/*
** Resize the block of memory pointed to by p to n bytes. If the
** resize fails, set the mallocFailed flag in the connection object.
*/
void *sqlite3DbRealloc(sqlite3 *db, void *p, int n){
void *pNew = 0;
assert( db!=0 );
assert( sqlite3_mutex_held(db->mutex) );
if( db->mallocFailed==0 ){
if( p==0 ){
return sqlite3DbMallocRaw(db, n);
}
if( isLookaside(db, p) ){
if( n<=db->lookaside.sz ){
return p;
}
pNew = sqlite3DbMallocRaw(db, n);
if( pNew ){
memcpy(pNew, p, db->lookaside.sz);
sqlite3DbFree(db, p);
}
}else{
pNew = sqlite3_realloc(p, n);
if( !pNew ){
db->mallocFailed = 1;
}
}
}
return pNew;
}
/*
** Resize the block of memory pointed to by p to n bytes. If the
** resize fails, set the mallocFailed flag in the connection object.
*/
void *sqlite3DbRealloc(sqlite3 *db, void *p, u64 n){
void *pNew = 0;
assert( db!=0 );
assert( sqlite3_mutex_held(db->mutex) );
if( db->mallocFailed==0 ){
if( p==0 ){
return sqlite3DbMallocRaw(db, n);
}
if( isLookaside(db, p) ){
if( n<=db->lookaside.sz ){
return p;
}
pNew = sqlite3DbMallocRaw(db, n);
if( pNew ){
memcpy(pNew, p, db->lookaside.sz);
sqlite3DbFree(db, p);
}
}else{
assert( sqlite3MemdebugHasType(p, (MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) );
assert( sqlite3MemdebugNoType(p, (u8)~(MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) );
sqlite3MemdebugSetType(p, MEMTYPE_HEAP);
pNew = sqlite3_realloc64(p, n);
if( !pNew ){
db->mallocFailed = 1;
}
sqlite3MemdebugSetType(pNew,
(db->lookaside.bEnabled ? MEMTYPE_LOOKASIDE : MEMTYPE_HEAP));
}
}
return pNew;
}
/*
** Initialize iterator pIter to scan through the PMA stored in file pFile
** starting at offset iStart and ending at offset iEof-1. This function
** leaves the iterator pointing to the first key in the PMA (or EOF if the
** PMA is empty).
*/
static int vdbeSorterIterInit(
sqlite3 *db, /* Database handle */
const VdbeSorter *pSorter, /* Sorter object */
i64 iStart, /* Start offset in pFile */
VdbeSorterIter *pIter, /* Iterator to populate */
i64 *pnByte /* IN/OUT: Increment this value by PMA size */
){
int rc = SQLITE_OK;
int nBuf;
nBuf = sqlite3BtreeGetPageSize(db->aDb[0].pBt);
assert( pSorter->iWriteOff>iStart );
assert( pIter->aAlloc==0 );
assert( pIter->aBuffer==0 );
pIter->pFile = pSorter->pTemp1;
pIter->iReadOff = iStart;
pIter->nAlloc = 128;
pIter->aAlloc = (u8 *)sqlite3DbMallocRaw(db, pIter->nAlloc);
pIter->nBuffer = nBuf;
pIter->aBuffer = (u8 *)sqlite3DbMallocRaw(db, nBuf);
if( !pIter->aBuffer ){
rc = SQLITE_NOMEM;
}else{
int iBuf;
iBuf = iStart % nBuf;
if( iBuf ){
int nRead = nBuf - iBuf;
if( (iStart + nRead) > pSorter->iWriteOff ){
nRead = (int)(pSorter->iWriteOff - iStart);
}
rc = sqlite3OsRead(
pSorter->pTemp1, &pIter->aBuffer[iBuf], nRead, iStart
);
assert( rc!=SQLITE_IOERR_SHORT_READ );
}
if( rc==SQLITE_OK ){
u64 nByte; /* Size of PMA in bytes */
pIter->iEof = pSorter->iWriteOff;
rc = vdbeSorterIterVarint(db, pIter, &nByte);
pIter->iEof = pIter->iReadOff + nByte;
*pnByte += nByte;
}
}
if( rc==SQLITE_OK ){
rc = vdbeSorterIterNext(db, pIter);
}
return rc;
}
/*
** Make sure the given Mem is \u0000 terminated.
*/
int sqlite3VdbeMemNulTerminate(Mem *pMem){
assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
if( (pMem->flags & MEM_Term)!=0 || (pMem->flags & MEM_Str)==0 ){
return SQLITE_OK; /* Nothing to do */
}
if( pMem->flags & (MEM_Static|MEM_Ephem) ){
return sqlite3VdbeMemMakeWriteable(pMem);
}else{
char *z;
sqlite3VdbeMemExpandBlob(pMem);
z = sqlite3DbMallocRaw(pMem->db, pMem->n+2);
if( !z ){
return SQLITE_NOMEM;
}
memcpy(z, pMem->z, pMem->n);
z[pMem->n] = 0;
z[pMem->n+1] = 0;
if( pMem->xDel ){
pMem->xDel(pMem->z);
}else{
sqlite3_free(pMem->z);
}
pMem->xDel = 0;
pMem->z = z;
pMem->flags |= MEM_Term;
}
return SQLITE_OK;
}
/*
** Make the given Mem object either MEM_Short or MEM_Dyn so that bytes
** of the Mem.z[] array can be modified.
**
** Return SQLITE_OK on success or SQLITE_NOMEM if malloc fails.
*/
int sqlite3VdbeMemMakeWriteable(Mem *pMem){
int n;
u8 *z;
assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
expandBlob(pMem);
if( (pMem->flags & (MEM_Ephem|MEM_Static))==0 ){
return SQLITE_OK;
}
assert( (pMem->flags & MEM_Dyn)==0 );
assert( pMem->flags & (MEM_Str|MEM_Blob) );
if( (n = pMem->n)+2<sizeof(pMem->zShort) ){
z = (u8*)pMem->zShort;
pMem->flags |= MEM_Short|MEM_Term;
}else{
z = sqlite3DbMallocRaw(pMem->db, n+2 );
if( z==0 ){
return SQLITE_NOMEM;
}
pMem->flags |= MEM_Dyn|MEM_Term;
pMem->xDel = 0;
}
memcpy(z, pMem->z, n );
z[n] = 0;
z[n+1] = 0;
pMem->z = (char*)z;
pMem->flags &= ~(MEM_Ephem|MEM_Static);
assert(0==(1&(int)pMem->z));
return SQLITE_OK;
}
/*
** The implementation of the sqlite_record() function. This function accepts
** a single argument of any type. The return value is a formatted database
** record (a blob) containing the argument value.
**
** This is used to convert the value stored in the 'sample' column of the
** sqlite_stat3 table to the record format SQLite uses internally.
*/
static void recordFunc(
sqlite3_context *context,
int argc,
sqlite3_value **argv
){
const int file_format = 1;
int iSerial; /* Serial type */
int nSerial; /* Bytes of space for iSerial as varint */
int nVal; /* Bytes of space required for argv[0] */
int nRet;
sqlite3 *db;
u8 *aRet;
UNUSED_PARAMETER( argc );
iSerial = sqlite3VdbeSerialType(argv[0], file_format);
nSerial = sqlite3VarintLen(iSerial);
nVal = sqlite3VdbeSerialTypeLen(iSerial);
db = sqlite3_context_db_handle(context);
nRet = 1 + nSerial + nVal;
aRet = sqlite3DbMallocRaw(db, nRet);
if( aRet==0 ){
sqlite3_result_error_nomem(context);
}else{
aRet[0] = nSerial+1;
sqlite3PutVarint(&aRet[1], iSerial);
sqlite3VdbeSerialPut(&aRet[1+nSerial], nVal, argv[0], file_format);
sqlite3_result_blob(context, aRet, nRet, SQLITE_TRANSIENT);
sqlite3DbFree(db, aRet);
