TPZCompMesh *MalhaCompDois(TPZGeoMesh * gmesh, int pOrder, bool isdiscontinuous)
{
/// criar materiais
int dim = 2;
TPZMatPoisson3d *material;
material = new TPZMatPoisson3d(matId,dim);
TPZMaterial * mat(material);
material->SetNoPenalty();
material->SetNonSymmetric();
REAL diff = -1.;
REAL conv = 0.;
TPZVec<REAL> convdir(3,0.);
REAL flux = 0.;
material->SetParameters(diff, conv, convdir);
material->SetInternalFlux(flux);
material->NStateVariables();
TPZCompEl::SetgOrder(pOrder);
TPZCompMesh * cmesh = new TPZCompMesh(gmesh);
cmesh->SetDimModel(dim);
//cmesh->SetAllCreateFunctionsContinuous();
cmesh->InsertMaterialObject(mat);
TPZAutoPointer<TPZFunction<STATE> > forcef = new TPZDummyFunction<STATE>(ForcingF, 5);
material->SetForcingFunction(forcef);
///Inserir condicao de contorno
TPZFMatrix<STATE> val1(2,2,0.), val2(2,1,0.);
TPZMaterial * BCond0 = material->CreateBC(mat, bc0,dirichlet, val1, val2);
TPZMaterial * BCond2 = material->CreateBC(mat, bc2,dirichlet, val1, val2);
TPZMaterial * BCond1 = material->CreateBC(mat, bc1,dirichlet, val1, val2);
TPZMaterial * BCond3 = material->CreateBC(mat, bc3,dirichlet, val1, val2);
cmesh->InsertMaterialObject(BCond0);
cmesh->InsertMaterialObject(BCond1);
cmesh->InsertMaterialObject(BCond2);
cmesh->InsertMaterialObject(BCond3);
//Ajuste da estrutura de dados computacional
if (isdiscontinuous==true) {
//Set discontinuous functions
cmesh->SetAllCreateFunctionsDiscontinuous();
cmesh->AutoBuild();
cmesh->ExpandSolution();
cmesh->AdjustBoundaryElements();
cmesh->CleanUpUnconnectedNodes();
}
else{
cmesh->SetAllCreateFunctionsContinuous();
cmesh->AutoBuild();
cmesh->ExpandSolution();
cmesh->AdjustBoundaryElements();
cmesh->CleanUpUnconnectedNodes();
}
return cmesh;
}
TPZCompMesh * ComputationalMesh(TPZGeoMesh * gmesh, int p)
{
int matid = 1;
int dim = 2;
REAL wavespeed = 1.0;
///Computational Mesh
TPZCompEl::SetgOrder(p);
TPZCompMesh * cmesh = new TPZCompMesh(gmesh);
cmesh->SetDimModel(dim);
cmesh->SetAllCreateFunctionsContinuous();
TPZMaterial * Air = new TPZLinearWave(matid,dim);
cmesh->InsertMaterialObject(Air);
{
//Boundary Conditions
TPZFMatrix<STATE> k1(dim,dim,0.), k2(dim,dim,0.);
TPZMaterial * BCD = Air->CreateBC(Air, 2, 0, k1, k2);
cmesh->InsertMaterialObject(BCD);
TPZMaterial * BCN = Air->CreateBC(Air, 3, 1, k1, k2);
cmesh->InsertMaterialObject(BCN);
}
cmesh->AutoBuild();
cmesh->AdjustBoundaryElements();
cmesh->CleanUpUnconnectedNodes();
return cmesh;
}
TPZCompMesh *CompMesh1D(TPZGeoMesh *gmesh,int p, TPZMaterial *material,TPZVec<int> &bc,TPZVec<int> &bcType) {
if(!material || bc.NElements()<2 || bcType.NElements() != bc.NElements()) return NULL;
int dim = 1;
TPZAutoPointer<TPZMaterial> mat(material);
// related to interpolation space
TPZCompEl::SetgOrder(p);
TPZCompMesh *cmesh = new TPZCompMesh(gmesh);
cmesh->SetDimModel(dim);
cmesh->SetAllCreateFunctionsContinuous();
cmesh->InsertMaterialObject(mat);
// Related to boundary conditions
// REAL uN=1-cosh(1.)/sinh(1.);
TPZFMatrix<STATE> val1(1,1,0.), val2(1,1,0.);
if(!bcType[0]) // dirichlet
val2.PutVal(0,0,0.0);
TPZAutoPointer<TPZMaterial> BCond1 = material->CreateBC(mat, bc[0],bcType[0], val1, val2);
cmesh->InsertMaterialObject(BCond1);
if(!bcType[1]) // dirichlet
val2.PutVal(0,0,0.0);
TPZAutoPointer<TPZMaterial> BCond2 = material->CreateBC(mat, bc[1],bcType[1], val1, val2);
cmesh->InsertMaterialObject(BCond2);
//Adjusting data
cmesh->AutoBuild();
cmesh->AdjustBoundaryElements();
cmesh->CleanUpUnconnectedNodes();
return cmesh;
}
TPZCompMesh *MalhaMultifisicaOpt(TPZVec<TPZCompMesh *> meshvec, TPZGeoMesh *gmesh){
//Creating computational mesh for multiphysic elements
gmesh->ResetReference();
TPZCompMesh *mphysics = new TPZCompMesh(gmesh);
//criando material
int dim =2;
TPZMatPoissonControl *material = new TPZMatPoissonControl(MatId,dim);
//incluindo os dados do problema
REAL k=1;
REAL alpha=1;
material-> SetParameters( k, alpha);
//solucao exata
