void QgsMapToolAddPart::cadCanvasReleaseEvent( QgsMapMouseEvent *e )
{
//check if we operate on a vector layer
QgsVectorLayer *vlayer = currentVectorLayer();
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
bool isGeometryEmpty = false;
QgsFeatureList selectedFeatures = vlayer->selectedFeatures();
if ( !selectedFeatures.isEmpty() && selectedFeatures.at( 0 ).geometry().isNull() )
isGeometryEmpty = true;
if ( !checkSelection() )
{
stopCapturing();
return;
}
int errorCode = 0;
switch ( mode() )
{
case CapturePoint:
{
QgsPoint layerPoint;
QgsPointXY mapPoint = e->mapPoint();
if ( nextPoint( QgsPoint( mapPoint ), layerPoint ) != 0 )
{
QgsDebugMsg( "nextPoint failed" );
return;
}
vlayer->beginEditCommand( tr( "Part added" ) );
errorCode = vlayer->addPart( QgsPointSequence() << layerPoint );
}
break;
case CaptureLine:
case CapturePolygon:
{
//add point to list and to rubber band
if ( e->button() == Qt::LeftButton )
{
int error = addVertex( e->mapPoint(), e->mapPointMatch() );
if ( error == 1 )
{
QgsDebugMsg( "current layer is not a vector layer" );
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
emit messageEmitted( tr( "Coordinate transform error. Cannot transform the point to the layers coordinate system" ), Qgis::Warning );
return;
}
startCapturing();
return;
}
else if ( e->button() != Qt::RightButton )
{
deleteTempRubberBand();
return;
}
if ( !isCapturing() )
return;
if ( mode() == CapturePolygon )
{
closePolygon();
}
//does compoundcurve contain circular strings?
//does provider support circular strings?
bool hasCurvedSegments = captureCurve()->hasCurvedSegments();
bool providerSupportsCurvedSegments = vlayer->dataProvider()->capabilities() & QgsVectorDataProvider::CircularGeometries;
QgsCurve *curveToAdd = nullptr;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
curveToAdd = captureCurve()->clone();
}
else
{
curveToAdd = captureCurve()->curveToLine();
}
vlayer->beginEditCommand( tr( "Part added" ) );
if ( mode() == CapturePolygon )
{
//avoid intersections
QgsCurvePolygon *cp = new QgsCurvePolygon();
cp->setExteriorRing( curveToAdd );
QgsGeometry *geom = new QgsGeometry( cp );
geom->avoidIntersections( QgsProject::instance()->avoidIntersectionsLayers() );
const QgsCurvePolygon *cpGeom = qgsgeometry_cast<const QgsCurvePolygon *>( geom->constGet() );
if ( !cpGeom )
{
stopCapturing();
delete geom;
vlayer->destroyEditCommand();
return;
}
errorCode = vlayer->addPart( cpGeom->exteriorRing()->clone() );
delete geom;
}
else
{
errorCode = vlayer->addPart( curveToAdd );
}
stopCapturing();
}
break;
default:
Q_ASSERT( !"invalid capture mode" );
errorCode = 6;
break;
}
QString errorMessage;
switch ( errorCode )
{
case 0:
{
// remove previous message
emit messageDiscarded();
//add points to other features to keep topology up-to-date
bool topologicalEditing = QgsProject::instance()->topologicalEditing();
if ( topologicalEditing )
{
addTopologicalPoints( points() );
}
vlayer->endEditCommand();
vlayer->triggerRepaint();
if ( ( !isGeometryEmpty ) && QgsWkbTypes::isSingleType( vlayer->wkbType() ) )
{
emit messageEmitted( tr( "Add part: Feature geom is single part and you've added more than one" ), Qgis::Warning );
}
return;
}
case 1:
errorMessage = tr( "Selected feature is not multi part." );
break;
case 2:
errorMessage = tr( "New part's geometry is not valid." );
break;
case 3:
errorMessage = tr( "New polygon ring not disjoint with existing polygons." );
break;
case 4:
errorMessage = tr( "No feature selected. Please select a feature with the selection tool or in the attribute table" );
break;
case 5:
errorMessage = tr( "Several features are selected. Please select only one feature to which an island should be added." );
break;
case 6:
errorMessage = tr( "Selected geometry could not be found" );
break;
}
emit messageEmitted( errorMessage, Qgis::Warning );
vlayer->destroyEditCommand();
}
void QgsMapToolDigitizeFeature::cadCanvasReleaseEvent( QgsMapMouseEvent *e )
{
QgsVectorLayer *vlayer = qobject_cast<QgsVectorLayer *>( mLayer );
if ( !vlayer )
//if no given layer take the current from canvas
vlayer = currentVectorLayer();
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
QgsWkbTypes::Type layerWKBType = vlayer->wkbType();
QgsVectorDataProvider *provider = vlayer->dataProvider();
if ( !( provider->capabilities() & QgsVectorDataProvider::AddFeatures ) )
{
emit messageEmitted( tr( "The data provider for this layer does not support the addition of features." ), Qgis::Warning );
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
// POINT CAPTURING
if ( mode() == CapturePoint )
{
if ( e->button() != Qt::LeftButton )
return;
//check we only use this tool for point/multipoint layers
if ( vlayer->geometryType() != QgsWkbTypes::PointGeometry && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture point' tool on this vector layer" ), Qgis::Warning );
return;
}
QgsPointXY savePoint; //point in layer coordinates
try
{
QgsPoint fetchPoint;
int res;
res = fetchLayerPoint( e->mapPointMatch(), fetchPoint );
if ( res == 0 )
{
savePoint = QgsPointXY( fetchPoint.x(), fetchPoint.y() );
}
else
{
savePoint = toLayerCoordinates( vlayer, e->mapPoint() );
}
QgsDebugMsg( "savePoint = " + savePoint.toString() );
}
catch ( QgsCsException &cse )
{
Q_UNUSED( cse );
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), Qgis::Warning );
return;
}
//only do the rest for provider with feature addition support
//note that for the grass provider, this will return false since
//grass provider has its own mechanism of feature addition
if ( provider->capabilities() & QgsVectorDataProvider::AddFeatures )
{
QgsFeature f( vlayer->fields(), 0 );
QgsGeometry g;
if ( layerWKBType == QgsWkbTypes::Point )
{
g = QgsGeometry::fromPointXY( savePoint );
}
else if ( !QgsWkbTypes::isMultiType( layerWKBType ) && QgsWkbTypes::hasZ( layerWKBType ) )
{
g = QgsGeometry( new QgsPoint( QgsWkbTypes::PointZ, savePoint.x(), savePoint.y(), defaultZValue() ) );
}
else if ( QgsWkbTypes::isMultiType( layerWKBType ) && !QgsWkbTypes::hasZ( layerWKBType ) )
{
g = QgsGeometry::fromMultiPointXY( QgsMultiPointXY() << savePoint );
}
else if ( QgsWkbTypes::isMultiType( layerWKBType ) && QgsWkbTypes::hasZ( layerWKBType ) )
{
QgsMultiPoint *mp = new QgsMultiPoint();
mp->addGeometry( new QgsPoint( QgsWkbTypes::PointZ, savePoint.x(), savePoint.y(), defaultZValue() ) );
g = QgsGeometry( mp );
}
else
{
// if layer supports more types (mCheckGeometryType is false)
g = QgsGeometry::fromPointXY( savePoint );
}
if ( QgsWkbTypes::hasM( layerWKBType ) )
{
g.get()->addMValue();
}
f.setGeometry( g );
f.setValid( true );
digitized( f );
// we are done with digitizing for now so instruct advanced digitizing dock to reset its CAD points
cadDockWidget()->clearPoints();
}
}
// LINE AND POLYGON CAPTURING
else if ( mode() == CaptureLine || mode() == CapturePolygon )
{
//check we only use the line tool for line/multiline layers
