Пример #1
0
/* C64-specific initialization.  */
int machine_specific_init(void)
{
    int delay;

    scpu64_log = log_open("SCPU64");

    if (mem_load() < 0) {
        return -1;
    }

    event_init();

    /* Setup trap handling.  */
    traps_init();

    if (!video_disabled_mode) {
        joystick_init();
    }

    gfxoutput_init();

    /* Initialize serial traps.  */
    if (serial_init(scpu64_serial_traps) < 0) {
        return -1;
    }

    serial_trap_init(0xa4);
    serial_iec_bus_init();

    /* Initialize RS232 handler.  */
    rs232drv_init();
    c64_rsuser_init();

    /* Initialize print devices.  */
    printer_init();

    /* Fire up the hardware-level drive emulation.  */
    drive_init();

    disk_image_init();

    resources_get_int("AutostartDelay", &delay);
    if (delay == 0) {
        delay = 3; /* default */
    }

    /* Initialize autostart.  */
    autostart_init((CLOCK)(delay * SCPU64_PAL_RFSH_PER_SEC * SCPU64_PAL_CYCLES_PER_RFSH), 1, 0xcc, 0xd1, 0xd3, 0xd5);

#ifdef USE_BEOS_UI
    /* Pre-init C64-specific parts of the menus before vicii_init()
       creates a canvas window with a menubar at the top. This could
       also be used by other ports, e.g. GTK+...  */
    if (!console_mode) {
        scpu64ui_init_early();
    }
#endif

    if (vicii_init(VICII_STANDARD) == NULL && !video_disabled_mode) {
        return -1;
    }

    scpu64_mem_init();

    cia1_init(machine_context.cia1);
    cia2_init(machine_context.cia2);

#ifndef COMMON_KBD
    /* Initialize the keyboard.  */
    if (c64_kbd_init() < 0) {
        return -1;
    }
#endif
    c64keyboard_init();

    scpu64_monitor_init();

    /* Initialize vsync and register our hook function.  */
    vsync_init(machine_vsync_hook);
    vsync_set_machine_parameter(machine_timing.rfsh_per_sec, machine_timing.cycles_per_sec);

    /* Initialize native sound chip */
    sid_sound_chip_init();

    /* Initialize cartridge based sound chips */
    cartridge_sound_chip_init();

    /* Initialize userport based sound chips */
    userport_dac_sound_chip_init();

    drive_sound_init();
    video_sound_init();

    /* Initialize sound.  Notice that this does not really open the audio
       device yet.  */
    sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);

    /* Initialize keyboard buffer.  */
    kbdbuf_init(631, 198, 10, (CLOCK)(machine_timing.rfsh_per_sec * machine_timing.cycles_per_rfsh));

    /* Initialize the C64-specific I/O */
    c64io_init();

    /* Initialize the C64-specific part of the UI.  */
    if (!console_mode) {
        scpu64ui_init();
    }

    /* Initialize glue logic.  */
    scpu64_glue_init();

#ifdef HAVE_MOUSE
    /* Initialize mouse support (if present).  */
    mouse_init();

#ifdef HAVE_LIGHTPEN
    /* Initialize lightpen support and register VICII callbacks */
    lightpen_init();
    lightpen_register_timing_callback(vicii_lightpen_timing, 0);
    lightpen_register_trigger_callback(vicii_trigger_light_pen);
#endif
#endif
    c64iec_init();
    c64fastiec_init();

    cartridge_init();

    machine_drive_stub();
#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
    {
        /* set fullscreen if user used `-fullscreen' on cmdline */
        int fs;
        resources_get_int("UseFullscreen", &fs);
        if (fs) {
            resources_set_int("VICIIFullscreen", 1);
        }
    }
#endif

    return 0;
}
Пример #2
0
/* C128-specific initialization.  */
int machine_specific_init(void)
{
    c128_log = log_open("C128");

    if (mem_load() < 0) {
        return -1;
    }

    if (z80mem_load() < 0) {
        return -1;
    }

    /* Setup trap handling.  */
    traps_init();

    /* Initialize serial traps.  */
    if (serial_init(c128_serial_traps) < 0) {
        return -1;
    }

    serial_trap_init(0xa4);
    serial_iec_bus_init();

    /* initialize RS232 handler */
    rs232drv_init();
    c64_rsuser_init();

    /* initialize print devices */
    printer_init();

    /* Initialize the tape emulation.  */
    machine_tape_init_c128();

