Esempio n. 1
0
File: conf.cpp Progetto: Adamiko/los
static QPair<int, QString> readMidiPortPreset(Xml& xml)/*{{{*/
{
    int id = 0;
    QString sysex;

    for (;;)
    {
        Xml::Token token = xml.parse();
        QString tag = xml.s1();
        switch (token)
        {
            case Xml::TagStart:
                xml.unknown("midiPreset");
                break;
            case Xml::Attribut:
                if (tag == "id")
                    id = xml.s2().toInt();
                else if (tag == "sysex")
                {
                    sysex = xml.s2();
                }
                break;
            case Xml::TagEnd:
                return qMakePair(id, sysex);
            default:
                break;
        }
    }
}/*}}}*/
Esempio n. 2
0
File: pos.cpp Progetto: faesong/oom
void PosLen::read(Xml& xml, const char* name)
{
    sn = -1;
    for (;;)
    {
        Xml::Token token = xml.parse();
        const QString& tag = xml.s1();
        switch (token)
        {
        case Xml::Error:
        case Xml::End:
            return;

        case Xml::TagStart:
            xml.unknown(name);
            break;

        case Xml::Attribut:
            if (tag == "tick")
            {
                setType(TICKS);
                setTick(xml.s2().toInt());
            }
            else if (tag == "sample")
            {
                setType(FRAMES);
                setFrame(xml.s2().toInt());
            }
            else if (tag == "len")
            {
                int n = xml.s2().toInt();
                switch (type())
                {
                case TICKS:
                    setLenTick(n);
                    break;
                case FRAMES:
                    setLenFrame(n);
                    break;
                }
            }
            else
                xml.unknown(name);
            break;

        case Xml::TagEnd:
            if (tag == name)
                return;
        default:
            break;
        }
    }
}
Esempio n. 3
0
File: conf.cpp Progetto: Adamiko/los
QColor readColor(Xml& xml)
{
    int val, r = 0, g = 0, b = 0;

    for (;;)
    {
        Xml::Token token = xml.parse();
        if (token != Xml::Attribut)
            break;
        QString tag = xml.s1();
        switch (token)
        {
            case Xml::Attribut:
                val = xml.s2().toInt();
                if (tag == "r")
                    r = val;
                else if (tag == "g")
                    g = val;
                else if (tag == "b")
                    b = val;
                break;
            default:
                break;
        }
    }

    return QColor(r, g, b);
}
Esempio n. 4
0
File: sig.cpp Progetto: faesong/oom
int SigEvent::read(Xml& xml)
{
	int at = 0;
	for (;;)
	{
		Xml::Token token = xml.parse();
		const QString& tag = xml.s1();
		switch (token)
		{
			case Xml::Error:
			case Xml::End:
				return 0;
			case Xml::TagStart:
				if (tag == "tick")
					tick = xml.parseInt();
				else if (tag == "nom")
					z = xml.parseInt();
				else if (tag == "denom")
					n = xml.parseInt();
				else
					xml.unknown("SigEvent");
				break;
			case Xml::Attribut:
				if (tag == "at")
					at = xml.s2().toInt();
				break;
			case Xml::TagEnd:
				if (tag == "sig")
					return at;
			default:
				break;
		}
	}
	return 0;
}
Esempio n. 5
0
void PatchGroup::read(Xml& xml)
      {
      for (;;) {
            Xml::Token token = xml.parse();
            const QString& tag = xml.s1();
            switch (token) {
                  case Xml::Error:
                  case Xml::End:
                        return;
                  case Xml::TagStart:
                        if (tag == "Patch") {
                              Patch* patch = new Patch;
                              patch->read(xml);
                              patches.push_back(patch);
                              }
                        else
                              xml.unknown("PatchGroup");
                        break;
                  case Xml::Attribut:
                        if (tag == "name")
                              name = xml.s2();
                        break;
                  case Xml::TagEnd:
                        if (tag == "PatchGroup")
                              return;
                  default:
                        break;
                  }
            }
      }
Esempio n. 6
0
int TEvent::read(Xml& xml)
{
	int at = 0;
	for (;;)
	{
		Xml::Token token = xml.parse();
		const QString& tag = xml.s1();
		switch (token)
		{
			case Xml::Error:
			case Xml::End:
				return 0;
			case Xml::TagStart:
				if (tag == "tick")
					tick = xml.parseInt();
				else if (tag == "val")
					tempo = xml.parseInt();
				else
					xml.unknown("TEvent");
				break;
			case Xml::Attribut:
				if (tag == "at")
					at = xml.s2().toInt();
				break;
			case Xml::TagEnd:
				if (tag == "tempo")
				{
					return at;
				}
			default:
				break;
		}
	}
	return 0;
}
Esempio n. 7
0
File: conf.cpp Progetto: Adamiko/los
static void readPortChannel(Xml& xml, int midiPort)
{
    int idx = 0; //torbenh
    for (;;)
    {
        Xml::Token token = xml.parse();
        if (token == Xml::Error || token == Xml::End)
            break;
        QString tag = xml.s1();
        switch (token)
        {
            case Xml::TagStart:
                if (tag == "controller")
                {
                    readController(xml, midiPort, idx);
                }
                else
                    xml.skip(tag);
                break;
            case Xml::Attribut:
                if (tag == "idx")
                    idx = xml.s2().toInt();
                break;
            case Xml::TagEnd:
                if (tag == "channel")
                    return;
            default:
                break;
        }
    }
}
Esempio n. 8
0
void AudioTrack::readAuxSend(Xml& xml)
{
	qint64 idx;
	double val;
	bool pre = true;
	for (;;)
	{
		Xml::Token token = xml.parse();
		const QString& tag = xml.s1();
		switch (token)
		{
			case Xml::Error:
			case Xml::End:
				return;
			case Xml::Attribut:
			{
				if (tag == "idx")
				{//Backwards compatible
					idx = xml.s2().toLongLong();
					gUpdateAuxes = true;
				}
				else if(tag == "trackId")
				{//New style trackId based
					idx = xml.s2().toLongLong();
				}
				else if(tag == "pre")
				{
					pre = xml.s2().toInt();
				}
				break;
			}
			case Xml::Text:
				val = tag.toDouble();
				break;
			case Xml::TagEnd:
				if (xml.s1() == "auxSend")
				{
					AuxInfo info(pre, val);
					_auxSend[idx] = info;
					return;
				}
			default:
				break;
		}
	}
}
Esempio n. 9
0
File: pos.cpp Progetto: faesong/oom
void Pos::read(Xml& xml, const char* name)
{
    sn = -1;
    for (;;)
    {
        Xml::Token token = xml.parse();
        const QString& tag = xml.s1();
        switch (token)
        {
        case Xml::Error:
        case Xml::End:
            return;

        case Xml::TagStart:
            xml.unknown(name);
            break;

        case Xml::Attribut:
            if (tag == "tick")
            {
                _tick = xml.s2().toInt();
                _type = TICKS;
            }
            else if (tag == "frame")
            {
                _frame = xml.s2().toInt();
                _type = FRAMES;
            }
            else if (tag == "sample")
            {   // obsolete
                _frame = xml.s2().toInt();
                _type = FRAMES;
            }
            else
                xml.unknown(name);
            break;

        case Xml::TagEnd:
            if (tag == name)
                return;
        default:
            break;
        }
    }
}
Esempio n. 10
0
void MidiEventBase::read(Xml& xml)
{
	setType(Note);
	a = 0;
	b = 0;
	c = 0;

