void conschk_exists_notu_dlg::InitDialog(wxInitDialogEvent& WXUNUSED(event)) // InitDialog is method of wxWindow
{
//InitDialog() is not virtual, no call needed to a base class
m_bDoAutoFix = FALSE; // default
m_pStatTxtMsg = (wxStaticText*)FindWindowById(ID_TEXT_EXISTS_STR);
wxASSERT(m_pStatTxtMsg != NULL);
wxString itsLabel = m_pStatTxtMsg->GetLabel();
wxString s;
if (m_msgNumber == 1)
{
s = gpApp->m_consCheck_msg1;
}
else
{
s = gpApp->m_consCheck_msg2;
s = s.Format(s, gpApp->m_strNotInKB.c_str());
}
wxString finalLabel;
finalLabel = finalLabel.Format(itsLabel,s.c_str());
m_pStatTxtMsg->SetLabel(finalLabel); // get the appropriate message shown
m_pAutoFixChkBox = (wxCheckBox*)FindWindowById(ID_CHECK_DO_SAME2);
wxASSERT(m_pAutoFixChkBox != NULL);
m_pAutoFixChkBox->SetValue(FALSE); // start with it turned off
actionTaken = no_GUI_needed; // temporary default, OnOK() will set it
m_pTextCtrlSrcText = (wxTextCtrl*)FindWindowById(ID_TEXTCTRL_SOURCE_PHRASE_2);
wxASSERT(m_pTextCtrlSrcText != NULL);
// put the passed in source phrase value into the wxTextCtrl, then make it read only
m_pTextCtrlSrcText->ChangeValue(m_sourcePhrase);
m_pTextCtrlSrcText->SetEditable(FALSE); // now it's read-only
m_pTextCtrlTgtText = (wxTextCtrl*)FindWindowById(ID_TEXTCTRL_TARGET_PHRASE_2);
wxASSERT(m_pTextCtrlTgtText != NULL);
// put the passed in source phrase value into the wxTextCtrl, then make it read only
m_pTextCtrlTgtText->ChangeValue(m_targetPhrase);
m_pTextCtrlTgtText->SetEditable(FALSE); // now it's read-only
m_pStaticCtrl = (wxStaticText*)FindWindowById(ID_TEXT_EXISTS_STR);
wxASSERT(m_pStaticCtrl != NULL);
m_pStoreNormallyRadioBtn = (wxRadioButton*)FindWindowById(ID_RADIO_STORE_NORMALLY);
wxASSERT(m_pStoreNormallyRadioBtn != NULL);
m_pNotInKBRadioBtn = (wxRadioButton*)FindWindowById(ID_RADIO_NOT_IN_KB_LEAVEINDOC);
wxASSERT(m_pNotInKBRadioBtn != NULL);
m_radioNotInKBLabelStr.Empty();
// put in the correct string, for this radio button label; "<Not In KB>"
wxString msg2 = m_pNotInKBRadioBtn->GetLabel();
m_radioNotInKBLabelStr = m_radioNotInKBLabelStr.Format(msg2, m_notInKBStr.c_str());
m_pNotInKBRadioBtn->SetLabel(m_radioNotInKBLabelStr);
// get the pixel difference in the label's changed text
int difference = CalcLabelWidthDifference(msg2, m_radioNotInKBLabelStr, m_pNotInKBRadioBtn);
// make the fonts show user-defined font point size in the dialog
#ifdef _RTL_FLAGS
gpApp->SetFontAndDirectionalityForDialogControl(gpApp->m_pSourceFont, m_pTextCtrlSrcText, NULL,
NULL, NULL, gpApp->m_pDlgSrcFont, gpApp->m_bSrcRTL);
gpApp->SetFontAndDirectionalityForDialogControl(gpApp->m_pTargetFont, m_pTextCtrlTgtText, NULL,
NULL, NULL, gpApp->m_pDlgTgtFont, gpApp->m_bTgtRTL);
#else // Regular version, only LTR scripts supported, so use default FALSE for last parameter
gpApp->SetFontAndDirectionalityForDialogControl(gpApp->m_pSourceFont, m_pTextCtrlSrcText, NULL,
NULL, NULL, gpApp->m_pDlgSrcFont);
gpApp->SetFontAndDirectionalityForDialogControl(gpApp->m_pTargetFont, m_pTextCtrlTgtText, NULL,
NULL, NULL, gpApp->m_pDlgTgtFont);
