コード例 #1
0
static TError AddSegmentsToMesh(netgen::Mesh&                    ngMesh,
                                OCCGeometry&                     geom,
                                const TSideVector&               wires,
                                SMESH_MesherHelper&              helper,
                                vector< const SMDS_MeshNode* > & nodeVec)
{
  // ----------------------------
  // Check wires and count nodes
  // ----------------------------
  int nbNodes = 0;
  for ( int iW = 0; iW < wires.size(); ++iW )
  {
    StdMeshers_FaceSidePtr wire = wires[ iW ];
    if ( wire->MissVertexNode() )
      return TError
        (new SMESH_ComputeError(COMPERR_BAD_INPUT_MESH, "Missing nodes on vertices"));
      
    const vector<UVPtStruct>& uvPtVec = wire->GetUVPtStruct();
    if ( uvPtVec.size() != wire->NbPoints() )
      return TError
        (new SMESH_ComputeError(COMPERR_BAD_INPUT_MESH,
                                SMESH_Comment("Unexpected nb of points on wire ") << iW
                                << ": " << uvPtVec.size()<<" != "<<wire->NbPoints()));
    nbNodes += wire->NbSegments();
  }
  nodeVec.reserve( nbNodes );

  // -----------------
  // Fill netgen mesh
  // -----------------

//   netgen::Box<3> bb = geom.GetBoundingBox();
//   bb.Increase (bb.Diam()/10);
//   ngMesh.SetLocalH (bb.PMin(), bb.PMax(), 0.5); // set grading

  const int faceID = 1, solidID = 0;
  ngMesh.AddFaceDescriptor (FaceDescriptor(faceID, solidID, solidID, 0));

  for ( int iW = 0; iW < wires.size(); ++iW )
  {
    StdMeshers_FaceSidePtr wire = wires[ iW ];
    const vector<UVPtStruct>& uvPtVec = wire->GetUVPtStruct();

    int firstPointID = ngMesh.GetNP() + 1;
    int edgeID = 1, posID = -2;
    for ( int i = 0; i < wire->NbSegments(); ++i ) // loop on segments
    {
      // Add the first point of a segment
      const SMDS_MeshNode * n = uvPtVec[ i ].node;
      const int posShapeID = n->GetPosition()->GetShapeId();

      // skip nodes on degenerated edges
      if ( helper.IsDegenShape( posShapeID ) &&
           helper.IsDegenShape( uvPtVec[ i+1 ].node->GetPosition()->GetShapeId() ))
        continue;

      nodeVec.push_back( n );

      MeshPoint mp( Point<3> (n->X(), n->Y(), n->Z()) );
      ngMesh.AddPoint ( mp, 1, EDGEPOINT );

      // Add the segment
      Segment seg;

      seg.pnums[0] = ngMesh.GetNP();          // ng node id
      seg.pnums[1] = seg.pnums[0] + 1;              // ng node id
      seg.edgenr = ngMesh.GetNSeg() + 1;// segment id
      seg.si = faceID;                  // = geom.fmap.FindIndex (face);

      for ( int iEnd = 0; iEnd < 2; ++iEnd)
      {
        const UVPtStruct& pnt = uvPtVec[ i + iEnd ];

        seg.epgeominfo[ iEnd ].dist = pnt.param; // param on curve
        seg.epgeominfo[ iEnd ].u    = pnt.u;
        seg.epgeominfo[ iEnd ].v    = pnt.v;

        // find out edge id and node parameter on edge
        bool onVertex = ( pnt.node->GetPosition()->GetTypeOfPosition() == SMDS_TOP_VERTEX );
        if ( onVertex || posShapeID != posID )
        {
          // get edge id
          double normParam = pnt.normParam;
          if ( onVertex )
            normParam = 0.5 * ( uvPtVec[ i ].normParam + uvPtVec[ i+1 ].normParam );
          const TopoDS_Edge& edge = wire->Edge( wire->EdgeIndex( normParam ));
          edgeID = geom.emap.FindIndex( edge );
          posID  = posShapeID;
          if ( onVertex ) // param on curve is different on each of two edges
            seg.epgeominfo[ iEnd ].dist = helper.GetNodeU( edge, pnt.node );
        }
        seg.epgeominfo[ iEnd ].edgenr = edgeID; //  = geom.emap.FindIndex(edge);
      }

      ngMesh.AddSegment (seg);