	int dataLen = 0;
	for (;;)
	{
		Xml::Token token = xml.parse();
		const QString& tag = xml.s1();
		switch (token)
		{
			case Xml::Error:
			case Xml::End:
				return;
			case Xml::TagStart:
				xml.unknown("Event");
				break;
			case Xml::Text:
			{
				QByteArray ba = tag.toLatin1();
				const char*s = ba.constData();
				edata.data = new unsigned char[dataLen];
				edata.dataLen = dataLen;
				unsigned char* d = edata.data;
				for (int i = 0; i < dataLen; ++i)
				{
					char* endp;
					*d++ = strtol(s, &endp, 16);
					s = endp;
				}
			}
				break;
			case Xml::Attribut:
				if (tag == "tick")
					setTick(xml.s2().toInt());
				else if (tag == "type")
					setType(EventType(xml.s2().toInt()));
				else if (tag == "len")
					setLenTick(xml.s2().toInt());
				else if (tag == "a")
					a = xml.s2().toInt();
				else if (tag == "b")
					b = xml.s2().toInt();
				else if (tag == "c")
					c = xml.s2().toInt();
				else if (tag == "datalen")
					dataLen = xml.s2().toInt();
				break;
			case Xml::TagEnd:
				if (tag == "event")
					return;
			default:
				break;
		}
	}
}
Esempio n. 11
0
patch_collection_t MidiInstrument::readDrummapsEntryPatchCollection(Xml& xml)
{
  int first_prog=0, last_prog=256;   // this means:
  int first_lbank=0, last_lbank=256; // "does not matter"
  int first_hbank=0, last_hbank=256;

  for (;;)
  {
    Xml::Token token = xml.parse();
    const QString& tag = xml.s1();
    switch (token)
    {
      case Xml::Error:
      case Xml::End:
        return patch_collection_t(-1,-1,-1,-1,-1,-1); // an invalid collection

      case Xml::TagStart:
        xml.unknown("MidiInstrument::readDrummapsEntryPatchCollection");
        break;

      case Xml::Attribut:
        if (tag == "prog")
          parse_range(xml.s2(), &first_prog, &last_prog);
        else if (tag == "lbank")
          parse_range(xml.s2(), &first_lbank, &last_lbank);
        else if (tag == "hbank")
          parse_range(xml.s2(), &first_hbank, &last_hbank);
        break;

      case Xml::TagEnd:
        if (tag == "patch_collection")
          return patch_collection_t(first_prog, last_prog, first_lbank, last_lbank, first_hbank, last_hbank);

      default:
        break;
    }
  }

  printf("ERROR: THIS CANNOT HAPPEN: exited infinite loop in MidiInstrument::readDrummapsEntryPatchCollection()!\n"
         "                           not returning anything. expect undefined behaviour or even crashes.\n");
}
Esempio n. 12
0
void KeyMap::read(Xml& xml)/*{{{*/
{
    program = -1;
    pname = "";
    comment = "";
    key = -1;
    hasProgram = false;
    for (;;)
    {
        Xml::Token token = xml.parse();
        const QString& tag = xml.s1();
        switch (token)
        {
            case Xml::Error:
            case Xml::End:
                return;
            case Xml::TagStart:
                xml.unknown("KeyMap");
                break;
            case Xml::Attribut:
                if (tag == "comment")
                    comment = xml.s2();
                else if (tag == "program")
                    program = xml.s2().toInt();
                else if (tag == "key")
                    key = xml.s2().toInt();
                else if (tag == "pname")
                    pname = xml.s2();
                else if(tag == "hasProgram")
                    hasProgram = (bool)xml.s2().toInt();
                break;
            case Xml::TagEnd:
                if (tag == "KeyMap")
                    return;
            default:
                break;
        }
    }
}/*}}}*/
Esempio n. 13
0
File: conf.cpp Progetto: Adamiko/los
void readGlobalInput(Xml& xml)/*{{{*/
{
    QString name;
    int type;
    for (;;)
    {
        Xml::Token token = xml.parse();
        const QString& tag = xml.s1();
        switch (token)
        {
            case Xml::Error:
            case Xml::End:
                return;
            case Xml::TagStart:
                break;
            case Xml::Attribut:
                if(tag == "deviceType")
                {
                    type = xml.s2().toInt();
                }
                else if(tag == "deviceName")
                {
                    name = xml.s2();
                }
                break;
            case Xml::TagEnd:
                if(tag == "globalInput")
                {
                    if(debugMsg)
                        qDebug("readGlobalInput: Adding My Input to list: Type: %d, Name: %s", type,  name.toUtf8().constData());
                    gInputList.append(qMakePair(type, name));
                    return;
                }
            default:
                break;
        }
    }
}/*}}}*/
Esempio n. 14
0
bool SysEx::read(Xml& xml)
      {
      for (;;) {
            Xml::Token token = xml.parse();
            const QString& tag = xml.s1();
            switch (token) {
                  case Xml::Error:
                  case Xml::End:
                        return false;
                  case Xml::TagStart:
                        if (tag == "comment")
                              comment = xml.parse1();
                        else if (tag == "data")
                        {
                              unsigned char*d;
                              int len = string2sysex(xml.parse1(), &d);
                              // Was the conversion succesful, even if empty?
                              if(len != -1)
                              {
                                // Delete existing.
                                if(dataLen != 0 && data)
                                  delete[] data;
                                dataLen = len;
                                data = d;
                              }
                        }
                        else
                              xml.unknown("SysEx");
                        break;
                  case Xml::Attribut:
                        if (tag == "name")
                              name = xml.s2();
                        break;
                  case Xml::TagEnd:
                        if (tag == "SysEx")
                        {
                          return !name.isEmpty();
                        }
                  default:
                        break;
                  }
            }

      return false;
      }
Esempio n. 15
0
void TempoList::read(Xml& xml)
{
	for (;;)
	{
		Xml::Token token = xml.parse();
		const QString& tag = xml.s1();
		switch (token)
		{
			case Xml::Error:
			case Xml::End:
				return;
			case Xml::TagStart:
				if (tag == "tempo")
				{
					TEvent* t = new TEvent();
					unsigned tick = t->read(xml);
					iTEvent pos = find(tick);
					if (pos != end())
						erase(pos);
					insert(std::pair<const int, TEvent*> (tick, t));
				}
				else if (tag == "globalTempo")
					_globalTempo = xml.parseInt();
				else
					xml.unknown("TempoList");
				break;
			case Xml::Attribut:
				if (tag == "fix")
					_tempo = xml.s2().toInt();
				break;
			case Xml::TagEnd:
				if (tag == "tempolist")
				{
					normalize();
					++_tempoSN;
					return;
				}
			default:
				break;
		}
	}
}
Esempio n. 16
0
void MidiInstrument::readMidiState(Xml& xml)
{
  // A kludge to support old midistates by wrapping them in the proper header.
  _tmpMidiStateVersion = 1;    // Assume old (unmarked) first version 1.
  for (;;)
  {
    Xml::Token token = xml.parse();
    const QString tag = xml.s1();
    switch (token)
    {
          case Xml::Error:
          case Xml::End:
                return;
          case Xml::TagStart:
                if (tag == "event")
                {
                  Event e(Note);
                  e.read(xml);
                  _midiState->add(e);
                }
                else
                xml.unknown("midistate");
                break;
          case Xml::Attribut:
                if(tag == "version")
                  _tmpMidiStateVersion = xml.s2().toInt();
                else
                  xml.unknown("MidiInstrument");
                break;
          case Xml::TagEnd:
                if(tag == "midistate")
                  return;
          default:
                break;
    }
  }
}
Esempio n. 17
0
File: conf.cpp Progetto: Adamiko/los
QRect readGeometry(Xml& xml, const QString& name)
{
    QRect r(0, 0, 50, 50);
    int val;

