Esempio n. 1
0
File: bl08.c Progetto: Noah1989/bl08
int callMonitor(int mon, int ctrlbyt, int accu, int faddr, int laddr) {
	int SP;

	image[ CTRLBYT ] = ctrlbyt; // CTRLBYT BIT 6  =  1  = > mass erase
	image[ CPUSPD ] = CPUSPEED; // CPUSPD  =  16 MHz ext clock  = > 4 MHz Fbus speed  = > 8
	if (verbose>3)
		flsprintf(stdout,"CPUSPEED=%02X\n",CPUSPEED);
	image[ LADDR ] = laddr>>8;
	image[ LADDR+1 ] = laddr&0xFF;
	writeMemory(MONDATA, 4, 0);
		
	if (WORKRAM>0xFF) {
		flsprintf(stderr,"Work RAM must be on zero page\n");
		abort();
		}

	if (lastMon!=mon) {
		// construct small HC908 code fragment to call the monitor function and return results
		int i = WORKRAM;
		
		image[ i++ ] = 0xCD; // JSR mon ; calls the monitor routine
		image[ i++ ] = mon>>8;
		image[ i++ ] = mon&0xFF;

		image[ i++ ] = 0x83; // SWI ; return to monitor
		
		if (WORKRAM>=WORKTOP) { // leave some stack space for monitor routines
			flsprintf(stderr,"Not enough WORKRAM on target\n");
			abort();
			}
		
		writeMemory(WORKRAM , i-WORKRAM , 0);
		lastMon=mon;
		}
Esempio n. 2
0
 void TED7360::reset(bool cold_reset)
 {
   if (cold_reset) {
     // reset TED registers
     this->initRegisters();
     // make sure that RAM size is detected correctly
     for (uint8_t j = 0xC0; j < 0xFF; j++) {
       if ((j & uint8_t(0x02)) != uint8_t(0) &&
           !(j == uint8_t(0xFE) && segmentTable[0xFC] == (uint8_t *) 0))
         continue;
       if (segmentTable[j] != (uint8_t *) 0) {
         for (uint16_t i = 0x3FFD; i > 0x3FF5; i--) {
           if (segmentTable[j][i] != readMemory(i | 0xC000))
             break;
           if (i == 0x3FF6) {
             segmentTable[j][i] =
                 (segmentTable[j][i] + uint8_t(1)) & uint8_t(0xFF);
           }
         }
       }
     }
     // force RAM testing
     writeMemory(0x0508, 0x00);
   }
   // reset ROM banking
   writeMemory(0xFDD0, 0x00);
   // reset CPU
   writeMemory(0x0000, 0x00);
   writeMemory(0x0001, 0x00);
   M7501::reset(cold_reset);
 }
Esempio n. 3
0
//
// Execute will execute the code in the target process/thread,
// the techinique for PTRACE is to read CPU state, rewrite the
// code portion pointed by PC with the code, resuming the process/thread,
// wait for the completion, read the CPU state back to grab return
// values, then restoring the previous code.
//
ErrorCode PTrace::execute(ProcessThreadId const &ptid, ProcessInfo const &pinfo,
                          void const *code, size_t length, uint64_t &result) {
  Architecture::CPUState savedState, resultState;
  std::string savedCode;

  if (!ptid.valid() || code == nullptr || length == 0)
    return kErrorInvalidArgument;

  // 1. Read and save the CPU state
  ErrorCode error = readCPUState(ptid, pinfo, savedState);
  if (error != kSuccess)
    return error;

  // 2. Copy the code at PC
  savedCode.resize(length);
  error = readMemory(ptid, savedState.pc(), &savedCode[0], length);
  if (error != kSuccess)
    return error;

  // 3. Write the code to execute at PC
  error = writeMemory(ptid, savedState.pc(), code, length);
  if (error != kSuccess)
    goto fail;

  // 3. Resume and wait
  error = resume(ptid, pinfo);
  if (error == kSuccess) {
    error = wait(ptid);
  }

  if (error == kSuccess) {
    // 4. Read back the CPU state
    error = readCPUState(ptid, pinfo, resultState);
    if (error == kSuccess) {
      // 5. Save the result
      result = resultState.retval();
    }
  }

  // 6. Write back the old code
  error = writeMemory(ptid, savedState.pc(), &savedCode[0], length);
  if (error != kSuccess)
    goto fail;

  // 7. Restore CPU state
  error = writeCPUState(ptid, pinfo, savedState);
  if (error != kSuccess)
    goto fail;

  // Success!! We injected and executed code!
  return kSuccess;

fail:
  return kill(ptid, SIGKILL); // we can't really do much at this point :(
}
Esempio n. 4
0
void LMVCache::displaceLine(CacheLine *cl)
{
  if (cl->isInvalid())
    return;

  wrLVIDEnergy->inc();

  if (cl->accessLine()) {
    // The cache may be killed or restarted. The cache line state must be
    // updated accordingly
    I(cl->isInvalid());
    return;
  }

  if (!cl->isSafe()) {
#ifdef TS_TIMELINE
    TraceGen::add(cl->getVersionRef()->getId(),"Disp=%lld",globalClock);
#endif
    taskHandler->restart(cl->getVersionRef());
    nRestartDisp.inc();
    cl->invalidate();
    return;
  }

  if (cl->isRestarted() || !cl->hasState()) {
    // Note: It is possible to send (cl->isSafe() && !cl->isDirty()), but then
    // the locality is much worse.
    cl->invalidate();
    return;
  }

#ifndef TS_VICTIM_DISPLACE_CLEAN
  if (!cl->isDirty()) {
    I(cl->isSafe());
    cl->invalidate();
    return;
  }
#endif

  PAddr paddr = cl->getPAddr();

  I(!isCombining(paddr));

