C++ (Cpp) ROMLASTPAGEの例

コード例 #1

0

ファイルを表示

ファイル: InfoNES_Mapper_048.c プロジェクト: Tonyfield/Nester

/*-------------------------------------------------------------------*/
void Map48_Init()
{
  int nPage;

  /* Initialize Mapper */
  MapperInit = Map48_Init;

  /* Write to Mapper */
  MapperWrite = Map48_Write;

  /* Write to SRAM */
  MapperSram = Map0_Sram;

  /* Write to APU */
  MapperApu = Map0_Apu;

  /* Read from APU */
  MapperReadApu = Map0_ReadApu;

  /* Callback at VSync */
  MapperVSync = Map0_VSync;

  /* Callback at HSync */
  MapperHSync = Map48_HSync;

  /* Callback at PPU */
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  /* Set SRAM Banks */
  SRAMBANK = SRAM;

  /* Set ROM Banks */
  ROMBANK0 = ROMPAGE( 0 );
  ROMBANK1 = ROMPAGE( 1 );
  ROMBANK2 = ROMLASTPAGE( 1 );
  ROMBANK3 = ROMLASTPAGE( 0 );

  /* Set PPU Banks */
  if ( NesHeader.byVRomSize > 0 )
  {
    for ( nPage = 0; nPage < 8; ++nPage )
      PPUBANK[ nPage ] = VROMPAGE( nPage );
    InfoNES_SetupChr();
  }

  /* Initialize IRQ Registers */
  Map48_Regs[ 0 ] = 0;
  Map48_IRQ_Enable = 0;
  Map48_IRQ_Cnt = 0;

  /* Set up wiring of the interrupt pin */
  K6502_Set_Int_Wiring( 1, 1 ); 
}

コード例 #2

0

ファイルを表示

ファイル: InfoNES_Mapper_230.cpp プロジェクト: 304471720/GridOS

/*-------------------------------------------------------------------*/
void Map230_Init()
{
  /* Initialize Mapper */
  MapperInit = Map230_Init;

  /* Write to Mapper */
  MapperWrite = Map230_Write;

  /* Write to SRAM */
  MapperSram = Map0_Sram;

  /* Write to APU */
  MapperApu = Map0_Apu;

  /* Read from APU */
  MapperReadApu = Map0_ReadApu;

  /* Callback at VSync */
  MapperVSync = Map0_VSync;

  /* Callback at HSync */
  MapperHSync = Map0_HSync;

  /* Callback at PPU */
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  /* Set SRAM Banks */
  SRAMBANK = SRAM;

  /* Initialize Registers */
  if( Map230_RomSw ) {
    Map230_RomSw = 0;
  } else {
    Map230_RomSw = 1;
  }

  /* Set ROM Banks */
  if( Map230_RomSw ) {
    ROMBANK0 = ROMPAGE( 0 );
    ROMBANK1 = ROMPAGE( 1 );
    ROMBANK2 = ROMPAGE( 14 );
    ROMBANK3 = ROMPAGE( 15 );
  } else {
    ROMBANK0 = ROMPAGE( 16 );
    ROMBANK1 = ROMPAGE( 17 );
    ROMBANK2 = ROMLASTPAGE( 1 );
    ROMBANK3 = ROMLASTPAGE( 0 );
  }

  /* Set up wiring of the interrupt pin */
  K6502_Set_Int_Wiring( 1, 1 ); 
}

コード例 #3

0

ファイルを表示

ファイル: Mapper_091.c プロジェクト: 652296757/nescaline

/*-------------------------------------------------------------------*/
void Map91_Init()
{
  /* Initialize Mapper */
  MapperInit = Map91_Init;

  /* Write to Mapper */
  MapperWrite = Map0_Write;

  /* Write to SRAM */
  MapperSram = Map91_Sram;

  /* Write to APU */
  MapperApu = Map0_Apu;

  /* Read from APU */
  MapperReadApu = Map0_ReadApu;

  /* Callback at VSync */
  MapperVSync = Map0_VSync;

  /* Callback at HSync */
  MapperHSync = Map0_HSync;

  /* Callback at PPU */
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  /* Set SRAM Banks */
  W.SRAMBANK = S.SRAM;

  /* Set ROM Banks */
  W.ROMBANK0 = ROMLASTPAGE( 1 );
  W.ROMBANK1 = ROMLASTPAGE( 0 );
  W.ROMBANK2 = ROMLASTPAGE( 1 );
  W.ROMBANK3 = ROMLASTPAGE( 0 );