    for (;;)
    {
        Xml::Token token = xml.parse();
        if (token == Xml::Error || token == Xml::End)
            break;
        QString tag = xml.s1();
        switch (token)
        {
            case Xml::TagStart:
                xml.parse1();
                break;
            case Xml::Attribut:
                val = xml.s2().toInt();
                if (tag == "x")
                    r.setX(val);
                else if (tag == "y")
                    r.setY(val);
                else if (tag == "w")
                    r.setWidth(val);
                else if (tag == "h")
                    r.setHeight(val);
                break;
            case Xml::TagEnd:
                if (tag == name)
                    return r;
            default:
                break;
        }
    }
    return r;
}
Esempio n. 18
0
File: conf.cpp Progetto: Adamiko/los
static void readController(Xml& xml, int midiPort, int channel)
{
    int id = 0;
    int val = CTRL_VAL_UNKNOWN;

    for (;;)
    {
        Xml::Token token = xml.parse();
        QString tag = xml.s1();
        switch (token)
        {
            case Xml::TagStart:
                if (tag == "val")
                    val = xml.parseInt();
                else
                    xml.skip(tag);
                break;
            case Xml::Attribut:
                if (tag == "id")
                    id = xml.s2().toInt();
                break;
            case Xml::TagEnd:
                if (tag == "controller")
                {
                    MidiPort* port = &midiPorts[midiPort];
                    //port->addManagedController(channel, id);
                    val = port->limitValToInstrCtlRange(id, val);
                    // The value here will actually be sent to the device LATER, in MidiPort::setMidiDevice()
                    port->setHwCtrlState(channel, id, val);
                    return;
                }
            default:
                return;
        }
    }
}
Esempio n. 19
0
void Patch::read(Xml& xml)
      {
      //typ   = -1;
      hbank = -1;
      lbank = -1;
      prog  = 0;
      drum  = false;
      for (;;) {
            Xml::Token token = xml.parse();
            const QString& tag = xml.s1();
            switch (token) {
                  case Xml::Error:
                  case Xml::End:
                        return;
                  case Xml::TagStart:
                        xml.unknown("Patch");
                        break;
                  case Xml::Attribut:
                        if (tag == "name")
                              name = xml.s2();
                        else if (tag == "mode")  // Obsolete
                        {
                              //typ = xml.s2().toInt();
                              xml.s2().toInt();
                        }
                        else if (tag == "hbank")
                              hbank = xml.s2().toInt();
                        else if (tag == "lbank")
                              lbank = xml.s2().toInt();
                        else if (tag == "prog")
                              prog = xml.s2().toInt();
                        else if (tag == "drum")
                              drum = xml.s2().toInt();
                        break;
                  case Xml::TagEnd:
                        if (tag == "Patch")
                              return;
                  default:
                        break;
                  }
            }
      }
Esempio n. 20
0
void CtrlList::read(Xml& xml)
{
    QLocale loc = QLocale::c();
    bool ok;
    for (;;)
    {
        Xml::Token token = xml.parse();
        const QString& tag = xml.s1();
        switch (token)
        {
            case Xml::Error:
            case Xml::End:
                return;
            case Xml::Attribut:
                if (tag == "id")
                {
                    _id = loc.toInt(xml.s2(), &ok);
                    if (!ok)
                    {
                        printf("CtrlList::read failed reading _id string: %s\n", xml.s2().toLatin1().constData());
                        initColor(0); //Set the default color if we have an error
                    }
                    else {
                        initColor(_id);
                    }
                }
                else if (tag == "cur")
                {
                    _curVal = loc.toDouble(xml.s2(), &ok);
                    if (!ok)
                        printf("CtrlList::read failed reading _curVal string: %s\n", xml.s2().toLatin1().constData());
                }
                else if(tag == "visible")
                {
                    _visible = (bool)xml.s2().toInt();
                }
                else if(tag == "color")
                {
                    ;//xml.skip(tag);
                }
                else
                    printf("unknown tag %s\n", tag.toLatin1().constData());
                break;
            case Xml::Text:
            {
                int len = tag.length();
                int frame;
                double val;

                int i = 0;
                for (;;)
                {
                    while (i < len && (tag[i] == ',' || tag[i] == ' ' || tag[i] == '\n'))
                        ++i;
                    if (i == len)
                        break;

                    QString fs;
                    while (i < len && tag[i] != ' ')
                    {
                        fs.append(tag[i]);
                        ++i;
                    }
                    if (i == len)
                        break;

                    // Works OK, but only because if current locale fails it falls back on 'C' locale.
                    // So, let's skip the fallback and force use of 'C' locale.
                    frame = loc.toInt(fs, &ok);
                    if (!ok)
                    {
                        printf("CtrlList::read failed reading frame string: %s\n", fs.toLatin1().constData());
                        break;
                    }

                    while (i < len && (tag[i] == ' ' || tag[i] == '\n'))
                        ++i;
                    if (i == len)
                        break;

                    QString vs;
                    while (i < len && tag[i] != ' ' && tag[i] != ',')
                    {
                        vs.append(tag[i]);
                        ++i;
                    }

                    // Works OK, but only because if current locale fails it falls back on 'C' locale.
                    // So, let's skip the fallback and force use of 'C' locale.
                    //val = vs.toDouble(&ok);
                    val = loc.toDouble(vs, &ok);
                    if (!ok)
                    {
                        printf("CtrlList::read failed reading value string: %s\n", vs.toLatin1().constData());
                        break;
                    }

                    //printf("CtrlList::read i:%d len:%d fs:%s frame %d: vs:%s val %f \n", i, len, fs.toLatin1().constData(), frame, vs.toLatin1().constData(), val);

                    add(frame, val);

                    if (i == len)
                        break;
                }
            }
                break;
            case Xml::TagEnd:
                if (xml.s1() == "controller")
                {
                    return;
                }
            default:
                break;
        }
    }
}
Esempio n. 21
0
void MidiController::read(Xml& xml)
      {
      ControllerType t = Controller7;
      _initVal = CTRL_VAL_UNKNOWN;
      static const int NOT_SET = 0x100000;
      _minVal  = NOT_SET;
      _maxVal  = NOT_SET;
      int h    = 0;
      int l    = 0;
      bool     ok;
      int base = 10;