#ifdef TS_VICTIM_DISPLACE_CLEAN
  writeMemory(paddr);
#else
  if (cl->isDirty())
    writeMemory(paddr);
#endif
  cl->invalidate();
  I(cl->isInvalid());

  return;
}
Esempio n. 5
0
int main(int argc, char** argv)
{
	if(argc < 3)
		usage();

	long rsaptr = getRSAPointer(argv[1]);
	long hostptr = getHostPointer(argv[1]);

	printf("%lo   %lo", rsaptr, hostptr);

	int childpid = fork();
	if(childpid == -1)
		fatal("Unable to fork.");

	if(childpid == 0)
	{
		printf("I'm the child");
		//chdir(TIBIA_ENV);
		execl(TIBIA_PATH, (const char*) NULL, (char*) NULL);
		exit(0);
	}

	sleep(2);
	pid_t pid = findPid("Tibia");

	//write RSA key
	char data[310] = "";
	strcpy(data, RSA_KEY);
	writeMemory(pid, rsaptr, data, RSALEN);
	
	//DEBUG
	readMemory(pid, rsaptr, data, RSALEN);
	printf("rsa: %s\n", data);
	//DEBUG
	
	//read pointer to Hostname struct
	unsigned char ptrdata[4] = "";
	readMemory(pid, hostptr, ptrdata, 4);

	//read offset+4 on Hostname struct
	readMemory(pid, chartohex(ptrdata)+4, ptrdata, 4);
	char loc[26] = "";
   	strcpy(loc,argv[2]);
	int len = 26;
	writeMemory(pid, chartohex(ptrdata), loc, len); 

	readMemory(pid,chartohex(ptrdata), data, 30);
	printf("IP changed to: %s\n", data);

	return 1;
}
Esempio n. 6
0
void LMVCache::combineInit(CacheLine *cl)
{
  I(cl);
  I(cl->isSafe());
#ifndef TS_VICTIM_DISPLACE_CLEAN
  I(cl->isDirty());
#endif

  PAddr paddr = cl->getPAddr();

  wrLVIDEnergy->inc();
  combWriteEnergy->inc();

  I(!isCombining(paddr));
  
  if (cl->isLeastSpecLine()) {
#ifndef TS_VICTIM_DISPLACE_CLEAN
    I(cl->isDirty());
#endif
    writeMemory(paddr);
    combineHalfMiss.inc();
    cl->invalidate();
    return;
  }

  combineInit(paddr, cl->getVersionDuplicate(), cl);

  I(cl->isInvalid());
}
Esempio n. 7
0
int BeeServer::main(const std::vector<std::string>& args)
{
		
	if (_serverState == SERVER_IDLE)
	{
		//create shared memory if start with non params
		readMemory();
		_serverFlag = true;
		setServerState(SERVER_RUNNING);
		writeMemory(_serverState);
		ServerArgv* exRun  = new ServerArgv(*this);
		_exThread.start(*exRun);

		//BeeTask* pTask = new BeeTask();
		//string rule = Application::instance().config().getString("rule");
		//pTask->setRule(rule);
		
		//TaskManager tm;
		//tm.start(pTask);
		task();
		waitForTerminationRequest();
		//tm.cancelAll();
		//tm.joinAll();

	}
	return Application::EXIT_OK;
}
Esempio n. 8
0
void Recompiler::stwx(Instruction code)
{
    llvm::Value* addr;
    llvm::Value* rs = getGPR(code.rs);

    addr = builder.CreateAdd(getGPR(code.ra), getGPR(code.rb));
    writeMemory(addr, rs);
}
Esempio n. 9
0
///////////////////////////////////////////////////////////////////////////////
//////////////////////////////////STA opcodes//////////////////////////////////
///////////////////////////////////////////////////////////////////////////////
void opcode0x85(uint8_t* data)
{
    printf("%s%s%s", opcodeEncStart, opcode0x85Encountered, opcodeEncEnd);
    printf("OP_PARSE: Operand is 0x%02X\n", data[1]);
    writeMemory(data[1], accu); // Load the value at memory address [OPERAND] into accumulator
    pcnt += 2;

    return;
}
Esempio n. 10
0
void Recompiler::stfdx(Instruction code)
{
    llvm::Value* addr;
    llvm::Value* frs = getFPR(code.frs);

    addr = builder.CreateAdd(getGPR(code.ra), getGPR(code.rb));
    frs = builder.CreateBitCast(frs, builder.getInt64Ty());
    writeMemory(addr, frs);
}
Esempio n. 11
0
void opcode0x91(uint8_t* data)
{
    printf("%s%s%s", opcodeEncStart, opcode0x91Encountered, opcodeEncEnd);
    printf("OP_PARSE: Operand is 0x%02X\n", data[1]);
    writeMemory((data[1]) + yreg, accu);
    pcnt += 2;

    return;
}
Esempio n. 12
0
void opcode0x99(uint8_t* data)
{
    printf("%s%s%s", opcodeEncStart, opcode0x99Encountered, opcodeEncEnd);
    uint16_t memoryAddress = (data[1] << 8) | data[2];
    printf("OP_PARSE: Operand is 0x%04X\n", memoryAddress);
    writeMemory(memoryAddress + yreg, accu);
    pcnt += 3;

    return;
}
Esempio n. 13
0
void Recompiler::stwu(Instruction code)
{
    llvm::Value* addr = builder.getInt64(code.ds << 2);
    llvm::Value* rs = getGPR(code.rs);

    addr = builder.CreateAdd(addr, getGPR(code.ra));
    writeMemory(addr, rs);

    setGPR(code.ra, addr);
}
Esempio n. 14
0
ErrorCode ProcessBase::writeMemoryBuffer(Address const &address,
                                         std::string const &buffer,
                                         size_t *nwritten) {
  if (_pid == kAnyProcessId)
    return kErrorProcessNotFound;
  else if (!address.valid())
    return kErrorInvalidArgument;