if ( mode() == CaptureLine && vlayer->geometryType() != QgsWkbTypes::LineGeometry && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture line' tool on this vector layer" ), Qgis::Warning );
return;
}
//check we only use the polygon tool for polygon/multipolygon layers
if ( mode() == CapturePolygon && vlayer->geometryType() != QgsWkbTypes::PolygonGeometry && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture polygon' tool on this vector layer" ), Qgis::Warning );
return;
}
//add point to list and to rubber band
if ( e->button() == Qt::LeftButton )
{
int error = addVertex( e->mapPoint(), e->mapPointMatch() );
if ( error == 1 )
{
//current layer is not a vector layer
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), Qgis::Warning );
return;
}
startCapturing();
}
else if ( e->button() == Qt::RightButton )
{
// End of string
deleteTempRubberBand();
//lines: bail out if there are not at least two vertices
if ( mode() == CaptureLine && size() < 2 )
{
stopCapturing();
return;
}
//polygons: bail out if there are not at least two vertices
if ( mode() == CapturePolygon && size() < 3 )
{
stopCapturing();
return;
}
if ( mode() == CapturePolygon )
{
closePolygon();
}
//create QgsFeature with wkb representation
std::unique_ptr< QgsFeature > f( new QgsFeature( vlayer->fields(), 0 ) );
//does compoundcurve contain circular strings?
//does provider support circular strings?
bool hasCurvedSegments = captureCurve()->hasCurvedSegments();
bool providerSupportsCurvedSegments = vlayer->dataProvider()->capabilities() & QgsVectorDataProvider::CircularGeometries;
QList<QgsPointLocator::Match> snappingMatchesList;
QgsCurve *curveToAdd = nullptr;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
curveToAdd = captureCurve()->clone();
}
else
{
curveToAdd = captureCurve()->curveToLine();
snappingMatchesList = snappingMatches();
}
if ( mode() == CaptureLine )
{
QgsGeometry g( curveToAdd );
f->setGeometry( g );
}
else
{
QgsCurvePolygon *poly = nullptr;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
poly = new QgsCurvePolygon();
}
else
{
poly = new QgsPolygon();
}
poly->setExteriorRing( curveToAdd );
QgsGeometry g( poly );
f->setGeometry( g );
QgsGeometry featGeom = f->geometry();
int avoidIntersectionsReturn = featGeom.avoidIntersections( QgsProject::instance()->avoidIntersectionsLayers() );
f->setGeometry( featGeom );
if ( avoidIntersectionsReturn == 1 )
{
//not a polygon type. Impossible to get there
}
if ( f->geometry().isEmpty() ) //avoid intersection might have removed the whole geometry
{
emit messageEmitted( tr( "The feature cannot be added because it's geometry collapsed due to intersection avoidance" ), Qgis::Critical );
stopCapturing();
return;
}
}
f->setValid( true );
digitized( *f );
stopCapturing();
}
}
}
void QgsMapToolAddPart::canvasReleaseEvent( QMouseEvent * e )
{
//check if we operate on a vector layer
QgsVectorLayer *vlayer = qobject_cast<QgsVectorLayer *>( mCanvas->currentLayer() );
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
//inform user at the begin of the digitising action that the island tool only works if exactly one feature is selected
int nSelectedFeatures = vlayer->selectedFeatureCount();
QString selectionErrorMsg;
if ( nSelectedFeatures < 1 )
{
selectionErrorMsg = tr( "No feature selected. Please select a feature with the selection tool or in the attribute table" );
}
else if ( nSelectedFeatures > 1 )
{
selectionErrorMsg = tr( "Several features are selected. Please select only one feature to which an part should be added." );
}
if ( !selectionErrorMsg.isEmpty() )
{