}
}
/*
** Add a single new WhereTerm entry to the WhereClause object pWC.
** The new WhereTerm object is constructed from Expr p and with wtFlags.
** The index in pWC->a[] of the new WhereTerm is returned on success.
** 0 is returned if the new WhereTerm could not be added due to a memory
** allocation error. The memory allocation failure will be recorded in
** the db->mallocFailed flag so that higher-level functions can detect it.
**
** This routine will increase the size of the pWC->a[] array as necessary.
**
** If the wtFlags argument includes TERM_DYNAMIC, then responsibility
** for freeing the expression p is assumed by the WhereClause object pWC.
** This is true even if this routine fails to allocate a new WhereTerm.
**
** WARNING: This routine might reallocate the space used to store
** WhereTerms. All pointers to WhereTerms should be invalidated after
** calling this routine. Such pointers may be reinitialized by referencing
** the pWC->a[] array.
*/
static int whereClauseInsert(WhereClause *pWC, Expr *p, u16 wtFlags){
WhereTerm *pTerm;
int idx;
testcase( wtFlags & TERM_VIRTUAL );
if( pWC->nTerm>=pWC->nSlot ){
WhereTerm *pOld = pWC->a;
sqlite3 *db = pWC->pWInfo->pParse->db;
pWC->a = sqlite3DbMallocRaw(db, sizeof(pWC->a[0])*pWC->nSlot*2 );
if( pWC->a==0 ){
if( wtFlags & TERM_DYNAMIC ){
sqlite3ExprDelete(db, p);
}
pWC->a = pOld;
return 0;
}
memcpy(pWC->a, pOld, sizeof(pWC->a[0])*pWC->nTerm);
if( pOld!=pWC->aStatic ){
sqlite3DbFree(db, pOld);
}
pWC->nSlot = sqlite3DbMallocSize(db, pWC->a)/sizeof(pWC->a[0]);
memset(&pWC->a[pWC->nTerm], 0, sizeof(pWC->a[0])*(pWC->nSlot-pWC->nTerm));
}
pTerm = &pWC->a[idx = pWC->nTerm++];
if( p && ExprHasProperty(p, EP_Unlikely) ){
pTerm->truthProb = sqlite3LogEst(p->iTable) - 270;
}else{
pTerm->truthProb = 1;
}
pTerm->pExpr = sqlite3ExprSkipCollate(p);
pTerm->wtFlags = wtFlags;
pTerm->pWC = pWC;
pTerm->iParent = -1;
return idx;
}
static int createModule(
sqlite3 *db, /* Database in which module is registered */
const char *zName, /* Name assigned to this module */
const sqlite3_module *pModule, /* The definition of the module */
void *pAux, /* Context pointer for xCreate/xConnect */
void (*xDestroy)(void *) /* Module destructor function */
) {
int rc, nName;
Module *pMod;
sqlite3_mutex_enter(db->mutex);
nName = strlen(zName);
pMod = (Module *)sqlite3DbMallocRaw(db, sizeof(Module) + nName + 1);
if( pMod ){
char *zCopy = (char *)(&pMod[1]);
memcpy(zCopy, zName, nName+1);
pMod->zName = zCopy;
pMod->pModule = pModule;
pMod->pAux = pAux;
pMod->xDestroy = xDestroy;
pMod = (Module *)sqlite3HashInsert(&db->aModule, zCopy, nName, (void*)pMod);
if( pMod && pMod->xDestroy ){
pMod->xDestroy(pMod->pAux);
}
sqlite3_free(pMod);
sqlite3ResetInternalSchema(db, 0);
}
rc = sqlite3ApiExit(db, SQLITE_OK);
sqlite3_mutex_leave(db->mutex);
return rc;
}
/*
** Make sure pMem->z points to a writable allocation of at least
** n bytes.
**
** If the memory cell currently contains string or blob data
** and the third argument passed to this function is true, the
** current content of the cell is preserved. Otherwise, it may
** be discarded.
**
** This function sets the MEM_Dyn flag and clears any xDel callback.
** It also clears MEM_Ephem and MEM_Static. If the preserve flag is
** not set, Mem.n is zeroed.
*/
int sqlite3VdbeMemGrow(Mem *pMem, int n, int preserve){
assert( 1 >=
((pMem->zMalloc && pMem->zMalloc==pMem->z) ? 1 : 0) +
(((pMem->flags&MEM_Dyn)&&pMem->xDel) ? 1 : 0) +
((pMem->flags&MEM_Ephem) ? 1 : 0) +
((pMem->flags&MEM_Static) ? 1 : 0)
);
if( n<32 ) n = 32;
if( sqlite3DbMallocSize(pMem->db, pMem->zMalloc)<n ){
if( preserve && pMem->z==pMem->zMalloc ){
pMem->z = pMem->zMalloc = sqlite3DbReallocOrFree(pMem->db, pMem->z, n);
preserve = 0;
}else{
sqlite3DbFree(pMem->db, pMem->zMalloc);
pMem->zMalloc = sqlite3DbMallocRaw(pMem->db, n);
}
}
if( preserve && pMem->z && pMem->zMalloc && pMem->z!=pMem->zMalloc ){
memcpy(pMem->zMalloc, pMem->z, pMem->n);
}
if( pMem->flags&MEM_Dyn && pMem->xDel ){
pMem->xDel((void *)(pMem->z));
}
pMem->z = pMem->zMalloc;
if( pMem->z==0 ){
pMem->flags = MEM_Null;
}else{
pMem->flags &= ~(MEM_Ephem|MEM_Static);
}
pMem->xDel = 0;
return (pMem->z ? SQLITE_OK : SQLITE_NOMEM);
}
/*
** Insert a new value into a RowSet.
**
** The mallocFailed flag of the database connection is set if a
** memory allocation fails.
*/
void sqlite3RowSetInsert(RowSet *p, i64 rowid){
struct RowSetEntry *pEntry;
struct RowSetEntry *pLast;
if( p==0 ) return; /* Must have been a malloc failure */
if( p->nFresh==0 ){
struct RowSetChunk *pNew;
pNew = sqlite3DbMallocRaw(p->db, sizeof(*pNew));
if( pNew==0 ){
return;
}
pNew->pNext = p->pChunk;
p->pChunk = pNew;
p->pFresh = pNew->aEntry;
p->nFresh = ROWSET_ENTRY_PER_CHUNK;
}
pEntry = p->pFresh++;
p->nFresh--;
pEntry->v = rowid;
pEntry->pNext = 0;
pLast = p->pLast;
if( pLast ){
if( p->isSorted && rowid<=pLast->v ){
p->isSorted = 0;
}
pLast->pNext = pEntry;
}else{
assert( p->pEntry==0 );
p->pEntry = pEntry;
}
p->pLast = pEntry;
}
/*
** Initialize iterator pIter to scan through the PMA stored in file pFile
** starting at offset iStart and ending at offset iEof-1. This function
** leaves the iterator pointing to the first key in the PMA (or EOF if the
** PMA is empty).
*/
static int vdbeSorterIterInit(
sqlite3 *db, /* Database handle */
VdbeSorter *pSorter, /* Sorter object */
i64 iStart, /* Start offset in pFile */
VdbeSorterIter *pIter, /* Iterator to populate */
i64 *pnByte /* IN/OUT: Increment this value by PMA size */
){
int rc;
assert( pSorter->iWriteOff>iStart );
assert( pIter->aAlloc==0 );
pIter->pFile = pSorter->pTemp1;
pIter->iReadOff = iStart;
pIter->nAlloc = 128;
pIter->aAlloc = (u8 *)sqlite3DbMallocRaw(db, pIter->nAlloc);
if( !pIter->aAlloc ){
rc = SQLITE_NOMEM;
}else{
i64 nByte; /* Total size of PMA in bytes */
rc = vdbeSorterReadVarint(pSorter->pTemp1, &pIter->iReadOff, &nByte);
*pnByte += nByte;
pIter->iEof = pIter->iReadOff + nByte;
}
if( rc==SQLITE_OK ){
rc = vdbeSorterIterNext(db, pIter);
}
return rc;