    /* Initialize the datasette emulation.  */
    datasette_init();

    /* Fire up the hardware-level drive emulation.  */
    drive_init();

    /* Initialize autostart. FIXME: at least 0xa26 is only for 40 cols */
    autostart_init((CLOCK)(3 * C128_PAL_RFSH_PER_SEC * C128_PAL_CYCLES_PER_RFSH), 1, 0xa27, 0xe0, 0xec, 0xee);

    if (vdc_init() == NULL) {
        return -1;
    }

    if (vicii_init(VICII_EXTENDED) == NULL) {
        return -1;
    }

    cia1_init(machine_context.cia1);
    cia2_init(machine_context.cia2);

#ifndef COMMON_KBD
    /* Initialize the keyboard.  */
    if (c128_kbd_init() < 0) {
        return -1;
    }
#endif

    c64keyboard_init();

    c128_monitor_init();

    /* Initialize vsync and register our hook function.  */
    vsync_init(machine_vsync_hook);
    vsync_set_machine_parameter(machine_timing.rfsh_per_sec, machine_timing.cycles_per_sec);

    /* Initialize sound.  Notice that this does not really open the audio
       device yet.  */
    sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);

    /* Initialize keyboard buffer.  */
    kbdbuf_init(842, 208, 10, (CLOCK)(machine_timing.rfsh_per_sec * machine_timing.cycles_per_rfsh));

    /* Initialize the C128-specific part of the UI.  */
    c128ui_init();

#ifdef HAVE_MOUSE
    /* Initialize mouse support (if present).  */
    mouse_init();

    /* Initialize lightpen support and register VICII/VDC callbacks */
    lightpen_init();
    lightpen_register_timing_callback(vicii_lightpen_timing, 1);
    lightpen_register_timing_callback(vdc_lightpen_timing, 0);
    lightpen_register_trigger_callback(c128_trigger_light_pen);
#endif

    c64iec_init();
    c128fastiec_init();

    cartridge_init();

    mmu_init();

    machine_drive_stub();

#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
    {
        /* set fullscreen if user used `-fullscreen' on cmdline 
           use VICII as default */
        int fs;

        resources_get_int("UseFullscreen", &fs);
        if (fs) {
            resources_get_int("40/80ColumnKey", &fs);
            if (fs == 1) {
                resources_set_int("VICIIFullscreen", 1);
            } else {
                resources_set_int("VDCFullscreen", 1);
            }
        }
    }
#endif

    return 0;
}
Пример #3
0
/* C128-specific initialization.  */
int machine_specific_init(void)
{
    int delay;

    c128_log = log_open("C128");

    if (mem_load() < 0) {
        return -1;
    }

    event_init();

    if (z80mem_load() < 0) {
        return -1;
    }

    /* Setup trap handling.  */
    traps_init();

    /* Initialize serial traps.  */
    if (serial_init(c128_serial_traps) < 0) {
        return -1;
    }

    serial_trap_init(0xa4);
    serial_iec_bus_init();

    if (!video_disabled_mode) {
        joystick_init();
    }

    gfxoutput_init();

    /* initialize RS232 handler */
    rs232drv_init();
    c64_rsuser_init();

    /* initialize print devices */
    printer_init();

    /* Initialize the tape emulation.  */
    machine_tape_init_c128();

    /* Initialize the datasette emulation.  */
    datasette_init();

    /* Fire up the hardware-level drive emulation.  */
    drive_init();

    disk_image_init();

    /* Initialize autostart. FIXME: at least 0xa26 is only for 40 cols */
    resources_get_int("AutostartDelay", &delay);
    if (delay == 0) {
        delay = 3; /* default */
    }
    autostart_init((CLOCK)(delay * C128_PAL_RFSH_PER_SEC * C128_PAL_CYCLES_PER_RFSH), 1, 0xa27, 0xe0, 0xec, 0xee);

#ifdef USE_BEOS_UI
    /* Pre-init C128-specific parts of the menus before vdc_init() and
       vicii_init() create canvas windows with menubars at the top. This
       could also be used by other ports, e.g. GTK+...  */
    c128ui_init_early();
#endif

    if (vdc_init() == NULL) {
        return -1;
    }

    if (vicii_init(VICII_EXTENDED) == NULL) {
        return -1;
    }

    cia1_init(machine_context.cia1);
    cia2_init(machine_context.cia2);