  return writeMemory(address, &buffer[0], buffer.length(), nwritten);
}
Esempio n. 15
0
void ResetCommArea( void )
{
    if( CommonAddr.segment != 0 ) {     /* reset common variables */
        Comm.pop_no = 0;
        Comm.push_no = 0;
        CommonAddr.offset += 9;
        writeMemory( &CommonAddr, 4, (char *)&Comm.pop_no );
        CommonAddr.offset -= 9;
    }
}
Esempio n. 16
0
void BeeServer::stop(const std::string& name, const std::string& value)
{
	readMemory();
	if (_serverState != SERVER_RUNNING)
	{
		std::cout<<"System is not in running!"<<std::endl;		
	}
	
	setServerState(SERVER_FINISHED);	
	writeMemory(_serverState);	
}
Esempio n. 17
0
void Recompiler::stw(Instruction code)
{
    llvm::Value* addr = builder.getInt64(code.d);
    llvm::Value* rs = getGPR(code.rs);

    if (code.ra) {
        addr = builder.CreateAdd(addr, getGPR(code.ra));
    }

    writeMemory(addr, rs);
}
Esempio n. 18
0
void Recompiler::stfd(Instruction code)
{
    llvm::Value* addr = builder.getInt64(code.d);
    llvm::Value* frs = getFPR(code.frs);

    if (code.ra) {
        addr = builder.CreateAdd(addr, getGPR(code.ra));
    }

    frs = builder.CreateBitCast(frs, builder.getInt64Ty());
    writeMemory(addr, frs);
}
Esempio n. 19
0
void Recompiler::stfsux(Instruction code)
{
    llvm::Value* addr;
    llvm::Value* frs = getFPR(code.frs);

    addr = builder.CreateAdd(getGPR(code.ra), getGPR(code.rb));
    frs = builder.CreateFPTrunc(frs, builder.getFloatTy());
    frs = builder.CreateBitCast(frs, builder.getInt32Ty());
    writeMemory(addr, frs);

    setGPR(code.ra, addr);
}
Esempio n. 20
0
int MemoryMap::processWriteCommand(MEMMAP_Message& msg)
{
    int counter;
    unsigned char address;
    unsigned char value;

    for(counter=0;counter<msg.Field.Length;counter++){
	address = msg.Field.Address + counter;
	value = msg.Field.data[counter];
	writeMemory(address,value);
    }

    return true;
}
Esempio n. 21
0
void LMVCache::combineInit(const VMemPushLineReq *vreq)
{
  I(vreq);
  I(vreq->getVersionRef()->isSafe());

  PAddr paddr = vreq->getPAddr();
  I(!isCombining(paddr));

  combWriteEnergy->inc();

  if (vreq->getStateRef()->isLeastSpecLine()) {
    // write to a non-version cache
    combineHit.inc();
#ifdef TS_VICTIM_DISPLACE_CLEAN
    writeMemory(paddr);
#else
    if (vreq->getStateRef()->isDirty())
      writeMemory(paddr);
#endif
    return;
  }

  combineInit(paddr, vreq->getVersionDuplicate(), vreq->getStateRef());
}
Esempio n. 22
0
File: bl08.c Progetto: Noah1989/bl08
int runFrom(int PC, int A, int CC, int HX) {
	int SP=readSP();
	if (verbose>2) 
		flsprintf(stdout,"Execute code PC=%04X A=%02X CC=%02X H:X=%04X SP=%04X\n",PC,A,CC,HX,SP);
	image[ SP + 1 ] = HX >> 8;
	image[ SP + 2 ] = CC;
	image[ SP + 3 ] = A;
	image[ SP + 4 ] = HX & 0xFF;
	image[ SP + 5 ] = PC >> 8;
	image[ SP + 6 ] = PC & 0xFF;
	writeMemory(SP + 1 , 6 , 0);
	sendByte(0x28); // Monitor mode RUN command
	//struct timespec tspec;
	//tspec.tv_sec=0;
	//tspec.tv_nsec=5000000; /* wait at least 1 ms (datasheet specifies 11 bit times) */
	//nanosleep(&tspec,0);
	return SP;
	}	
Esempio n. 23
0
void opcode0x16(uint8_t* data)
{
    uint8_t memoryValue=0;
    printf("%s%s%s", opcodeEncStart, opcode0x16Encountered, opcodeEncEnd);
    printf("OP_PARSE: Operand is 0x%02X\n", data[1]);

    memoryValue = readMemory(data[1] + xreg);

    // Set the carry flag if bit 7 (8) is set
    auxSetCarryFlag(memoryValue);

    memoryValue = memoryValue << 1;

    // Set the negative flag if bit 7 (8) is set
    auxSetNegativeFlag(memoryValue);

    writeMemory((data[1] + xreg), memoryValue);

    pcnt += 2;
    return;
}
Esempio n. 24
0
Error rntFlyAsm(unsigned int address, char *cmd)
{
	MemCell		memcell,
			value;
	Error		rval;
	char		buff[111];

	rval = parseAsmInstr(cmd, &memcell);
	if(rval != ERR_None)
	{
		consoleOut("Error parsing asm instruction\n");
		return rval;
	}

	rval = writeMemory(address, memcell);
	if(rval != ERR_None)
	{
		consoleOut("Error writing to memory\n");
		return rval;
	}
	else
	{
		ProcInfo info;

		if(memoryChanged(&address, &value) != ERR_InvalidState)
		{
			sprintf(buff, "  [Memory] %010u:\t%d (%s)\n", address, value.getal, cmd);
			consoleOut(buff);
		}

		// Next instruction could have changed
		info = getStatus();
		if(info.progCounter == address)
		{
			rntDisplayStatus();
		}
	}

	return ERR_None;
}
Esempio n. 25
0
void opcode0x0E(uint8_t* data)
{
    uint8_t memoryValue=0;
    printf("%s%s%s", opcodeEncStart, opcode0x0EEncountered, opcodeEncEnd);
    uint16_t memoryAddress = (data[1] << 8) | data[2];
    printf("OP_PARSE: Operand is 0x%04X\n", memoryAddress);

    memoryValue = readMemory(memoryAddress);