TPZAutoPointer<TPZFunction<STATE> > solexata;
solexata = new TPZDummyFunction<STATE>(StateAd, 5);
material->SetForcingFunctionExact(solexata);
//funcao do lado direito da equacao do problema
TPZAutoPointer<TPZFunction<STATE> > force;
TPZDummyFunction<STATE> *dum;
dum = new TPZDummyFunction<STATE>(OptForcing, 5);
dum->SetPolynomialOrder(20);
force = dum;
material->SetForcingFunction(force);
//inserindo o material na malha computacional
TPZMaterial *mat(material);
mphysics->InsertMaterialObject(mat);
mphysics->SetDimModel(dim);
//Criando condicoes de contorno
TPZFMatrix<STATE> val1(2,2,0.), val2(2,1,0.);
TPZMaterial * BCond0 = material->CreateBC(mat, bc0, bcdirichlet, val1, val2);
TPZMaterial * BCond1 = material->CreateBC(mat, bc1, bcdirichlet, val1, val2);
TPZMaterial * BCond2 = material->CreateBC(mat, bc2, bcdirichlet, val1, val2);
TPZMaterial * BCond3 = material->CreateBC(mat, bc3, bcdirichlet, val1, val2);
///Inserir condicoes de contorno
mphysics->InsertMaterialObject(BCond0);
mphysics->InsertMaterialObject(BCond1);
mphysics->InsertMaterialObject(BCond2);
mphysics->InsertMaterialObject(BCond3);
mphysics->SetAllCreateFunctionsMultiphysicElem();
//Fazendo auto build
mphysics->AutoBuild();
mphysics->AdjustBoundaryElements();
mphysics->CleanUpUnconnectedNodes();
TPZBuildMultiphysicsMesh::AddElements(meshvec, mphysics);
TPZBuildMultiphysicsMesh::AddConnects(meshvec,mphysics);
TPZBuildMultiphysicsMesh::TransferFromMeshes(meshvec, mphysics);
return mphysics;
}
int main() {
//malha geometrica
TPZGeoMesh *firstmesh = new TPZGeoMesh;
firstmesh->SetName("Malha Geometrica : Nós e Elementos");
firstmesh->NodeVec().Resize(10);
TPZVec<REAL> coord(2); //,coordtrans(2);
// REAL ct,st,PI=3.141592654;
// cout << "\nEntre rotacao do eixo n1 (graus) -> ";
// REAL g;
// cin >> g;
// g = g*PI/180.;
// ct = cos(g);
// st = sin(g);
//ct = 1.;
//st = 0.;
//nos geometricos
//no 0
coord[0] = 0;
coord[1] = 0;
// coordtrans[0] = ct*coord[0]-st*coord[1];
// coordtrans[1] = st*coord[0]+ct*coord[1];
firstmesh->NodeVec()[0].Initialize(coord,*firstmesh);
//no 1
coord[0] = 1.;
coord[1] = 0;
// coordtrans[0] = ct*coord[0]-st*coord[1];
// coordtrans[1] = st*coord[0]+ct*coord[1];
firstmesh->NodeVec()[1].Initialize(coord,*firstmesh);
//no 2
coord[0] = 2.;
coord[1] = 0.;
// coordtrans[0] = ct*coord[0]-st*coord[1];
// coordtrans[1] = st*coord[0]+ct*coord[1];
firstmesh->NodeVec()[2].Initialize(coord,*firstmesh);
//no 3
coord[0] = 3.;
coord[1] = 0.;
// coordtrans[0] = ct*coord[0]-st*coord[1];
// coordtrans[1] = st*coord[0]+ct*coord[1];
firstmesh->NodeVec()[3].Initialize(coord,*firstmesh);
//no 4
coord[0] = 4;
coord[1] = 0.;
// coordtrans[0] = ct*coord[0]-st*coord[1];
// coordtrans[1] = st*coord[0]+ct*coord[1];
firstmesh->NodeVec()[4].Initialize(coord,*firstmesh);
//no 5
coord[0] = 0;
coord[1] = 1;
// coordtrans[0] = ct*coord[0]-st*coord[1];
// coordtrans[1] = st*coord[0]+ct*coord[1];
firstmesh->NodeVec()[5].Initialize(coord,*firstmesh);
//no 6
coord[0] = 1.;
coord[1] = 1.;
// coordtrans[0] = ct*coord[0]-st*coord[1];
// coordtrans[1] = st*coord[0]+ct*coord[1];
firstmesh->NodeVec()[6].Initialize(coord,*firstmesh);
//no 7
coord[0] = 2.;
coord[1] = 1.;
// coordtrans[0] = ct*coord[0]-st*coord[1];
// coordtrans[1] = st*coord[0]+ct*coord[1];
firstmesh->NodeVec()[7].Initialize(coord,*firstmesh);
//no 8
coord[0] = 3.;
coord[1] = 1;
// coordtrans[0] = ct*coord[0]-st*coord[1];
// coordtrans[1] = st*coord[0]+ct*coord[1];
firstmesh->NodeVec()[8].Initialize(coord,*firstmesh);
//no 9
coord[0] = 4;
coord[1] = 1;
// coordtrans[0] = ct*coord[0]-st*coord[1];
// coordtrans[1] = st*coord[0]+ct*coord[1];
firstmesh->NodeVec()[9].Initialize(coord,*firstmesh);
/*
TPZVec<int> nodeindexes(3);
nodeindexes[0] = 0;
nodeindexes[1] = 1;
nodeindexes[2] = 2;
//elementos geometricos
TPZGeoElT2d *elg0 = new TPZGeoElT2d(nodeindexes,1,*firstmesh);
nodeindexes[0] = 0;
nodeindexes[1] = 2;
nodeindexes[2] = 3;