#endif
// get the dialog to resize to the new label string lengths
int width = 0;
int myheight = 0;
this->GetSize(&width, &myheight);
// use the difference value calculated above to widen the dialog window and then call
// Layout() to get the attached sizer hierarchy recalculated and laid out
int sizeFlags = 0;
sizeFlags |= wxSIZE_USE_EXISTING;
int clientWidth = 0;
int clientHeight = 0;
CMainFrame *pFrame = gpApp->GetMainFrame();
pFrame->GetClientSize(&clientWidth,&clientHeight);
// ensure the adjusted width of the dialog won't exceed the client area's width for the
// frame window
if (difference < clientWidth - width)
{
this->SetSize(wxDefaultCoord, wxDefaultCoord, width + difference, wxDefaultCoord);
}else
{
this->SetSize(wxDefaultCoord, wxDefaultCoord, clientWidth - 2, wxDefaultCoord);
}
this->Layout(); // automatically calls Layout() on top level sizer
if (m_bShowItCentered)
{
this->Centre(wxHORIZONTAL);
}
{ // reused local var names here, so need a new scope in order to hide them
// get the dialog to resize to the new label string lengths
int width = 0;
int myheight = 0;
this->GetSize(&width, &myheight);
// use the difference value calculated above to widen the dialog window and then call
// Layout() to get the attached sizer hierarchy recalculated and laid out
int sizeFlags = 0;
sizeFlags |= wxSIZE_USE_EXISTING;
int clientWidth = 0;
int clientHeight = 0;
CMainFrame *pFrame = gpApp->GetMainFrame();
pFrame->GetClientSize(&clientWidth,&clientHeight);
// ensure the adjusted width of the dialog won't exceed the client area's width for the
// frame window
if (difference < clientWidth - width)
{
this->SetSize(wxDefaultCoord, wxDefaultCoord, width + difference, wxDefaultCoord);
}else
{
this->SetSize(wxDefaultCoord, wxDefaultCoord, clientWidth - 2, wxDefaultCoord);
}
this->Layout(); // automatically calls Layout() on top level sizer
if (m_bShowItCentered)
{
this->Centre(wxHORIZONTAL);
}
// work out where to place the dialog window
int myTopCoord, myLeftCoord, newXPos, newYPos;
wxRect rectDlg;
GetSize(&rectDlg.width, &rectDlg.height); // dialog's window frame
wxClientDC dc(gpApp->GetMainFrame()->canvas);
gpApp->GetMainFrame()->canvas->DoPrepareDC(dc);// adjust origin
// wxWidgets' drawing.cpp sample calls PrepareDC on the owning frame
gpApp->GetMainFrame()->PrepareDC(dc);
// CalcScrolledPosition translates logical coordinates to device ones, m_ptBoxTopLeft
// has been initialized to the topleft of the cell (from m_pActivePile) where the
// phrase box currently is
gpApp->GetMainFrame()->canvas->CalcScrolledPosition(m_ptBoxTopLeft.x, m_ptBoxTopLeft.y,&newXPos,&newYPos);
gpApp->GetMainFrame()->canvas->ClientToScreen(&newXPos, &newYPos); // now it's screen coords
RepositionDialogToUncoverPhraseBox(gpApp, 0, 0, rectDlg.width, rectDlg.height,
newXPos, newYPos, myTopCoord, myLeftCoord);
SetSize(myLeftCoord, myTopCoord, wxDefaultCoord, wxDefaultCoord, wxSIZE_USE_EXISTING);
}
// It's a simple dialog, I'm not bothering with validators and TransferDataTo/FromWindow calls
//TransferDataToWindow();
}