    // Set the carry flag if bit 7 (8) is set
    auxSetCarryFlag(memoryValue);

    memoryValue = memoryValue << 1;

    // Set the negative flag if bit 7 (8) is set
    auxSetNegativeFlag(memoryValue);

    writeMemory(memoryAddress, memoryValue);

    pcnt += 3;
    return;
}
Esempio n. 26
0
void OdyPatch::writePatch(unsigned char patchNum)
{
	unsigned int startAddr = (unsigned int)PATCH_SIZE * patchNum;
	unsigned int addr = 0;
	unsigned char i;
	unsigned char data[PATCH_SIZE];
	for(i=0;i<10;++i)
	{
		data[addr] = funcValue_c_[i];
		addr++;
	}
	for(i=0;i<6;++i)
	{
		data[addr] = ctrlValue_[i];
		addr++;
	}
	for(i=0;i<2;++i)   //no need to read/write last 3 func opts
	{
		data[addr] = optionValue_c_[i];
		addr++;
	}
	writeMemory((const void*)data, (void*)startAddr, sizeof(data));
}
Esempio n. 27
0
File: bl08.c Progetto: Noah1989/bl08
void connectTarget() {
	int j;
	if (connected)
		return;

	flsprintf(stdout, "Security code: ");
	for (j = 0; j<8; ++j) {
		sendByte(scode[j]);
	        flsprintf(stdout, ".");
		}
	flsprintf(stdout, " ");

	flushBreak();
	readMemory(RAM, 1 , 0);
	connected=1;
	if ((image[ RAM ] & 0x40) == 0)
		flsprintf(stdout,"failed\n");
	else
		flsprintf(stdout,"passed\n");
	
	// in case FLBPR is RAM based we clear it first by just writing it
	image[FLBPR]=0xFF;
	writeMemory(FLBPR,1,0);
	}
Esempio n. 28
0
int main(int argc, char *argv[]) {
	// A201860038A00798E903A818A9028501A60165008501860088D0F5
	// const char program[] = { 0xC8, 0x20, 0x00, 0x00 };
	// const char program[] = { 0xA2, 0x01, 0x86, 0x00, 0x38, 0xA0, 0x07, 0x98, 0xE9, 0x03, 0xA8, 0x18, 0xA9, 0x02, 0x85, 0x01, 0xA6, 0x01, 0x65, 0x00, 0x85, 0x01, 0x86, 0x00, 0x88, 0xD0, 0xF5 };

	if(argc != 2) {
		printf("Usage: %s program \n", argv[0]);
		return -1;
	}

	char *program;
	int program_length = readFileBytes(argv[1], &program);

	printf("Program (%i bytes): \n", program_length);

	int i;
	for(i = 0; i < program_length; i++) {
		printf("%i:%02X ", i, (unsigned char)program[i]);
	}

	printf("\n");

	CPU cpu;
	initializeCPU(&cpu);

	cpu.pc = 0x4000;
	writeMemory(&cpu, program, cpu.pc, program_length);
	// cpu.pc += 559; // 700 // 799
	// cpu.pc += 799; // test 06
	// cpu.pc += 1192; // test 09

	// char *buf = malloc(sizeof(char) * 2);
	// buf[0] = 0xC0;
	// buf[1] = 0x01;
	// writeMemory(&cpu, buf, 0x0105, 2);

	// cpu.ps = 0x1;

	// cpu.a = 0x7;
	// cpu.x = 0x2;
	// cpu.y = 0x3;

	// char *buf2 = malloc(sizeof(char) * 2);
	// buf2[0] = 0x08;
	// buf2[1] = 0xEE;
	// writeMemory(&cpu, buf2, 0x0105, 2);

	// printf("cpu->ps: %i\n", cpu.ps);
	// printf("cpu->sp: %i\n", cpu.sp);

	char str[1];
	// int i;

	for(;;) {
		printf("cpu->pc: %i\n", cpu.pc);
		// scanf("%s", str);
		step(&cpu);
		printMemory(&cpu);
		printf("\n\n\n");
		printf("cpu->sp: %x\n", cpu.sp);
		printf("cpu->a: %x\n", cpu.a);
		printf("cpu->x: %x\n", cpu.x);
		printf("cpu->y: %x\n", cpu.y);
		printf("cpu->ps: %x\n\n", cpu.ps);

		if(cpu.pc == 17825) {
			break;
		}
	}

	printMemory(&cpu);

	printf("### results:\n");
	printf("cpu->sp: %x\n", cpu.sp);
	printf("cpu->a: %x\n", cpu.a);
	printf("cpu->x: %x\n", cpu.x);
	printf("cpu->y: %x\n", cpu.y);
	printf("cpu->ps: %x\n", cpu.ps);
	printf("cpu->cycles: %i\n", cpu.cycles);
	// printf("%s\n", );
	// printbitssimple(cpu.ps);	
	printf("MEMORY 9: %x\n", *cpu.memory[0x80]);
	printf("MEMORY final: %x\n", *cpu.memory[0x0210]);

	freeCPU(&cpu);

	return 0;
}
Esempio n. 29
0
void executeVm(Cpu_t *cpu)
{
  uint16_t tmp;
  uint16_t mode;
  uint16_t instr,k;
  //SYSTEMOUTHEX("\npc:",cpu->Pc);
  tmp=readMemory(cpu,IMM);
  //SYSTEMOUTHEX(" instr code:",tmp);
  //showCpu(cpu);
  //SYSTEMOUTHEX("pc:",cpu->Pc);
  mode=tmp&03000;
  instr=tmp&0777;

