize userport based sound chips */
userport_dac_sound_chip_init();
drive_sound_init();
video_sound_init();
/* Initialize sound. Notice that this does not really open the audio
device yet. */
sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);
/* Initialize keyboard buffer. */
kbdbuf_init(631, 198, 10, (CLOCK)(machine_timing.cycles_per_rfsh * machine_timing.rfsh_per_sec));
/* Initialize the VIC20-specific part of the UI. */
vic20ui_init();
vic20iec_init();
cartridge_init();
#ifdef HAVE_MOUSE
mouse_init();
#ifdef HAVE_LIGHTPEN
/* Initialize lightpen support and register VIC-I callbacks */
lightpen_init();
lightpen_register_timing_callback(vic_lightpen_timing, 0);
lightpen_register_trigger_callback(vic_trigger_light_pen);
#endif
#endif
/* Register joystick callback (for lightpen triggering via fire button) */
joystick_register_machine(via2_check_lightpen);
#ifdef HAVE_MIDI
midi_init();
#endif
machine_drive_stub();
#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
{
/* set fullscreen if user used `-fullscreen' on cmdline */
int fs;
resources_get_int("UseFullscreen", &fs);
if (fs) {
resources_set_int("VICFullscreen", 1);
}
}
#endif
return 0;
}