  /* Set PPU Banks */
  if ( S.NesHeader.VROMSize > 0 )
  {
    int nPage ;
for (nPage = 0; nPage < 8; ++nPage )
      W.PPUBANK[ nPage ] = VROMPAGE( nPage );
    NESCore_Develop_Character_Data();
  }

  /* Set Name Table Mirroring */
  NESCore_Mirroring( 1 );


 
}

コード例 #4

0

ファイルを表示

ファイル: InfoNES_Mapper_188.cpp プロジェクト: 304471720/GridOS

/*-------------------------------------------------------------------*/
void Map188_Init()
{
  /* Initialize Mapper */
  MapperInit = Map188_Init;

  /* Write to Mapper */
  MapperWrite = Map188_Write;

  /* Write to SRAM */
  MapperSram = Map0_Sram;

  /* Write to APU */
  MapperApu = Map0_Apu;

  /* Read from APU */
  MapperReadApu = Map0_ReadApu;

  /* Callback at VSync */
  MapperVSync = Map0_VSync;

  /* Callback at HSync */
  MapperHSync = Map0_HSync;

  /* Callback at PPU */
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  /* Set SRAM Banks */
  SRAMBANK = Map188_Dummy;

  /* Set ROM Banks */
  if ( ( NesHeader.byRomSize << 1 ) > 16 )
  {
    ROMBANK0 = ROMPAGE( 0 );
    ROMBANK1 = ROMPAGE( 1 );
    ROMBANK2 = ROMPAGE( 14 );
    ROMBANK3 = ROMPAGE( 15 );
  } else {
    ROMBANK0 = ROMPAGE( 0 );
    ROMBANK1 = ROMPAGE( 1 );
    ROMBANK2 = ROMLASTPAGE( 1 );
    ROMBANK3 = ROMLASTPAGE( 0 );
  }

  /* Magic Code */
  Map188_Dummy[ 0 ] = 0x03;

  /* Set up wiring of the interrupt pin */
  K6502_Set_Int_Wiring( 1, 1 ); 
}

コード例 #5

0

ファイルを表示

ファイル: InfoNES_Mapper_018.cpp プロジェクト: nothingzz/iphonenes

/*-------------------------------------------------------------------*/
void Map18_Init()
{
  /* Initialize Mapper */
  MapperInit = Map18_Init;

  /* Write to Mapper */
  MapperWrite = Map18_Write;

  /* Write to SRAM */
  MapperSram = Map0_Sram;

  /* Write to APU */
  MapperApu = Map0_Apu;

  /* Read from APU */
  MapperReadApu = Map0_ReadApu;

  /* Callback at VSync */
  MapperVSync = Map0_VSync;

  /* Callback at HSync */
  MapperHSync = Map18_HSync;

  /* Callback at PPU */
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  /* Set SRAM Banks */
  SRAMBANK = SRAM;

  /* Set ROM Banks */
  ROMBANK0 = ROMPAGE( 0 );
  ROMBANK1 = ROMPAGE( 1 );
  ROMBANK2 = ROMLASTPAGE( 1 );
  ROMBANK3 = ROMLASTPAGE( 0 );

  /* Initialize Regs */
  int i ;
for (i = 0; i < sizeof( Map18_Regs ); i++ )
  {
    Map18_Regs[ i ] = 0;
  }
  Map18_IRQ_Enable = 0;
  Map18_IRQ_Latch = 0;
  Map18_IRQ_Cnt = 0;

  /* Set up wiring of the interrupt pin */
  K6502_Set_Int_Wiring( 1, 1 ); 
}

コード例 #6

0

ファイルを表示

ファイル: InfoNES_Mapper_248.c プロジェクト: Hiroyuki-Nagata/mona

/*-------------------------------------------------------------------*/
void Map248_Set_CPU_Banks()
{
  if( Map248_Reg[0] & 0x40 ) {
    ROMBANK0 = ROMLASTPAGE( 1 );
    ROMBANK1 = ROMPAGE(Map248_Prg1 % (NesHeader.byRomSize<<1));
    ROMBANK2 = ROMPAGE(Map248_Prg0 % (NesHeader.byRomSize<<1));
    ROMBANK3 = ROMLASTPAGE( 0 );
  } else {
    ROMBANK0 = ROMPAGE(Map248_Prg0 % (NesHeader.byRomSize<<1));
    ROMBANK1 = ROMPAGE(Map248_Prg1 % (NesHeader.byRomSize<<1));
    ROMBANK2 = ROMLASTPAGE( 1 );
    ROMBANK3 = ROMLASTPAGE( 0 );
  }
}