  switch(instr)
  {
    // ALU instructions
    // two word instructions
    // instruction with addressing mode, operand
    //#define NOP2   00000 // A->A nop with 2 instructions
    case NOP2:{
      DISASM("NOP2");
      INCPC(cpu);
    }break;
    //#define MINUS  00006 // A-M-1 -> A
    case MINUS:{
      DISASM("MINUS");
      INCPC(cpu);
      tmp=readMemory(cpu,mode);
      cpu->A-=tmp;
      cpu->A--;
      if(cpu->flags&(1<<AF_FLAG))cpu->A++;
      if(cpu->A>0777)cpu->flags|=(1<<AF_FLAG);
      else cpu->flags&=~(1<<AF_FLAG);
      cpu->A&=0777;
    }break;
    //#define PLUS   00011 // A+M -> A
    case PLUS:{
      DISASM("PLUS");
      INCPC(cpu);
      //SYSTEMOUTHEX("@:",cpu->Pc);
      tmp=readMemory(cpu,mode);
      //SYSTEMOUTHEX("plus:",tmp);
      cpu->A+=tmp;
      if(cpu->flags&(1<<AF_FLAG))cpu->A++;
      if(cpu->A>0777)cpu->flags|=(1<<AF_FLAG);
      else cpu->flags&=~(1<<AF_FLAG);
      cpu->A&=0777;
    }break;
    //#define DOUBLE 00014 // A*2 -> A, operand not used
    case DOUBLE:{
      DISASM("DOUBLE");
      INCPC(cpu);
      tmp=readMemory(cpu,mode);
      cpu->A=2*tmp;
      //if(cpu->flags&(1<<AF_FLAG))cpu->A++;
      if(cpu->A>0777)cpu->flags|=(1<<AF_FLAG);
      else cpu->flags&=~(1<<AF_FLAG);
      cpu->A&=0777;
    }break;
    //#define DEC    00017 // A-1 -> A, operand not used
    case DEC:{
      DISASM("DEC");
      INCPC(cpu);
      //tmp=readMemory(cpu,mode);
      cpu->A--;
      //if(cpu->flags&(1<<AF_FLAG))cpu->A++;
      //if(cpu->A>0777)cpu->flags|=(1<<AF_FLAG);
      //else cpu->flags&=~(1<<AF_FLAG);
      cpu->A&=0777;
    }break;
    //#define INV    00020 // NOT A -> A, operand not used
    case INV:{
      DISASM("INV");
      INCPC(cpu);
      cpu->A=~cpu->A;
      cpu->A&=0777;
    }break;
    //#define NOR    00021 // A NOR M -> A
    case NOR:{
      DISASM("NOR");
      INCPC(cpu);
      tmp=readMemory(cpu,mode);
      cpu->A=~(cpu->A|tmp);
      cpu->A&=0777;
    }break;
    //#define ZERO   00023 // 0 -> A -> A
    case ZERO:{
      DISASM("ZERO");
      INCPC(cpu);
      cpu->A=0;
    }break;
    //#define NAND   00024 // A NAND M -> A
    case NAND:{
      DISASM("NAND");
      INCPC(cpu);
      tmp=readMemory(cpu,mode);
      cpu->A=~(cpu->A&tmp);
      cpu->A&=0777;
    }break;
    //#define INVM   00025 // NOT M -> A
    case INVM:{
      DISASM("INVM");
      INCPC(cpu);
      tmp=readMemory(cpu,mode);
      cpu->A=~tmp;
      cpu->A&=0777;
    }break;
    //#define EXOR   00026 // A EXOR M -> A
    case EXOR:{
      DISASM("EXOR");
      INCPC(cpu);
      tmp=readMemory(cpu,mode);
      cpu->A=(cpu->A^tmp);
      cpu->A&=0777;
    }break;
    //#define EXNOR  00031 // A EXNOR M -> A
    case EXNOR:{
      DISASM("EXNOR");
      INCPC(cpu);
      tmp=readMemory(cpu,mode);
      cpu->A=~(cpu->A^tmp);
      cpu->A&=0777;
    }break;
    //#define AND    00033 // A and M -> A
    case AND:{
      DISASM("AND");
      INCPC(cpu);
      tmp=readMemory(cpu,mode);
      cpu->A=(cpu->A&tmp);
      cpu->A&=0777;
    }break;
    //#define ONES   00034 // 0777->A set all ones
    case ONES:{
      DISASM("ZERO");
      INCPC(cpu);
      cpu->A=0777;
    }break;
    //#define OR     00036 // A or M -> A
    case OR:{
      DISASM("OR");
      INCPC(cpu);
      tmp=readMemory(cpu,mode);
      cpu->A=(cpu->A|tmp);
      cpu->A&=0777;
    }break;
    //******************************************************
    // stack instructions
    //******************************************************
    //#define PLPC   00600 // pull PC ( return )
    case PLPC:{
      DISASM("PLPC (return)");
      cpu->Pc=pop(cpu)-1;
    }break;
    //#define PLP    00601 // pull P
    case PLP:{
      DISASM("PLP ( display )");
      cpu->display=pop(cpu)-1;
    }break;
    //#define PLIO   00602 // pull I/O
    case PLIO:{
      DISASM("PLIO (outport)");
      cpu->outport=pop(cpu)-1;
    }break;
    //#define PLA    00603 // pull A
    case PLA:{
      DISASM("PLA");
      cpu->A=pop(cpu)-1;
    }break;
    //#define PHPC   00604 // push PC
    case PHPC:{
      DISASM("PHPC");
      push(cpu,cpu->Pc); // warning: check if original T3 pushes next address
    }break;
    //#define PHP    00614 // push P
    case PHP:{
      DISASM("PHP (keys)");
      push(cpu,cpu->keys);
    }break;
    //#define PHIO   00624 // push I/O
    case PHIO:{
      DISASM("PHIO (outport)");
      push(cpu,cpu->outport);
    }break;
    //#define PHA    00634 // push A
    case PHA:{
      DISASM("PHA");
      push(cpu,cpu->A);
    }break;
    //******************************************************
    // register memory transfer instructions
    //******************************************************
    //#define STPC   00100 // PC -> M
    case STPC:{
      DISASM("STPC");
      INCPC(cpu);
      writeMemory(cpu,mode,cpu->Pc);
    }break;
    //#define STP    00110 // P -> M
    case STP:{
      DISASM("STP");
      INCPC(cpu);
      writeMemory(cpu,mode,cpu->keys);
    }break;
    //#define STIO   00120 // I/O -> M
    case STIO:{
      DISASM("STIO");
      INCPC(cpu);
      writeMemory(cpu,mode,cpu->inport);
    }break;
    //#define STA    00130 // A -> M
    case STA:{
      DISASM("STA");
      INCPC(cpu);
      writeMemory(cpu,mode,cpu->A);
    }break;
    //#define LDPC   00104 // M -> PC
    case LDPC:{
      DISASM("LDA");
      INCPC(cpu);
      cpu->A=readMemory(cpu,mode);
    }break;
    //#define LDP    00105 // M -> P
    case LDP:{
      DISASM("LDP");
      INCPC(cpu);
      cpu->display=readMemory(cpu,mode);
    }break;
    //#define LDIO   00106 // M -> I/O
    case LDIO:{
      DISASM("LDP");
      INCPC(cpu);
      cpu->outport=readMemory(cpu,mode);
    }break;
    //#define LDA    00107 // M -> A
    case LDA:{
      DISASM("LDA");
      INCPC(cpu);
      cpu->A=readMemory(cpu,mode);
    }break;
    // compare instructions
    //******************************************************
    // compare instruction
    //******************************************************
    //#define CMP    00200 // A-M -> FLG
    case CMP:{
      DISASM("CMP");
      INCPC(cpu);
      tmp=readMemory(cpu,mode);
      cpu->flags&=~((1<<EQ_FLAG)|(1<<GT_FLAG)|(1<<SM_FLAG)|(1<<MSB_FLAG));
      //#define EQ_FLAG      0  // A = OPR
      if(tmp==cpu->A)cpu->flags|=(1<<EQ_FLAG);