TPZGeoElT2d *elg1 = new TPZGeoElT2d(nodeindexes,1,*firstmesh);
nodeindexes[0] = 0;
nodeindexes[1] = 1;
nodeindexes[2] = 2;
TPZGeoElT2d *elg2 = new TPZGeoElT2d(nodeindexes,2,*firstmesh);
nodeindexes[0] = 0;
nodeindexes[1] = 2;
nodeindexes[2] = 3;
TPZGeoElT2d *elg3 = new TPZGeoElT2d(nodeindexes,2,*firstmesh);
*/
TPZVec<int> nodeindexes(4);
//elementos geometricos
TPZGeoEl *elg[4];
nodeindexes[0] = 0;
nodeindexes[1] = 1;
nodeindexes[2] = 6;
nodeindexes[3] = 5;
elg[0] = new TPZGeoElQ2d(nodeindexes,1,*firstmesh);
nodeindexes[0] = 1;
nodeindexes[1] = 2;
nodeindexes[2] = 7;
nodeindexes[3] = 6;
elg[1] = new TPZGeoElQ2d(nodeindexes,1,*firstmesh);
nodeindexes[0] = 2;
nodeindexes[1] = 3;
nodeindexes[2] = 8;
nodeindexes[3] = 7;
elg[2] = new TPZGeoElQ2d(nodeindexes,1,*firstmesh);
nodeindexes[0] = 3;
nodeindexes[1] = 4;
nodeindexes[2] = 9;
nodeindexes[3] = 8;
elg[3] = new TPZGeoElQ2d(nodeindexes,1,*firstmesh);
//Arquivos de saida
ofstream outgm1("outgm1.dat");
ofstream outcm1("outcm1.dat");
ofstream outcm2("outcm2.dat");
//montagem de conectividades entre elementos
firstmesh->BuildConnectivity();
//malha computacional
TPZCompMesh *secondmesh = new TPZCompMesh(firstmesh);
secondmesh->SetName("Malha Computacional : Conectividades e Elementos");
//material
TPZMaterial *pl = LerMaterial("flavio.dat");
secondmesh->InsertMaterialObject(pl);
// pl = LerMaterial("placa2.dat");
// secondmesh->InsertMaterialObject(pl);
// pl = LerMaterial("placa3.dat");
// secondmesh->InsertMaterialObject(pl);
// carregamento hidrostatico no plano vertica xz
pl->SetForcingFunction(PressaoHid);
//CC : condicões de contorno
TPZBndCond *bc;
REAL big = 1.e12;
TPZFMatrix val1(6,6,0.),val2(6,1,0.);
// engastes nos lados 4 e 7 do elemento 0
TPZGeoElBC(elg[0],4,-2,*firstmesh);
TPZGeoElBC(elg[0],7,-2,*firstmesh);
// engaste no lado 4 do elemento 1
TPZGeoElBC(elg[1],4,-2,*firstmesh);
// engaste no lado 4 do elemento 2
TPZGeoElBC(elg[2],4,-2,*firstmesh);
// engaste no lado 4 do elemento 3
TPZGeoElBC(elg[3],4,-2,*firstmesh);
// imposicao do valor zero associado a condicao -2 (engaste)
bc = pl->CreateBC(-2,0,val1,val2);
secondmesh->InsertMaterialObject(bc);
// imposicao da condicao de simetria no lado 5 do elemento 4
val1(0,0)=big;
val1(1,1)=0.;
val1(2,2)=0.;
val1(3,3)=0.;
val1(4,4)=big;
val1(5,5)=big;
TPZGeoElBC(elg[3],5,-3,*firstmesh);
bc = pl->CreateBC(-3,2,val1,val2);
secondmesh->InsertMaterialObject(bc);
//ordem de interpolacao
int ord;
cout << "Entre ordem 1,2,3,4,5 : ";
cin >> ord;
// TPZCompEl::gOrder = ord;
firstmesh.SetDefaultOrder(order);
//construção malha computacional
TPZVec<int> csub(0);
TPZManVector<TPZGeoEl *> pv(4);
int n1=1,level=0;
cout << "\nDividir ate nivel ? ";
int resp;
cin >> resp;
int nelc = firstmesh->ElementVec().NElements();
int el;
TPZGeoEl *cpel;
for(el=0;el<firstmesh->ElementVec().NElements();el++) {
cpel = firstmesh->ElementVec()[el];
if(cpel && cpel->Level() < resp)
cpel->Divide(pv);
}
cout << "\nDividir o elemento esquerdo superior quantas vezes? ";
cin >> resp;
cpel = firstmesh->ElementVec()[0];
for(el=0; el<resp; el++) {
cpel->Divide(pv);
cpel = pv[3];
}
//analysis
secondmesh->AutoBuild();
firstmesh->Print(outgm1);
outgm1.flush();
secondmesh->AdjustBoundaryElements();
secondmesh->InitializeBlock();
secondmesh->Print(outcm1);
TPZAnalysis an(secondmesh,outcm1);
int numeq = secondmesh->NEquations();
secondmesh->Print(outcm1);
outcm1.flush();
TPZVec<int> skyline;
secondmesh->Skyline(skyline);
TPZSkylMatrix *stiff = new TPZSkylMatrix(numeq,skyline);
an.SetMatrix(stiff);
an.Solver().SetDirect(ECholesky);
secondmesh->SetName("Malha Computacional : Connects e Elementos");
// Posprocessamento
an.Run(outcm2);
TPZVec<char *> scalnames(5);
scalnames[0] = "Mn1";
scalnames[1] = "Mn2";
scalnames[2] = "Vn1";
scalnames[3] = "Vn2";
scalnames[4] = "Deslocz";
TPZVec<char *> vecnames(0);
char plotfile[] = "placaPos.pos";
char pltfile[] = "placaView.plt";
an.DefineGraphMesh(2, scalnames, vecnames, plotfile);