      for (;;) {
            Xml::Token token = xml.parse();
            const QString& tag = xml.s1();
            switch (token) {
                  case Xml::Error:
                  case Xml::End:
                        return;
                  case Xml::Attribut:
                        {
                        QString s = xml.s2();
                        if (s.left(2) == "0x")
                              base = 16;
                        if (tag == "name")
                              _name = xml.s2();
                        else if (tag == "type")
                              t = ctrlType2Int(xml.s2());
                        else if (tag == "h")
                              h = xml.s2().toInt(&ok, base);
                        else if (tag == "l") {
                              // Support instrument files with '*' or 'pitch' as wildcard.
                              if ((xml.s2() == "*") || (xml.s2() == "pitch"))
                                    l = 0xff;
                              else
                                    l = xml.s2().toInt(&ok, base);
                              }
                        else if (tag == "min")
                              _minVal = xml.s2().toInt(&ok, base);
                        else if (tag == "max")
                              _maxVal = xml.s2().toInt(&ok, base);
                        else if (tag == "init")
                              _initVal = xml.s2().toInt(&ok, base);
                        else if (tag == "showType")
                              _showInTracks = xml.s2().toInt(&ok, base);
                        }
                        break;
                  case Xml::TagStart:
                        xml.unknown("MidiController");
                        break;
                  case Xml::TagEnd:
                        if (tag == "Controller") {
                              _num = (h << 8) + l;
                              switch (t) {
                                    case RPN:
                                          if (_maxVal == NOT_SET)
                                                _maxVal = 127;
                                          _num |= CTRL_RPN_OFFSET;
                                          break;
                                    case NRPN:
                                          if (_maxVal == NOT_SET)
                                                _maxVal = 127;
                                          _num |= CTRL_NRPN_OFFSET;
                                          break;
                                    case Controller7:
                                          if (_maxVal == NOT_SET)
                                                _maxVal = 127;
                                          break;
                                    case Controller14:
                                          _num |= CTRL_14_OFFSET;
                                          if (_maxVal == NOT_SET)
                                                _maxVal = 16383;
                                          break;
                                    case RPN14:
                                          if (_maxVal == NOT_SET)
                                                _maxVal = 16383;
                                          _num |= CTRL_RPN14_OFFSET;
                                          break;
                                    case NRPN14:
                                          if (_maxVal == NOT_SET)
                                                _maxVal = 16383;
                                          _num |= CTRL_NRPN14_OFFSET;
                                          break;
                                    case Pitch:
                                          if (_maxVal == NOT_SET)
                                                _maxVal = 8191;
                                          if (_minVal == NOT_SET)
                                                _minVal = -8192;
                                          _num = CTRL_PITCH;
                                          break;
                                    case Program:
                                          if (_maxVal == NOT_SET)
                                                _maxVal = 0xffffff;
                                          _num = CTRL_PROGRAM;
                                          break;
                                    case PolyAftertouch:   
                                          if (_maxVal == NOT_SET)
                                                _maxVal = 127;
                                          if (_minVal == NOT_SET)
                                                _minVal = 0;
                                          _num = CTRL_POLYAFTER;
                                          break;
                                    case Aftertouch:       
                                          if (_maxVal == NOT_SET)
                                                _maxVal = 127;
                                          if (_minVal == NOT_SET)
                                                _minVal = 0;
                                          _num = CTRL_AFTERTOUCH;
                                          break;
                                    case Velo:        // cannot happen
                                          break;
                                    }
                              if (_minVal == NOT_SET)
                                    _minVal = 0;
                              updateBias();
                              return;
                              }
                  default:
                        break;
                  }
            }
      }
Esempio n. 22
0
void MidiAudioCtrlMap::read(Xml& xml)
      {
      int port = -1, chan = -1, midi_ctrl = -1;
      MidiAudioCtrlStruct macs(-1);
      
      QLocale loc = QLocale::c();
      bool ok;
      int errcount = 0;
      for (;;) {
            Xml::Token token = xml.parse();
            const QString& tag = xml.s1();
            switch (token) {
                  case Xml::Error:
                  case Xml::End:
                        return;
                  case Xml::Attribut:
                        if (tag == "port")
                        {
                              port = loc.toInt(xml.s2(), &ok);
                              if(!ok)
                              { 
                                ++errcount;
                                printf("MidiAudioCtrlPortMap::read failed reading port string: %s\n", xml.s2().toLatin1().constData());
                              }
                        }
                        else if (tag == "ch")
                        {
                              chan = loc.toInt(xml.s2(), &ok);
                              if(!ok)
                              {
                                ++errcount;
                                printf("MidiAudioCtrlPortMap::read failed reading ch string: %s\n", xml.s2().toLatin1().constData());
                              }
                        }        
                        else if (tag == "mctrl")
                        {
                              midi_ctrl = loc.toInt(xml.s2(), &ok);
                              if(!ok)
                              {
                                ++errcount;
                                printf("MidiAudioCtrlPortMap::read failed reading mctrl string: %s\n", xml.s2().toLatin1().constData());
                              } 
                        }
                        else if (tag == "actrl")
                        {
                              macs.setAudioCtrlId(loc.toInt(xml.s2(), &ok));
                              if(!ok)
                              {
                                ++errcount;
                                printf("MidiAudioCtrlPortMap::read failed reading actrl string: %s\n", xml.s2().toLatin1().constData());
                              }
                        }
                        else
                              printf("unknown tag %s\n", tag.toLatin1().constData());
                        break;
                  case Xml::TagStart:
                        // TODO
                        //if (tag == "???") {  
                        //      }
                        //else
                              xml.unknown("midiMapper");
                        break;
                  case Xml::TagEnd:
                        if (xml.s1() == "midiMapper")
                        {
                              if(errcount == 0 && port != -1 && chan != -1 && midi_ctrl != -1 && macs.audioCtrlId() != -1)
                                  add_ctrl_struct(port, chan, midi_ctrl, macs);
                              return;
                        }
                  default:
                        break;
                  }
            }
      }
Esempio n. 23
0
void CtrlList::read(Xml& xml)
      {
      QLocale loc = QLocale::c();
      bool ok;
      for (;;) {
            Xml::Token token = xml.parse();
            const QString& tag = xml.s1();
            switch (token) {
                  case Xml::Error:
                  case Xml::End:
                        return;
                  case Xml::Attribut:
                        if (tag == "id")
                        {
                              _id = loc.toInt(xml.s2(), &ok);
                              if(!ok)
                                printf("CtrlList::read failed reading _id string: %s\n", xml.s2().toLatin1().constData());
                        }
                        else if (tag == "cur")
                        {
                              _curVal = loc.toDouble(xml.s2(), &ok);
                              if(!ok)
                                printf("CtrlList::read failed reading _curVal string: %s\n", xml.s2().toLatin1().constData());
                        }        
                        else if (tag == "visible")
                        {
                              _visible = loc.toInt(xml.s2(), &ok);
                              if(!ok)
                                printf("CtrlList::read failed reading _visible string: %s\n", xml.s2().toLatin1().constData());
                        }
                        else if (tag == "color")
                        {
#if QT_VERSION >= 0x040700
                              ok = _displayColor.isValidColor(xml.s2());
                              if (!ok) {
                                printf("CtrlList::read failed reading color string: %s\n", xml.s2().toLatin1().constData());
                                break;
                              }
#endif
                              _displayColor.setNamedColor(xml.s2());
                        }
                        else
                              printf("unknown tag %s\n", tag.toLatin1().constData());
                        break;
                  case Xml::Text:
                        {
                          int len = tag.length();
                          int frame;
                          double val;
  
                          int i = 0;
                          for(;;) 
                          {
                                while(i < len && (tag[i] == ',' || tag[i] == ' ' || tag[i] == '\n'))
                                  ++i;
                                if(i == len)
                                      break;
                                
                                QString fs;
                                while(i < len && tag[i] != ' ')
                                {
                                  fs.append(tag[i]); 
                                  ++i;
                                }
                                if(i == len)
                                      break;
                                
                                frame = loc.toInt(fs, &ok);
                                if(!ok)
                                {
                                  printf("CtrlList::read failed reading frame string: %s\n", fs.toLatin1().constData());
                                  break;
                                }
                                  
                                while(i < len && (tag[i] == ' ' || tag[i] == '\n'))
                                  ++i;
                                if(i == len)
                                      break;
                                
                                QString vs;
                                while(i < len && tag[i] != ' ' && tag[i] != ',')
                                {
                                  vs.append(tag[i]); 
                                  ++i;
                                }
                                
