static TError AddSegmentsToMesh(netgen::Mesh& ngMesh,
OCCGeometry& geom,
const TSideVector& wires,
SMESH_MesherHelper& helper,
vector< const SMDS_MeshNode* > & nodeVec)
{
// ----------------------------
// Check wires and count nodes
// ----------------------------
int nbNodes = 0;
for ( int iW = 0; iW < wires.size(); ++iW )
{
StdMeshers_FaceSidePtr wire = wires[ iW ];
if ( wire->MissVertexNode() )
return TError
(new SMESH_ComputeError(COMPERR_BAD_INPUT_MESH, "Missing nodes on vertices"));
const vector<UVPtStruct>& uvPtVec = wire->GetUVPtStruct();
if ( uvPtVec.size() != wire->NbPoints() )
return TError
(new SMESH_ComputeError(COMPERR_BAD_INPUT_MESH,
SMESH_Comment("Unexpected nb of points on wire ") << iW
<< ": " << uvPtVec.size()<<" != "<<wire->NbPoints()));
nbNodes += wire->NbSegments();
}
nodeVec.reserve( nbNodes );
// -----------------
// Fill netgen mesh
// -----------------
// netgen::Box<3> bb = geom.GetBoundingBox();
// bb.Increase (bb.Diam()/10);
// ngMesh.SetLocalH (bb.PMin(), bb.PMax(), 0.5); // set grading
const int faceID = 1, solidID = 0;
ngMesh.AddFaceDescriptor (FaceDescriptor(faceID, solidID, solidID, 0));
for ( int iW = 0; iW < wires.size(); ++iW )
{
StdMeshers_FaceSidePtr wire = wires[ iW ];
const vector<UVPtStruct>& uvPtVec = wire->GetUVPtStruct();
int firstPointID = ngMesh.GetNP() + 1;
int edgeID = 1, posID = -2;
for ( int i = 0; i < wire->NbSegments(); ++i ) // loop on segments
{
// Add the first point of a segment
const SMDS_MeshNode * n = uvPtVec[ i ].node;
const int posShapeID = n->GetPosition()->GetShapeId();
// skip nodes on degenerated edges
if ( helper.IsDegenShape( posShapeID ) &&
helper.IsDegenShape( uvPtVec[ i+1 ].node->GetPosition()->GetShapeId() ))
continue;
nodeVec.push_back( n );
MeshPoint mp( Point<3> (n->X(), n->Y(), n->Z()) );
ngMesh.AddPoint ( mp, 1, EDGEPOINT );
// Add the segment
Segment seg;
seg.pnums[0] = ngMesh.GetNP(); // ng node id
seg.pnums[1] = seg.pnums[0] + 1; // ng node id
seg.edgenr = ngMesh.GetNSeg() + 1;// segment id
seg.si = faceID; // = geom.fmap.FindIndex (face);
for ( int iEnd = 0; iEnd < 2; ++iEnd)
{
const UVPtStruct& pnt = uvPtVec[ i + iEnd ];
seg.epgeominfo[ iEnd ].dist = pnt.param; // param on curve
seg.epgeominfo[ iEnd ].u = pnt.u;
seg.epgeominfo[ iEnd ].v = pnt.v;
// find out edge id and node parameter on edge
bool onVertex = ( pnt.node->GetPosition()->GetTypeOfPosition() == SMDS_TOP_VERTEX );
if ( onVertex || posShapeID != posID )
{
// get edge id
double normParam = pnt.normParam;
if ( onVertex )