an.Print("FEM SOLUTION ",outcm1);
an.PostProcess(3);
an.DefineGraphMesh(2, scalnames, vecnames, pltfile);
an.PostProcess(2);
firstmesh->Print(outgm1);
outgm1.flush();
delete secondmesh;
delete firstmesh;
return 0;
}
//*************************************
//************Option 8*****************
//*****All element types Mesh**********
//*************************************
TPZCompMesh * CreateTestMesh() {
REAL nodeco[12][3] = {
{0.,0.,0.},
{1.,0.,0.},
{2.,0.,0.},
{0.,1.,0.},
{1.,1.,0.},
{2.,1.,0.},
{0.,0.,1.},
{1.,0.,1.},
{2.,0.,1.},
{0.,1.,1.},
{1.,1.,1.},
{2.,1.,1.}
};
int nodind[7][8] = {
{0,1,4,3,6,7,10,9},
{2,4,10,8,5},
{8,10,11,5},
{2,4,1,8,10,7},
{0,1},
{0,1,7,6},
{1,2,7}
};
int numnos[7] = {8,5,4,6,2,4,3};
TPZGeoMesh *gmesh = new TPZGeoMesh();
int noind[12];
int no;
for(no=0; no<12; no++) {
noind[no] = gmesh->NodeVec().AllocateNewElement();
TPZVec<REAL> coord(3);
coord[0] = nodeco[no][0];
coord[1] = nodeco[no][1];
coord[2] = nodeco[no][2];
gmesh->NodeVec()[noind[no]].Initialize(coord,*gmesh);
}
int matid = 1;
TPZVec<int> nodeindex;
int nel;
TPZVec<TPZGeoEl *> gelvec;
gelvec.Resize(4);
for(nel=0; nel<4; nel++) {
int in;
nodeindex.Resize(numnos[nel]);
for(in=0; in<numnos[nel]; in++) {
nodeindex[in] = nodind[nel][in];
}
int index;
switch(nel) {
case 0:
// elvec[el] = gmesh->CreateGeoElement(ECube,nodeindex,1,index);
// gelvec[nel]=new TPZGeoElC3d(nodeindex,matid,*gmesh);
break;
case 1:
gelvec[nel] = gmesh->CreateGeoElement(EPiramide,nodeindex,matid,index);
// gelvec[nel]=new TPZGeoElPi3d(nodeindex,matid,*gmesh);
break;
case 2:
gelvec[nel] = gmesh->CreateGeoElement(ETetraedro,nodeindex,matid,index);
// gelvec[nel]=new TPZGeoElT3d(nodeindex,matid,*gmesh);
break;
case 3:
// gelvec[nel]=new TPZGeoElPr3d(nodeindex,matid,*gmesh);
// gelvec[nel] = gmesh->CreateGeoElement(EPrisma,nodeindex,matid,index);
break;
case 4:
// gelvec[nel]=new TPZGeoEl1d(nodeindex,2,*gmesh);
break;
case 5:
// gelvec[nel]=new TPZGeoElQ2d(nodeindex,3,*gmesh);
break;
case 6:
// gelvec[nel]=new TPZGeoElT2d(nodeindex,3,*gmesh);
break;
default:
break;
}
}
gmesh->BuildConnectivity2();
//TPZVec<TPZGeoEl *> sub;
//elvec[0]->Divide(sub);
// elvec[1]->Divide(sub);
// elvec[2]->Divide(sub);
// TPZGeoElBC gbc;
// bc -1 -> Dirichlet
// TPZGeoElBC gbc1(gelvec[0],20,-1,*gmesh);
TPZGeoElBC gbc11(gelvec[1],14,-1,*gmesh);
// TPZGeoElBC gbc12(gelvec[3],15,-1,*gmesh);
// bc -2 -> Neumann at the right x==1
// TPZGeoElBC gbc2(gelvec[0],25,-2,*gmesh);
// TPZGeoElBC gbc21(gelvec[3],19,-2,*gmesh);
TPZGeoElBC gbc22(gelvec[2],10,-2,*gmesh);
TPZCompMesh *cmesh = new TPZCompMesh(gmesh);
TPZAutoPointer<TPZMaterial> mat;
// if(nstate == 3) {
mat = new TPZMaterialTest3D(1);
TPZFMatrix mp (3,1,0.);
TPZMaterialTest3D * mataux = dynamic_cast<TPZMaterialTest3D *> (mat.operator ->());
TPZMaterialTest3D::geq3=1;
mataux->SetMaterial(mp);
/* } else {
TPZMat2dLin *mat2d = new TPZMat2dLin(1);
int ist,jst;
TPZFMatrix xk(nstate,nstate,1.),xc(nstate,nstate,0.),xf(nstate,1,0.);
for(ist=0; ist<nstate; ist++) {
if(nstate != 1) xf(ist,0) = 1.;
for(jst=0; jst<nstate; jst++) {
if(ist != jst) xk(ist,jst) = 0.;
}
}
mat2d->SetMaterial(xk,xc,xf);
mat = mat2d;
}*/
TPZFMatrix val1(3,3,0.),val2(3,1,0.);
TPZAutoPointer<TPZMaterial> bc[2];
bc[0] = mat->CreateBC(mat,-1,0,val1,val2);
val2(0,0) = 1.;
bc[1] = mat->CreateBC(mat,-2,1,val1,val2);
cmesh->InsertMaterialObject(mat);
int i;
for(i=0; i<2; i++) cmesh->InsertMaterialObject(bc[i]);
gmesh->Print(cout);
cmesh->AutoBuild();
cmesh->AdjustBoundaryElements();
cmesh->CleanUpUnconnectedNodes();
gmesh->Print(cout);
return cmesh;
}
//malha multifisica para o metodo da dupla projecao
TPZCompMesh *MalhaMDP(TPZVec<TPZCompMesh *> meshvec,TPZGeoMesh * gmesh){
//Creating computational mesh for multiphysic elements
gmesh->ResetReference();
TPZCompMesh *mphysics = new TPZCompMesh(gmesh);
//criando material
int dim =2;
TPZMDPMaterial *material = new TPZMDPMaterial(1,dim);
//incluindo os dados do problema
