Esempio n. 1
0
 FinalDrawCallback( osg::Camera* camera ) {
   const osg::Viewport* viewport    = camera->getViewport();
   osg::Viewport::value_type width  = viewport->width();
   osg::Viewport::value_type height = viewport->height();
   cout << "viewport w/h: " << width << " " << height << endl;
   depthbufferimg = new osg::Image;
   depthbufferimg->allocateImage(width, height, 1, GL_DEPTH_COMPONENT, GL_FLOAT);
   colorbufferimg = new osg::Image;
   colorbufferimg->allocateImage(width, height, 1, GL_RGBA, GL_UNSIGNED_BYTE);
   camera->attach(osg::Camera::DEPTH_BUFFER, depthbufferimg.get(), 0, 0);
   camera->attach(osg::Camera::COLOR_BUFFER, colorbufferimg.get(), 0, 0); 
   done = false;
 }
Esempio n. 2
0
osg::Matrix vpb::MyDataSet::getImageSection(vips::VImage &in,const osg::Vec2 minT, const osg::Vec2 maxT,int origX,int origY,osg::Vec4 &texsize,const osg::Matrix &toTex,osg::ref_ptr<osg::Image> &image,osg::Vec4 &ratio,int level){

    double downsampleFactor=pow(2,level);
    double downsampleRatio=1.0/downsampleFactor;
    // std::cout<< minT << " " << maxT<<std::endl;
    // printf("%f %f\n",downsampleRatio,downsampleRatio);
    int x=(int)std::max((int)floor(minT.x()),0);
    int y=(int)std::max((int)floor(minT.y()),0);
    int xMax=(int)std::min((int)ceil(maxT.x()),origX);
    int yMax=(int)std::min((int)ceil(maxT.y()),origY);
    int xRange=(xMax-x);
    int yRange=(yMax-y);
    //printf("X:%d -- %d Y:%d -- %d ",x,xMax,y,yMax);

    //Need bias of 1.0 or will round down
    double maxSide=std::max(osg::Image::computeNearestPowerOfTwo(xRange,1.0),osg::Image::computeNearestPowerOfTwo(yRange,1.0));
    osg::Vec2 subSize=osg::Vec2(maxSide,maxSide);
    if(downsampleRatio*maxSide < 1.0){
        printf("Clipping %f %f to",downsampleRatio,downsampleFactor);
        downsampleRatio=1.0/maxSide;
        downsampleFactor=maxSide;
        printf("%f %f\n",downsampleRatio,downsampleFactor);

    }
    texsize[0]=origX;
    texsize[1]=origY;
    texsize[2]=subSize.x();
    texsize[3]=subSize.y();
    osg::Vec2 downsampleSize(subSize.x(),subSize.y());
    downsampleSize.x()*=downsampleRatio;
    downsampleSize.y()*=downsampleRatio;

    // printf("Range %d %d\n",xRange,yRange);
    // printf("%f %f %f %f\n",subSize.x(),subSize.y(),downsampleSize.x(),downsampleSize.y());
    image = new osg::Image;
    image->allocateImage(downsampleSize.x(),downsampleSize.y(), 1, GL_RGB,GL_UNSIGNED_BYTE);
    if(image->data() == 0 ){
        fprintf(stderr,"Failed to allocate\n");
        exit(-1);
    }
    {
        OpenThreads::ScopedLock<OpenThreads::Mutex> lock(_imageMutex);
        vips::VImage osgImage(image->data(),downsampleSize.x(),downsampleSize.y(),3,vips::VImage::FMTUCHAR);
        in.extract_area(x,y,xRange,yRange).embed(1,0,0,subSize.x(),subSize.y()).shrink(downsampleFactor,downsampleFactor).write(osgImage);
    }
    ratio=osg::Vec4(x,y,subSize.x(),subSize.y());
    //osg::Vec2 f(xRange-subSize.x(),yRange-subSize.y());
    //std::cout << f<<std::endl;
    return toTex;
}
Esempio n. 3
0
/* The main entry */
int render(osg::Node *scene,osg::ref_ptr<osg::Image> &image,osg::GraphicsContext &gc,osg::Matrix &toScreen,const osg::Vec4 &sizes)
{
    // Poster arguments
    bool activeMode = false;
    bool outputPoster = true;
    assert(sizes[2]== sizes[3]);
    int tileWidth = sizes[0], tileHeight = sizes[1];
    int posterWidth = sizes[2], posterHeight = sizes[3];
    std::string posterName = "poster.bmp", extName = "bmp";
    osg::Vec4 bgColor(0.2f, 0.2f, 0.6f, 1.0f);
    osg::Camera::RenderTargetImplementation renderImplementation =  osg::Camera::FRAME_BUFFER_OBJECT;