      //printf("a:%x  dest:%x\n",cpu->A,tmp);
      //#define GT_FLAG      1  // A > OPR
      if(tmp>cpu->A)cpu->flags|=(1<<GT_FLAG);
      //#define SM_FLAG      2  // A < OPR
      if(tmp<cpu->A)cpu->flags|=(1<<SM_FLAG);
      //#define ALU_FLAG     3  //
      //#define MSB_FLAG     4  // MSB of A
      if(cpu->A&0400)cpu->flags|=(1<<MSB_FLAG);
    }break;
    //******************************************************
    // machine control instructions
    //******************************************************
    //#define RST    00400 // 0001->PC
    case RST:{
      DISASM("RST");
      cpu->Pc=1;
    }break;
    //#define STOP   00401 // stop
    case STOP:{
      DISASM("STOP");
      cpu->Pc--;
    }break;
    //#define RSD    00402 // reset display
    case RSD:{
      DISASM("RSD");
      cpu->display=0;
    }break;
    //#define SHIB   00403 // select high bank
    case SHIB:{
      DISASM("select high bank");
      cpu->bank=1;
    }break;
    //#define SLOB   00404 // select low bank
    case SLOB:{
      DISASM("select low bank");
      cpu->bank=0;
    }break;
    //#define RSSP   00405 // 0->SP, reset stack pointer
    case RSSP:{
      DISASM("RSSP");
      cpu->Sp=0;
    }break;
    //#define RSA    00406 // 0->ACCU, reset accumulator
    case RSA:{
      DISASM("RSA");
      cpu->A=0;
    }break;
    //#define STB    00407 // strobe ?
    case STB:{
      DISASM("strobe?");
    }break;
    //SAF    00410 // set accu flag ( AF_FLAG )
    case SAF:{
      DISASM("SAF");
      cpu->flags|=(1<<AF_FLAG);
    }break;
    //#define CAF    00411 // clear accu flag ( AF_FLAG )
    case CAF:{
      DISASM("CAF");
      cpu->flags&=~(1<<AF_FLAG);
    }break;
    //#define SSF    00412 // set shift flag ( SF_FLAG )
    case SSF:{
      DISASM("SSF");
      cpu->flags|=(1<<SF_FLAG);
    }break;
    //#define CSF    00413 // clear shift flag ( SF_FLAG )
    case CSF:{
      DISASM("CSF");
      cpu->flags&=~(1<<SF_FLAG);
    }break;
    //#define NOP1   00414 // one word nop
    case NOP1:{
      DISASM("NOP1");
    }break;
    //******************************************************
    // register register transfer instructions
    //******************************************************
    //#define TPCP   00501 // PC -> P // PC -> display
    case TPCP:{
      DISASM("TPCP");
      cpu->display=cpu->Pc;
    }break;
    //#define TPCIO  00502 // PC -> IO ( outport )
    case TPCIO:{
      DISASM("TPCIO");
      cpu->outport=cpu->Pc;
    }break;
    //#define TPCA   00503 // PC -> A
    case TPCA:{
      DISASM("TPCA");
      cpu->A=cpu->Pc;
    }break;
    //#define TPPC   00510 // (keys) P -> PC
    case TPPC:{
      DISASM("TPPC (keys)");
      cpu->Pc=cpu->keys;
    }break;
    //#define TPP    00511 // P -> P read keyboard, write display
    case TPP:{
      DISASM("TPP (keys->display)");
      cpu->display=cpu->keys;
    }break;
    //#define TPIO   00512 // P -> IO
    case TPIO:{
      DISASM("TPIO (keys->outport)");
      cpu->outport=cpu->keys;
    }break;
    //#define TPA    00513 // P -> A // keys -> A
    case TPA:{
      DISASM("TPIO (keys->outport)");
      cpu->A=cpu->keys;
    }break;
    //#define TIOPC  00520 // IO->PC
    case TIOPC:{
      DISASM("TIOPC (inport->pc)");
      cpu->Pc=cpu->inport;
    }break;
    //#define TIOP   00521 // IO->P
    case TIOP:{
      DISASM("TIOP (inport->display)");
      cpu->display=cpu->inport;
    }break;
    //#define TIOA   00523 // IO->A
    case TIOA:{
      DISASM("TIOA");
      cpu->A=cpu->inport;
    }break;
    //#define TAPC   00530 // A->PC ( variable jump )
    case TAPC:{
      DISASM("TAPC (jmp(A))");
      cpu->Pc=cpu->A;
    }break;
    //#define TAP    00531 // A->P store A in display
    case TAP:{
      DISASM("TAP");
      cpu->display=cpu->A;
    }break;
    //#define TAIO   00532 // A->IO store A in outport
    case TAIO:{
      DISASM("TAIO");
      cpu->outport=cpu->A;
    }break;