REAL coefk = 1.;
material->SetParameters(coefk, 0.);
//solucao exata
TPZAutoPointer<TPZFunction<STATE> > solexata;
solexata = new TPZDummyFunction<STATE>(SolSuave);
material->SetForcingFunctionExact(solexata);
//funcao do lado direito da equacao do problema
TPZAutoPointer<TPZFunction<STATE> > force;
TPZDummyFunction<STATE> *dum;
dum = new TPZDummyFunction<STATE>(ForceSuave);
dum->SetPolynomialOrder(20);
force = dum;
material->SetForcingFunction(force);
//inserindo o material na malha computacional
TPZMaterial *mat(material);
mphysics->InsertMaterialObject(mat);
//Criando condicoes de contorno
TPZFMatrix<STATE> val1(2,2,0.), val2(2,1,0.);
int boundcond = dirichlet;
//BC -1
TPZMaterial * BCondD1 = material->CreateBC(mat, bc1,boundcond, val1, val2);
TPZAutoPointer<TPZFunction<REAL> > bcmatDirichlet1 = new TPZDummyFunction<REAL>(DirichletSuave);
BCondD1->SetForcingFunction(bcmatDirichlet1);
mphysics->InsertMaterialObject(BCondD1);
//BC -2
TPZMaterial * BCondD2 = material->CreateBC(mat, bc2,boundcond, val1, val2);
TPZAutoPointer<TPZFunction<REAL> > bcmatDirichlet2 = new TPZDummyFunction<REAL>(DirichletSuave);
BCondD2->SetForcingFunction(bcmatDirichlet2);
mphysics->InsertMaterialObject(BCondD2);
//BC -3
TPZMaterial * BCondD3 = material->CreateBC(mat, bc3,boundcond, val1, val2);
TPZAutoPointer<TPZFunction<REAL> > bcmatDirichlet3 = new TPZDummyFunction<REAL>(DirichletSuave);
BCondD3->SetForcingFunction(bcmatDirichlet3);
mphysics->InsertMaterialObject(BCondD3);
//BC -4
TPZMaterial * BCondD4 = material->CreateBC(mat, bc4,boundcond, val1, val2);
TPZAutoPointer<TPZFunction<REAL> > bcmatDirichlet4 = new TPZDummyFunction<REAL>(DirichletSuave);
BCondD4->SetForcingFunction(bcmatDirichlet4);
mphysics->InsertMaterialObject(BCondD4);
mphysics->InsertMaterialObject(BCondD1);
mphysics->InsertMaterialObject(BCondD2);
mphysics->InsertMaterialObject(BCondD3);
mphysics->InsertMaterialObject(BCondD4);
//set multiphysics element
mphysics->SetDimModel(dim);
mphysics->SetAllCreateFunctionsMultiphysicElem();
//Fazendo auto build
mphysics->AutoBuild();
mphysics->AdjustBoundaryElements();
mphysics->CleanUpUnconnectedNodes();
// Creating multiphysic elements into mphysics computational mesh
TPZBuildMultiphysicsMesh::AddElements(meshvec, mphysics);
TPZBuildMultiphysicsMesh::AddConnects(meshvec,mphysics);
TPZBuildMultiphysicsMesh::TransferFromMeshes(meshvec, mphysics);
return mphysics;
}
TPZCompMesh * CompMesh(TPZGeoMesh *gmesh, int porder)
{
/// criar materiais
int dim = gmesh->Dimension();
TPZCompMesh * cmesh = new TPZCompMesh(gmesh);
TPZMatLaplacian *material = new TPZMatLaplacian(1,dim);
// TPZAutoPointer<TPZFunction<REAL> > forcef = new TPZDummyFunction<REAL>(ForceSuave);
// material->SetForcingFunction(forcef);
TPZAutoPointer<TPZFunction<STATE> > force;
TPZDummyFunction<STATE> *dum;
dum = new TPZDummyFunction<STATE>(ForceSuave);
dum->SetPolynomialOrder(20);
force = dum;
material->SetForcingFunction(force);
TPZAutoPointer<TPZFunction<STATE> > solExata= new TPZDummyFunction<STATE>(SolSuave);
material->SetForcingFunctionExact(solExata);
TPZMaterial * mat(material);
cmesh->InsertMaterialObject(mat);
cmesh->SetDimModel(dim);
cmesh->SetDefaultOrder(porder);
///Inserir condicao de contorno
TPZFMatrix<STATE> val1(2,2,1.), val2(2,1,0.);
//BC -1
TPZMaterial * BCondD1 = material->CreateBC(mat, bc1,dirichlet, val1, val2);
TPZAutoPointer<TPZFunction<REAL> > bcmatDirichlet1 = new TPZDummyFunction<REAL>(DirichletSuave);
BCondD1->SetForcingFunction(bcmatDirichlet1);
cmesh->InsertMaterialObject(BCondD1);
//BC -2
TPZMaterial * BCondD2 = material->CreateBC(mat, bc2,dirichlet, val1, val2);
TPZAutoPointer<TPZFunction<REAL> > bcmatDirichlet2 = new TPZDummyFunction<REAL>(DirichletSuave);
BCondD2->SetForcingFunction(bcmatDirichlet2);
cmesh->InsertMaterialObject(BCondD2);
//BC -3
TPZMaterial * BCondD3 = material->CreateBC(mat, bc3,dirichlet, val1, val2);