#ifndef COMMON_KBD
    /* Initialize the keyboard.  */
    if (c128_kbd_init() < 0) {
        return -1;
    }
#endif

    c64keyboard_init();

    c128_monitor_init();

    /* Initialize vsync and register our hook function.  */
    vsync_init(machine_vsync_hook);
    vsync_set_machine_parameter(machine_timing.rfsh_per_sec, machine_timing.cycles_per_sec);

    /* Initialize native sound chip */
    sid_sound_chip_init();

    /* Initialize cartridge based sound chips */
    cartridge_sound_chip_init();

    drive_sound_init();
    video_sound_init();

    /* Initialize sound.  Notice that this does not really open the audio
       device yet.  */
    sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);

    /* Initialize keyboard buffer.  */
    kbdbuf_init(842, 208, 10, (CLOCK)(machine_timing.rfsh_per_sec * machine_timing.cycles_per_rfsh));

    /* Initialize the C128-specific I/O */
    c128io_init();

    /* Initialize the C128-specific part of the UI.  */
    c128ui_init();

#ifdef HAVE_MOUSE
    /* Initialize mouse support (if present).  */
    mouse_init();

#ifdef HAVE_LIGHTPEN
    /* Initialize lightpen support and register VICII/VDC callbacks */
    lightpen_init();
    lightpen_register_timing_callback(vicii_lightpen_timing, 1);
    lightpen_register_timing_callback(vdc_lightpen_timing, 0);
    lightpen_register_trigger_callback(c128_trigger_light_pen);
#endif
#endif

    c64iec_init();
    c128fastiec_init();

    cartridge_init();

    mmu_init();

    machine_drive_stub();

#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
    {
        /* set fullscreen if user used `-fullscreen' on cmdline
           use VICII as default */
        int fs;

        resources_get_int("UseFullscreen", &fs);
        if (fs) {
            resources_get_int("40/80ColumnKey", &fs);
            if (fs == 1) {
                resources_set_int("VICIIFullscreen", 1);
            } else {
                resources_set_int("VDCFullscreen", 1);
            }
        }
    }
#endif

    return 0;
}
Пример #4
0
/* C64-specific initialization.  */
int machine_specific_init(void)
{
    int delay;

    c64_log = log_open("C64");

    if (mem_load() < 0) {
        return -1;
    }

    /* Setup trap handling.  */
    traps_init();

    /* Initialize serial traps.  */
    if (serial_init(c64_serial_traps) < 0) {
        return -1;
    }

    serial_trap_init(0xa4);
    serial_iec_bus_init();

    /* Initialize RS232 handler.  */
    rs232drv_init();
    c64_rsuser_init();

    /* Initialize print devices.  */
    printer_init();

    /* Initialize the tape emulation.  */
    tape_init(&tapeinit);

    /* Initialize the datasette emulation.  */
    datasette_init();

    /* Fire up the hardware-level drive emulation.  */
    drive_init();

    resources_get_int("AutostartDelay", &delay);
    if (delay == 0) {
        delay = 3; /* default */
    }

    /* Initialize autostart.  */
    autostart_init((CLOCK)(delay * C64_PAL_RFSH_PER_SEC * C64_PAL_CYCLES_PER_RFSH), 1, 0xcc, 0xd1, 0xd3, 0xd5);

    if (vicii_init(VICII_STANDARD) == NULL && !video_disabled_mode) {
        return -1;
    }

    c64_mem_init();

    cia1_init(machine_context.cia1);
    cia2_init(machine_context.cia2);

#ifndef COMMON_KBD
    /* Initialize the keyboard.  */
    if (c64_kbd_init() < 0) {
        return -1;
    }
#endif
    c64keyboard_init();

    c64_monitor_init();

    /* Initialize vsync and register our hook function.  */
    vsync_init(machine_vsync_hook);
    vsync_set_machine_parameter(machine_timing.rfsh_per_sec, machine_timing.cycles_per_sec);

    /* Initialize native sound chip */
    sid_sound_chip_init();

    /* Initialize cartridge based sound chips */
    cartridge_sound_chip_init();

    drive_sound_init();
    video_sound_init();

    /* Initialize sound.  Notice that this does not really open the audio
       device yet.  */
    sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);

    /* Initialize keyboard buffer.  */
    kbdbuf_init(631, 198, 10, (CLOCK)(machine_timing.rfsh_per_sec * machine_timing.cycles_per_rfsh));

    /* Initialize the C64-specific I/O */
    c64io_init();