    //******************************************************
    // masked functions
    //******************************************************
    default:{
      tmp=instr&JMPMASK;
      uint8_t flags;
      flags=instr&FLAGMASK;
      //ERROR("instr", tmp);
      SYSTEMOUTHEX("flag selector",flags);
      SYSTEMOUTHEX("      cpu.flags",cpu->flags);
SYSTEMOUTCR;
      switch(tmp)
      {
      //******************************************************
      // program flow instructions
      //******************************************************
        case JMPS:{
          DISASM("JMPS");
          INCPC(cpu);
          if(cpu->flags&(1<<flags))
            {
              DISASM("jump");
              cpu->Pc=readMemory(cpu,mode)-1;
            }
        }break;
        case JMPR:{
          DISASM("JMPR");
          INCPC(cpu);
          if(!(cpu->flags&(1<<flags)))
          {
            DISASM("jump");
            cpu->Pc=readMemory(cpu,mode)-1;
          }
        }break;
        case GSBS:{
          DISASM("GSBS");
          INCPC(cpu);
          if(cpu->flags&(1<<flags))
          {
            DISASM(" (call)");
            push(cpu,cpu->Pc+1);
            cpu->Pc=readMemory(cpu,mode)-1;
          }
        }break;
        case GSBR:{
          DISASM("GSBR");
          INCPC(cpu);
          if(!(cpu->flags&(1<<flags)))
          {
            DISASM(" (call)");
            push(cpu,cpu->Pc+1);
            cpu->Pc=readMemory(cpu,mode)-1;
            //dumpMem1(cpu);
          }
        }break;

        default:
        {
          //******************************************************
          // shift instructions
          //******************************************************
          tmp=instr&SHIFTMASK;
          uint8_t shift=instr&07;
          switch(tmp)
          {
            //#define ROL 00700 // rotate left n bits
            case ROL:{
              tmp=cpu->A;
              tmp=tmp<<shift;
              tmp|=cpu->A>>(13-shift);
              if(tmp&010000)cpu->flags|=(1<<SF_FLAG);
              else cpu->flags&=~(1<<SF_FLAG);
              cpu->A=tmp&0777;
            }break;
            //#define ROR 00710 // rotate right n bits
            case ROR:{
              tmp=cpu->A;
              tmp=tmp>>shift;
              tmp|=cpu->A<<(13-shift);
              if(tmp&010000)cpu->flags|=(1<<SF_FLAG);
              else cpu->flags&=~(1<<SF_FLAG);
              cpu->A=tmp&0777;
            }break;
            //#define SFL 00720 // shift left n bits
            case SFL:{
              tmp=cpu->A;
              tmp=tmp<<shift;
              cpu->A=tmp&0777;
              if(tmp&010000)cpu->flags|=(1<<SF_FLAG);
              else cpu->flags&=~(1<<SF_FLAG);
            }break;
            //#define SFR 00730 // shift right n bits
            case SFR:{
              tmp=cpu->A;
              tmp=tmp>>shift;
              cpu->A=tmp&0777;
              if((cpu->A)>>(shift-1)&1)cpu->flags|=(1<<SF_FLAG);
              else cpu->flags&=~(1<<SF_FLAG);
            }break;
            default:
            {
              ERROR("error: unknown instruction",instr);
              simulatorReset(cpu);
              cpu->Pc--;
            }break;
          }
        }
      }
    }break;
  }
Esempio n. 30
0
void mips1::behavior() {
  
  unsigned ins_id;
  cache_item_t* ins_cache;
  if (has_delayed_load) {
    APP_MEM->load(delayed_load_program);
    ac_pc = ac_start_addr;
    has_delayed_load = false;
  }
  
  for (;;) {
    
    bhv_pc = ac_pc;
    if( bhv_pc >= dec_cache_size){
      cerr << "ArchC: Address out of bounds (pc=0x" << hex << bhv_pc << ")." << endl;
      stop();
      return;
    }
    else {
      if( start_up ){
	decode_pc = ac_pc;
	ISA.syscall.set_prog_args(argc, argv);
	start_up=0;
	init_dec_cache();
      }
      else{ 
	decode_pc = bhv_pc;
      }
      
      //!Handling System calls.
      switch( decode_pc ){
	
#define AC_SYSC(NAME,LOCATION)			\
	case LOCATION:				\
	  ISA.syscall.NAME();			\
	  break;				\
	  
	
#include <ac_syscall.def>
	
#undef AC_SYSC
	
      default:
      
	ins_cache = (DEC_CACHE+decode_pc);
	if ( !ins_cache->valid ){
	  quant = 0;
	  ins_cache->instr_p = new ac_instr<mips1_parms::AC_DEC_FIELD_NUMBER>((ISA.decoder)->Decode(reinterpret_cast<unsigned char*>(buffer), quant));
	  ins_cache->valid = 1;
	}
	instr_vec = ins_cache->instr_p;
	ins_id = instr_vec->get(IDENT);
	
	if( ins_id == 0 ) {
	  cerr << "ArchC Error: Unidentified instruction. " << endl;
	  cerr << "PC = " << hex << decode_pc << dec << endl;
	  stop();
	  return;
	}
	
	ac_pc = decode_pc;
	