normParam = 0.5 * ( uvPtVec[ i ].normParam + uvPtVec[ i+1 ].normParam );
const TopoDS_Edge& edge = wire->Edge( wire->EdgeIndex( normParam ));
edgeID = geom.emap.FindIndex( edge );
posID = posShapeID;
if ( onVertex ) // param on curve is different on each of two edges
seg.epgeominfo[ iEnd ].dist = helper.GetNodeU( edge, pnt.node );
}
seg.epgeominfo[ iEnd ].edgenr = edgeID; // = geom.emap.FindIndex(edge);
}
ngMesh.AddSegment (seg);
// cout << "Segment: " << seg.edgenr << endl
// << "\tp1: " << seg.p1 << endl
// << "\tp2: " << seg.p2 << endl
// << "\tp0 param: " << seg.epgeominfo[ 0 ].dist << endl
// << "\tp0 uv: " << seg.epgeominfo[ 0 ].u <<", "<< seg.epgeominfo[ 0 ].v << endl
// << "\tp0 edge: " << seg.epgeominfo[ 0 ].edgenr << endl
// << "\tp1 param: " << seg.epgeominfo[ 1 ].dist << endl
// << "\tp1 uv: " << seg.epgeominfo[ 1 ].u <<", "<< seg.epgeominfo[ 1 ].v << endl
// << "\tp1 edge: " << seg.epgeominfo[ 1 ].edgenr << endl;
}
Segment& seg = ngMesh.LineSegment( ngMesh.GetNSeg() );
seg.pnums[1] = firstPointID;
}
ngMesh.CalcSurfacesOfNode();
return TError();
}
bool NETGENPlugin_NETGEN_2D_ONLY::Compute(SMESH_Mesh& aMesh,
const TopoDS_Shape& aShape)
{
netgen::multithread.terminate = 0;
//netgen::multithread.task = "Surface meshing";
SMESHDS_Mesh* meshDS = aMesh.GetMeshDS();
SMESH_MesherHelper helper(aMesh);
helper.SetElementsOnShape( true );
NETGENPlugin_NetgenLibWrapper ngLib;
ngLib._isComputeOk = false;
netgen::Mesh ngMeshNoLocSize;
#if NETGEN_VERSION < 6
netgen::Mesh * ngMeshes[2] = { (netgen::Mesh*) ngLib._ngMesh, & ngMeshNoLocSize };
#else
netgen::Mesh * ngMeshes[2] = { (netgen::Mesh*) ngLib._ngMesh.get(), & ngMeshNoLocSize };
#endif
netgen::OCCGeometry occgeoComm;
// min / max sizes are set as follows:
// if ( _hypParameters )
// min and max are defined by the user
// else if ( _hypLengthFromEdges )
// min = aMesher.GetDefaultMinSize()
// max = average segment len of a FACE
// else if ( _hypMaxElementArea )
// min = aMesher.GetDefaultMinSize()
// max = f( _hypMaxElementArea )
// else
// min = aMesher.GetDefaultMinSize()
// max = max segment len of a FACE
NETGENPlugin_Mesher aMesher( &aMesh, aShape, /*isVolume=*/false);
aMesher.SetParameters( _hypParameters ); // _hypParameters -> netgen::mparam
const bool toOptimize = _hypParameters ? _hypParameters->GetOptimize() : true;
if ( _hypMaxElementArea )
{
netgen::mparam.maxh = sqrt( 2. * _hypMaxElementArea->GetMaxArea() / sqrt(3.0) );
}
if ( _hypQuadranglePreference )
netgen::mparam.quad = true;
// local size is common for all FACEs in aShape?