    /* Initialize the C64-specific part of the UI.  */
    if (!console_mode) {
        if (machine_class == VICE_MACHINE_C64SC) {
            c64scui_init();
        } else {
            c64ui_init();
        }
    }

    /* Initialize glue logic.  */
    c64_glue_init();

    /* Initialize the +60K.  */
    plus60k_init();

    /* Initialize the +256K.  */
    plus256k_init();

    /* Initialize the C64 256K.  */
    c64_256k_init();

#ifdef HAVE_MOUSE
    /* Initialize mouse support (if present).  */
    mouse_init();

    /* Initialize lightpen support and register VICII callbacks */
    lightpen_init();
    lightpen_register_timing_callback(vicii_lightpen_timing, 0);
    lightpen_register_trigger_callback(vicii_trigger_light_pen);
#endif
    c64iec_init();
    c64fastiec_init();

    cartridge_init();

    machine_drive_stub();
#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
    {
        /* set fullscreen if user used `-fullscreen' on cmdline */
        int fs;
        resources_get_int("UseFullscreen", &fs);
        if (fs) {
            resources_set_int("VICIIFullscreen", 1);
        }
    }
#endif

    return 0;
}
Пример #5
0
/* CBM-II-specific initialization.  */
int machine_specific_init(void)
{
    cbm2_log = log_open("CBM2");

    cbm2_init_ok = 1;

    event_init();

    /* Setup trap handling - must be before mem_load() */
    traps_init();

    if (mem_load() < 0) {
        return -1;
    }

    if (!video_disabled_mode) {
        joystick_init();
    }

    gfxoutput_init();

#ifdef HAVE_MOUSE
    /* Initialize mouse support (if present).  */
    mouse_init();

#if 0
    /* Initialize lightpen support and register VICII callbacks */
    lightpen_init();
    lightpen_register_timing_callback(vicii_lightpen_timing, 0);
    lightpen_register_trigger_callback(vicii_trigger_light_pen);
#endif
#endif

    rs232drv_init();

    /* initialize print devices */
    printer_init();

#ifdef USE_BEOS_UI
    /* Pre-init CBM-II-specific parts of the menus before vicii_init()
       creates a canvas window with a menubar at the top. This could
       also be used by other ports, e.g. GTK+...  */
    cbm5x0ui_init_early();
#endif

    if (vicii_init(VICII_STANDARD) == NULL) {
        return -1;
    }
    /*
    c500_set_phi1_bank(15);
    c500_set_phi2_bank(15);
    */

    c500_powerline_clk_alarm = alarm_new(maincpu_alarm_context,
                                         "C500PowerlineClk",
                                         c500_powerline_clk_alarm_handler,
                                         NULL);
    clk_guard_add_callback(maincpu_clk_guard,
                           c500_powerline_clk_overflow_callback, NULL);
    machine_timing.cycles_per_sec = C500_PAL_CYCLES_PER_SEC;
    machine_timing.rfsh_per_sec = C500_PAL_RFSH_PER_SEC;
    machine_timing.cycles_per_rfsh = C500_PAL_CYCLES_PER_RFSH;

    cia1_init(machine_context.cia1);
    acia1_init();
    tpi1_init(machine_context.tpi1);
    tpi2_init(machine_context.tpi2);

#ifndef COMMON_KBD
    /* Initialize the keyboard.  */
    if (cbm2_kbd_init() < 0) {
        return -1;
    }
#endif

    /* Initialize the datasette emulation.  */
    datasette_init();

    /* Fire up the hardware-level 1541 emulation.  */
    drive_init();

    disk_image_init();

    cbm2_monitor_init();

    /* Initialize vsync and register our hook function.  */
    vsync_init(machine_vsync_hook);
    vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
                                machine_timing.cycles_per_sec);

    /* Initialize native sound chip */
    sid_sound_chip_init();

    drive_sound_init();
    video_sound_init();

    /* Initialize sound.  Notice that this does not really open the audio
       device yet.  */
    sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);

    /* Initialize keyboard buffer.
       This appears to work but doesn't account for banking. */
    kbdbuf_init(939, 209, 10, (CLOCK)(machine_timing.rfsh_per_sec * machine_timing.cycles_per_rfsh));

    /* Initialize the CBM-II-specific part of the UI.  */
    cbm5x0ui_init();

    cbm2iec_init();

    machine_drive_stub();

    /* Initialize the CBM5x0-specific I/O */
    cbm5x0io_init();