	ISA.cur_instr_id = ins_id;
	if (!ac_annul_sig) ISA._behavior_instruction(instr_vec->get(1));
	
	switch (ins_id) {
	case 1: // Instruction lb
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_lb(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 2: // Instruction lbu
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_lbu(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 3: // Instruction lh
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_lh(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 4: // Instruction lhu
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_lhu(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 5: // Instruction lw
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_lw(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 6: // Instruction lwl
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_lwl(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 7: // Instruction lwr
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_lwr(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 8: // Instruction sb
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_sb(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 9: // Instruction sh
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_sh(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 10: // Instruction sw
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_sw(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 11: // Instruction swl
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_swl(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 12: // Instruction swr
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_swr(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 13: // Instruction addi
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_addi(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 14: // Instruction addiu
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_addiu(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 15: // Instruction slti
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_slti(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 16: // Instruction sltiu
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_sltiu(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 17: // Instruction andi
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_andi(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 18: // Instruction ori
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_ori(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 19: // Instruction xori
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_xori(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 20: // Instruction lui
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  if (!ac_annul_sig) ISA.behavior_lui(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
	  break;
	case 21: // Instruction add
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
	  if (!ac_annul_sig) ISA.behavior_add(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
	  break;
	case 22: // Instruction addu
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
	  if (!ac_annul_sig) ISA.behavior_addu(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
	  break;
	case 23: // Instruction sub
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_sub(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 24: // Instruction subu
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_subu(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 25: // Instruction slt
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_slt(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 26: // Instruction sltu
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_sltu(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 27: // Instruction instr_and
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_instr_and(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 28: // Instruction instr_or
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_instr_or(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 29: // Instruction instr_xor
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_instr_xor(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 30: // Instruction instr_nor
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_instr_nor(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 31: // Instruction nop
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_nop(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 32: // Instruction sll
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_sll(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 33: // Instruction srl
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_srl(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 34: // Instruction sra
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_sra(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 35: // Instruction sllv
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_sllv(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 36: // Instruction srlv
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_srlv(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 37: // Instruction srav
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_srav(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 38: // Instruction mult
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_mult(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 39: // Instruction multu
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_multu(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 40: // Instruction div
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_div(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 41: // Instruction divu
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_divu(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 42: // Instruction mfhi
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_mfhi(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 43: // Instruction mthi
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_mthi(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 44: // Instruction mflo
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_mflo(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 45: // Instruction mtlo
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_mtlo(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 46: // Instruction j
        if (!ac_annul_sig) ISA._behavior_mips1_Type_J(instr_vec->get(1), instr_vec->get(8));
        if (!ac_annul_sig) ISA.behavior_j(instr_vec->get(1), instr_vec->get(8));
        break;
      case 47: // Instruction jal
        if (!ac_annul_sig) ISA._behavior_mips1_Type_J(instr_vec->get(1), instr_vec->get(8));
        if (!ac_annul_sig) ISA.behavior_jal(instr_vec->get(1), instr_vec->get(8));
        break;
      case 48: // Instruction jr
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_jr(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 49: // Instruction jalr
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_jalr(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
      case 50: // Instruction beq
        if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
        if (!ac_annul_sig) ISA.behavior_beq(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
        break;
      case 51: // Instruction bne
        if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
        if (!ac_annul_sig) ISA.behavior_bne(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
        break;
      case 52: // Instruction blez
	if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
        if (!ac_annul_sig) ISA.behavior_blez(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
        break;
      case 53: // Instruction bgtz
	if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
        if (!ac_annul_sig) ISA.behavior_bgtz(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
        break;
      case 54: // Instruction bltz
	if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
        if (!ac_annul_sig) ISA.behavior_bltz(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
        break;
      case 55: // Instruction bgez
	if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
        if (!ac_annul_sig) ISA.behavior_bgez(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
        break;
      case 56: // Instruction bltzal
	if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
        if (!ac_annul_sig) ISA.behavior_bltzal(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
        break;
      case 57: // Instruction bgezal
	if (!ac_annul_sig) ISA._behavior_mips1_Type_I(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
        if (!ac_annul_sig) ISA.behavior_bgezal(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(7));
        break;
      case 58: // Instruction sys_call
        if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        if (!ac_annul_sig) ISA.behavior_sys_call(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
        break;
	case 59: // Instruction instr_break
	  if (!ac_annul_sig) ISA._behavior_mips1_Type_R(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
	  if (!ac_annul_sig) ISA.behavior_instr_break(instr_vec->get(1), instr_vec->get(2), instr_vec->get(3), instr_vec->get(4), instr_vec->get(5), instr_vec->get(6));
	  break;
	} // switch (ins_id)
	break;
      }
   
    
      //hit&miss data_cache & instruction_cache
      if(useMemory(ins_id) || writeMemory(ins_id)){
	if(dcache_hit(DC_ADDR,writeMemory(ins_id)))
	  dcount_hit++;
	else
	  dcount_miss++;
      }
      if(icache_hit(ac_pc.read())){
	icount_hit++;
      }
      else{
	icount_miss++;
      }
      
    //end data_cache
    storeInstruction(ins_id,
		     instr_vec->get(2),
		     instr_vec->get(3),
		     instr_vec->get(4));
    checkHazard(ac_pc.read());

    if ((!ac_wait_sig) && (!ac_annul_sig)) ac_instr_counter+=1;
    ac_annul_sig = 0;
  }
//!Updating Regs for behavioral simulation.
  if(!ac_wait_sig){
    bhv_pc = ac_pc;
  }
  if (ac_stop_flag) {
    return;
  }
  else {
    if (instr_in_batch < instr_batch_size) {
      instr_in_batch++;
    }
    else {
      instr_in_batch = 0;
      wait(1, SC_NS);
    }
  }

} // for (;;)

} // behavior()