//       cout << "Segment: " << seg.edgenr << endl
//            << "\tp1: " << seg.p1 << endl
//            << "\tp2: " << seg.p2 << endl
//            << "\tp0 param: " << seg.epgeominfo[ 0 ].dist << endl
//            << "\tp0 uv: " << seg.epgeominfo[ 0 ].u <<", "<< seg.epgeominfo[ 0 ].v << endl
//            << "\tp0 edge: " << seg.epgeominfo[ 0 ].edgenr << endl
//            << "\tp1 param: " << seg.epgeominfo[ 1 ].dist << endl
//            << "\tp1 uv: " << seg.epgeominfo[ 1 ].u <<", "<< seg.epgeominfo[ 1 ].v << endl
//            << "\tp1 edge: " << seg.epgeominfo[ 1 ].edgenr << endl;
    }
    Segment& seg = ngMesh.LineSegment( ngMesh.GetNSeg() );
    seg.pnums[1] = firstPointID;
  }

  ngMesh.CalcSurfacesOfNode();  

  return TError();
}
コード例 #2
0
bool NETGENPlugin_NETGEN_2D_ONLY::Compute(SMESH_Mesh&         aMesh,
        const TopoDS_Shape& aShape)
{
    netgen::multithread.terminate = 0;
    //netgen::multithread.task = "Surface meshing";

    SMESHDS_Mesh* meshDS = aMesh.GetMeshDS();
    SMESH_MesherHelper helper(aMesh);
    helper.SetElementsOnShape( true );

    NETGENPlugin_NetgenLibWrapper ngLib;
    ngLib._isComputeOk = false;

    netgen::Mesh   ngMeshNoLocSize;
#if NETGEN_VERSION < 6
    netgen::Mesh * ngMeshes[2] = { (netgen::Mesh*) ngLib._ngMesh,  & ngMeshNoLocSize };
#else
    netgen::Mesh * ngMeshes[2] = { (netgen::Mesh*) ngLib._ngMesh.get(),  & ngMeshNoLocSize };
#endif
    netgen::OCCGeometry occgeoComm;

    // min / max sizes are set as follows:
    // if ( _hypParameters )
    //    min and max are defined by the user
    // else if ( _hypLengthFromEdges )
    //    min = aMesher.GetDefaultMinSize()
    //    max = average segment len of a FACE
    // else if ( _hypMaxElementArea )
    //    min = aMesher.GetDefaultMinSize()
    //    max = f( _hypMaxElementArea )
    // else
    //    min = aMesher.GetDefaultMinSize()
    //    max = max segment len of a FACE

    NETGENPlugin_Mesher aMesher( &aMesh, aShape, /*isVolume=*/false);
    aMesher.SetParameters( _hypParameters ); // _hypParameters -> netgen::mparam
    const bool toOptimize = _hypParameters ? _hypParameters->GetOptimize() : true;
    if ( _hypMaxElementArea )
    {
        netgen::mparam.maxh = sqrt( 2. * _hypMaxElementArea->GetMaxArea() / sqrt(3.0) );
    }
    if ( _hypQuadranglePreference )
        netgen::mparam.quad = true;

    // local size is common for all FACEs in aShape?
    const bool isCommonLocalSize = ( !_hypLengthFromEdges && !_hypMaxElementArea && netgen::mparam.uselocalh );
    const bool isDefaultHyp = ( !_hypLengthFromEdges && !_hypMaxElementArea && !_hypParameters );

    if ( isCommonLocalSize ) // compute common local size in ngMeshes[0]
    {
        //list< SMESH_subMesh* > meshedSM[4]; --> all sub-shapes are added to occgeoComm
        aMesher.PrepareOCCgeometry( occgeoComm, aShape, aMesh );//, meshedSM );