}
/*
** Allocate and zero memory. If the allocation fails, make
** the mallocFailed flag in the connection pointer.
*/
void *sqlite3DbMallocZero(sqlite3 *db, u64 n){
void *p;
testcase( db==0 );
p = sqlite3DbMallocRaw(db, n);
if( p ) memset(p, 0, (size_t)n);
return p;
}
/*
** Allocate and zero memory. If the allocation fails, make
** the mallocFailed flag in the connection pointer.
*/
void *sqlite3DbMallocZero(sqlite3 *db, int n){
void *p = sqlite3DbMallocRaw(db, n);
if( p ){
memset(p, 0, n);
}
return p;
}
/*
** Insert a new value into a RowSet.
**
** The mallocFailed flag of the database connection is set if a
** memory allocation fails.
*/
void sqlite3RowSetInsert(RowSet *p, i64 rowid){
struct RowSetEntry *pEntry; /* The new entry */
struct RowSetEntry *pLast; /* The last prior entry */
assert( p!=0 );
if( p->nFresh==0 ){
struct RowSetChunk *pNew;
pNew = sqlite3DbMallocRaw(p->db, sizeof(*pNew));
if( pNew==0 ){
return;
}
pNew->pNextChunk = p->pChunk;
p->pChunk = pNew;
p->pFresh = pNew->aEntry;
p->nFresh = ROWSET_ENTRY_PER_CHUNK;
}
pEntry = p->pFresh++;
p->nFresh--;
pEntry->v = rowid;
pEntry->pRight = 0;
pLast = p->pLast;
if( pLast ){
if( p->isSorted && rowid<=pLast->v ){
p->isSorted = 0;
}
pLast->pRight = pEntry;
}else{
assert( p->pEntry==0 ); /* Fires if INSERT after SMALLEST */
p->pEntry = pEntry;
}
p->pLast = pEntry;
}
/*
** Allocate and zero memory. If the allocation fails, make
** the mallocFailed flag in the connection pointer.
*/
void *sqlite3DbMallocZero(sqlite3 *db, u64 n){
void *p = sqlite3DbMallocRaw(db, n);
if( p ){
memset(p, 0, (size_t)n);
}
return p;
}
char *sqlite3DbStrNDup(sqlite3 *db, const char *z, u64 n){
char *zNew;
if( z==0 ){
return 0;
}
assert( (n&0x7fffffff)==n );
zNew = sqlite3DbMallocRaw(db, n+1);
if( zNew ){
memcpy(zNew, z, (size_t)n);
zNew[n] = 0;
}
return zNew;
}
/*
** Make a copy of a string in memory obtained from sqliteMalloc(). These
** functions call sqlite3MallocRaw() directly instead of sqliteMalloc(). This
** is because when memory debugging is turned on, these two functions are
** called via macros that record the current file and line number in the
** ThreadData structure.
*/
char *sqlite3DbStrDup(sqlite3 *db, const char *z){
char *zNew;
size_t n;
if( z==0 ){
return 0;
}
n = strlen(z) + 1;
zNew = sqlite3DbMallocRaw(db, n);
if( zNew ){
memcpy(zNew, z, n);
}
return zNew;
}
/*
** Make a copy of a string in memory obtained from sqliteMalloc(). These
** functions call sqlite3MallocRaw() directly instead of sqliteMalloc(). This
** is because when memory debugging is turned on, these two functions are
** called via macros that record the current file and line number in the
** ThreadData structure.
*/
char *sqlite3DbStrDup(sqlite3 *db, const char *z){
char *zNew;
size_t n;
if( z==0 ){
return 0;
}
n = sqlite3Strlen30(z) + 1;
assert( (n&0x7fffffff)==n );
zNew = sqlite3DbMallocRaw(db, (int)n);
if( zNew ){
memcpy(zNew, z, n);
}
return zNew;
}
/*
** Add a record to the sorter.
*/
SQLITE_PRIVATE int sqlite3VdbeSorterWrite(
sqlite3 *db, /* Database handle */
const VdbeCursor *pCsr, /* Sorter cursor */
Mem *pVal /* Memory cell containing record */
){
VdbeSorter *pSorter = pCsr->pSorter;
int rc = SQLITE_OK; /* Return Code */
SorterRecord *pNew; /* New list element */
assert( pSorter );
pSorter->nInMemory += sqlite3VarintLen(pVal->n) + pVal->n;
pNew = (SorterRecord *)sqlite3DbMallocRaw(db, pVal->n + sizeof(SorterRecord));
if( pNew==0 ){
rc = SQLITE_NOMEM;
}else{
pNew->pVal = (void *)&pNew[1];
memcpy(pNew->pVal, pVal->z, pVal->n);
pNew->nVal = pVal->n;
pNew->pNext = pSorter->pRecord;
pSorter->pRecord = pNew;
}
/* See if the contents of the sorter should now be written out. They
** are written out when either of the following are true:
**
** * The total memory allocated for the in-memory list is greater
** than (page-size * cache-size), or
**
** * The total memory allocated for the in-memory list is greater
** than (page-size * 10) and sqlite3HeapNearlyFull() returns true.
*/
if( rc==SQLITE_OK && pSorter->mxPmaSize>0 && (
(pSorter->nInMemory>pSorter->mxPmaSize)
|| (pSorter->nInMemory>pSorter->mnPmaSize && sqlite3HeapNearlyFull())
)){
#ifdef SQLITE_DEBUG
i64 nExpect = pSorter->iWriteOff
+ sqlite3VarintLen(pSorter->nInMemory)
+ pSorter->nInMemory;
#endif
rc = vdbeSorterListToPMA(db, pCsr);
pSorter->nInMemory = 0;
assert( rc!=SQLITE_OK || (nExpect==pSorter->iWriteOff) );
}
return rc;
}
/*
** Delete any previous value and set the value of pMem to be an
** empty boolean index.
*/
void sqlite3VdbeMemSetRowSet(Mem *pMem){
sqlite3 *db = pMem->db;
assert( db!=0 );
assert( (pMem->flags & MEM_RowSet)==0 );
sqlite3VdbeMemRelease(pMem);
pMem->zMalloc = sqlite3DbMallocRaw(db, 64);
if( db->mallocFailed ){
pMem->flags = MEM_Null;
}else{
assert( pMem->zMalloc );
pMem->u.pRowSet = sqlite3RowSetInit(db, pMem->zMalloc,
sqlite3DbMallocSize(db, pMem->zMalloc));
assert( pMem->u.pRowSet!=0 );
pMem->flags = MEM_RowSet;
}
}
/*
** Allocate a new RowSetEntry object that is associated with the
** given RowSet. Return a pointer to the new and completely uninitialized
** objected.
**
** In an OOM situation, the RowSet.db->mallocFailed flag is set and this
** routine returns NULL.
*/
static struct RowSetEntry *rowSetEntryAlloc(RowSet *p){
assert( p!=0 );
if( p->nFresh==0 ){
struct RowSetChunk *pNew;
pNew = sqlite3DbMallocRaw(p->db, sizeof(*pNew));
if( pNew==0 ){
return 0;
}
pNew->pNextChunk = p->pChunk;
p->pChunk = pNew;
p->pFresh = pNew->aEntry;
p->nFresh = ROWSET_ENTRY_PER_CHUNK;
}
p->nFresh--;
return p->pFresh++;
}
/*
** Initialize a file-writer object.
*/
static void fileWriterInit(
sqlite3 *db, /* Database (for malloc) */
sqlite3_file *pFile, /* File to write to */
FileWriter *p, /* Object to populate */
i64 iStart /* Offset of pFile to begin writing at */
){
int nBuf = sqlite3BtreeGetPageSize(db->aDb[0].pBt);
memset(p, 0, sizeof(FileWriter));
p->aBuffer = (u8 *)sqlite3DbMallocRaw(db, nBuf);
if( !p->aBuffer ){
p->eFWErr = SQLITE_NOMEM;
}else{
p->iBufEnd = p->iBufStart = (iStart % nBuf);
p->iWriteOff = iStart - p->iBufStart;
p->nBuffer = nBuf;
p->pFile = pFile;