                                val = loc.toDouble(vs, &ok);
                                if(!ok)
                                {
                                  printf("CtrlList::read failed reading value string: %s\n", vs.toLatin1().constData());
                                  break;
                                }
                                  
                                add(frame, val);
                                
                                if(i == len)
                                      break;
                          }
                        }
                        break;
                  case Xml::TagEnd:
                        if (xml.s1() == "controller")
                              return;
                  default:
                        break;
                  }
            }
      }
Esempio n. 24
0
File: route.cpp Progetto: 87maxi/oom
void Song::readRoute(Xml& xml)/*{{{*/
{
	QString src;
	QString dst;
	int ch = -1;
	int chs = -1;
	int remch = -1;

	Route sroute, droute;

	for (;;)
	{
		const QString& tag = xml.s1();
		Xml::Token token = xml.parse();
		switch (token)
		{
			case Xml::Error:
			case Xml::End:
				return;
			case Xml::TagStart:
				if (tag == "source")
				{
					sroute.read(xml);
					sroute.channel = ch;
					sroute.channels = chs;
					sroute.remoteChannel = remch;
				}
				else if (tag == "dest")
				{
					droute.read(xml);
					droute.channel = ch;
					droute.channels = chs;
					droute.remoteChannel = remch;
				}
				else
					xml.unknown("readRoute");
				break;
			case Xml::Attribut:
#ifdef ROUTE_DEBUG
				printf("Song::readRoute(): attribute:%s\n", tag.toLatin1().constData());
#endif
				if (tag == "channel")
					ch = xml.s2().toInt();
				else
					if (tag == "channels")
					chs = xml.s2().toInt();
				else
					if (tag == "remch")
					remch = xml.s2().toInt();
				else
					if (tag == "channelMask") // p3.3.50 New channel mask for midi port-track routes.
					ch = xml.s2().toInt();
				else
					printf("Song::readRoute(): unknown attribute:%s\n", tag.toLatin1().constData());
				break;
			case Xml::TagEnd:
				if (xml.s1() == "Route")
				{
					if (sroute.isValid() && droute.isValid())// Support new routes.
					{
						// p3.3.49 Support pre- 1.1-RC2 midi-device-to-track routes. Obsolete. Replaced with midi port routes.
						if (sroute.type == Route::MIDI_DEVICE_ROUTE && droute.type == Route::TRACK_ROUTE)
						{
							if (sroute.device->midiPort() >= 0 && sroute.device->midiPort() < MIDI_PORTS
									&& ch >= 0 && ch < MIDI_CHANNELS)
							{
								sroute.midiPort = sroute.device->midiPort();
								sroute.device = 0;
								sroute.type = Route::MIDI_PORT_ROUTE;

								sroute.channel = 1 << ch; // p3.3.50  Convert to new bit-wise channel mask.
								droute.channel = sroute.channel;

								addRoute(sroute, droute);
							}
							else
								printf("  Warning - device:%s to track route, no device midi port or chan:%d out of range. Ignoring route!\n",
									sroute.device->name().toLatin1().constData(), ch);
						}
						else if (sroute.type == Route::TRACK_ROUTE && droute.type == Route::MIDI_DEVICE_ROUTE)
						{
							if (droute.device->midiPort() >= 0 && droute.device->midiPort() < MIDI_PORTS
									&& ch >= 0 && ch < MIDI_CHANNELS) // p3.3.50
							{
								droute.midiPort = droute.device->midiPort();
								droute.device = 0;
								droute.type = Route::MIDI_PORT_ROUTE;

								droute.channel = 1 << ch; // p3.3.50  Convert to new bit-wise channel mask.
								sroute.channel = droute.channel;

								addRoute(sroute, droute);
							}
							else
								printf("  Warning - track to device:%s route, no device midi port or chan:%d out of range. Ignoring route!\n",
									droute.device->name().toLatin1().constData(), ch);
						}
						else
						{
							//printf("adding new route...\n");
							addRoute(sroute, droute);
						}
					}
					else
						printf("  Warning - route invalid. Ignoring route! srcValid: %d, destValid: %d\n", 
								sroute.isValid(), droute.isValid());

					return;
				}
			default:
				break;
		}
	}
}/*}}}*/
Esempio n. 25
0
void Patch::read(Xml& xml)/*{{{*/
{
    typ = -1;
    hbank = -1;
    lbank = -1;
    prog = 0;
    drum = false;
    keys.clear();
    keyswitches.clear();
    loadmode = -1;
    index = -1;
    volume = 1.0;
    for (;;)
    {
        Xml::Token token = xml.parse();
        const QString& tag = xml.s1();
        switch (token)
        {
            case Xml::Error:
            case Xml::End:
                return;
            case Xml::TagStart:
                xml.unknown("Patch");
                break;
            case Xml::Attribut:
                if (tag == "name")
                    name = xml.s2();
                else if (tag == "mode")
                    typ = xml.s2().toInt();
                else if (tag == "hbank")
                    hbank = xml.s2().toInt();
                else if (tag == "lbank")
                    lbank = xml.s2().toInt();
                else if (tag == "prog")
                    prog = xml.s2().toInt();
                else if (tag == "drum")
                    drum = xml.s2().toInt();
                else if(tag == "keys")
                {
                    QStringList klist = ((QString)xml.s2()).split(QString(" "), QString::SkipEmptyParts);
                    for (QStringList::Iterator it = klist.begin(); it != klist.end(); ++it)
                    {
                        int val = (*it).toInt();
                        keys.append(val);
                    }
                }
                else if(tag == "keyswitches")
                {
                    QStringList klist = ((QString)xml.s2()).split(QString(" "), QString::SkipEmptyParts);
                    for (QStringList::Iterator it = klist.begin(); it != klist.end(); ++it)
                    {
                        int val = (*it).toInt();
                        keyswitches.append(val);
                    }
                }
                else if(tag == "comments")
                {
                    QStringList clist = ((QString)xml.s2()).split(QString(" "), QString::SkipEmptyParts);
                    for (QStringList::Iterator it = clist.begin(); it != clist.end(); ++it)
                    {
                        QStringList hashlist = ((*it)).split(QString("@@:@@"), QString::SkipEmptyParts);
                        if(hashlist.size() == 2)
                        {
                            int k = hashlist.at(0).toInt();
                            comments[k] = hashlist.at(1);
                        }
                    }
                }
                else if(tag == "engine")
                {
                    engine = xml.s2();
                }
                else if(tag == "filename")
                {
                    filename = xml.s2();
                }
                else if(tag == "loadmode")
                {
                    loadmode = xml.s2().toInt();
                }
                else if(tag == "volume")
                {
                    volume = xml.s2().toFloat();
                }
                else if(tag == "index")
                {
                    index = xml.s2().toInt();
                }
                break;
            case Xml::TagEnd:
                if (tag == "Patch")
                    return;
            default:
                break;
        }
    }
}/*}}}*/
Esempio n. 26
0
void MidiInstrument::read(Xml& xml)
{
    bool ok;
    int base = 10;
    _nullvalue = -1;
    m_keymaps.clear();
    for (;;)
    {
        Xml::Token token = xml.parse();
        const QString& tag = xml.s1();
        switch (token)
        {
            case Xml::Error:
            case Xml::End:
                return;
            case Xml::TagStart:
                if (tag == "Patch")
                {
                    Patch* patch = new Patch;
                    patch->read(xml);
                    if (pg.empty())
                    {
                        PatchGroup* p = new PatchGroup;
                        p->patches.push_back(patch);
                        pg.push_back(p);
                    }
                    else
                        pg[0]->patches.push_back(patch);
                }
                else if (tag == "PatchGroup")
                {
                    PatchGroup* p = new PatchGroup;
                    p->read(xml);
                    pg.push_back(p);
                }
                else if (tag == "Controller")
                {
                    MidiController* mc = new MidiController();
                    mc->read(xml);
                    // Added by Tim. Copied from los 2.
                    //
                    // HACK: make predefined "Program" controller overloadable
                    //
                    if (mc->name() == "Program")
                    {
                        for (iMidiController i = _controller->begin(); i != _controller->end(); ++i)
                        {
                            if (i->second->name() == mc->name())
                            {
                                delete i->second;
                                _controller->erase(i);
                                break;
                            }
                        }
                    }

