double base_rock_level_2d(u64 seed, v2s16 p) { // The base ground level double base = (double)WATER_LEVEL - (double)AVERAGE_MUD_AMOUNT + 20. * noise2d_perlin( 0.5+(float)p.X/500., 0.5+(float)p.Y/500., (seed>>32)+654879876, 6, 0.6); /*// A bit hillier one double base2 = WATER_LEVEL - 4.0 + 40. * noise2d_perlin( 0.5+(float)p.X/250., 0.5+(float)p.Y/250., (seed>>27)+90340, 6, 0.69); if(base2 > base) base = base2;*/ #if 1 // Higher ground level double higher = (double)WATER_LEVEL + 25. + 35. * noise2d_perlin( 0.5+(float)p.X/250., 0.5+(float)p.Y/250., seed+85039, 5, 0.69); //higher = 30; // For debugging // Limit higher to at least base if(higher < base) higher = base; // Steepness factor of cliffs double b = 1.0 + 1.0 * noise2d_perlin( 0.5+(float)p.X/250., 0.5+(float)p.Y/250., seed-932, 7, 0.7); b = rangelim(b, 0.0, 1000.0); b = pow(b, 5); b *= 7; b = rangelim(b, 3.0, 1000.0); //dstream<<"b="<<b<<std::endl; //double b = 20; // Offset to more low double a_off = -0.2; // High/low selector /*double a = 0.5 + b * (a_off + noise2d_perlin( 0.5+(float)p.X/500., 0.5+(float)p.Y/500., seed-359, 6, 0.7));*/ double a = (double)0.5 + b * (a_off + noise2d_perlin( 0.5+(float)p.X/250., 0.5+(float)p.Y/250., seed-359, 5, 0.60)); // Limit a = rangelim(a, 0.0, 1.0); //dstream<<"a="<<a<<std::endl; double h = base*(1.0-a) + higher*a; #else double h = base; #endif return h; }
bool Mapgen::get_have_beach(u64 seed, v2s16 p2d) { double sandnoise = noise2d_perlin( 0.2+(float)p2d.X/250, 0.7+(float)p2d.Y/250, seed+59420, 3, 0.50); return (sandnoise > 0.15); }
int LuaPerlinNoise::l_get2d(lua_State *L) { LuaPerlinNoise *o = checkobject(L, 1); v2f pos2d = read_v2f(L,2); lua_Number val = noise2d_perlin(pos2d.X/o->scale, pos2d.Y/o->scale, o->seed, o->octaves, o->persistence); lua_pushnumber(L, val); return 1; }
bool get_have_sand(u64 seed, v2s16 p2d) { // Determine whether to have sand here double sandnoise = noise2d_perlin( 0.5+(float)p2d.X/500, 0.5+(float)p2d.Y/500, seed+59420, 3, 0.50); return (sandnoise > -0.15); }
/* Ground density noise shall be interpreted by using this. TODO: No perlin noises here, they should be outsourced and buffered NOTE: The speed of these actually isn't terrible */ bool val_is_ground(double ground_noise1_val, v3s16 p, u64 seed) { //return ((double)p.Y < ground_noise1_val); double f = 0.55 + noise2d_perlin( 0.5+(float)p.X/250, 0.5+(float)p.Z/250, seed+920381, 3, 0.45); if(f < 0.01) f = 0.01; else if(f >= 1.0) f *= 1.6; double h = WATER_LEVEL + 10 * noise2d_perlin( 0.5+(float)p.X/250, 0.5+(float)p.Z/250, seed+84174, 4, 0.5); /*double f = 1; double h = 0;*/ return ((double)p.Y - h < ground_noise1_val * f); }
double Mapgen::tree_amount_2d(u64 seed, v2s16 p) { double noise = noise2d_perlin( 0.5+(float)p.X/125, 0.5+(float)p.Y/125, seed+2, 4, 0.66); double zeroval = -0.39; if(noise < zeroval) return 0; else return 0.04 * (noise-zeroval) / (1.0-zeroval); }