        // local size set at MESHCONST_ANALYSE step depends on
        // minh, face_maxh, grading and curvaturesafety; find minh if not set by the user
        if ( !_hypParameters || netgen::mparam.minh < DBL_MIN )
        {
            if ( !_hypParameters )
                netgen::mparam.maxh = occgeoComm.GetBoundingBox().Diam() / 3.;
            netgen::mparam.minh = aMesher.GetDefaultMinSize( aShape, netgen::mparam.maxh );
        }
        // set local size depending on curvature and NOT closeness of EDGEs
        netgen::occparam.resthcloseedgeenable = false;
        //netgen::occparam.resthcloseedgefac = 1.0 + netgen::mparam.grading;
        occgeoComm.face_maxh = netgen::mparam.maxh;
        netgen::OCCSetLocalMeshSize( occgeoComm, *ngMeshes[0] );
        occgeoComm.emap.Clear();
        occgeoComm.vmap.Clear();

        // set local size according to size of existing segments
        const double factor = netgen::occparam.resthcloseedgefac;
        TopTools_IndexedMapOfShape edgeMap;
        TopExp::MapShapes( aMesh.GetShapeToMesh(), TopAbs_EDGE, edgeMap );
        for ( int iE = 1; iE <= edgeMap.Extent(); ++iE )
        {
            const TopoDS_Shape& edge = edgeMap( iE );
            if ( SMESH_Algo::isDegenerated( TopoDS::Edge( edge ))/* ||
           helper.IsSubShape( edge, aShape )*/)
                continue;
            SMESHDS_SubMesh* smDS = meshDS->MeshElements( edge );
            if ( !smDS ) continue;
            SMDS_ElemIteratorPtr segIt = smDS->GetElements();
            while ( segIt->more() )
            {
                const SMDS_MeshElement* seg = segIt->next();
                SMESH_TNodeXYZ n1 = seg->GetNode(0);
                SMESH_TNodeXYZ n2 = seg->GetNode(1);
                gp_XYZ p = 0.5 * ( n1 + n2 );
                netgen::Point3d pi(p.X(), p.Y(), p.Z());
                ngMeshes[0]->RestrictLocalH( pi, factor * ( n1 - n2 ).Modulus() );
            }
        }
    }
    netgen::mparam.uselocalh = toOptimize; // restore as it is used at surface optimization

    // ==================
    // Loop on all FACEs
    // ==================

    vector< const SMDS_MeshNode* > nodeVec;

    TopExp_Explorer fExp( aShape, TopAbs_FACE );
    for ( int iF = 0; fExp.More(); fExp.Next(), ++iF )
    {
        TopoDS_Face F = TopoDS::Face( fExp.Current() /*.Oriented( TopAbs_FORWARD )*/);
        int    faceID = meshDS->ShapeToIndex( F );
        SMESH_ComputeErrorPtr& faceErr = aMesh.GetSubMesh( F )->GetComputeError();

        _quadraticMesh = helper.IsQuadraticSubMesh( F );
        const bool ignoreMediumNodes = _quadraticMesh;

        // build viscous layers if required
        if ( F.Orientation() != TopAbs_FORWARD &&
                F.Orientation() != TopAbs_REVERSED )
            F.Orientation( TopAbs_FORWARD ); // avoid pb with TopAbs_INTERNAL
        SMESH_ProxyMesh::Ptr proxyMesh = StdMeshers_ViscousLayers2D::Compute( aMesh, F );
        if ( !proxyMesh )
            continue;

        // ------------------------
        // get all EDGEs of a FACE
        // ------------------------
        TSideVector wires =
            StdMeshers_FaceSide::GetFaceWires( F, aMesh, ignoreMediumNodes, faceErr, proxyMesh );
        if ( faceErr && !faceErr->IsOK() )
            continue;
        int nbWires = wires.size();
        if ( nbWires == 0 )
        {
            faceErr.reset
            ( new SMESH_ComputeError
              ( COMPERR_ALGO_FAILED, "Problem in StdMeshers_FaceSide::GetFaceWires()" ));
            continue;
        }
        if ( wires[0]->NbSegments() < 3 ) // ex: a circle with 2 segments
        {
            faceErr.reset
            ( new SMESH_ComputeError
              ( COMPERR_BAD_INPUT_MESH, SMESH_Comment("Too few segments: ")<<wires[0]->NbSegments()) );
            continue;
        }