                    _controller->add(mc);
                }
                else if (tag == "Init")
                    readEventList(xml, _midiInit, "Init");
                else if (tag == "Reset")
                    readEventList(xml, _midiReset, "Reset");
                else if (tag == "State")
                    readEventList(xml, _midiState, "State");
                else if (tag == "InitScript")
                {
                    if (_initScript)
                        delete _initScript;
                    QByteArray ba = xml.parse1().toLatin1();
                    const char* istr = ba.constData();
                    int len = strlen(istr) + 1;
                    if (len > 1)
                    {
                        _initScript = new char[len];
                        memcpy(_initScript, istr, len);
                    }
                }
                else if(tag == "KeyMap")
                {
                    KeyMap *km = new KeyMap;
                    km->read(xml);
                    m_keymaps.insert(km->key, km);
                }
                else
                    xml.unknown("MidiInstrument");
                break;
            case Xml::Attribut:
                if (tag == "name")
                    setIName(xml.s2());
                else if (tag == "nullparam")
                {
                    _nullvalue = xml.s2().toInt(&ok, base);
                }
                else if(tag == "panValue")
                    m_panValue = xml.s2().toDouble();
                break;
            case Xml::TagEnd:
                if (tag == "MidiInstrument")
                    return;
            default:
                break;
        }
    }
}
Esempio n. 27
0
File: route.cpp Progetto: 87maxi/oom
void Route::read(Xml& xml)/*{{{*/
{
	QString s;
	int dtype = MidiDevice::ALSA_MIDI;
	int port = -1;
	unsigned char rtype = Route::TRACK_ROUTE;

	for (;;)
	{
		const QString& tag = xml.s1();
		Xml::Token token = xml.parse();
		switch (token)
		{
			case Xml::Error:
			case Xml::End:
				return;
			case Xml::Attribut:
#ifdef ROUTE_DEBUG
				printf("Route::read(): attribute:%s\n", tag.toLatin1().constData());
#endif
				if (tag == "type")
					rtype = xml.s2().toInt();
				else if (tag == "devtype")
				{
					dtype = xml.s2().toInt();
					rtype = Route::MIDI_DEVICE_ROUTE;
				}
				else if (tag == "name")
					s = xml.s2();
				else if(tag == "trackId")
				{
					trackId = xml.s2().toLongLong();
					rtype = Route::TRACK_ROUTE;
				}
				else if (tag == "mport") // p3.3.49
				{
					port = xml.s2().toInt();
					rtype = Route::MIDI_PORT_ROUTE;
				}
				else if(tag == "mportId")
				{
					midiPortId  = xml.s2().toLongLong();
					rtype = Route::MIDI_PORT_ROUTE;
				}
				else
					printf("Route::read(): unknown attribute:%s\n", tag.toLatin1().constData());
				break;
			case Xml::TagEnd:
#ifdef ROUTE_DEBUG
				printf("Route::read(): tag end type:%d channel:%d name:%s\n", rtype, channel, s.toLatin1().constData());
#endif
				if (rtype == MIDI_PORT_ROUTE)
				{
					if(midiPortId > 0)
					{
						//qDebug("Route::read(): MIDI_PORT_ROUTE Finding midiport from id");
						type = rtype;
						MidiPort *mp = oomMidiPorts.value(midiPortId);
						if(mp)
						{
							midiPort = mp->portno();
							//qDebug("Route::read(): Found midiport from id: %d", midiPort);
						}
					}
					else if (port >= 0 && port < MIDI_PORTS)
					{
						type = rtype;
						midiPort = port;
						MidiPort *mp = &midiPorts[midiPort];
						midiPortId = mp->id();
					}
					else
						printf("Route::read(): midi port <%d> out of range\n", port);
				}
				else if (!s.isEmpty())
				{
					if (rtype == TRACK_ROUTE)
					{
						if(trackId > 0)
						{
							track = song->findTrackById(trackId);
							type = rtype;
						}
						else
						{
							TrackList* tl = song->tracks();
							iTrack i = tl->begin();
							for (; i != tl->end(); ++i)
							{
								Track* t = *i;
								if (t->name() == s)
								{
									track = t;
									type = rtype;
									trackId = t->id();
									break;
								}
							}
							if (i == tl->end())
								printf("Route::read(): track <%s> not found\n", s.toLatin1().constData());
						}
					}
					else if (rtype == JACK_ROUTE)
					{
						void* jport = 0;
						if (audioDevice) //Fix from Robert at muse
							jport = audioDevice->findPort(s.toLatin1().constData());

						if (jport == 0)
							printf("Route::read(): jack port <%s> not found audioDevice(%p)\n", s.toLatin1().constData(), audioDevice);
						else
						{
							jackPort = jport;
							type = rtype;
						}
					}
					else if (rtype == MIDI_DEVICE_ROUTE)
					{
						iMidiDevice imd = midiDevices.begin();
						for (; imd != midiDevices.end(); ++imd)
						{
							MidiDevice* md = *imd;
							if (md->name() == s && md->deviceType() == dtype)
							{
								// We found a device, but if it is not in use by the song (port is -1), ignore it.
								// This prevents loading and propagation of bogus routes in the oom file.
								if (md->midiPort() == -1)
									break;

								device = md;
								type = rtype;
								break;
							}
						}
						if (imd == midiDevices.end())
							printf("Route::read(): midi device <%s> not found\n", s.toLatin1().constData());
					}
				}
				return;
			default:
				break;
		}
	}
}/*}}}*/
Esempio n. 28
0
File: conf.cpp Progetto: Adamiko/los
static void readConfigMidiPort(Xml& xml)/*{{{*/
{
    int idx = 0;
    qint64 id = -1;
    QString device;
    bool isGlobal = false;

    QString instrument("GM");

    QList<PatchSequence*> patchSequences;
    QList<QPair<int, QString> > presets;

    int openFlags = 1;
    int dic = 0;
    int doc = 0;
    int type = MidiDevice::ALSA_MIDI;
    bool cachenrpn = false;