TPZAutoPointer<TPZFunction<REAL> > bcmatDirichlet3 = new TPZDummyFunction<REAL>(DirichletSuave);
BCondD3->SetForcingFunction(bcmatDirichlet3);
cmesh->InsertMaterialObject(BCondD3);
//BC -4
TPZMaterial * BCondD4 = material->CreateBC(mat, bc4,dirichlet, val1, val2);
TPZAutoPointer<TPZFunction<REAL> > bcmatDirichlet4 = new TPZDummyFunction<REAL>(DirichletSuave);
BCondD4->SetForcingFunction(bcmatDirichlet4);
cmesh->InsertMaterialObject(BCondD4);
//Fazendo auto build
cmesh->SetAllCreateFunctionsContinuous();
cmesh->AutoBuild();
cmesh->AdjustBoundaryElements();
cmesh->CleanUpUnconnectedNodes();
return cmesh;
}
int main() {
//malha geometrica
TPZGeoMesh *firstmesh = new TPZGeoMesh;
firstmesh->SetName("Malha Geometrica : Nós e Elementos");
firstmesh->NodeVec().Resize(4);
TPZVec<REAL> coord(2),coordtrans(2);
REAL ct,st,PI=3.141592654;
cout << "\nEntre rotacao do eixo n1 (graus) -> ";
REAL g;
cin >> g;
g = g*PI/180.;
ct = cos(g);
st = sin(g);
//ct = 1.;
//st = 0.;
coord[0] = 0;
coord[1] = 0;
coordtrans[0] = ct*coord[0]-st*coord[1];
coordtrans[1] = st*coord[0]+ct*coord[1];
//nos geometricos
firstmesh->NodeVec()[0].Initialize(coordtrans,*firstmesh);
coord[0] = 5;
coordtrans[0] = ct*coord[0]-st*coord[1];
coordtrans[1] = st*coord[0]+ct*coord[1];
firstmesh->NodeVec()[1].Initialize(coordtrans,*firstmesh);
coord[0] = 5;
coord[1] = 5;
coordtrans[0] = ct*coord[0]-st*coord[1];
coordtrans[1] = st*coord[0]+ct*coord[1];
firstmesh->NodeVec()[2].Initialize(coordtrans,*firstmesh);
coord[0] = 0;
coordtrans[0] = ct*coord[0]-st*coord[1];
coordtrans[1] = st*coord[0]+ct*coord[1];
firstmesh->NodeVec()[3].Initialize(coordtrans,*firstmesh);
/*
TPZVec<int> nodeindexes(3);
nodeindexes[0] = 0;
nodeindexes[1] = 1;
nodeindexes[2] = 2;
//elementos geometricos
TPZGeoElT2d *elg0 = new TPZGeoElT2d(nodeindexes,1,*firstmesh);
nodeindexes[0] = 0;
nodeindexes[1] = 2;
nodeindexes[2] = 3;
TPZGeoElT2d *elg1 = new TPZGeoElT2d(nodeindexes,1,*firstmesh);
nodeindexes[0] = 0;
nodeindexes[1] = 1;
nodeindexes[2] = 2;
TPZGeoElT2d *elg2 = new TPZGeoElT2d(nodeindexes,2,*firstmesh);
nodeindexes[0] = 0;
nodeindexes[1] = 2;
nodeindexes[2] = 3;
TPZGeoElT2d *elg3 = new TPZGeoElT2d(nodeindexes,2,*firstmesh);
*/
TPZVec<int> nodeindexes(4);
nodeindexes[0] = 0;
nodeindexes[1] = 1;
nodeindexes[2] = 2;
nodeindexes[3] = 3;
//elementos geometricos
TPZGeoEl *elg0 = new TPZGeoElQ2d(nodeindexes,1,*firstmesh);
TPZGeoEl *elg1 = new TPZGeoElQ2d(nodeindexes,2,*firstmesh);
TPZGeoEl *elg2 = new TPZGeoElQ2d(nodeindexes,3,*firstmesh);
//Arquivos de saida
ofstream outgm1("outgm1.dat");
ofstream outcm1("outcm1.dat");
ofstream outcm2("outcm2.dat");
//montagem de conectividades entre elementos
firstmesh->BuildConnectivity();
//malha computacional
TPZCompMesh *secondmesh = new TPZCompMesh(firstmesh);
secondmesh->SetName("Malha Computacional : Conectividades e Elementos");
//material
TPZMaterial *pl = LerMaterial("placa1.dat");
secondmesh->InsertMaterialObject(pl);
pl = LerMaterial("placa2.dat");
secondmesh->InsertMaterialObject(pl);
pl = LerMaterial("placa3.dat");
secondmesh->InsertMaterialObject(pl);
//CC : condicões de contorno
TPZBndCond *bc;
REAL big = 1.e12;
TPZFMatrix val1(6,6,0.),val2(6,1,0.);
val1(0,0)=big;
val1(1,1)=big;
val1(2,2)=big;
val1(3,3)=0.;
val1(4,4)=0.;
val1(5,5)=0.;
TPZGeoElBC(elg0,5,-2,*firstmesh);
bc = pl->CreateBC(-2,2,val1,val2);
secondmesh->InsertMaterialObject(bc);
TPZGeoElBC(elg0,6,-3,*firstmesh);
bc = pl->CreateBC(-3,2,val1,val2);
secondmesh->InsertMaterialObject(bc);
val1(0,0)=0.;
val1(1,1)=big;
val1(2,2)=0.;
val1(3,3)=big;
val1(4,4)=0.;
val1(5,5)=0.;
TPZGeoElBC(elg0,4,-1,*firstmesh);
bc = pl->CreateBC(-1,2,val1,val2);
secondmesh->InsertMaterialObject(bc);
val1(0,0)=big;
val1(1,1)=0.;
val1(2,2)=0.;
val1(3,3)=0.;
val1(4,4)=big;
val1(5,5)=0.;
TPZGeoElBC(elg0,7,-4,*firstmesh);
bc = pl->CreateBC(-4,2,val1,val2);
secondmesh->InsertMaterialObject(bc);
//ordem de interpolacao
int ord;
cout << "Entre ordem 1,2,3,4,5 : ";
cin >> ord;
// TPZCompEl::gOrder = ord;
