BOOL CGPSAPIReader::close()
{
// clear previous stored data.
if (m_hDevice) {
// terminate reading thread.
SetEvent(m_hStopEvent);
if (m_hThread) {
int wait_for = 3 * READ_TIMEOUT;
if (WaitForSingleObject(m_hThread, wait_for) == WAIT_TIMEOUT) {
coreprintln("forced to kill thread after %s ms of waiting it for termination", wait_for);
TerminateThread(m_hThread, 0);
}
CloseHandle(m_hThread);
m_hThread = NULL;
}
// close the device.
DWORD dwResult = GPSCloseDevice(m_hDevice);
if (ERROR_SUCCESS == dwResult) {
m_hDevice = NULL;
return true;
}
}
return false;
}
HRESULT CGPSDevice::TurnOff()
{
CGPSDevice * pDevice = Instance();
if( !pDevice->m_hGPS_Device )
return E_UNEXPECTED;
HRESULT hr = pDevice->StopThread();
pDevice->m_pController = NULL;
DWORD dwRet = GPSCloseDevice(pDevice->m_hGPS_Device);
pDevice->m_hGPS_Device = NULL;
if( SUCCEEDED(hr) )
{
if( ERROR_SUCCESS != dwRet )
hr = HRESULT_FROM_WIN32(GetLastError());
}
return hr;
}
// We try to keep the GPS turned off as much as we can to preserve battery life.
// When run() is called we turn on the GPS device and we leave it on
// until the request is satisfied or periodic updates are stopped.
// The methods requestUpdate() and startUpdates() will call start() if required.
void QGeoInfoThreadWinCE::run()
{
mutex.lock();
gpsReachedOnState = false;
m_gps = NULL;
const int handleCount = 3;
HANDLE handles[handleCount] = { m_newDataEvent, m_gpsStateChange, m_wakeUpEvent };
if (updatesScheduled || requestScheduled) {
m_gps = GPSOpenDevice(m_newDataEvent, m_gpsStateChange, NULL, 0);
}
while (true) {
if (stopping)
break;
if (!updatesScheduled && !requestScheduled) {
if (m_gps != NULL) {
GPSCloseDevice(m_gps);
m_gps = NULL;
}
statusUpdated.wait(&mutex);
if (updatesScheduled || requestScheduled) {
gpsReachedOnState = false;
m_gps = GPSOpenDevice(m_newDataEvent, m_gpsStateChange, NULL, 0);
}
}
// If the periodic update is 0 then updates are returned as available.
// If this is not the case then the next timeout will be set for whichever of
// the request and periodic updates that is due next.
// We cap the amount of time we spend waiting for updates.
DWORD timeout = MaximumMainLoopWaitTime;
QDateTime now = currentDateTime();
if (requestScheduled) {
if (!updatesScheduled || (updatesInterval == 0)
|| (msecsTo(requestNextTime, updatesNextTime) >= 0)) {
timeout = msecsTo(now, requestNextTime) + 100;
} else {
if (updatesInterval != 0)
timeout = msecsTo(now, updatesNextTime) + 100;
}
} else {
// updatesScheduled has to be true or we wouldn't still be in the larger while loop.
if (updatesInterval != 0)
timeout = msecsTo(now, updatesNextTime) + 100;
}
if (timeout > MaximumMainLoopWaitTime)
timeout = MaximumMainLoopWaitTime;
mutex.unlock();
DWORD dwRet = WaitForMultipleObjects(handleCount, handles, FALSE, timeout);
mutex.lock();
// The GPS data has been updated.
if (dwRet == WAIT_OBJECT_0) {
// The other options are:
// dwRet == WAIT_OBJECT_0 + 1
// => The GPS state has been updated.
// dwRet == WAIT_OBJECT_0 + 2
// => We called QGeoInfoThreadWinCE::wakeUp().
// dwRet == WAIT_TIMEOUT
// => WaitForMultipleObjects() timed out.
GPS_POSITION posn;
posn.dwVersion = GPS_VERSION_1;
posn.dwSize = sizeof(posn);
dwRet = GPSGetPosition(m_gps, &posn, timeout, 0);
if (dwRet == ERROR_SUCCESS) {
if (!validator->valid(posn)) {
invalidDataReceived = true;
} else {
m_lastPosition = posn;
hasLastPosition = true;
updateTimeoutTriggered = false;
// A request and a periodic update could both be satisfied at once.
// We use this flag to prevent a double update.
bool emitDataUpdated = false;
// If a request is in process we emit the dataUpdated signal.
if (requestScheduled) {
emitDataUpdated = true;
requestScheduled = false;
}
// If we are updating as data becomes available or if the update period has elapsed
// we emit the dataUpdated signal.
if (updatesScheduled) {
QDateTime now = currentDateTime();
if (updatesInterval == 0) {
emitDataUpdated = true;
} else if (msecsTo(now, updatesNextTime) < 0) {
while (msecsTo(now, updatesNextTime) < 0)
updatesNextTime = updatesNextTime.addMSecs(updatesInterval);
emitDataUpdated = true;
}
}
if (emitDataUpdated) {
hasLastPosition = false;
mutex.unlock();
emit dataUpdated(m_lastPosition);
mutex.lock();
}
}
}
}
if (dwRet != WAIT_OBJECT_0 || invalidDataReceived) {
invalidDataReceived = false;
// Third party apps may have the ability to turn off the gps hardware independently of
// the Microsoft GPS API.
// This checks for an unexpected power down and turns the hardware back on.
// The GPS state has been updated.
if (dwRet == WAIT_OBJECT_0 + 1) {
GPS_DEVICE device;
device.dwVersion = GPS_VERSION_1;
device.dwSize = sizeof(device);
dwRet = GPSGetDeviceState(&device);
if (device.dwDeviceState == SERVICE_STATE_ON) {
gpsReachedOnState = true;
} else if ((device.dwDeviceState == SERVICE_STATE_OFF) && gpsReachedOnState) {
// We do not want to mess with devices that are slow starting up, so we only
// turn on devices that have previously reached the "On" state.
gpsReachedOnState = false;
m_gps = GPSOpenDevice(m_newDataEvent, m_gpsStateChange, NULL, 0);
}
}
// We reach this point if the gps state has changed, if the wake up event has been
// triggered, if we received data we were not interested in from the GPS,
// or if a timeout occurred while waiting for gps data.
//
// In all of these cases we should check for request and periodic update timeouts.
QDateTime now = currentDateTime();
bool emitUpdateTimeout = false;
// Check for request timeouts.
if (requestScheduled && msecsTo(now, requestNextTime) < 0) {
requestScheduled = false;
emitUpdateTimeout = true;
}
// Check to see if a periodic update is due.
if (updatesScheduled && updatesInterval != 0 && (msecsTo(now, updatesNextTime) < 0)) {
while (msecsTo(now, updatesNextTime) < 0)
updatesNextTime = updatesNextTime.addMSecs(updatesInterval);
if (hasLastPosition) {
hasLastPosition = false;
mutex.unlock();
emit dataUpdated(m_lastPosition);
mutex.lock();
} else {
if (timeoutsForPeriodicUpdates && !updateTimeoutTriggered) {
updateTimeoutTriggered = true;
emitUpdateTimeout = true;
}
}
}
if (emitUpdateTimeout) {
mutex.unlock();
emit updateTimeout();
mutex.lock();
}
}
}
if (m_gps != NULL)
GPSCloseDevice(m_gps);
mutex.unlock();
}