#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
    {
        /* set fullscreen if user used `-fullscreen' on cmdline */
        int fs;
        resources_get_int("UseFullscreen", &fs);
        if (fs) {
            resources_set_int("VICIIFullscreen", 1);
        }
    }
#endif
    return 0;
}
Пример #6
0
/* VIC20-specific initialization.  */
int machine_specific_init(void)
{
    int delay;

    vic20_log = log_open("VIC20");

    if (mem_load() < 0) {
        return -1;
    }

    event_init();

    /* Setup trap handling.  */
    traps_init();

    if (!video_disabled_mode) {
        joystick_init();
    }

    gfxoutput_init();

    /* Initialize serial traps.  If user does not want them, or if the
       ``drive'' emulation is used, do not install them.  */
    if (serial_init(vic20_serial_traps) < 0) {
        return -1;
    }

    serial_trap_init(0xa4);
    serial_iec_bus_init();

    /* Initialize RS232 handler.  */
    rs232drv_init();
    vic20_rsuser_init();

    /* initialize print devices.  */
    printer_init();

    /* Initialize the tape emulation.  */
    tape_init(&tapeinit);

    /* Initialize the datasette emulation.  */
    datasette_init();

    /* Fire up the hardware-level drive emulation. */
    drive_init();

    disk_image_init();

    /* Initialize autostart.  */
    resources_get_int("AutostartDelay", &delay);
    if (delay == 0) {
        delay = 3; /* default */
    }
    autostart_init((CLOCK)
                   (delay * VIC20_PAL_RFSH_PER_SEC * VIC20_PAL_CYCLES_PER_RFSH),
                   1, 0xcc, 0xd1, 0xd3, 0xd5);

#ifdef USE_BEOS_UI
    /* Pre-init VIC20-specific parts of the menus before vic_init()
       creates a canvas window with a menubar at the top. This could
       also be used by other ports, e.g. GTK+...  */
    vic20ui_init_early();
#endif

    /* Initialize the VIC-I emulation.  */
    if (vic_init() == NULL) {
        return -1;
    }

    via1_init(machine_context.via1);
    via2_init(machine_context.via2);

    ieeevia1_init(machine_context.ieeevia1);
    ieeevia2_init(machine_context.ieeevia2);

#ifndef COMMON_KBD
    /* Load the default keymap file.  */
    if (vic20_kbd_init() < 0) {
        return -1;
    }
#endif

    vic20_monitor_init();

    /* Initialize vsync and register our hook function.  */
    vsync_init(machine_vsync_hook);
    vsync_set_machine_parameter(machine_timing.rfsh_per_sec,
                                machine_timing.cycles_per_sec);

    /* Initialize native sound chip first */
    vic_sound_chip_init();

    /* Initialize the sidcart */
    sidcart_sound_chip_init();

    /* Initialize cartridge based sound chips */
    cartridge_sound_chip_init();

    /* Initialize userport based sound chips */
    userport_dac_sound_chip_init();

    drive_sound_init();
    video_sound_init();

    /* Initialize sound.  Notice that this does not really open the audio
       device yet.  */
    sound_init(machine_timing.cycles_per_sec, machine_timing.cycles_per_rfsh);

    /* Initialize keyboard buffer.  */
    kbdbuf_init(631, 198, 10, (CLOCK)(machine_timing.cycles_per_rfsh * machine_timing.rfsh_per_sec));

    /* Initialize the VIC20-specific part of the UI.  */
    vic20ui_init();

    vic20iec_init();

    cartridge_init();

#ifdef HAVE_MOUSE
    mouse_init();

#ifdef HAVE_LIGHTPEN
    /* Initialize lightpen support and register VIC-I callbacks */
    lightpen_init();
    lightpen_register_timing_callback(vic_lightpen_timing, 0);
    lightpen_register_trigger_callback(vic_trigger_light_pen);
#endif
#endif

    /* Register joystick callback (for lightpen triggering via fire button) */
    joystick_register_machine(via2_check_lightpen);

#ifdef HAVE_MIDI
    midi_init();
#endif

    machine_drive_stub();

#if defined (USE_XF86_EXTENSIONS) && (defined(USE_XF86_VIDMODE_EXT) || defined (HAVE_XRANDR))
    {
        /* set fullscreen if user used `-fullscreen' on cmdline */
        int fs;
        resources_get_int("UseFullscreen", &fs);
        if (fs) {
            resources_set_int("VICFullscreen", 1);
        }
    }
#endif
    return 0;
}