cmesh.SetDefaultOrder(ord);
//construção malha computacional
TPZVec<int> csub(0);
TPZManVector<TPZGeoEl *> pv(4);
int n1=1,level=0;
cout << "\nDividir ate nivel ? ";
int resp;
cin >> resp;
int nelc = firstmesh->ElementVec().NElements();
int el;
TPZGeoEl *cpel;
for(el=0;el<firstmesh->ElementVec().NElements();el++) {
cpel = firstmesh->ElementVec()[el];
if(cpel && cpel->Level() < resp)
cpel->Divide(pv);
}
//analysis
secondmesh->AutoBuild();
secondmesh->AdjustBoundaryElements();
secondmesh->InitializeBlock();
secondmesh->Print(outcm1);
TPZAnalysis an(secondmesh,outcm1);
int numeq = secondmesh->NEquations();
secondmesh->Print(outcm1);
outcm1.flush();
TPZVec<int> skyline;
secondmesh->Skyline(skyline);
TPZSkylMatrix *stiff = new TPZSkylMatrix(numeq,skyline);
an.SetMatrix(stiff);
an.Solver().SetDirect(ECholesky);
secondmesh->SetName("Malha Computacional : Connects e Elementos");
// Posprocessamento
an.Run(outcm2);
TPZVec<char *> scalnames(5);
scalnames[0] = "Mn1";
scalnames[1] = "Mn2";
scalnames[2] = "Sign1";
scalnames[3] = "Sign2";
scalnames[4] = "Deslocz";
TPZVec<char *> vecnames(0);
char plotfile[] = "placaPos.pos";
char pltfile[] = "placaView.plt";
an.DefineGraphMesh(2, scalnames, vecnames, plotfile);
an.Print("FEM SOLUTION ",outcm1);
an.PostProcess(2);
an.DefineGraphMesh(2, scalnames, vecnames, pltfile);
an.PostProcess(2);
firstmesh->Print(outgm1);
outgm1.flush();
delete secondmesh;
delete firstmesh;
return 0;
}
TPZCompMesh *TPZAdaptMesh::CreateCompMesh (TPZCompMesh *mesh, //malha a refinar
TPZVec<TPZGeoEl *> &gelstack, //
TPZVec<int> &porders) {
//Cria um ponteiro para a malha geom�trica de mesh
TPZGeoMesh *gmesh = mesh->Reference();
if(!gmesh) {
cout << "TPZAdaptMesh::CreateCompMesh encountered no geometric mesh\n";
return 0;
}
//Reseta as refer�ncias do ponteiro para a malha geom�trica criada
//e cria uma nova malha computacional baseada nesta malha geom�trica
gmesh->ResetReference();
TPZCompMesh *cmesh = new TPZCompMesh(gmesh);
// int nmat = mesh->MaterialVec().size();
// int m;
//Cria um clone do vetor de materiais da malha mesh
mesh->CopyMaterials(*cmesh);
/* for(m=0; m<nmat; m++) {
TPZMaterial * mat = mesh->MaterialVec()[m];
if(!mat) continue;
mat->Clone(cmesh->MaterialVec());
}
*/
//Idenifica o vetor de elementos computacionais de mesh
// TPZAdmChunkVector<TPZCompEl *> &elementvec = mesh->ElementVec();
int el,nelem = gelstack.NElements();
// cmesh->SetName("Antes PRefine");
// cmesh->Print(cout);
for(el=0; el<nelem; el++) {
//identifica os elementos geom�tricos passados em gelstack
TPZGeoEl *gel = gelstack[el];
if(!gel) {
cout << "TPZAdaptMesh::CreateCompMesh encountered an null element\n";
continue;
}
long celindex;
//Cria um TPZIntel baseado no gel identificado
TPZInterpolatedElement *csint;
csint = dynamic_cast<TPZInterpolatedElement *> (cmesh->CreateCompEl(gel,celindex));
if(!csint) continue;
//Refina em p o elemento criado
// cmesh->SetName("depois criar elemento");
// cmesh->Print(cout);
csint->PRefine(porders[el]);
// cmesh->SetName("depois prefine no elemento");
// cmesh->Print(cout);
}
#ifndef CLONEBCTOO
nelem = gmesh->NElements();
for (el=0; el<nelem; el++) {
TPZGeoEl *gel = gmesh->ElementVec()[el];
if (!gel || gel->Reference()) {
continue;
}
int matid = gel->MaterialId();
if (matid < 0) {
TPZStack<TPZCompElSide> celstack;
int ns = gel->NSides();
TPZGeoElSide gelside(gel,ns-1);
gelside.HigherLevelCompElementList2(celstack, 1, 1);
if (celstack.size()) {
TPZStack<TPZGeoEl *> subels;
gel->Divide(subels);
}
}
}
nelem = gmesh->NElements();
for (el=0; el<nelem; el++) {
TPZGeoEl *gel = gmesh->ElementVec()[el];
if (!gel || gel->Reference()) {
continue;
}
int matid = gel->MaterialId();
if (matid < 0) {
TPZStack<TPZCompElSide> celstack;
int ns = gel->NSides();
TPZGeoElSide gelside(gel,ns-1);
gelside.EqualLevelCompElementList(celstack, 1, 0);
if (celstack.size()) {
long index;
cmesh->CreateCompEl(gel, index);
}
}
}
#endif
//Mais einh!!