}
}
/*
** Make sure pMem->z points to a writable allocation of at least
** n bytes.
**
** If the third argument passed to this function is true, then memory
** cell pMem must contain a string or blob. In this case the content is
** preserved. Otherwise, if the third parameter to this function is false,
** any current string or blob value may be discarded.
**
** This function sets the MEM_Dyn flag and clears any xDel callback.
** It also clears MEM_Ephem and MEM_Static. If the preserve flag is
** not set, Mem.n is zeroed.
*/
int sqlite3VdbeMemGrow(Mem *pMem, int n, int preserve){
assert( 1 >=
((pMem->zMalloc && pMem->zMalloc==pMem->z) ? 1 : 0) +
(((pMem->flags&MEM_Dyn)&&pMem->xDel) ? 1 : 0) +
((pMem->flags&MEM_Ephem) ? 1 : 0) +
((pMem->flags&MEM_Static) ? 1 : 0)
);
assert( (pMem->flags&MEM_RowSet)==0 );
/* If the preserve flag is set to true, then the memory cell must already
** contain a valid string or blob value. */
assert( preserve==0 || pMem->flags&(MEM_Blob|MEM_Str) );
if( n<32 ) n = 32;
if( sqlite3DbMallocSize(pMem->db, pMem->zMalloc)<n ){
if( preserve && pMem->z==pMem->zMalloc ){
pMem->z = pMem->zMalloc = sqlite3DbReallocOrFree(pMem->db, pMem->z, n);
preserve = 0;
}else{
sqlite3DbFree(pMem->db, pMem->zMalloc);
pMem->zMalloc = sqlite3DbMallocRaw(pMem->db, n);
}
}
if( pMem->z && preserve && pMem->zMalloc && pMem->z!=pMem->zMalloc ){
memcpy(pMem->zMalloc, pMem->z, pMem->n);
}
if( pMem->flags&MEM_Dyn && pMem->xDel ){
assert( pMem->xDel!=SQLITE_DYNAMIC );
pMem->xDel((void *)(pMem->z));
}
pMem->z = pMem->zMalloc;
if( pMem->z==0 ){
pMem->flags = MEM_Null;
}else{
pMem->flags &= ~(MEM_Ephem|MEM_Static);
}
pMem->xDel = 0;
return (pMem->z ? SQLITE_OK : SQLITE_NOMEM);
}
/*
** The actual function that does the work of creating a new module.
** This function implements the sqlite3_create_module() and
** sqlite3_create_module_v2() interfaces.
*/
static int createModule(
sqlite3 *db, /* Database in which module is registered */
const char *zName, /* Name assigned to this module */
const sqlite3_module *pModule, /* The definition of the module */
void *pAux, /* Context pointer for xCreate/xConnect */
void (*xDestroy)(void *) /* Module destructor function */
){
int rc = SQLITE_OK;
int nName;
sqlite3_mutex_enter(db->mutex);
nName = sqlite3Strlen30(zName);
if( sqlite3HashFind(&db->aModule, zName) ){
rc = SQLITE_MISUSE_BKPT;
}else{
Module *pMod;
pMod = (Module *)sqlite3DbMallocRaw(db, sizeof(Module) + nName + 1);
if( pMod ){
Module *pDel;
char *zCopy = (char *)(&pMod[1]);
memcpy(zCopy, zName, nName+1);
pMod->zName = zCopy;
pMod->pModule = pModule;
pMod->pAux = pAux;
pMod->xDestroy = xDestroy;
pMod->pEpoTab = 0;
pDel = (Module *)sqlite3HashInsert(&db->aModule,zCopy,(void*)pMod);
assert( pDel==0 || pDel==pMod );
if( pDel ){
db->mallocFailed = 1;
sqlite3DbFree(db, pDel);
}
}
}
rc = sqlite3ApiExit(db, rc);
if( rc!=SQLITE_OK && xDestroy ) xDestroy(pAux);
sqlite3_mutex_leave(db->mutex);
return rc;
}
int sqlite3VdbeMemExpandBlob(Mem *pMem){
if( pMem->flags & MEM_Zero ){
char *pNew;
int nByte;
assert( (pMem->flags & MEM_Blob)!=0 );
nByte = pMem->n + pMem->u.i;
if( nByte<=0 ) nByte = 1;
assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
pNew = sqlite3DbMallocRaw(pMem->db, nByte);
if( pNew==0 ){
return SQLITE_NOMEM;
}
memcpy(pNew, pMem->z, pMem->n);
memset(&pNew[pMem->n], 0, pMem->u.i);
sqlite3VdbeMemRelease(pMem);
pMem->z = pNew;
pMem->n += pMem->u.i;
pMem->u.i = 0;
pMem->flags &= ~(MEM_Zero|MEM_Static|MEM_Ephem|MEM_Short|MEM_Term);
pMem->flags |= MEM_Dyn;
}
return SQLITE_OK;
}
/*
** Make the given Mem object MEM_Dyn.
**
** Return SQLITE_OK on success or SQLITE_NOMEM if malloc fails.
*/
int sqlite3VdbeMemDynamicify(Mem *pMem){
int n;
u8 *z;
assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
expandBlob(pMem);
if( (pMem->flags & (MEM_Ephem|MEM_Static|MEM_Short))==0 ){
return SQLITE_OK;
}
assert( (pMem->flags & MEM_Dyn)==0 );
n = pMem->n;
assert( pMem->flags & (MEM_Str|MEM_Blob) );
z = sqlite3DbMallocRaw(pMem->db, n+2 );
if( z==0 ){
return SQLITE_NOMEM;
}
pMem->flags |= MEM_Dyn|MEM_Term;
pMem->xDel = 0;
memcpy(z, pMem->z, n );
z[n] = 0;
z[n+1] = 0;
pMem->z = (char*)z;
pMem->flags &= ~(MEM_Ephem|MEM_Static|MEM_Short);
return SQLITE_OK;
}
/*
** Create a new Upsert object.
*/
Upsert *sqlite3UpsertNew(
sqlite3 *db, /* Determines which memory allocator to use */
ExprList *pTarget, /* Target argument to ON CONFLICT, or NULL */
Expr *pTargetWhere, /* Optional WHERE clause on the target */
ExprList *pSet, /* UPDATE columns, or NULL for a DO NOTHING */
Expr *pWhere /* WHERE clause for the ON CONFLICT UPDATE */
){
Upsert *pNew;
pNew = sqlite3DbMallocRaw(db, sizeof(Upsert));
if( pNew==0 ){
sqlite3ExprListDelete(db, pTarget);
sqlite3ExprDelete(db, pTargetWhere);
sqlite3ExprListDelete(db, pSet);
sqlite3ExprDelete(db, pWhere);
return 0;
}else{
pNew->pUpsertTarget = pTarget;
pNew->pUpsertTargetWhere = pTargetWhere;
pNew->pUpsertSet = pSet;
pNew->pUpsertWhere = pWhere;
pNew->pUpsertIdx = 0;
}
return pNew;