    MidiDevice* dev = 0;

    for (;;)
    {
        Xml::Token token = xml.parse();
        if (token == Xml::Error || token == Xml::End)
            break;
        QString tag = xml.s1();
        switch (token)
        {
            case Xml::TagStart:
                if (tag == "name")
                {
                    device = xml.parse1();
                    if (!dev)//Look for it as an alsa or already created device
                        dev = midiDevices.find(device);
                }
                else if (tag == "type")
                {
                    type = xml.parseInt();
                }
                else if (tag == "record")
                {   // old
                    bool f = xml.parseInt();
                    if (f)
                        openFlags |= 2;
                }
                else if (tag == "openFlags")
                    openFlags = xml.parseInt();
                else if (tag == "defaultInChans")
                    dic = xml.parseInt();
                else if (tag == "defaultOutChans")
                    doc = xml.parseInt();
                else if (tag == "instrument")
                {
                    instrument = xml.parse1();
                }
                else if (tag == "channel")
                {
                    readPortChannel(xml, idx);
                }
                else if (tag == "preset" || tag == "patchSequence")
                {
                    PatchSequence* p = readMidiPortPatchSequences(xml);
                    if (p)
                        patchSequences.append(p);
                }
                else if(tag == "midiPreset")
                {
                    presets.append(readMidiPortPreset(xml));
                }
                else if(tag == "cacheNRPN")
                {
                    cachenrpn = xml.parseInt();
                }
                else
                    xml.skip(tag);
                break;
            case Xml::Attribut:
                if (tag == "idx")
                {//Check to see if this port is already used, and bump if so
                    idx = xml.s2().toInt();
                    int freePort = getFreeMidiPort();
                    if(freePort != idx)
                    {//Set a flag here so we know when loading tracks later that we are dealing with an old file or global inputs changed
                        idx = freePort;
                    }
                }
                else if(tag == "portId")
                {//New style
                    id = xml.s2().toLongLong();
                    idx = getFreeMidiPort();
                }
                else if(tag == "isGlobalInput")
                {//Find the matching input if posible and set our index to it
                    isGlobal = xml.s2().toInt();
                }
                break;
            case Xml::TagEnd:
                if (tag == "midiport")
                {
                    if(isGlobal)
                    {//Find the global input that matches
                        //
                        if(gInputListPorts.size())
                        {
                            int myport = -1;
                            for(int i = 0; i < gInputListPorts.size(); ++i)
                            {
                                myport =  gInputListPorts.at(i);

                                MidiPort* inport = &midiPorts[i];
                                if(inport && inport->device() && inport->device()->name() == device)
                                {
                                    idx = myport;
                                    break;
                                }
                            }
                        }
                    }

                    if (idx < 0 || idx >= MIDI_PORTS)
                    {
                        fprintf(stderr, "bad midi port %d (>%d)\n",
                                idx, MIDI_PORTS);
                        idx = 0;
                    }

                    if (!dev)
                    {
                        if (type == MidiDevice::JACK_MIDI)
                        {
                            dev = MidiJackDevice::createJackMidiDevice(device); // p3.3.55

                            if (debugMsg)
                                fprintf(stderr, "readConfigMidiPort: creating jack midi device %s\n", device.toLatin1().constData());
                        }
                        else
                            dev = midiDevices.find(device);
                    }

                    if (debugMsg && !dev)
                        fprintf(stderr, "readConfigMidiPort: device not found %s\n", device.toLatin1().constData());

                    MidiPort* mp = &midiPorts[idx];
                    if(id)
                        mp->setPortId(id);

                    mp->setInstrument(registerMidiInstrument(instrument));
                    mp->setDefaultInChannels(dic);
                    mp->setDefaultOutChannels(doc);

                    //Indicate the port was found in the song file, even if no device is assigned to it.
                    mp->setFoundInSongFile(true);

                    if (!patchSequences.isEmpty())
                    {
                        for (int i = 0; i < patchSequences.size(); ++i)
                        {
                            mp->appendPatchSequence(patchSequences.at(i));
                        }
                    }
                    if(!presets.isEmpty())
                    {
                        for(int i = 0; i < presets.size(); ++i)
                        {
                            QPair<int, QString> pair = presets.at(i);
                            mp->addPreset(pair.first, pair.second);
                        }
                    }

                    if (dev)
                    {
                        dev->setOpenFlags(openFlags);
                        midiSeq->msgSetMidiDevice(mp, dev);
                        dev->setCacheNRPN(cachenrpn);
                    }
                    losMidiPorts.insert(mp->id(), mp);
                    return;
                }
            default:
                break;
        }
    }
}/*}}}*/
Esempio n. 29
0
void MidiInstrument::read(Xml& xml)
      {
      for (;;) {
            Xml::Token token = xml.parse();
            const QString& tag = xml.s1();
            switch (token) {
                  case Xml::Error:
                  case Xml::End:
                        return;
                  case Xml::TagStart:
                        if (tag == "Patch") {
                              Patch* patch = new Patch;
                              patch->read(xml);
                              if (pg.empty()) {
                                    PatchGroup* p = new PatchGroup;
                                    p->patches.push_back(patch);
                                    pg.push_back(p);
                                    }
                              else
                                    pg[0]->patches.push_back(patch);
                              }
                        else if (tag == "PatchGroup") {
                              PatchGroup* p = new PatchGroup;
                              p->read(xml);
                              pg.push_back(p);
                              }
                        else if (tag == "Controller") {
                              MidiController* mc = new MidiController();
                              mc->read(xml);
                              //
                              // HACK: make predefined "Program" controller overloadable
                              //
                              if (mc->name() == "Program") {
                                    for (iMidiController i = _controller->begin(); i != _controller->end(); ++i) {
                                          if (i->second->name() == mc->name()) {
                                                delete i->second;
                                                _controller->del(i);
                                                break;
                                                }
                                          }
                                    }

                              _controller->add(mc);
                              }
                        else if (tag == "Drummaps") {
                              readDrummaps(xml);
                              }
                        else if (tag == "Init")
                              readEventList(xml, _midiInit, "Init");
                        else if (tag == "Reset")
                              readEventList(xml, _midiReset, "Reset");
                        else if (tag == "State")
                              readEventList(xml, _midiState, "State");
                        else if (tag == "InitScript") {
                              if (_initScript)
                                    delete _initScript;
                              QByteArray ba = xml.parse1().toLatin1();
                              const char* istr = ba.constData();
                              int len = ba.length() +1;
                              if (len > 1) {
                                    _initScript = new char[len];
                                    memcpy(_initScript, istr, len);
                                    }
                              }
                        else if (tag == "SysEx") {
                              SysEx* se = new SysEx;
                              if(!se->read(xml))
                              {
                                delete se;
                                printf("MidiInstrument::read():SysEx: reading sysex failed\n");
                              }
                              else
                                _sysex.append(se);
                              }
                        else
                              xml.unknown("MidiInstrument");
                        break;
                  case Xml::Attribut:
                        if (tag == "name")
                              setIName(xml.s2());
                        else if(tag == "nullparam") { } // Obsolete.
                        else if(tag == "NoteOffMode") 
                              _noteOffMode = (NoteOffMode)xml.s2().toInt(); // Default is NoteOffAll.
                        break;
                  case Xml::TagEnd:
                        if (tag == "MidiInstrument")
                              return;
                  default:
                        break;
                  }
            }
      }
Esempio n. 30
0
File: conf.cpp Progetto: Adamiko/los
void readConfiguration(Xml& xml, bool readOnlySequencer)/*{{{*/
{
    for (;;)
    {
        Xml::Token token = xml.parse();
        if (token == Xml::Error || token == Xml::End)
            break;
        QString tag = xml.s1();
        switch (token)
        {
            case Xml::TagStart:
                /* the reading of configuration is split in two; read
                   "sequencer" and read ALL. The reason is that it is
                   possible to load a song without configuration. In
                   this case the <configuration> chapter in the song
                   file should be skipped. However the sub part
                   <sequencer> contains elements that are necessary
                   to preserve composition consistency. Mainly
                   midiport configuration and VOLUME.
                 */
                if (tag == "sequencer")
                {
                    readSeqConfiguration(xml);
                    break;
                }
                else if (readOnlySequencer)
                {
                    xml.skip(tag);
                    break;
                }