    // Camera settings for inactive screenshot
    osg::Vec3d latLongHeight( 50.0, 10.0, 2000.0 );
    osg::Vec3d hpr( 0.0, 0.0, 0.0 );
    const osg::BoundingSphere &bs=scene->getBound();
    osg::Vec3d eye(bs.center()+osg::Vec3(0,0,3.5*bs.radius()));

    osg::ComputeBoundsVisitor cbbv(osg::NodeVisitor::TRAVERSE_ALL_CHILDREN);
    scene->traverse(cbbv);
    osg::BoundingBox bb = cbbv.getBoundingBox();

    if ( !scene )
    {
        std::cout << "No data loaded" << std::endl;
        return 1;
    }

    // Create camera for rendering tiles offscreen. FrameBuffer is recommended because it requires less memory.
    osg::ref_ptr<osg::Camera> camera = new osg::Camera;
    camera->setClearColor( bgColor );
    camera->setClearMask( GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT );
    camera->setReferenceFrame( osg::Transform::ABSOLUTE_RF );
    camera->setRenderOrder( osg::Camera::PRE_RENDER );
    camera->setRenderTargetImplementation( renderImplementation );
    camera->setViewport( 0, 0, tileWidth, tileHeight );
    camera->addChild( scene );

    // Set the printer
    osg::ref_ptr<PosterPrinter> printer = new PosterPrinter;
    printer->setTileSize( tileWidth, tileHeight );
    printer->setPosterSize( posterWidth, posterHeight );
    printer->setCamera( camera.get() );

    if ( outputPoster )
    {
        image = new osg::Image;
        image->allocateImage( posterWidth, posterHeight, 1, GL_RGBA, GL_UNSIGNED_BYTE );
        printer->setFinalPoster( image.get() );
        printer->setOutputPosterName( posterName );
    }

#if 0
    // While recording sub-images of the poster, the scene will always be traversed twice, from its two
    // parent node: root and camera. Sometimes this may not be so comfortable.
    // To prevent this behaviour, we can use a switch node to enable one parent and disable the other.
    // However, the solution also needs to be used with care, as the window will go blank while taking
    // snapshots and recover later.
    osg::ref_ptr<osg::Switch> root = new osg::Switch;
    root->addChild( scene, true );
    root->addChild( camera.get(), false );
#else
    osg::ref_ptr<osg::Group> root = new osg::Group;
    root->addChild( scene );
    root->addChild( camera.get() );
#endif

    osgViewer::Viewer viewer;
    viewer.setSceneData( root.get() );
    viewer.getDatabasePager()->setDoPreCompile( false );
    viewer.getCamera()->setGraphicsContext(&gc);

    if ( renderImplementation==osg::Camera::FRAME_BUFFER )
    {
        // FRAME_BUFFER requires the window resolution equal or greater than the to-be-copied size
        viewer.setUpViewInWindow( 200, 200, tileWidth, tileHeight );
    }
    else
    {
        // We want to see the console output, so just render in a window
        //   viewer.setUpViewInWindow( 200, 200, tileWidth, tileHeight );
        viewer.getCamera()->setViewport(new osg::Viewport(0,0,tileWidth,tileHeight));

    }

    if ( activeMode )
    {
        //viewer.addEventHandler( new PrintPosterHandler(printer.get()) );
        viewer.addEventHandler( new osgViewer::StatsHandler );
        viewer.addEventHandler( new osgGA::StateSetManipulator(viewer.getCamera()->getOrCreateStateSet()) );
        viewer.setCameraManipulator( new osgGA::TrackballManipulator );
        viewer.run();
    }
    else
    {
        osg::Camera* camera = viewer.getCamera();
        computeViewMatrix( camera, eye, hpr );
        osg::Vec3 centeredMin,centeredMax;
        centeredMin=(bb._min-bb.center());
        centeredMax=(bb._max-bb.center());
        // camera->setProjectionMatrixAsOrtho2D(-bs.radius(),bs.radius(),-bs.radius(),bs.radius());
        camera->setProjectionMatrixAsOrtho2D(centeredMin[0],centeredMax[0],centeredMin[1],centeredMax[1]);
        toScreen=getToScreenMatrix(camera,osg::Vec2(posterWidth,posterHeight));
        osg::ref_ptr<CustomRenderer> renderer = new CustomRenderer( camera );
        camera->setRenderer( renderer.get() );
        viewer.setThreadingModel( osgViewer::Viewer::SingleThreaded );

        // Realize and initiate the first PagedLOD request
        viewer.realize();
        viewer.frame();

        printer->init( camera );
        while ( !printer->done() )
        {
            viewer.advance();

            // Keep updating and culling until full level of detail is reached
            renderer->setCullOnly( true );
            while ( viewer.getDatabasePager()->getRequestsInProgress() )
            {
                viewer.updateTraversal();
                viewer.renderingTraversals();
            }

            renderer->setCullOnly( false );
            printer->frame( viewer.getFrameStamp(), viewer.getSceneData() );
            viewer.renderingTraversals();
        }
    }
    return 0;


}