}
/*
** Process an UPDATE statement.
**
** UPDATE OR IGNORE table_wxyz SET a=b, c=d WHERE e<5 AND f NOT NULL;
** \_______/ \________/ \______/ \________________/
* onError pTabList pChanges pWhere
*/
void sqlite3Update(
Parse *pParse, /* The parser context */
SrcList *pTabList, /* The table in which we should change things */
ExprList *pChanges, /* Things to be changed */
Expr *pWhere, /* The WHERE clause. May be null */
int onError /* How to handle constraint errors */
){
int i, j; /* Loop counters */
Table *pTab; /* The table to be updated */
int addrTop = 0; /* VDBE instruction address of the start of the loop */
WhereInfo *pWInfo; /* Information about the WHERE clause */
Vdbe *v; /* The virtual database engine */
Index *pIdx; /* For looping over indices */
Index *pPk; /* The PRIMARY KEY index for WITHOUT ROWID tables */
int nIdx; /* Number of indices that need updating */
int iBaseCur; /* Base cursor number */
int iDataCur; /* Cursor for the canonical data btree */
int iIdxCur; /* Cursor for the first index */
sqlite3 *db; /* The database structure */
int *aRegIdx = 0; /* One register assigned to each index to be updated */
int *aXRef = 0; /* aXRef[i] is the index in pChanges->a[] of the
** an expression for the i-th column of the table.
** aXRef[i]==-1 if the i-th column is not changed. */
u8 *aToOpen; /* 1 for tables and indices to be opened */
u8 chngPk; /* PRIMARY KEY changed in a WITHOUT ROWID table */
u8 chngRowid; /* Rowid changed in a normal table */
u8 chngKey; /* Either chngPk or chngRowid */
Expr *pRowidExpr = 0; /* Expression defining the new record number */
AuthContext sContext; /* The authorization context */
NameContext sNC; /* The name-context to resolve expressions in */
int iDb; /* Database containing the table being updated */
int okOnePass; /* True for one-pass algorithm without the FIFO */
int hasFK; /* True if foreign key processing is required */
int labelBreak; /* Jump here to break out of UPDATE loop */
int labelContinue; /* Jump here to continue next step of UPDATE loop */
#ifndef SQLITE_OMIT_TRIGGER
int isView; /* True when updating a view (INSTEAD OF trigger) */
Trigger *pTrigger; /* List of triggers on pTab, if required */
int tmask; /* Mask of TRIGGER_BEFORE|TRIGGER_AFTER */
#endif
int newmask; /* Mask of NEW.* columns accessed by BEFORE triggers */
int iEph = 0; /* Ephemeral table holding all primary key values */
int nKey = 0; /* Number of elements in regKey for WITHOUT ROWID */
int aiCurOnePass[2]; /* The write cursors opened by WHERE_ONEPASS */
/* Register Allocations */
int regRowCount = 0; /* A count of rows changed */
int regOldRowid = 0; /* The old rowid */
int regNewRowid = 0; /* The new rowid */
int regNew = 0; /* Content of the NEW.* table in triggers */
int regOld = 0; /* Content of OLD.* table in triggers */
int regRowSet = 0; /* Rowset of rows to be updated */
int regKey = 0; /* composite PRIMARY KEY value */
memset(&sContext, 0, sizeof(sContext));
db = pParse->db;
if( pParse->nErr || db->mallocFailed ){
goto update_cleanup;
}
assert( pTabList->nSrc==1 );
/* Locate the table which we want to update.
*/
pTab = sqlite3SrcListLookup(pParse, pTabList);
if( pTab==0 ) goto update_cleanup;
iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema);
/* Figure out if we have any triggers and if the table being
** updated is a view.
*/
#ifndef SQLITE_OMIT_TRIGGER
pTrigger = sqlite3TriggersExist(pParse, pTab, TK_UPDATE, pChanges, &tmask);
isView = pTab->pSelect!=0;
assert( pTrigger || tmask==0 );
#else
# define pTrigger 0
# define isView 0
# define tmask 0
#endif
#ifdef SQLITE_OMIT_VIEW
# undef isView
# define isView 0
#endif
if( sqlite3ViewGetColumnNames(pParse, pTab) ){
goto update_cleanup;
}
if( sqlite3IsReadOnly(pParse, pTab, tmask) ){
goto update_cleanup;
}
/* Allocate a cursors for the main database table and for all indices.
** The index cursors might not be used, but if they are used they
** need to occur right after the database cursor. So go ahead and
** allocate enough space, just in case.
*/
pTabList->a[0].iCursor = iBaseCur = iDataCur = pParse->nTab++;
iIdxCur = iDataCur+1;
pPk = HasRowid(pTab) ? 0 : sqlite3PrimaryKeyIndex(pTab);
for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){
if( IsPrimaryKeyIndex(pIdx) && pPk!=0 ){
iDataCur = pParse->nTab;
pTabList->a[0].iCursor = iDataCur;
}
pParse->nTab++;
}
/* Allocate space for aXRef[], aRegIdx[], and aToOpen[].
** Initialize aXRef[] and aToOpen[] to their default values.
*/
aXRef = sqlite3DbMallocRaw(db, sizeof(int) * (pTab->nCol+nIdx) + nIdx+2 );
if( aXRef==0 ) goto update_cleanup;
aRegIdx = aXRef+pTab->nCol;
aToOpen = (u8*)(aRegIdx+nIdx);
memset(aToOpen, 1, nIdx+1);
aToOpen[nIdx+1] = 0;
for(i=0; i<pTab->nCol; i++) aXRef[i] = -1;
/* Initialize the name-context */
memset(&sNC, 0, sizeof(sNC));
sNC.pParse = pParse;
sNC.pSrcList = pTabList;
/* Resolve the column names in all the expressions of the
** of the UPDATE statement. Also find the column index
** for each column to be updated in the pChanges array. For each
** column to be updated, make sure we have authorization to change
** that column.
*/
chngRowid = chngPk = 0;
for(i=0; i<pChanges->nExpr; i++){
if( sqlite3ResolveExprNames(&sNC, pChanges->a[i].pExpr) ){
goto update_cleanup;
}
for(j=0; j<pTab->nCol; j++){
if( sqlite3StrICmp(pTab->aCol[j].zName, pChanges->a[i].zName)==0 ){
if( j==pTab->iPKey ){
chngRowid = 1;
pRowidExpr = pChanges->a[i].pExpr;
}else if( pPk && (pTab->aCol[j].colFlags & COLFLAG_PRIMKEY)!=0 ){
chngPk = 1;
}
aXRef[j] = i;
break;
}
}
if( j>=pTab->nCol ){
if( pPk==0 && sqlite3IsRowid(pChanges->a[i].zName) ){
j = -1;
chngRowid = 1;
pRowidExpr = pChanges->a[i].pExpr;
}else{
sqlite3ErrorMsg(pParse, "no such column: %s", pChanges->a[i].zName);
pParse->checkSchema = 1;
goto update_cleanup;
}
}
#ifndef SQLITE_OMIT_AUTHORIZATION
{
int rc;
rc = sqlite3AuthCheck(pParse, SQLITE_UPDATE, pTab->zName,
j<0 ? "ROWID" : pTab->aCol[j].zName,
db->aDb[iDb].zName);
if( rc==SQLITE_DENY ){
goto update_cleanup;
}else if( rc==SQLITE_IGNORE ){
aXRef[j] = -1;
}
}
#endif
}
assert( (chngRowid & chngPk)==0 );
assert( chngRowid==0 || chngRowid==1 );
assert( chngPk==0 || chngPk==1 );
chngKey = chngRowid + chngPk;
/* The SET expressions are not actually used inside the WHERE loop.
** So reset the colUsed mask
*/
pTabList->a[0].colUsed = 0;
hasFK = sqlite3FkRequired(pParse, pTab, aXRef, chngKey);
/* There is one entry in the aRegIdx[] array for each index on the table
** being updated. Fill in aRegIdx[] with a register number that will hold
** the key for accessing each index.
**
** FIXME: Be smarter about omitting indexes that use expressions.
*/
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
int reg;
if( chngKey || hasFK || pIdx->pPartIdxWhere || pIdx==pPk ){
reg = ++pParse->nMem;
}else{
reg = 0;
for(i=0; i<pIdx->nKeyCol; i++){
i16 iIdxCol = pIdx->aiColumn[i];
if( iIdxCol<0 || aXRef[iIdxCol]>=0 ){
reg = ++pParse->nMem;
break;
}
}
}
if( reg==0 ) aToOpen[j+1] = 0;
aRegIdx[j] = reg;
}
/* Begin generating code. */
v = sqlite3GetVdbe(pParse);
if( v==0 ) goto update_cleanup;
if( pParse->nested==0 ) sqlite3VdbeCountChanges(v);
sqlite3BeginWriteOperation(pParse, 1, iDb);
/* Allocate required registers. */
if( !IsVirtual(pTab) ){
regRowSet = ++pParse->nMem;
regOldRowid = regNewRowid = ++pParse->nMem;
if( chngPk || pTrigger || hasFK ){
regOld = pParse->nMem + 1;
pParse->nMem += pTab->nCol;
}
if( chngKey || pTrigger || hasFK ){
regNewRowid = ++pParse->nMem;
}
regNew = pParse->nMem + 1;
pParse->nMem += pTab->nCol;
}
/* Start the view context. */
if( isView ){
sqlite3AuthContextPush(pParse, &sContext, pTab->zName);