コード例 #7

0

ファイルを表示

ファイル: Mapper_248.c プロジェクト: 652296757/nescaline

/*-------------------------------------------------------------------*/
void Map248_Set_CPU_Banks()
{
  if( Map248_Reg[0] & 0x40 ) {
    W.ROMBANK0 = ROMLASTPAGE( 1 );
    W.ROMBANK1 = ROMPAGE(Map248_Prg1 % (S.NesHeader.ROMSize<<1));
    W.ROMBANK2 = ROMPAGE(Map248_Prg0 % (S.NesHeader.ROMSize<<1));
    W.ROMBANK3 = ROMLASTPAGE( 0 );
  } else {
    W.ROMBANK0 = ROMPAGE(Map248_Prg0 % (S.NesHeader.ROMSize<<1));
    W.ROMBANK1 = ROMPAGE(Map248_Prg1 % (S.NesHeader.ROMSize<<1));
    W.ROMBANK2 = ROMLASTPAGE( 1 );
    W.ROMBANK3 = ROMLASTPAGE( 0 );
  }
}

コード例 #8

0

ファイルを表示

ファイル: InfoNES_Mapper_251.cpp プロジェクト: nothingzz/iphonenes

/*-------------------------------------------------------------------*/
void Map251_Init()
{
  /* Initialize Mapper */
  MapperInit = Map251_Init;

  /* Write to Mapper */
  MapperWrite = Map251_Write;

  /* Write to SRAM */
  MapperSram = Map251_Sram;

  /* Write to APU */
  MapperApu = Map0_Apu;

  /* Read from APU */
  MapperReadApu = Map0_ReadApu;

  /* Callback at VSync */
  MapperVSync = Map0_VSync;

  /* Callback at HSync */
  MapperHSync = Map0_HSync;

  /* Callback at PPU */
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  /* Set SRAM Banks */
  SRAMBANK = SRAM;

  /* Set ROM Banks */
  ROMBANK0 = ROMPAGE( 0 );
  ROMBANK1 = ROMPAGE( 1 );
  ROMBANK2 = ROMLASTPAGE( 1 );
  ROMBANK3 = ROMLASTPAGE( 0 );

  /* Set Registers */
  InfoNES_Mirroring( 1 );

  int	i;
  for( i = 0; i < 11; i++ )
    Map251_Reg[i] = 0;
  for( i = 0; i < 4; i++ )
    Map251_Breg[i] = 0;

  /* Set up wiring of the interrupt pin */
  K6502_Set_Int_Wiring( 1, 1 ); 
}

コード例 #9

0

ファイルを表示

ファイル: InfoNES_Mapper_114.cpp プロジェクト: 304471720/GridOS

/*-------------------------------------------------------------------*/
void Map114_Set_CPU_Banks()
{
  if ( Map114_Prg_Swap() )
  {
    ROMBANK0 = ROMLASTPAGE( 1 );
    ROMBANK1 = ROMPAGE( Map114_Prg1 % ( NesHeader.byRomSize << 1 ) );
    ROMBANK2 = ROMPAGE( Map114_Prg0 % ( NesHeader.byRomSize << 1 ) );
    ROMBANK3 = ROMLASTPAGE( 0 );
  } else {
    ROMBANK0 = ROMPAGE( Map114_Prg0 % ( NesHeader.byRomSize << 1 ) );
    ROMBANK1 = ROMPAGE( Map114_Prg1 % ( NesHeader.byRomSize << 1 ) );
    ROMBANK2 = ROMLASTPAGE( 1 );
    ROMBANK3 = ROMLASTPAGE( 0 );
  }
}

コード例 #10

0

ファイルを表示

ファイル: Mapper_004.c プロジェクト: 652296757/nescaline

void Map4_Set_CPU_Banks()
{

  if (Map4_Prg_Swap())
  {
    W.ROMBANK0 = ROMLASTPAGE( 1 );
    W.ROMBANK1 = ROMPAGE( MS4.Prg1 % ( S.NesHeader.ROMSize << 1 ) );
    W.ROMBANK2 = ROMPAGE( MS4.Prg0 % ( S.NesHeader.ROMSize << 1 ) );
    W.ROMBANK3 = ROMLASTPAGE( 0 );
  } else {
    W.ROMBANK0 = ROMPAGE( MS4.Prg0 % ( S.NesHeader.ROMSize << 1 ) );
    W.ROMBANK1 = ROMPAGE( MS4.Prg1 % ( S.NesHeader.ROMSize << 1 ) );
    W.ROMBANK2 = ROMLASTPAGE( 1 );
    W.ROMBANK3 = ROMLASTPAGE( 0 );
  }
}