QMessageBox::critical( 0, tr( "Error. Could not add part." ), selectionErrorMsg );
stopCapturing();
return;
}
int errorCode;
switch ( mode() )
{
case CapturePoint:
{
QgsPoint layerPoint;
QgsPoint mapPoint;
if ( nextPoint( e->pos(), layerPoint, mapPoint ) != 0 )
{
QgsDebugMsg( "nextPoint failed" );
return;
}
vlayer->beginEditCommand( tr( "Part added" ) );
errorCode = vlayer->addPart( QList<QgsPoint>() << layerPoint );
}
break;
case CaptureLine:
case CapturePolygon:
{
//add point to list and to rubber band
if ( e->button() == Qt::LeftButton )
{
int error = addVertex( e->pos() );
if ( error == 1 )
{
QgsDebugMsg( "current layer is not a vector layer" );
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
QMessageBox::information( 0,
tr( "Coordinate transform error" ),
tr( "Cannot transform the point to the layers coordinate system" ) );
return;
}
startCapturing();
return;
}
else if ( e->button() != Qt::RightButton )
{
deleteTempRubberBand();
return;
}
if ( mode() == CapturePolygon )
{
//close polygon
closePolygon();
//avoid intersections
QgsGeometry* geom = QgsGeometry::fromPolygon( QgsPolygon() << points().toVector() );
if ( geom )
{
geom->avoidIntersections();
QgsPolygon poly = geom->asPolygon();
if ( poly.size() < 1 )
{
stopCapturing();
delete geom;
vlayer->destroyEditCommand();
return;
}
setPoints( geom->asPolygon()[0].toList() );
delete geom;
}
}
vlayer->beginEditCommand( tr( "Part added" ) );
errorCode = vlayer->addPart( points() );
stopCapturing();
}
break;
default:
Q_ASSERT( !"invalid capture mode" );
errorCode = 6;
break;
}
QString errorMessage;
switch ( errorCode )
{
case 0:
{
//add points to other features to keep topology up-to-date
int topologicalEditing = QgsProject::instance()->readNumEntry( "Digitizing", "/TopologicalEditing", 0 );
if ( topologicalEditing )
{
addTopologicalPoints( points() );
}
vlayer->endEditCommand();
mCanvas->refresh();
return;
}
case 1:
errorMessage = tr( "Selected feature is not multi part." );
break;
case 2:
errorMessage = tr( "New part's geometry is not valid." );
break;
case 3:
errorMessage = tr( "New polygon ring not disjoint with existing polygons." );
break;
case 4:
errorMessage = tr( "No feature selected. Please select a feature with the selection tool or in the attribute table" );
break;
case 5:
errorMessage = tr( "Several features are selected. Please select only one feature to which an island should be added." );
break;
case 6:
errorMessage = tr( "Selected geometry could not be found" );
break;
}
QMessageBox::critical( 0, tr( "Error, could not add part" ), errorMessage );
vlayer->destroyEditCommand();
}
void QgsMapToolReshape::reshape( QgsVectorLayer *vlayer )
{
QgsPointXY firstPoint = points().at( 0 );
QgsRectangle bbox( firstPoint.x(), firstPoint.y(), firstPoint.x(), firstPoint.y() );
for ( int i = 1; i < size(); ++i )
{
bbox.combineExtentWith( points().at( i ).x(), points().at( i ).y() );
}
QgsLineString reshapeLineString( points() );
if ( QgsWkbTypes::hasZ( vlayer->wkbType() ) )
reshapeLineString.addZValue( defaultZValue() );
//query all the features that intersect bounding box of capture line
QgsFeatureIterator fit = vlayer->getFeatures( QgsFeatureRequest().setFilterRect( bbox ).setSubsetOfAttributes( QgsAttributeList() ) );
QgsFeature f;
int reshapeReturn;
bool reshapeDone = false;
bool isBinding = isBindingLine( vlayer, bbox );
vlayer->beginEditCommand( tr( "Reshape" ) );
while ( fit.nextFeature( f ) )
{
//query geometry
//call geometry->reshape(mCaptureList)