}
/* If we are trying to update a view, realize that view into
** an ephemeral table.
*/
#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER)
if( isView ){
sqlite3MaterializeView(pParse, pTab, pWhere, iDataCur);
}
#endif
/* Resolve the column names in all the expressions in the
** WHERE clause.
*/
if( sqlite3ResolveExprNames(&sNC, pWhere) ){
goto update_cleanup;
}
#ifndef SQLITE_OMIT_VIRTUALTABLE
/* Virtual tables must be handled separately */
if( IsVirtual(pTab) ){
updateVirtualTable(pParse, pTabList, pTab, pChanges, pRowidExpr, aXRef,
pWhere, onError);
goto update_cleanup;
}
#endif
/* Begin the database scan
*/
if( HasRowid(pTab) ){
sqlite3VdbeAddOp3(v, OP_Null, 0, regRowSet, regOldRowid);
pWInfo = sqlite3WhereBegin(
pParse, pTabList, pWhere, 0, 0, WHERE_ONEPASS_DESIRED, iIdxCur
);
if( pWInfo==0 ) goto update_cleanup;
okOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass);
/* Remember the rowid of every item to be updated.
*/
sqlite3VdbeAddOp2(v, OP_Rowid, iDataCur, regOldRowid);
if( !okOnePass ){
sqlite3VdbeAddOp2(v, OP_RowSetAdd, regRowSet, regOldRowid);
}
/* End the database scan loop.
*/
sqlite3WhereEnd(pWInfo);
}else{
int iPk; /* First of nPk memory cells holding PRIMARY KEY value */
i16 nPk; /* Number of components of the PRIMARY KEY */
int addrOpen; /* Address of the OpenEphemeral instruction */
assert( pPk!=0 );
nPk = pPk->nKeyCol;
iPk = pParse->nMem+1;
pParse->nMem += nPk;
regKey = ++pParse->nMem;
iEph = pParse->nTab++;
sqlite3VdbeAddOp2(v, OP_Null, 0, iPk);
addrOpen = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iEph, nPk);
sqlite3VdbeSetP4KeyInfo(pParse, pPk);
pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, 0, 0,
WHERE_ONEPASS_DESIRED, iIdxCur);
if( pWInfo==0 ) goto update_cleanup;
okOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass);
for(i=0; i<nPk; i++){
assert( pPk->aiColumn[i]>=0 );
sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, pPk->aiColumn[i],
iPk+i);
}
if( okOnePass ){
sqlite3VdbeChangeToNoop(v, addrOpen);
nKey = nPk;
regKey = iPk;
}else{
sqlite3VdbeAddOp4(v, OP_MakeRecord, iPk, nPk, regKey,
sqlite3IndexAffinityStr(db, pPk), nPk);
sqlite3VdbeAddOp2(v, OP_IdxInsert, iEph, regKey);
}
sqlite3WhereEnd(pWInfo);
}
/* Initialize the count of updated rows
*/
if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab ){
regRowCount = ++pParse->nMem;
sqlite3VdbeAddOp2(v, OP_Integer, 0, regRowCount);
}
labelBreak = sqlite3VdbeMakeLabel(v);
if( !isView ){
/*
** Open every index that needs updating. Note that if any
** index could potentially invoke a REPLACE conflict resolution
** action, then we need to open all indices because we might need
** to be deleting some records.
*/
if( onError==OE_Replace ){
memset(aToOpen, 1, nIdx+1);
}else{
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
if( pIdx->onError==OE_Replace ){
memset(aToOpen, 1, nIdx+1);
break;
}
}
}
if( okOnePass ){
if( aiCurOnePass[0]>=0 ) aToOpen[aiCurOnePass[0]-iBaseCur] = 0;
if( aiCurOnePass[1]>=0 ) aToOpen[aiCurOnePass[1]-iBaseCur] = 0;
}
sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, 0, iBaseCur, aToOpen,
0, 0);
}
/* Top of the update loop */
if( okOnePass ){
if( aToOpen[iDataCur-iBaseCur] && !isView ){
assert( pPk );
sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelBreak, regKey, nKey);
VdbeCoverageNeverTaken(v);
}
labelContinue = labelBreak;
sqlite3VdbeAddOp2(v, OP_IsNull, pPk ? regKey : regOldRowid, labelBreak);
VdbeCoverageIf(v, pPk==0);
VdbeCoverageIf(v, pPk!=0);
}else if( pPk ){
labelContinue = sqlite3VdbeMakeLabel(v);
sqlite3VdbeAddOp2(v, OP_Rewind, iEph, labelBreak); VdbeCoverage(v);
addrTop = sqlite3VdbeAddOp2(v, OP_RowKey, iEph, regKey);
sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelContinue, regKey, 0);
VdbeCoverage(v);
}else{
labelContinue = sqlite3VdbeAddOp3(v, OP_RowSetRead, regRowSet, labelBreak,
regOldRowid);
VdbeCoverage(v);
sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, labelContinue, regOldRowid);
VdbeCoverage(v);
}
/* If the record number will change, set register regNewRowid to
** contain the new value. If the record number is not being modified,
** then regNewRowid is the same register as regOldRowid, which is
** already populated. */
assert( chngKey || pTrigger || hasFK || regOldRowid==regNewRowid );
if( chngRowid ){
sqlite3ExprCode(pParse, pRowidExpr, regNewRowid);
sqlite3VdbeAddOp1(v, OP_MustBeInt, regNewRowid); VdbeCoverage(v);
}
/* Compute the old pre-UPDATE content of the row being changed, if that
** information is needed */
if( chngPk || hasFK || pTrigger ){
u32 oldmask = (hasFK ? sqlite3FkOldmask(pParse, pTab) : 0);
oldmask |= sqlite3TriggerColmask(pParse,
pTrigger, pChanges, 0, TRIGGER_BEFORE|TRIGGER_AFTER, pTab, onError
);
for(i=0; i<pTab->nCol; i++){
if( oldmask==0xffffffff
|| (i<32 && (oldmask & MASKBIT32(i))!=0)
|| (pTab->aCol[i].colFlags & COLFLAG_PRIMKEY)!=0
){
testcase( oldmask!=0xffffffff && i==31 );
sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regOld+i);
}else{
sqlite3VdbeAddOp2(v, OP_Null, 0, regOld+i);
}
}
if( chngRowid==0 && pPk==0 ){
sqlite3VdbeAddOp2(v, OP_Copy, regOldRowid, regNewRowid);
}
}
/* Populate the array of registers beginning at regNew with the new
** row data. This array is used to check constants, create the new
** table and index records, and as the values for any new.* references
** made by triggers.
**
** If there are one or more BEFORE triggers, then do not populate the
** registers associated with columns that are (a) not modified by
** this UPDATE statement and (b) not accessed by new.* references. The
** values for registers not modified by the UPDATE must be reloaded from
** the database after the BEFORE triggers are fired anyway (as the trigger
** may have modified them). So not loading those that are not going to
** be used eliminates some redundant opcodes.
*/
newmask = sqlite3TriggerColmask(
pParse, pTrigger, pChanges, 1, TRIGGER_BEFORE, pTab, onError
);
for(i=0; i<pTab->nCol; i++){
if( i==pTab->iPKey ){
sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i);
}else{
j = aXRef[i];
if( j>=0 ){
sqlite3ExprCode(pParse, pChanges->a[j].pExpr, regNew+i);