コード例 #11

0

ファイルを表示

ファイル: Mapper_232.c プロジェクト: 652296757/nescaline

/*-------------------------------------------------------------------*/
void Map232_Init()
{
  /* Initialize Mapper */
  MapperInit = Map232_Init;

  /* Write to Mapper */
  MapperWrite = Map232_Write;

  /* Write to SRAM */
  MapperSram = Map0_Sram;

  /* Write to APU */
  MapperApu = Map0_Apu;

  /* Read from APU */
  MapperReadApu = Map0_ReadApu;

  /* Callback at VSync */
  MapperVSync = Map0_VSync;

  /* Callback at HSync */
  MapperHSync = Map0_HSync;

  /* Callback at PPU */
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  /* Set SRAM Banks */
  W.SRAMBANK = S.SRAM;

  /* Set ROM Banks */
  W.ROMBANK0 = ROMPAGE( 0 );
  W.ROMBANK1 = ROMPAGE( 1 );
  W.ROMBANK2 = ROMLASTPAGE( 1 );
  W.ROMBANK3 = ROMLASTPAGE( 0 );

  /* Initialize Registers */
  Map232_Regs[0] = 0x0C;
  Map232_Regs[1] = 0x00;
  

 
}

コード例 #12

0

ファイルを表示

ファイル: Mapper_033.c プロジェクト: 652296757/nescaline

void Map33_Init()
{
  MapperInit = Map33_Init;
  MapperWrite = Map33_Write;
  MapperSram = Map0_Sram;
  MapperApu = Map0_Apu;
  MapperReadApu = Map0_ReadApu;
  MapperVSync = Map0_VSync;
  MapperHSync = Map0_HSync;
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  W.SRAMBANK = S.SRAM;
  W.ROMBANK0 = ROMPAGE( 0 );
  W.ROMBANK1 = ROMPAGE( 1 );
  W.ROMBANK2 = ROMLASTPAGE( 1 );
  W.ROMBANK3 = ROMLASTPAGE( 0 );

  /* Set PPU Banks */
  if ( S.NesHeader.VROMSize > 0 )
  {
    int nPage ;
    for (nPage = 0; nPage < 8; ++nPage )
    {
        W.PPUBANK[ nPage ] = VROMPAGE( nPage );
        Map33_Regs[ nPage ] = nPage;
    }
    NESCore_Develop_Character_Data();
  } 
  else 
  {
    int nPage ;
    for (nPage = 0; nPage < 8; ++nPage )
        Map33_Regs[ nPage ] = 0;
  }

  Map33_Switch = 0;
  Map33_IRQ_Enable = 0;
  Map33_IRQ_Cnt = 0;
}

コード例 #13

0

ファイルを表示

ファイル: Mapper_024.c プロジェクト: 652296757/nescaline

void Map24_Init()
{
  MapperInit = Map24_Init;
  MapperWrite = Map24_Write;
  MapperSram = Map0_Sram;
  MapperApu = Map0_Apu;
  MapperReadApu = Map0_ReadApu;
  MapperVSync = Map0_VSync;
  MapperHSync = Map24_HSync;
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  W.SRAMBANK = S.SRAM;
  W.ROMBANK0 = ROMPAGE( 0 );
  W.ROMBANK1 = ROMPAGE( 1 );
  W.ROMBANK2 = ROMLASTPAGE( 1 );
  W.ROMBANK3 = ROMLASTPAGE( 0 );
}

コード例 #14

0

ファイルを表示

ファイル: Mapper_071.c プロジェクト: 652296757/nescaline

void Map71_Init()
{
  MapperInit = Map71_Init;
  MapperWrite = Map71_Write;
  MapperSram = Map0_Sram;
  MapperApu = Map0_Apu;
  MapperReadApu = Map0_ReadApu;
  MapperVSync = Map0_VSync;
  MapperHSync = Map0_HSync;
  MapperPPU = Map0_PPU;
  MapperRenderScreen = Map0_RenderScreen;

  /* Set SRAM Banks */
  W.SRAMBANK = S.SRAM;