        // ----------------------
        // compute maxh of a FACE
        // ----------------------

        if ( !_hypParameters )
        {
            double edgeLength = 0;
            if (_hypLengthFromEdges )
            {
                // compute edgeLength as an average segment length
                int nbSegments = 0;
                for ( int iW = 0; iW < nbWires; ++iW )
                {
                    edgeLength += wires[ iW ]->Length();
                    nbSegments += wires[ iW ]->NbSegments();
                }
                if ( nbSegments )
                    edgeLength /= nbSegments;
                netgen::mparam.maxh = edgeLength;
            }
            else if ( isDefaultHyp )
            {
                // set edgeLength by a longest segment
                double maxSeg2 = 0;
                for ( int iW = 0; iW < nbWires; ++iW )
                {
                    const UVPtStructVec& points = wires[ iW ]->GetUVPtStruct();
                    if ( points.empty() )
                        return error( COMPERR_BAD_INPUT_MESH );
                    gp_Pnt pPrev = SMESH_TNodeXYZ( points[0].node );
                    for ( size_t i = 1; i < points.size(); ++i )
                    {
                        gp_Pnt p = SMESH_TNodeXYZ( points[i].node );
                        maxSeg2 = Max( maxSeg2, p.SquareDistance( pPrev ));
                        pPrev = p;
                    }
                }
                edgeLength = sqrt( maxSeg2 ) * 1.05;
                netgen::mparam.maxh = edgeLength;
            }
            if ( netgen::mparam.maxh < DBL_MIN )
                netgen::mparam.maxh = occgeoComm.GetBoundingBox().Diam();

            if ( !isCommonLocalSize )
            {
                netgen::mparam.minh = aMesher.GetDefaultMinSize( F, netgen::mparam.maxh );
            }
        }

        // prepare occgeom
        netgen::OCCGeometry occgeom;
        occgeom.shape = F;
        occgeom.fmap.Add( F );
        occgeom.CalcBoundingBox();
        occgeom.facemeshstatus.SetSize(1);
        occgeom.facemeshstatus = 0;
        occgeom.face_maxh_modified.SetSize(1);
        occgeom.face_maxh_modified = 0;
        occgeom.face_maxh.SetSize(1);
        occgeom.face_maxh = netgen::mparam.maxh;

        // -------------------------
        // Fill netgen mesh
        // -------------------------

        // MESHCONST_ANALYSE step may lead to a failure, so we make an attempt
        // w/o MESHCONST_ANALYSE at the second loop
        int err = 0;
        enum { LOC_SIZE, NO_LOC_SIZE };
        int iLoop = isCommonLocalSize ? 0 : 1;
        for ( ; iLoop < 2; iLoop++ )
        {
            //bool isMESHCONST_ANALYSE = false;
            InitComputeError();

            netgen::Mesh * ngMesh = ngMeshes[ iLoop ];
            ngMesh->DeleteMesh();

            if ( iLoop == NO_LOC_SIZE )
            {
                ngMesh->SetGlobalH ( mparam.maxh );
                ngMesh->SetMinimalH( mparam.minh );
                Box<3> bb = occgeom.GetBoundingBox();
                bb.Increase (bb.Diam()/10);
                ngMesh->SetLocalH (bb.PMin(), bb.PMax(), mparam.grading);
            }

            nodeVec.clear();
            faceErr = aMesher.AddSegmentsToMesh( *ngMesh, occgeom, wires, helper, nodeVec,
                                                 /*overrideMinH=*/!_hypParameters);
            if ( faceErr && !faceErr->IsOK() )
                break;

            //if ( !isCommonLocalSize )
            //limitSize( ngMesh, mparam.maxh * 0.8);

            // -------------------------
            // Generate surface mesh
            // -------------------------

            const int startWith = MESHCONST_MESHSURFACE;
            const int endWith   = toOptimize ? MESHCONST_OPTSURFACE : MESHCONST_MESHSURFACE;

            SMESH_Comment str;
            try {
                OCC_CATCH_SIGNALS;