                if (tag == "theme")
                    config.style = xml.parse1();
                else if (tag == "styleSheetFile")
                    config.styleSheetFile = xml.parse1();
                else if (tag == "useOldStyleStopShortCut")
                    config.useOldStyleStopShortCut = xml.parseInt();
                else if (tag == "moveArmedCheckBox")
                    config.moveArmedCheckBox = xml.parseInt();
                else if (tag == "externalWavEditor")
                    config.externalWavEditor = xml.parse1();
                else if (tag == "font0")
                    config.fonts[0].fromString(xml.parse1());
                else if (tag == "font1")
                    config.fonts[1].fromString(xml.parse1());
                else if (tag == "font2")
                    config.fonts[2].fromString(xml.parse1());
                else if (tag == "font3")
                    config.fonts[3].fromString(xml.parse1());
                else if (tag == "font4")
                    config.fonts[4].fromString(xml.parse1());
                else if (tag == "font5")
                    config.fonts[5].fromString(xml.parse1());
                else if (tag == "font6")
                    config.fonts[6].fromString(xml.parse1());
                else if (tag == "globalAlphaBlend")
                    config.globalAlphaBlend = xml.parseInt();
                else if (tag == "palette0")
                    config.palette[0] = readColor(xml);
                else if (tag == "palette1")
                    config.palette[1] = readColor(xml);
                else if (tag == "palette2")
                    config.palette[2] = readColor(xml);
                else if (tag == "palette3")
                    config.palette[3] = readColor(xml);
                else if (tag == "palette4")
                    config.palette[4] = readColor(xml);
                else if (tag == "palette5")
                    config.palette[5] = readColor(xml);
                else if (tag == "palette6")
                    config.palette[6] = readColor(xml);
                else if (tag == "palette7")
                    config.palette[7] = readColor(xml);
                else if (tag == "palette8")
                    config.palette[8] = readColor(xml);
                else if (tag == "palette9")
                    config.palette[9] = readColor(xml);
                else if (tag == "palette10")
                    config.palette[10] = readColor(xml);
                else if (tag == "palette11")
                    config.palette[11] = readColor(xml);
                else if (tag == "palette12")
                    config.palette[12] = readColor(xml);
                else if (tag == "palette13")
                    config.palette[13] = readColor(xml);
                else if (tag == "palette14")
                    config.palette[14] = readColor(xml);
                else if (tag == "palette15")
                    config.palette[15] = readColor(xml);
                else if (tag == "palette16")
                    config.palette[16] = readColor(xml);
                else if (tag == "ctrlGraphFg")
                    config.ctrlGraphFg = readColor(xml);
                else if (tag == "extendedMidi")
                    config.extendedMidi = xml.parseInt();
                else if (tag == "midiExportDivision")
                    config.midiDivision = xml.parseInt();
                else if (tag == "smfFormat")
                    config.smfFormat = xml.parseInt();
                else if (tag == "exp2ByteTimeSigs")
                    config.exp2ByteTimeSigs = xml.parseInt();
                else if (tag == "expOptimNoteOffs")
                    config.expOptimNoteOffs = xml.parseInt();
                else if (tag == "importMidiSplitParts")
                    config.importMidiSplitParts = xml.parseInt();
                else if (tag == "midiInputDevice")
                    midiInputPorts = xml.parseInt();
                else if (tag == "midiInputChannel")
                    midiInputChannel = xml.parseInt();
                else if (tag == "midiRecordType")
                    midiRecordType = xml.parseInt();
                else if (tag == "midiThruType")
                    midiThruType = xml.parseInt();
                else if (tag == "midiFilterCtrl1")
                    midiFilterCtrl1 = xml.parseInt();
                else if (tag == "midiFilterCtrl2")
                    midiFilterCtrl2 = xml.parseInt();
                else if (tag == "midiFilterCtrl3")
                    midiFilterCtrl3 = xml.parseInt();
                else if (tag == "midiFilterCtrl4")
                    midiFilterCtrl4 = xml.parseInt();
                else if (tag == "canvasShowPartType")
                    config.canvasShowPartType = xml.parseInt();
                else if (tag == "canvasShowPartEvent")
                    config.canvasShowPartEvent = xml.parseInt();
                else if (tag == "canvasShowGrid")
                    config.canvasShowGrid = xml.parseInt();
                else if (tag == "canvasBgPixmap")
                    config.canvasBgPixmap = xml.parse1();
                else if (tag == "canvasCustomBgList")
                    config.canvasCustomBgList = xml.parse1().split(";", QString::SkipEmptyParts);
                else if(tag == "vuColorStrip")
                {
                    vuColorStrip = xml.parseInt();
                }
                else if(tag == "nextTrackPartColor")
                {
                    lastTrackPartColorIndex = xml.parseInt();
                }
                else if (tag == "mtctype")
                    AL::mtcType = xml.parseInt();
                else if (tag == "jackTransportMaster")
                {
                    // XXX FIXME
                    bool jackTransportMaster = xml.parseInt();
                    if (audioDevice)
                        audioDevice->setMaster(jackTransportMaster);
                }
                else if (tag == "shortcuts")
                    readShortCuts(xml);
                else if (tag == "division")
                    config.division = xml.parseInt();
                else if (tag == "guiDivision")
                    config.guiDivision = xml.parseInt();
                else if (tag == "rtcTicks")
                    config.rtcTicks = xml.parseInt();
                else if (tag == "minMeter")
                    config.minMeter = xml.parseInt();
                else if (tag == "minSlider")
                    config.minSlider = xml.parseDouble();
                else if (tag == "freewheelMode")
                    config.freewheelMode = xml.parseInt();
                else if (tag == "denormalProtection")
                    config.useDenormalBias = xml.parseInt();
                else if (tag == "outputLimiter")
                    config.useOutputLimiter = xml.parseInt();
                else if (tag == "dummyAudioSampleRate")
                    config.dummyAudioSampleRate = xml.parseInt();
                else if (tag == "dummyAudioBufSize")
                    config.dummyAudioBufSize = xml.parseInt();
                else if (tag == "guiRefresh")
                    config.guiRefresh = xml.parseInt();
                else if (tag == "userInstrumentsDir")
                    config.userInstrumentsDir = xml.parse1();
                else if (tag == "midiTransform")
                    readMidiTransform(xml);
                else if (tag == "midiInputTransform")
                    readMidiInputTransform(xml);
                else if (tag == "startMode")
                    config.startMode = xml.parseInt();
                else if (tag == "startSong")
                    config.startSong = xml.parse1();
                else if (tag == "projectBaseFolder")
                    config.projectBaseFolder = xml.parse1();
                else if (tag == "projectStoreInFolder")
                    config.projectStoreInFolder = xml.parseInt();
                else if (tag == "useProjectSaveDialog")
                    config.useProjectSaveDialog = xml.parseInt();
                else if (tag == "useAutoCrossFades")
                    config.useAutoCrossFades = xml.parseInt();
                else if(tag == "globalInputList")
                    readGlobalInputList(xml);
                else
                    xml.skip(tag);
                break;
            case Xml::Text:
                printf("text <%s>\n", xml.s1().toLatin1().constData());
                break;
            case Xml::Attribut:
                if (readOnlySequencer)
                    break;
                if (tag == "version")
                {
                    int major = xml.s2().section('.', 0, 0).toInt();
                    int minor = xml.s2().section('.', 1, 1).toInt();
                    xml.setVersion(major, minor);
                }
                break;
            case Xml::TagEnd:
                if (tag == "configuration")
                {
                    return;
                }
                break;
            case Xml::Proc:
            default:
                break;
        }
    }
}/*}}}*/