  /* Set ROM Banks */
  W.ROMBANK0 = ROMPAGE( 0 );
  W.ROMBANK1 = ROMPAGE( 1 );
  W.ROMBANK2 = ROMLASTPAGE( 1 );
  W.ROMBANK3 = ROMLASTPAGE( 0 );
}

コード例 #15

0

ファイルを表示

ファイル: Mapper_010.c プロジェクト: 652296757/nescaline

void Map10_Init()
{
  int nPage;

  MapperInit = Map10_Init;
  MapperWrite = Map10_Write;
  MapperSram = Map0_Sram;
  MapperApu = Map0_Apu;
  MapperReadApu = Map0_ReadApu;
  MapperVSync = Map0_VSync;
  MapperHSync = Map0_HSync;
  MapperPPU = Map10_PPU;
  MapperRenderScreen = Map0_RenderScreen;

  /* Set SRAM Banks */
  W.SRAMBANK = S.SRAM;
  W.ROMBANK0 = ROMPAGE( 0 );
  W.ROMBANK1 = ROMPAGE( 1 );
  W.ROMBANK2 = ROMLASTPAGE( 1 );
  W.ROMBANK3 = ROMLASTPAGE( 0 );

  /* Set PPU Banks */
  if ( S.NesHeader.VROMSize > 0 )
  {
    for ( nPage = 0; nPage < 8; ++nPage )
        W.PPUBANK[ nPage ] = VROMPAGE( nPage );
    NESCore_Develop_Character_Data();
  }

  /* Init Latch Selector */
  latch3.state = 0xfe;
  latch3.lo_bank = 0;
  latch3.hi_bank = 0;
  latch4.state = 0xfe;
  latch4.lo_bank = 0;
  latch4.hi_bank = 0;
}

コード例 #16

0

ファイルを表示

void Map67_Init()
{
  MapperInit = Map67_Init;
  MapperWrite = Map67_Write;
  MapperSram = Map0_Sram;
  MapperApu = Map0_Apu;
  MapperReadApu = Map0_ReadApu;
  MapperVSync = Map0_VSync;
  MapperHSync = Map67_HSync;
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  W.SRAMBANK = S.SRAM;
  W.ROMBANK0 = ROMPAGE( 0 );
  W.ROMBANK1 = ROMPAGE( 1 );
  W.ROMBANK2 = ROMLASTPAGE( 1 );
  W.ROMBANK3 = ROMLASTPAGE( 0 );

  /* Set PPU Banks */
  W.PPUBANK[ 0 ] = VROMPAGE( 0 );
  W.PPUBANK[ 1 ] = VROMPAGE( 1 );
  W.PPUBANK[ 2 ] = VROMPAGE( 2 );
  W.PPUBANK[ 3 ] = VROMPAGE( 3 );
  W.PPUBANK[ 4 ] = VROMPAGE( ( S.NesHeader.VROMSize << 3 ) - 4 );
  W.PPUBANK[ 5 ] = VROMPAGE( ( S.NesHeader.VROMSize << 3 ) - 3 );
  W.PPUBANK[ 6 ] = VROMPAGE( ( S.NesHeader.VROMSize << 3 ) - 2 );
  W.PPUBANK[ 7 ] = VROMPAGE( ( S.NesHeader.VROMSize << 3 ) - 1 );
  NESCore_Develop_Character_Data();

  /* Initialize IRQ Registers */
  Map67_IRQ_Enable = 0;
  Map67_IRQ_Cnt = 0;
  Map67_IRQ_Latch = 0;
}

コード例 #17

0

ファイルを表示

ファイル: InfoNES_Mapper_090.c プロジェクト: Tonyfield/Nester

/*-------------------------------------------------------------------*/
void Map90_Sync_Prg_Banks( void )
{
  switch ( Map90_Prg_Bank_Size )
  {
    case 0:
      ROMBANK0 = ROMLASTPAGE( 3 );
      ROMBANK1 = ROMLASTPAGE( 2 );
      ROMBANK2 = ROMLASTPAGE( 1 );
      ROMBANK3 = ROMLASTPAGE( 0 );      
      break;

    case 1:
      ROMBANK0 = ROMPAGE( ( ( Map90_Prg_Reg[ 1 ] << 1 ) + 0 ) % ( NesHeader.byRomSize << 1 ) );
      ROMBANK1 = ROMPAGE( ( ( Map90_Prg_Reg[ 1 ] << 1 ) + 1 ) % ( NesHeader.byRomSize << 1 ) );
      ROMBANK2 = ROMLASTPAGE( 1 );
      ROMBANK3 = ROMLASTPAGE( 0 );      
      break;