const bool isCommonLocalSize = ( !_hypLengthFromEdges && !_hypMaxElementArea && netgen::mparam.uselocalh );
const bool isDefaultHyp = ( !_hypLengthFromEdges && !_hypMaxElementArea && !_hypParameters );
if ( isCommonLocalSize ) // compute common local size in ngMeshes[0]
{
//list< SMESH_subMesh* > meshedSM[4]; --> all sub-shapes are added to occgeoComm
aMesher.PrepareOCCgeometry( occgeoComm, aShape, aMesh );//, meshedSM );
// local size set at MESHCONST_ANALYSE step depends on
// minh, face_maxh, grading and curvaturesafety; find minh if not set by the user
if ( !_hypParameters || netgen::mparam.minh < DBL_MIN )
{
if ( !_hypParameters )
netgen::mparam.maxh = occgeoComm.GetBoundingBox().Diam() / 3.;
netgen::mparam.minh = aMesher.GetDefaultMinSize( aShape, netgen::mparam.maxh );
}
// set local size depending on curvature and NOT closeness of EDGEs
netgen::occparam.resthcloseedgeenable = false;
//netgen::occparam.resthcloseedgefac = 1.0 + netgen::mparam.grading;
occgeoComm.face_maxh = netgen::mparam.maxh;
netgen::OCCSetLocalMeshSize( occgeoComm, *ngMeshes[0] );
occgeoComm.emap.Clear();
occgeoComm.vmap.Clear();
// set local size according to size of existing segments
const double factor = netgen::occparam.resthcloseedgefac;
TopTools_IndexedMapOfShape edgeMap;
TopExp::MapShapes( aMesh.GetShapeToMesh(), TopAbs_EDGE, edgeMap );
for ( int iE = 1; iE <= edgeMap.Extent(); ++iE )
{
const TopoDS_Shape& edge = edgeMap( iE );
if ( SMESH_Algo::isDegenerated( TopoDS::Edge( edge ))/* ||
helper.IsSubShape( edge, aShape )*/)
continue;
SMESHDS_SubMesh* smDS = meshDS->MeshElements( edge );
if ( !smDS ) continue;
SMDS_ElemIteratorPtr segIt = smDS->GetElements();
while ( segIt->more() )
{
const SMDS_MeshElement* seg = segIt->next();
SMESH_TNodeXYZ n1 = seg->GetNode(0);
SMESH_TNodeXYZ n2 = seg->GetNode(1);
gp_XYZ p = 0.5 * ( n1 + n2 );
netgen::Point3d pi(p.X(), p.Y(), p.Z());
ngMeshes[0]->RestrictLocalH( pi, factor * ( n1 - n2 ).Modulus() );
}
}
}
netgen::mparam.uselocalh = toOptimize; // restore as it is used at surface optimization
// ==================
// Loop on all FACEs
// ==================
vector< const SMDS_MeshNode* > nodeVec;
TopExp_Explorer fExp( aShape, TopAbs_FACE );
for ( int iF = 0; fExp.More(); fExp.Next(), ++iF )
{
TopoDS_Face F = TopoDS::Face( fExp.Current() /*.Oriented( TopAbs_FORWARD )*/);
int faceID = meshDS->ShapeToIndex( F );
SMESH_ComputeErrorPtr& faceErr = aMesh.GetSubMesh( F )->GetComputeError();
_quadraticMesh = helper.IsQuadraticSubMesh( F );
const bool ignoreMediumNodes = _quadraticMesh;
// build viscous layers if required
if ( F.Orientation() != TopAbs_FORWARD &&
F.Orientation() != TopAbs_REVERSED )
F.Orientation( TopAbs_FORWARD ); // avoid pb with TopAbs_INTERNAL
SMESH_ProxyMesh::Ptr proxyMesh = StdMeshers_ViscousLayers2D::Compute( aMesh, F );
if ( !proxyMesh )
continue;
// ------------------------
// get all EDGEs of a FACE
// ------------------------
TSideVector wires =
StdMeshers_FaceSide::GetFaceWires( F, aMesh, ignoreMediumNodes, faceErr, proxyMesh );
if ( faceErr && !faceErr->IsOK() )