void Clouds::render() { video::IVideoDriver* driver = SceneManager->getVideoDriver(); if(SceneManager->getSceneNodeRenderPass() != scene::ESNRP_TRANSPARENT) //if(SceneManager->getSceneNodeRenderPass() != scene::ESNRP_SOLID) return; ScopeProfiler sp(g_profiler, "Rendering of clouds, avg", SPT_AVG); bool enable_3d = g_settings->getBool("enable_3d_clouds"); int num_faces_to_draw = enable_3d ? 6 : 1; m_material.setFlag(video::EMF_BACK_FACE_CULLING, enable_3d); driver->setTransform(video::ETS_WORLD, AbsoluteTransformation); driver->setMaterial(m_material); /* Clouds move from X+ towards X- */ const s16 cloud_radius_i = 12; const float cloud_size = BS*64; const v2f cloud_speed(0, -BS*2); const float cloud_full_radius = cloud_size * cloud_radius_i; // Position of cloud noise origin in world coordinates v2f world_cloud_origin_pos_f = m_time*cloud_speed; // Position of cloud noise origin from the camera v2f cloud_origin_from_camera_f = world_cloud_origin_pos_f - m_camera_pos; // The center point of drawing in the noise v2f center_of_drawing_in_noise_f = -cloud_origin_from_camera_f; // The integer center point of drawing in the noise v2s16 center_of_drawing_in_noise_i( MYROUND(center_of_drawing_in_noise_f.X / cloud_size), MYROUND(center_of_drawing_in_noise_f.Y / cloud_size) ); // The world position of the integer center point of drawing in the noise v2f world_center_of_drawing_in_noise_f = v2f( center_of_drawing_in_noise_i.X * cloud_size, center_of_drawing_in_noise_i.Y * cloud_size ) + world_cloud_origin_pos_f; /*video::SColor c_top(128,b*240,b*240,b*255); video::SColor c_side_1(128,b*230,b*230,b*255); video::SColor c_side_2(128,b*220,b*220,b*245); video::SColor c_bottom(128,b*205,b*205,b*230);*/ video::SColorf c_top_f(m_color); video::SColorf c_side_1_f(m_color); video::SColorf c_side_2_f(m_color); video::SColorf c_bottom_f(m_color); c_side_1_f.r *= 0.95; c_side_1_f.g *= 0.95; c_side_1_f.b *= 0.95; c_side_2_f.r *= 0.90; c_side_2_f.g *= 0.90; c_side_2_f.b *= 0.90; c_bottom_f.r *= 0.80; c_bottom_f.g *= 0.80; c_bottom_f.b *= 0.80; c_top_f.a = 0.9; c_side_1_f.a = 0.9; c_side_2_f.a = 0.9; c_bottom_f.a = 0.9; video::SColor c_top = c_top_f.toSColor(); video::SColor c_side_1 = c_side_1_f.toSColor(); video::SColor c_side_2 = c_side_2_f.toSColor(); video::SColor c_bottom = c_bottom_f.toSColor(); // Get fog parameters for setting them back later video::SColor fog_color(0,0,0,0); video::E_FOG_TYPE fog_type = video::EFT_FOG_LINEAR; f32 fog_start = 0; f32 fog_end = 0; f32 fog_density = 0; bool fog_pixelfog = false; bool fog_rangefog = false; driver->getFog(fog_color, fog_type, fog_start, fog_end, fog_density, fog_pixelfog, fog_rangefog); // Set our own fog driver->setFog(fog_color, fog_type, cloud_full_radius * 0.5, cloud_full_radius*1.2, fog_density, fog_pixelfog, fog_rangefog); // Read noise bool *grid = new bool[cloud_radius_i*2*cloud_radius_i*2]; for(s16 zi=-cloud_radius_i; zi<cloud_radius_i; zi++) for(s16 xi=-cloud_radius_i; xi<cloud_radius_i; xi++) { u32 i = (zi+cloud_radius_i)*cloud_radius_i*2 + xi+cloud_radius_i; v2s16 p_in_noise_i( xi+center_of_drawing_in_noise_i.X, zi+center_of_drawing_in_noise_i.Y ); #if 0 double noise = noise2d_perlin_abs( (float)p_in_noise_i.X*cloud_size/BS/200, (float)p_in_noise_i.Y*cloud_size/BS/200, m_seed, 3, 0.4); grid[i] = (noise >= 0.80); #endif #if 1 double noise = noise2d_perlin( (float)p_in_noise_i.X*cloud_size/BS/200, (float)p_in_noise_i.Y*cloud_size/BS/200, m_seed, 3, 0.5); grid[i] = (noise >= 0.4); #endif } #define GETINDEX(x, z, radius) (((z)+(radius))*(radius)*2 + (x)+(radius)) #define INAREA(x, z, radius) \ ((x) >= -(radius) && (x) < (radius) && (z) >= -(radius) && (z) < (radius)) for(s16 zi0=-cloud_radius_i; zi0<cloud_radius_i; zi0++) for(s16 xi0=-cloud_radius_i; xi0<cloud_radius_i; xi0++) { s16 zi = zi0; s16 xi = xi0; // Draw from front to back (needed for transparency) /*if(zi <= 0) zi = -cloud_radius_i - zi; if(xi <= 0) xi = -cloud_radius_i - xi;*/ // Draw from back to front if(zi >= 0) zi = cloud_radius_i - zi - 1; if(xi >= 0) xi = cloud_radius_i - xi - 1; u32 i = GETINDEX(xi, zi, cloud_radius_i); if(grid[i] == false) continue; v2f p0 = v2f(xi,zi)*cloud_size + world_center_of_drawing_in_noise_f; video::S3DVertex v[4] = { video::S3DVertex(0,0,0, 0,0,0, c_top, 0, 1), video::S3DVertex(0,0,0, 0,0,0, c_top, 1, 1), video::S3DVertex(0,0,0, 0,0,0, c_top, 1, 0), video::S3DVertex(0,0,0, 0,0,0, c_top, 0, 0) }; /*if(zi <= 0 && xi <= 0){ v[0].Color.setBlue(255); v[1].Color.setBlue(255); v[2].Color.setBlue(255); v[3].Color.setBlue(255); }*/ f32 rx = cloud_size/2; f32 ry = 8*BS; f32 rz = cloud_size/2; for(int i=0; i<num_faces_to_draw; i++) { switch(i) { case 0: // top for(int j=0;j<4;j++){ v[j].Normal.set(0,1,0); } v[0].Pos.set(-rx, ry,-rz); v[1].Pos.set(-rx, ry, rz); v[2].Pos.set( rx, ry, rz); v[3].Pos.set( rx, ry,-rz); break; case 1: // back if(INAREA(xi, zi-1, cloud_radius_i)){ u32 j = GETINDEX(xi, zi-1, cloud_radius_i); if(grid[j]) continue; } for(int j=0;j<4;j++){ v[j].Color = c_side_1; v[j].Normal.set(0,0,-1); } v[0].Pos.set(-rx, ry,-rz); v[1].Pos.set( rx, ry,-rz); v[2].Pos.set( rx,-ry,-rz); v[3].Pos.set(-rx,-ry,-rz); break; case 2: //right if(INAREA(xi+1, zi, cloud_radius_i)){ u32 j = GETINDEX(xi+1, zi, cloud_radius_i); if(grid[j]) continue; } for(int j=0;j<4;j++){ v[j].Color = c_side_2; v[j].Normal.set(1,0,0); } v[0].Pos.set( rx, ry,-rz); v[1].Pos.set( rx, ry, rz); v[2].Pos.set( rx,-ry, rz); v[3].Pos.set( rx,-ry,-rz); break; case 3: // front if(INAREA(xi, zi+1, cloud_radius_i)){ u32 j = GETINDEX(xi, zi+1, cloud_radius_i); if(grid[j]) continue; } for(int j=0;j<4;j++){ v[j].Color = c_side_1; v[j].Normal.set(0,0,-1); } v[0].Pos.set( rx, ry, rz); v[1].Pos.set(-rx, ry, rz); v[2].Pos.set(-rx,-ry, rz); v[3].Pos.set( rx,-ry, rz); break; case 4: // left if(INAREA(xi-1, zi, cloud_radius_i)){ u32 j = GETINDEX(xi-1, zi, cloud_radius_i); if(grid[j]) continue; } for(int j=0;j<4;j++){ v[j].Color = c_side_2; v[j].Normal.set(-1,0,0); } v[0].Pos.set(-rx, ry, rz); v[1].Pos.set(-rx, ry,-rz); v[2].Pos.set(-rx,-ry,-rz); v[3].Pos.set(-rx,-ry, rz); break; case 5: // bottom for(int j=0;j<4;j++){ v[j].Color = c_bottom; v[j].Normal.set(0,-1,0); } v[0].Pos.set( rx,-ry, rz); v[1].Pos.set(-rx,-ry, rz); v[2].Pos.set(-rx,-ry,-rz); v[3].Pos.set( rx,-ry,-rz); break; } v3f pos(p0.X, m_cloud_y, p0.Y); pos -= intToFloat(m_camera_offset, BS); for(u16 i=0; i<4; i++) v[i].Pos += pos; u16 indices[] = {0,1,2,2,3,0}; driver->drawVertexPrimitiveList(v, 4, indices, 2, video::EVT_STANDARD, scene::EPT_TRIANGLES, video::EIT_16BIT); } } delete[] grid; // Restore fog settings driver->setFog(fog_color, fog_type, fog_start, fog_end, fog_density, fog_pixelfog, fog_rangefog); }
double get_mud_add_amount(u64 seed, v2s16 p) { return ((float)AVERAGE_MUD_AMOUNT + 3.0 * noise2d_perlin( 0.5+(float)p.X/200, 0.5+(float)p.Y/200, seed+91013, 3, 0.55)); }