}else if( 0==(tmask&TRIGGER_BEFORE) || i>31 || (newmask & MASKBIT32(i)) ){
/* This branch loads the value of a column that will not be changed
** into a register. This is done if there are no BEFORE triggers, or
** if there are one or more BEFORE triggers that use this value via
** a new.* reference in a trigger program.
*/
testcase( i==31 );
testcase( i==32 );
sqlite3ExprCodeGetColumnToReg(pParse, pTab, i, iDataCur, regNew+i);
}else{
sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i);
}
}
}
/* Fire any BEFORE UPDATE triggers. This happens before constraints are
** verified. One could argue that this is wrong.
*/
if( tmask&TRIGGER_BEFORE ){
sqlite3TableAffinity(v, pTab, regNew);
sqlite3CodeRowTrigger(pParse, pTrigger, TK_UPDATE, pChanges,
TRIGGER_BEFORE, pTab, regOldRowid, onError, labelContinue);
/* The row-trigger may have deleted the row being updated. In this
** case, jump to the next row. No updates or AFTER triggers are
** required. This behavior - what happens when the row being updated
** is deleted or renamed by a BEFORE trigger - is left undefined in the
** documentation.
*/
if( pPk ){
sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelContinue,regKey,nKey);
VdbeCoverage(v);
}else{
sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, labelContinue, regOldRowid);
VdbeCoverage(v);
}
/* If it did not delete it, the row-trigger may still have modified
** some of the columns of the row being updated. Load the values for
** all columns not modified by the update statement into their
** registers in case this has happened.
*/
for(i=0; i<pTab->nCol; i++){
if( aXRef[i]<0 && i!=pTab->iPKey ){
sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regNew+i);
}
}
}
if( !isView ){
int addr1 = 0; /* Address of jump instruction */
int bReplace = 0; /* True if REPLACE conflict resolution might happen */
/* Do constraint checks. */
assert( regOldRowid>0 );
sqlite3GenerateConstraintChecks(pParse, pTab, aRegIdx, iDataCur, iIdxCur,
regNewRowid, regOldRowid, chngKey, onError, labelContinue, &bReplace);
/* Do FK constraint checks. */
if( hasFK ){
sqlite3FkCheck(pParse, pTab, regOldRowid, 0, aXRef, chngKey);
}
/* Delete the index entries associated with the current record. */
if( bReplace || chngKey ){
if( pPk ){
addr1 = sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, 0, regKey, nKey);
}else{
addr1 = sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, 0, regOldRowid);
}
VdbeCoverageNeverTaken(v);
}
sqlite3GenerateRowIndexDelete(pParse, pTab, iDataCur, iIdxCur, aRegIdx, -1);
/* If changing the record number, delete the old record. */
if( hasFK || chngKey || pPk!=0 ){
sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, 0);
}
if( bReplace || chngKey ){
sqlite3VdbeJumpHere(v, addr1);
}
if( hasFK ){
sqlite3FkCheck(pParse, pTab, 0, regNewRowid, aXRef, chngKey);
}
/* Insert the new index entries and the new record. */
sqlite3CompleteInsertion(pParse, pTab, iDataCur, iIdxCur,
regNewRowid, aRegIdx, 1, 0, 0);
/* Do any ON CASCADE, SET NULL or SET DEFAULT operations required to
** handle rows (possibly in other tables) that refer via a foreign key
** to the row just updated. */
if( hasFK ){
sqlite3FkActions(pParse, pTab, pChanges, regOldRowid, aXRef, chngKey);
}
}
/* Increment the row counter
*/
if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab){
sqlite3VdbeAddOp2(v, OP_AddImm, regRowCount, 1);
}
sqlite3CodeRowTrigger(pParse, pTrigger, TK_UPDATE, pChanges,
TRIGGER_AFTER, pTab, regOldRowid, onError, labelContinue);
/* Repeat the above with the next record to be updated, until
** all record selected by the WHERE clause have been updated.
*/
if( okOnePass ){
/* Nothing to do at end-of-loop for a single-pass */
}else if( pPk ){
sqlite3VdbeResolveLabel(v, labelContinue);
sqlite3VdbeAddOp2(v, OP_Next, iEph, addrTop); VdbeCoverage(v);
}else{
sqlite3VdbeGoto(v, labelContinue);
}
sqlite3VdbeResolveLabel(v, labelBreak);
/* Close all tables */
for(i=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
assert( aRegIdx );
if( aToOpen[i+1] ){
sqlite3VdbeAddOp2(v, OP_Close, iIdxCur+i, 0);
}
}
if( iDataCur<iIdxCur ) sqlite3VdbeAddOp2(v, OP_Close, iDataCur, 0);
/* Update the sqlite_sequence table by storing the content of the
** maximum rowid counter values recorded while inserting into
** autoincrement tables.
*/
if( pParse->nested==0 && pParse->pTriggerTab==0 ){
sqlite3AutoincrementEnd(pParse);
}
/*
** Return the number of rows that were changed. If this routine is
** generating code because of a call to sqlite3NestedParse(), do not
** invoke the callback function.
*/
if( (db->flags&SQLITE_CountRows) && !pParse->pTriggerTab && !pParse->nested ){
sqlite3VdbeAddOp2(v, OP_ResultRow, regRowCount, 1);
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows updated", SQLITE_STATIC);
}
update_cleanup:
sqlite3AuthContextPop(&sContext);
sqlite3DbFree(db, aXRef); /* Also frees aRegIdx[] and aToOpen[] */
sqlite3SrcListDelete(db, pTabList);
sqlite3ExprListDelete(db, pChanges);
sqlite3ExprDelete(db, pWhere);
return;
}
/*
** This routine transforms the internal text encoding used by pMem to
** desiredEnc. It is an error if the string is already of the desired
** encoding, or if *pMem does not contain a string value.
*/
int sqlite3VdbeMemTranslate(Mem *pMem, u8 desiredEnc){
int len; /* Maximum length of output string in bytes */
unsigned char *zOut; /* Output buffer */
unsigned char *zIn; /* Input iterator */
unsigned char *zTerm; /* End of input */
unsigned char *z; /* Output iterator */
unsigned int c;
assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
assert( pMem->flags&MEM_Str );
assert( pMem->enc!=desiredEnc );
assert( pMem->enc!=0 );
assert( pMem->n>=0 );
#if defined(TRANSLATE_TRACE) && defined(SQLITE_DEBUG)
{
char zBuf[100];
sqlite3VdbeMemPrettyPrint(pMem, zBuf);
fprintf(stderr, "INPUT: %s\n", zBuf);
}
#endif
/* If the translation is between UTF-16 little and big endian, then
** all that is required is to swap the byte order. This case is handled
** differently from the others.
*/
if( pMem->enc!=SQLITE_UTF8 && desiredEnc!=SQLITE_UTF8 ){
u8 temp;
int rc;
rc = sqlite3VdbeMemMakeWriteable(pMem);
if( rc!=SQLITE_OK ){
assert( rc==SQLITE_NOMEM );
return SQLITE_NOMEM;
}
zIn = (u8*)pMem->z;
zTerm = &zIn[pMem->n];
while( zIn<zTerm ){
temp = *zIn;
*zIn = *(zIn+1);
zIn++;
*zIn++ = temp;
}
pMem->enc = desiredEnc;
goto translate_out;
}
/* Set len to the maximum number of bytes required in the output buffer. */
if( desiredEnc==SQLITE_UTF8 ){
/* When converting from UTF-16, the maximum growth results from
** translating a 2-byte character to a 4-byte UTF-8 character.
** A single byte is required for the output string
** nul-terminator.
*/
len = pMem->n * 2 + 1;
}else{
/* When converting from UTF-8 to UTF-16 the maximum growth is caused
** when a 1-byte UTF-8 character is translated into a 2-byte UTF-16
** character. Two bytes are required in the output buffer for the
** nul-terminator.
*/
len = pMem->n * 2 + 2;