continue;
int nbWires = wires.size();
if ( nbWires == 0 )
{
faceErr.reset
( new SMESH_ComputeError
( COMPERR_ALGO_FAILED, "Problem in StdMeshers_FaceSide::GetFaceWires()" ));
continue;
}
if ( wires[0]->NbSegments() < 3 ) // ex: a circle with 2 segments
{
faceErr.reset
( new SMESH_ComputeError
( COMPERR_BAD_INPUT_MESH, SMESH_Comment("Too few segments: ")<<wires[0]->NbSegments()) );
continue;
}
// ----------------------
// compute maxh of a FACE
// ----------------------
if ( !_hypParameters )
{
double edgeLength = 0;
if (_hypLengthFromEdges )
{
// compute edgeLength as an average segment length
int nbSegments = 0;
for ( int iW = 0; iW < nbWires; ++iW )
{
edgeLength += wires[ iW ]->Length();
nbSegments += wires[ iW ]->NbSegments();
}
if ( nbSegments )
edgeLength /= nbSegments;
netgen::mparam.maxh = edgeLength;
}
else if ( isDefaultHyp )
{
// set edgeLength by a longest segment
double maxSeg2 = 0;
for ( int iW = 0; iW < nbWires; ++iW )
{
const UVPtStructVec& points = wires[ iW ]->GetUVPtStruct();
if ( points.empty() )
return error( COMPERR_BAD_INPUT_MESH );
gp_Pnt pPrev = SMESH_TNodeXYZ( points[0].node );
for ( size_t i = 1; i < points.size(); ++i )
{
gp_Pnt p = SMESH_TNodeXYZ( points[i].node );
maxSeg2 = Max( maxSeg2, p.SquareDistance( pPrev ));
pPrev = p;
}
}
edgeLength = sqrt( maxSeg2 ) * 1.05;
netgen::mparam.maxh = edgeLength;
}
if ( netgen::mparam.maxh < DBL_MIN )
netgen::mparam.maxh = occgeoComm.GetBoundingBox().Diam();
if ( !isCommonLocalSize )
{
netgen::mparam.minh = aMesher.GetDefaultMinSize( F, netgen::mparam.maxh );
}
}
// prepare occgeom
netgen::OCCGeometry occgeom;
occgeom.shape = F;
occgeom.fmap.Add( F );
occgeom.CalcBoundingBox();
occgeom.facemeshstatus.SetSize(1);
occgeom.facemeshstatus = 0;
occgeom.face_maxh_modified.SetSize(1);
occgeom.face_maxh_modified = 0;
occgeom.face_maxh.SetSize(1);
occgeom.face_maxh = netgen::mparam.maxh;
// -------------------------
// Fill netgen mesh
// -------------------------
// MESHCONST_ANALYSE step may lead to a failure, so we make an attempt
// w/o MESHCONST_ANALYSE at the second loop
int err = 0;
enum { LOC_SIZE, NO_LOC_SIZE };
int iLoop = isCommonLocalSize ? 0 : 1;
for ( ; iLoop < 2; iLoop++ )
{
//bool isMESHCONST_ANALYSE = false;
InitComputeError();
netgen::Mesh * ngMesh = ngMeshes[ iLoop ];
ngMesh->DeleteMesh();
if ( iLoop == NO_LOC_SIZE )
{
ngMesh->SetGlobalH ( mparam.maxh );
ngMesh->SetMinimalH( mparam.minh );
Box<3> bb = occgeom.GetBoundingBox();
bb.Increase (bb.Diam()/10);
ngMesh->SetLocalH (bb.PMin(), bb.PMax(), mparam.grading);
}
nodeVec.clear();
faceErr = aMesher.AddSegmentsToMesh( *ngMesh, occgeom, wires, helper, nodeVec,
/*overrideMinH=*/!_hypParameters);
if ( faceErr && !faceErr->IsOK() )
break;
//if ( !isCommonLocalSize )
//limitSize( ngMesh, mparam.maxh * 0.8);
// -------------------------
// Generate surface mesh
// -------------------------
const int startWith = MESHCONST_MESHSURFACE;
const int endWith = toOptimize ? MESHCONST_OPTSURFACE : MESHCONST_MESHSURFACE;
SMESH_Comment str;
try {
OCC_CATCH_SIGNALS;
#if NETGEN_VERSION >=6