// cmesh->SetName("Antes Adjust");
// cmesh->Print(cout);
cmesh->AdjustBoundaryElements();
// cmesh->SetName("Depois");
// cmesh->Print(cout);
return cmesh;
}
TPZCompMesh *MalhaCompMultifisica(TPZGeoMesh * gmesh,TPZVec<TPZCompMesh *> meshvec, TPZMatUncoupledPoissonDisc* &mymaterial){
// Creating computational mesh for multiphysic elements
gmesh->ResetReference();
TPZCompMesh *mphysics = new TPZCompMesh(gmesh);
mphysics->SetAllCreateFunctionsMultiphysicElem();
int dim = 2;
mphysics->SetDimModel(dim);
mymaterial = new TPZMatUncoupledPoissonDisc(matId, mphysics->Dimension());
mymaterial->SetParameters(1., 1.);
mymaterial->SetInternalFlux(-8.,0.);
//mymaterial->SetInternalFlux(0.,0.);
mymaterial->SetNonSymmetricOne();
mymaterial->SetNonSymmetricTwo();
mymaterial->SetPenaltyConstant(0., 0.);
TPZMaterial * mat(mymaterial);
mphysics->InsertMaterialObject(mat);
TPZAutoPointer<TPZFunction<STATE> > forcef = new TPZDummyFunction<STATE>(ForcingF, 5);
//
// TPZAutoPointer<TPZFunction<STATE> > forcef = new TPZDummyFunction<STATE>(ForcingF);
mymaterial->SetForcingFunction(forcef);
///Inserir condicao de contorno
TPZFMatrix<STATE> val1(2,2,0.), val2(2,1,0.);
TPZMaterial * BCond0 = mymaterial->CreateBC(mat, bc0,neumann_dirichlet, val1, val2);
TPZMaterial * BCond2 = mymaterial->CreateBC(mat, bc2,neumann_dirichlet, val1, val2);
TPZMaterial * BCond1 = mymaterial->CreateBC(mat, bc1,dirichlet, val1, val2);
TPZMaterial * BCond3 = mymaterial->CreateBC(mat, bc3,dirichlet, val1, val2);
// TPZMaterial * BCond0 = mymaterial->CreateBC(mat, bc0,dirichlet, val1, val2);
// TPZMaterial * BCond2 = mymaterial->CreateBC(mat, bc2,dirichlet, val1, val2);
// TPZMaterial * BCond1 = mymaterial->CreateBC(mat, bc1,dirichlet, val1, val2);
// TPZMaterial * BCond3 = mymaterial->CreateBC(mat, bc3,dirichlet, val1, val2);
mphysics->InsertMaterialObject(BCond0);
mphysics->InsertMaterialObject(BCond1);
mphysics->InsertMaterialObject(BCond2);
mphysics->InsertMaterialObject(BCond3);
mphysics->AutoBuild();
mphysics->AdjustBoundaryElements();
mphysics->CleanUpUnconnectedNodes();
//Creating multiphysic elements into mphysics computational mesh
TPZBuildMultiphysicsMesh::AddElements(meshvec, mphysics);
TPZBuildMultiphysicsMesh::AddConnects(meshvec,mphysics);
TPZBuildMultiphysicsMesh::TransferFromMeshes(meshvec, mphysics);
mphysics->Reference()->ResetReference();
mphysics->LoadReferences();
if (disc_functions==true){
//criar elementos de interface
int nel = mphysics->ElementVec().NElements();
for(int el = 0; el < nel; el++)
{
TPZCompEl * compEl = mphysics->ElementVec()[el];
if(!compEl) continue;
int index = compEl ->Index();
if(compEl->Dimension() == mphysics->Dimension())
{
TPZMultiphysicsElement * InterpEl = dynamic_cast<TPZMultiphysicsElement *>(mphysics->ElementVec()[index]);
if(!InterpEl) continue;
InterpEl->CreateInterfaces();
}
}
}
return mphysics;
}