//register changed geometry in vector layer
QgsGeometry geom = f.geometry();
if ( !geom.isNull() )
{
// in case of a binding line, we just want to update the line from
// the starting point and not both side
if ( isBinding && !geom.asPolyline().contains( points().first() ) )
continue;
reshapeReturn = geom.reshapeGeometry( reshapeLineString );
if ( reshapeReturn == 0 )
{
//avoid intersections on polygon layers
if ( vlayer->geometryType() == QgsWkbTypes::PolygonGeometry )
{
//ignore all current layer features as they should be reshaped too
QHash<QgsVectorLayer *, QSet<QgsFeatureId> > ignoreFeatures;
ignoreFeatures.insert( vlayer, vlayer->allFeatureIds() );
if ( geom.avoidIntersections( QgsProject::instance()->avoidIntersectionsLayers(), ignoreFeatures ) != 0 )
{
emit messageEmitted( tr( "An error was reported during intersection removal" ), Qgis::Critical );
vlayer->destroyEditCommand();
stopCapturing();
return;
}
if ( geom.isEmpty() ) //intersection removal might have removed the whole geometry
{
emit messageEmitted( tr( "The feature cannot be reshaped because the resulting geometry is empty" ), Qgis::Critical );
vlayer->destroyEditCommand();
return;
}
}
vlayer->changeGeometry( f.id(), geom );
reshapeDone = true;
}
}
}
if ( reshapeDone )
{
vlayer->endEditCommand();
}
else
{
vlayer->destroyEditCommand();
}
}
void QgsMapToolAddFeature::cadCanvasReleaseEvent( QgsMapMouseEvent* e )
{
QgsVectorLayer* vlayer = currentVectorLayer();
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
QgsWkbTypes::Type layerWKBType = vlayer->wkbType();
QgsVectorDataProvider* provider = vlayer->dataProvider();
if ( !( provider->capabilities() & QgsVectorDataProvider::AddFeatures ) )
{
emit messageEmitted( tr( "The data provider for this layer does not support the addition of features." ), QgsMessageBar::WARNING );
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
// POINT CAPTURING
if ( mode() == CapturePoint )
{
if ( e->button() != Qt::LeftButton )
return;
//check we only use this tool for point/multipoint layers
if ( vlayer->geometryType() != QgsWkbTypes::PointGeometry && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture point' tool on this vector layer" ), QgsMessageBar::WARNING );
return;
}
QgsPoint savePoint; //point in layer coordinates
try
{
QgsPointV2 fetchPoint;
int res;
res = fetchLayerPoint( e->mapPointMatch(), fetchPoint );
if ( res == 0 )
{
savePoint = QgsPoint( fetchPoint.x(), fetchPoint.y() );
}
else
{
savePoint = toLayerCoordinates( vlayer, e->mapPoint() );
}
QgsDebugMsg( "savePoint = " + savePoint.toString() );
}
catch ( QgsCsException &cse )
{
Q_UNUSED( cse );
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), QgsMessageBar::WARNING );
return;
}
//only do the rest for provider with feature addition support
//note that for the grass provider, this will return false since
//grass provider has its own mechanism of feature addition
if ( provider->capabilities() & QgsVectorDataProvider::AddFeatures )
{
QgsFeature f( vlayer->fields(), 0 );
QgsGeometry g;
if ( layerWKBType == QgsWkbTypes::Point )
{
g = QgsGeometry::fromPoint( savePoint );
}
else if ( layerWKBType == QgsWkbTypes::Point25D )
{
g = QgsGeometry( new QgsPointV2( QgsWkbTypes::PointZ, savePoint.x(), savePoint.y(), 0.0 ) );
}
else if ( layerWKBType == QgsWkbTypes::MultiPoint )
{
g = QgsGeometry::fromMultiPoint( QgsMultiPoint() << savePoint );
}
else if ( layerWKBType == QgsWkbTypes::MultiPoint25D )
{
QgsMultiPointV2* mp = new QgsMultiPointV2();