std::shared_ptr<netgen::Mesh> mesh_ptr(ngMesh, [](netgen::Mesh*) {});
err = netgen::OCCGenerateMesh(occgeom, mesh_ptr, netgen::mparam, startWith, endWith);
#elif NETGEN_VERSION > 4
err = netgen::OCCGenerateMesh(occgeom, ngMesh, netgen::mparam, startWith, endWith);
#else
char *optstr = 0;
err = netgen::OCCGenerateMesh(occgeom, ngMesh, startWith, endWith, optstr);
#endif
if ( netgen::multithread.terminate )
return false;
if ( err )
str << "Error in netgen::OCCGenerateMesh() at " << netgen::multithread.task;
}
catch (Standard_Failure& ex)
{
err = 1;
str << "Exception in netgen::OCCGenerateMesh()"
<< " at " << netgen::multithread.task
<< ": " << ex.DynamicType()->Name();
if ( ex.GetMessageString() && strlen( ex.GetMessageString() ))
str << ": " << ex.GetMessageString();
}
catch (...) {
err = 1;
str << "Exception in netgen::OCCGenerateMesh()"
<< " at " << netgen::multithread.task;
}
if ( err )
{
if ( aMesher.FixFaceMesh( occgeom, *ngMesh, 1 ))
break;
if ( iLoop == LOC_SIZE )
{
netgen::mparam.minh = netgen::mparam.maxh;
netgen::mparam.maxh = 0;
for ( int iW = 0; iW < wires.size(); ++iW )
{
StdMeshers_FaceSidePtr wire = wires[ iW ];
const vector<UVPtStruct>& uvPtVec = wire->GetUVPtStruct();
for ( size_t iP = 1; iP < uvPtVec.size(); ++iP )
{
SMESH_TNodeXYZ p( uvPtVec[ iP ].node );
netgen::Point3d np( p.X(),p.Y(),p.Z());
double segLen = p.Distance( uvPtVec[ iP-1 ].node );
double size = ngMesh->GetH( np );
netgen::mparam.minh = Min( netgen::mparam.minh, size );
netgen::mparam.maxh = Max( netgen::mparam.maxh, segLen );
}
}
//cerr << "min " << netgen::mparam.minh << " max " << netgen::mparam.maxh << endl;
netgen::mparam.minh *= 0.9;
netgen::mparam.maxh *= 1.1;
continue;
}
else
{
faceErr.reset( new SMESH_ComputeError( COMPERR_ALGO_FAILED, str ));
}
}
// ----------------------------------------------------
// Fill the SMESHDS with the generated nodes and faces
// ----------------------------------------------------
int nbNodes = ngMesh->GetNP();
int nbFaces = ngMesh->GetNSE();
int nbInputNodes = nodeVec.size()-1;
nodeVec.resize( nbNodes+1, 0 );
// add nodes
for ( int ngID = nbInputNodes + 1; ngID <= nbNodes; ++ngID )
{
const MeshPoint& ngPoint = ngMesh->Point( ngID );
SMDS_MeshNode * node = meshDS->AddNode(ngPoint(0), ngPoint(1), ngPoint(2));
nodeVec[ ngID ] = node;
}
// create faces
int i,j;
vector<const SMDS_MeshNode*> nodes;
for ( i = 1; i <= nbFaces ; ++i )
{
const Element2d& elem = ngMesh->SurfaceElement(i);
nodes.resize( elem.GetNP() );
for (j=1; j <= elem.GetNP(); ++j)
{
int pind = elem.PNum(j);
if ( pind < 1 )
break;
nodes[ j-1 ] = nodeVec[ pind ];
if ( nodes[ j-1 ]->GetPosition()->GetTypeOfPosition() == SMDS_TOP_3DSPACE )
{
const PointGeomInfo& pgi = elem.GeomInfoPi(j);
meshDS->SetNodeOnFace( nodes[ j-1 ], faceID, pgi.u, pgi.v);
}
}
if ( j > elem.GetNP() )
{
SMDS_MeshFace* face = 0;
if ( elem.GetType() == TRIG )
face = helper.AddFace(nodes[0],nodes[1],nodes[2]);
else
face = helper.AddFace(nodes[0],nodes[1],nodes[2],nodes[3]);
}
}
break;
} // two attempts
} // loop on FACEs
return true;
}