}
/* Set zIn to point at the start of the input buffer and zTerm to point 1
** byte past the end.
**
** Variable zOut is set to point at the output buffer, space obtained
** from sqlite3_malloc().
*/
zIn = (u8*)pMem->z;
zTerm = &zIn[pMem->n];
zOut = sqlite3DbMallocRaw(pMem->db, len);
if( !zOut ){
return SQLITE_NOMEM;
}
z = zOut;
if( pMem->enc==SQLITE_UTF8 ){
if( desiredEnc==SQLITE_UTF16LE ){
/* UTF-8 -> UTF-16 Little-endian */
while( zIn<zTerm ){
/* c = sqlite3Utf8Read(zIn, zTerm, (const u8**)&zIn); */
READ_UTF8(zIn, zTerm, c);
WRITE_UTF16LE(z, c);
}
}else{
assert( desiredEnc==SQLITE_UTF16BE );
/* UTF-8 -> UTF-16 Big-endian */
while( zIn<zTerm ){
/* c = sqlite3Utf8Read(zIn, zTerm, (const u8**)&zIn); */
READ_UTF8(zIn, zTerm, c);
WRITE_UTF16BE(z, c);
}
}
pMem->n = z - zOut;
*z++ = 0;
}else{
assert( desiredEnc==SQLITE_UTF8 );
if( pMem->enc==SQLITE_UTF16LE ){
/* UTF-16 Little-endian -> UTF-8 */
while( zIn<zTerm ){
READ_UTF16LE(zIn, c);
WRITE_UTF8(z, c);
}
}else{
/* UTF-16 Big-endian -> UTF-8 */
while( zIn<zTerm ){
READ_UTF16BE(zIn, c);
WRITE_UTF8(z, c);
}
}
pMem->n = z - zOut;
}
*z = 0;
assert( (pMem->n+(desiredEnc==SQLITE_UTF8?1:2))<=len );
sqlite3VdbeMemRelease(pMem);
pMem->flags &= ~(MEM_Static|MEM_Dyn|MEM_Ephem);
pMem->enc = desiredEnc;
pMem->flags |= (MEM_Term|MEM_Dyn);
pMem->z = (char*)zOut;
pMem->zMalloc = pMem->z;
translate_out:
#if defined(TRANSLATE_TRACE) && defined(SQLITE_DEBUG)
{
char zBuf[100];
sqlite3VdbeMemPrettyPrint(pMem, zBuf);
fprintf(stderr, "OUTPUT: %s\n", zBuf);
}
#endif
return SQLITE_OK;
}
/*
** An SQL user-function registered to do the work of an ATTACH statement. The
** three arguments to the function come directly from an attach statement:
**
** ATTACH DATABASE x AS y KEY z
**
** SELECT sqlite_attach(x, y, z)
**
** If the optional "KEY z" syntax is omitted, an SQL NULL is passed as the
** third argument.
*/
static void attachFunc(
sqlite3_context *context,
int NotUsed,
sqlite3_value **argv
){
int i;
int rc = 0;
sqlite3 *db = sqlite3_context_db_handle(context);
const char *zName;
const char *zFile;
Db *aNew;
char *zErrDyn = 0;
UNUSED_PARAMETER(NotUsed);
zFile = (const char *)sqlite3_value_text(argv[0]);
zName = (const char *)sqlite3_value_text(argv[1]);
if( zFile==0 ) zFile = "";
if( zName==0 ) zName = "";
/* Check for the following errors:
**
** * Too many attached databases,
** * Transaction currently open
** * Specified database name already being used.
*/
if( db->nDb>=db->aLimit[SQLITE_LIMIT_ATTACHED]+2 ){
zErrDyn = sqlite3MPrintf(db, "too many attached databases - max %d",
db->aLimit[SQLITE_LIMIT_ATTACHED]
);
goto attach_error;
}
if( !db->autoCommit ){
zErrDyn = sqlite3MPrintf(db, "cannot ATTACH database within transaction");
goto attach_error;
}
for(i=0; i<db->nDb; i++){
char *z = db->aDb[i].zName;
assert( z && zName );
if( sqlite3StrICmp(z, zName)==0 ){
zErrDyn = sqlite3MPrintf(db, "database %s is already in use", zName);
goto attach_error;
}
}
/* Allocate the new entry in the db->aDb[] array and initialise the schema
** hash tables.
*/
if( db->aDb==db->aDbStatic ){
aNew = sqlite3DbMallocRaw(db, sizeof(db->aDb[0])*3 );
if( aNew==0 ) return;
memcpy(aNew, db->aDb, sizeof(db->aDb[0])*2);
}else{
aNew = sqlite3DbRealloc(db, db->aDb, sizeof(db->aDb[0])*(db->nDb+1) );
if( aNew==0 ) return;
}
db->aDb = aNew;
aNew = &db->aDb[db->nDb];
memset(aNew, 0, sizeof(*aNew));
/* Open the database file. If the btree is successfully opened, use
** it to obtain the database schema. At this point the schema may
** or may not be initialised.
*/
rc = sqlite3BtreeFactory(db, zFile, 0, SQLITE_DEFAULT_CACHE_SIZE,
db->openFlags | SQLITE_OPEN_MAIN_DB,
&aNew->pBt);
db->nDb++;
if( rc==SQLITE_CONSTRAINT ){
rc = SQLITE_ERROR;
zErrDyn = sqlite3MPrintf(db, "database is already attached");
}else if( rc==SQLITE_OK ){
Pager *pPager;
aNew->pSchema = sqlite3SchemaGet(db, aNew->pBt);
if( !aNew->pSchema ){
rc = SQLITE_NOMEM;
}else if( aNew->pSchema->file_format && aNew->pSchema->enc!=ENC(db) ){
zErrDyn = sqlite3MPrintf(db,
"attached databases must use the same text encoding as main database");
rc = SQLITE_ERROR;
}
pPager = sqlite3BtreePager(aNew->pBt);
sqlite3PagerLockingMode(pPager, db->dfltLockMode);
sqlite3PagerJournalMode(pPager, db->dfltJournalMode);
}
aNew->zName = sqlite3DbStrDup(db, zName);
aNew->safety_level = 3;
#if SQLITE_HAS_CODEC
{
extern int sqlite3CodecAttach(sqlite3*, int, const void*, int);
extern void sqlite3CodecGetKey(sqlite3*, int, void**, int*);
int nKey;
char *zKey;
int t = sqlite3_value_type(argv[2]);
switch( t ){
case SQLITE_INTEGER:
case SQLITE_FLOAT:
zErrDyn = sqlite3DbStrDup(db, "Invalid key value");
rc = SQLITE_ERROR;
break;
case SQLITE_TEXT:
case SQLITE_BLOB:
nKey = sqlite3_value_bytes(argv[2]);
zKey = (char *)sqlite3_value_blob(argv[2]);
sqlite3CodecAttach(db, db->nDb-1, zKey, nKey);
break;
case SQLITE_NULL:
/* No key specified. Use the key from the main database */
sqlite3CodecGetKey(db, 0, (void**)&zKey, &nKey);
sqlite3CodecAttach(db, db->nDb-1, zKey, nKey);
break;
}
}
#endif
/* If the file was opened successfully, read the schema for the new database.
** If this fails, or if opening the file failed, then close the file and
** remove the entry from the db->aDb[] array. i.e. put everything back the way
** we found it.
*/
if( rc==SQLITE_OK ){
(void)sqlite3SafetyOn(db);
sqlite3BtreeEnterAll(db);
rc = sqlite3Init(db, &zErrDyn);
sqlite3BtreeLeaveAll(db);
(void)sqlite3SafetyOff(db);
}
if( rc ){
int iDb = db->nDb - 1;
assert( iDb>=2 );
if( db->aDb[iDb].pBt ){
sqlite3BtreeClose(db->aDb[iDb].pBt);
db->aDb[iDb].pBt = 0;
db->aDb[iDb].pSchema = 0;
}
sqlite3ResetInternalSchema(db, 0);
db->nDb = iDb;
if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){
db->mallocFailed = 1;
sqlite3DbFree(db, zErrDyn);
zErrDyn = sqlite3MPrintf(db, "out of memory");
}else if( zErrDyn==0 ){
zErrDyn = sqlite3MPrintf(db, "unable to open database: %s", zFile);
}
goto attach_error;
}
return;
attach_error:
/* Return an error if we get here */
if( zErrDyn ){
sqlite3_result_error(context, zErrDyn, -1);
sqlite3DbFree(db, zErrDyn);
}
if( rc ) sqlite3_result_error_code(context, rc);
}