mp->addGeometry( new QgsPointV2( QgsWkbTypes::PointZ, savePoint.x(), savePoint.y(), 0.0 ) );
g = QgsGeometry( mp );
}
else
{
// if layer supports more types (mCheckGeometryType is false)
g = QgsGeometry::fromPoint( savePoint );
}
f.setGeometry( g );
f.setValid( true );
addFeature( vlayer, &f, false );
vlayer->triggerRepaint();
}
}
// LINE AND POLYGON CAPTURING
else if ( mode() == CaptureLine || mode() == CapturePolygon )
{
//check we only use the line tool for line/multiline layers
if ( mode() == CaptureLine && vlayer->geometryType() != QgsWkbTypes::LineGeometry && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture line' tool on this vector layer" ), QgsMessageBar::WARNING );
return;
}
//check we only use the polygon tool for polygon/multipolygon layers
if ( mode() == CapturePolygon && vlayer->geometryType() != QgsWkbTypes::PolygonGeometry && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture polygon' tool on this vector layer" ), QgsMessageBar::WARNING );
return;
}
//add point to list and to rubber band
if ( e->button() == Qt::LeftButton )
{
int error = addVertex( e->mapPoint(), e->mapPointMatch() );
if ( error == 1 )
{
//current layer is not a vector layer
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), QgsMessageBar::WARNING );
return;
}
startCapturing();
}
else if ( e->button() == Qt::RightButton )
{
// End of string
deleteTempRubberBand();
//lines: bail out if there are not at least two vertices
if ( mode() == CaptureLine && size() < 2 )
{
stopCapturing();
return;
}
//polygons: bail out if there are not at least two vertices
if ( mode() == CapturePolygon && size() < 3 )
{
stopCapturing();
return;
}
if ( mode() == CapturePolygon )
{
closePolygon();
}
//create QgsFeature with wkb representation
QScopedPointer< QgsFeature > f( new QgsFeature( vlayer->fields(), 0 ) );
//does compoundcurve contain circular strings?
//does provider support circular strings?
bool hasCurvedSegments = captureCurve()->hasCurvedSegments();
bool providerSupportsCurvedSegments = vlayer->dataProvider()->capabilities() & QgsVectorDataProvider::CircularGeometries;
QgsCurve* curveToAdd = nullptr;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
curveToAdd = captureCurve()->clone();
}
else
{
curveToAdd = captureCurve()->curveToLine();
}
if ( mode() == CaptureLine )
{
QgsGeometry* g = new QgsGeometry( curveToAdd );
f->setGeometry( *g );
delete g;
}
else
{
QgsCurvePolygon* poly = nullptr;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
poly = new QgsCurvePolygon();
}
else
{
poly = new QgsPolygonV2();
}
poly->setExteriorRing( curveToAdd );
QgsGeometry* g = new QgsGeometry( poly );
f->setGeometry( *g );
delete g;
QgsGeometry featGeom = f->geometry();
int avoidIntersectionsReturn = featGeom.avoidIntersections();
f->setGeometry( featGeom );
if ( avoidIntersectionsReturn == 1 )
{
//not a polygon type. Impossible to get there
}
if ( f->geometry().isGeosEmpty() ) //avoid intersection might have removed the whole geometry
{
emit messageEmitted( tr( "The feature cannot be added because it's geometry collapsed due to intersection avoidance" ), QgsMessageBar::CRITICAL );
stopCapturing();
return;
}
}
f->setValid( true );
if ( addFeature( vlayer, f.data(), false ) )
{
//add points to other features to keep topology up-to-date
int topologicalEditing = QgsProject::instance()->readNumEntry( "Digitizing", "/TopologicalEditing", 0 );
//use always topological editing for avoidIntersection.
//Otherwise, no way to guarantee the geometries don't have a small gap in between.