#if NETGEN_VERSION >=6
                std::shared_ptr<netgen::Mesh> mesh_ptr(ngMesh,  [](netgen::Mesh*) {});
                err = netgen::OCCGenerateMesh(occgeom, mesh_ptr, netgen::mparam, startWith, endWith);
#elif NETGEN_VERSION > 4
                err = netgen::OCCGenerateMesh(occgeom, ngMesh, netgen::mparam, startWith, endWith);
#else
                char *optstr = 0;
                err = netgen::OCCGenerateMesh(occgeom, ngMesh, startWith, endWith, optstr);
#endif
                if ( netgen::multithread.terminate )
                    return false;
                if ( err )
                    str << "Error in netgen::OCCGenerateMesh() at " << netgen::multithread.task;
            }
            catch (Standard_Failure& ex)
            {
                err = 1;
                str << "Exception in  netgen::OCCGenerateMesh()"
                    << " at " << netgen::multithread.task
                    << ": " << ex.DynamicType()->Name();
                if ( ex.GetMessageString() && strlen( ex.GetMessageString() ))
                    str << ": " << ex.GetMessageString();
            }
            catch (...) {
                err = 1;
                str << "Exception in  netgen::OCCGenerateMesh()"
                    << " at " << netgen::multithread.task;
            }
            if ( err )
            {
                if ( aMesher.FixFaceMesh( occgeom, *ngMesh, 1 ))
                    break;
                if ( iLoop == LOC_SIZE )
                {
                    netgen::mparam.minh = netgen::mparam.maxh;
                    netgen::mparam.maxh = 0;
                    for ( int iW = 0; iW < wires.size(); ++iW )
                    {
                        StdMeshers_FaceSidePtr wire = wires[ iW ];
                        const vector<UVPtStruct>& uvPtVec = wire->GetUVPtStruct();
                        for ( size_t iP = 1; iP < uvPtVec.size(); ++iP )
                        {
                            SMESH_TNodeXYZ   p( uvPtVec[ iP ].node );
                            netgen::Point3d np( p.X(),p.Y(),p.Z());
                            double segLen = p.Distance( uvPtVec[ iP-1 ].node );
                            double   size = ngMesh->GetH( np );
                            netgen::mparam.minh = Min( netgen::mparam.minh, size );
                            netgen::mparam.maxh = Max( netgen::mparam.maxh, segLen );
                        }
                    }
                    //cerr << "min " << netgen::mparam.minh << " max " << netgen::mparam.maxh << endl;
                    netgen::mparam.minh *= 0.9;
                    netgen::mparam.maxh *= 1.1;
                    continue;
                }
                else
                {
                    faceErr.reset( new SMESH_ComputeError( COMPERR_ALGO_FAILED, str ));
                }
            }


            // ----------------------------------------------------
            // Fill the SMESHDS with the generated nodes and faces
            // ----------------------------------------------------

            int nbNodes = ngMesh->GetNP();
            int nbFaces = ngMesh->GetNSE();

            int nbInputNodes = nodeVec.size()-1;
            nodeVec.resize( nbNodes+1, 0 );

            // add nodes
            for ( int ngID = nbInputNodes + 1; ngID <= nbNodes; ++ngID )
            {
                const MeshPoint& ngPoint = ngMesh->Point( ngID );
                SMDS_MeshNode * node = meshDS->AddNode(ngPoint(0), ngPoint(1), ngPoint(2));
                nodeVec[ ngID ] = node;
            }

            // create faces
            int i,j;
            vector<const SMDS_MeshNode*> nodes;
            for ( i = 1; i <= nbFaces ; ++i )
            {
                const Element2d& elem = ngMesh->SurfaceElement(i);
                nodes.resize( elem.GetNP() );
                for (j=1; j <= elem.GetNP(); ++j)
                {
                    int pind = elem.PNum(j);
                    if ( pind < 1 )
                        break;
                    nodes[ j-1 ] = nodeVec[ pind ];
                    if ( nodes[ j-1 ]->GetPosition()->GetTypeOfPosition() == SMDS_TOP_3DSPACE )
                    {
                        const PointGeomInfo& pgi = elem.GeomInfoPi(j);
                        meshDS->SetNodeOnFace( nodes[ j-1 ], faceID, pgi.u, pgi.v);
                    }
                }
                if ( j > elem.GetNP() )
                {
                    SMDS_MeshFace* face = 0;
                    if ( elem.GetType() == TRIG )
                        face = helper.AddFace(nodes[0],nodes[1],nodes[2]);
                    else
                        face = helper.AddFace(nodes[0],nodes[1],nodes[2],nodes[3]);
                }
            }

            break;
        } // two attempts
    } // loop on FACEs

    return true;
}