QStringList intersectionLayers = QgsProject::instance()->readListEntry( "Digitizing", "/AvoidIntersectionsList" );
bool avoidIntersection = !intersectionLayers.isEmpty();
if ( avoidIntersection ) //try to add topological points also to background layers
{
QStringList::const_iterator lIt = intersectionLayers.constBegin();
for ( ; lIt != intersectionLayers.constEnd(); ++lIt )
{
QgsMapLayer* ml = QgsMapLayerRegistry::instance()->mapLayer( *lIt );
QgsVectorLayer* vl = qobject_cast<QgsVectorLayer*>( ml );
//can only add topological points if background layer is editable...
if ( vl && vl->geometryType() == QgsWkbTypes::PolygonGeometry && vl->isEditable() )
{
vl->addTopologicalPoints( f->geometry() );
}
}
}
else if ( topologicalEditing )
{
vlayer->addTopologicalPoints( f->geometry() );
}
}
stopCapturing();
}
}
}
void QgsMapToolReshape::cadCanvasReleaseEvent( QgsMapMouseEvent * e )
{
//check if we operate on a vector layer //todo: move this to a function in parent class to avoid duplication
QgsVectorLayer *vlayer = qobject_cast<QgsVectorLayer *>( mCanvas->currentLayer() );
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
//add point to list and to rubber band
if ( e->button() == Qt::LeftButton )
{
int error = addVertex( e->mapPoint(), e->mapPointMatch() );
if ( error == 1 )
{
//current layer is not a vector layer
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), QgsMessageBar::WARNING );
return;
}
startCapturing();
}
else if ( e->button() == Qt::RightButton )
{
deleteTempRubberBand();
//find out bounding box of mCaptureList
if ( size() < 1 )
{
stopCapturing();
return;
}
QgsPoint firstPoint = points().at( 0 );
QgsRectangle bbox( firstPoint.x(), firstPoint.y(), firstPoint.x(), firstPoint.y() );
for ( int i = 1; i < size(); ++i )
{
bbox.combineExtentWith( points().at( i ).x(), points().at( i ).y() );
}
//query all the features that intersect bounding box of capture line
QgsFeatureIterator fit = vlayer->getFeatures( QgsFeatureRequest().setFilterRect( bbox ).setSubsetOfAttributes( QgsAttributeList() ) );
QgsFeature f;
int reshapeReturn;
bool reshapeDone = false;
vlayer->beginEditCommand( tr( "Reshape" ) );
while ( fit.nextFeature( f ) )
{
//query geometry
//call geometry->reshape(mCaptureList)
//register changed geometry in vector layer
QgsGeometry* geom = f.geometry();
if ( geom )
{
reshapeReturn = geom->reshapeGeometry( points() );
if ( reshapeReturn == 0 )
{
//avoid intersections on polygon layers
if ( vlayer->geometryType() == QGis::Polygon )
{
//ignore all current layer features as they should be reshaped too
QMap<QgsVectorLayer*, QSet<QgsFeatureId> > ignoreFeatures;
ignoreFeatures.insert( vlayer, vlayer->allFeatureIds() );
if ( geom->avoidIntersections( ignoreFeatures ) != 0 )
{
emit messageEmitted( tr( "An error was reported during intersection removal" ), QgsMessageBar::CRITICAL );
vlayer->destroyEditCommand();
stopCapturing();
return;
}
if ( geom->isGeosEmpty() ) //intersection removal might have removed the whole geometry
{
emit messageEmitted( tr( "The feature cannot be reshaped because the resulting geometry is empty" ), QgsMessageBar::CRITICAL );
vlayer->destroyEditCommand();
stopCapturing();
return;
}
}
vlayer->changeGeometry( f.id(), geom );
reshapeDone = true;
}
}
}
if ( reshapeDone )
{
vlayer->endEditCommand();
}
else
{
vlayer->destroyEditCommand();
}
stopCapturing();
}
}