    case 2:
      if ( Map90_Prg_Bank_E000 )
      {
        ROMBANK0 = ROMPAGE( Map90_Prg_Reg[ 0 ] % ( NesHeader.byRomSize << 1 ) );
        ROMBANK1 = ROMPAGE( Map90_Prg_Reg[ 1 ] % ( NesHeader.byRomSize << 1 ) );
        ROMBANK2 = ROMPAGE( Map90_Prg_Reg[ 2 ] % ( NesHeader.byRomSize << 1 ) );
        ROMBANK3 = ROMPAGE( Map90_Prg_Reg[ 3 ] % ( NesHeader.byRomSize << 1 ) );   
      } else {
        if ( Map90_Prg_Bank_6000 )
        {
          SRAMBANK = ROMPAGE( Map90_Prg_Reg[ 3 ] % ( NesHeader.byRomSize << 1 ) );
        }
        ROMBANK0 = ROMPAGE( Map90_Prg_Reg[ 0 ] % ( NesHeader.byRomSize << 1 ) );
        ROMBANK1 = ROMPAGE( Map90_Prg_Reg[ 1 ] % ( NesHeader.byRomSize << 1 ) );
        ROMBANK2 = ROMPAGE( Map90_Prg_Reg[ 2 ] % ( NesHeader.byRomSize << 1 ) );
        ROMBANK3 = ROMLASTPAGE( 0 );  
      }
      break;

    default:
      /* 8k in reverse mode? */
      ROMBANK0 = ROMPAGE( Map90_Prg_Reg[ 3 ] % ( NesHeader.byRomSize << 1 ) );
      ROMBANK1 = ROMPAGE( Map90_Prg_Reg[ 2 ] % ( NesHeader.byRomSize << 1 ) );
      ROMBANK2 = ROMPAGE( Map90_Prg_Reg[ 1 ] % ( NesHeader.byRomSize << 1 ) );
      ROMBANK3 = ROMPAGE( Map90_Prg_Reg[ 0 ] % ( NesHeader.byRomSize << 1 ) ); 
      break;
  }
}

コード例 #18

0

ファイルを表示

ファイル: Mapper_083.c プロジェクト: carbamide/nescaline

/*-------------------------------------------------------------------*/
void Map83_Init()
{
  /* Initialize Mapper */
  MapperInit = Map83_Init;

  /* Write to Mapper */
  MapperWrite = Map83_Write;

  /* Write to SRAM */
  MapperSram = Map0_Sram;

  /* Write to APU */
  MapperApu = Map83_Apu;

  /* Read from APU */
  MapperReadApu = Map83_ReadApu;

  /* Callback at VSync */
  MapperVSync = Map0_VSync;

  /* Callback at HSync */
  MapperHSync = Map83_HSync;

  /* Callback at PPU */
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  /* Set SRAM Banks */
  W.SRAMBANK = S.SRAM;

  /* Initialize Registers */
  Map83_Regs[0] = Map83_Regs[1] = Map83_Regs[2] = 0;

  /* Set ROM Banks */
  if ( ( S.NesHeader.ROMSize << 1 ) >= 32 )
  {
    W.ROMBANK0 = ROMPAGE( 0 );
    W.ROMBANK1 = ROMPAGE( 1 );
    W.ROMBANK2 = ROMPAGE( 30 );
    W.ROMBANK3 = ROMPAGE( 31 );
    Map83_Regs[1] = 0x30;
  }
  else
  {
    W.ROMBANK0 = ROMPAGE( 0 );
    W.ROMBANK1 = ROMPAGE( 1 );
    W.ROMBANK2 = ROMLASTPAGE( 1 );
    W.ROMBANK3 = ROMLASTPAGE( 0 );
  }

  /* Set PPU Banks */
  if ( S.NesHeader.VROMSize > 0 )
  {
    int nPage ;
for (nPage = 0; nPage < 8; ++nPage )
      W.PPUBANK[nPage] = VROMPAGE( nPage );
    NESCore_Develop_Character_Data();
  }

  /* Initialize IRQ Registers */
  Map83_IRQ_Enabled = 0;
  Map83_IRQ_Cnt = 0;
  Map83_Chr_Bank = 0;


 
}

コード例 #19

0

ファイルを表示

ファイル: InfoNES_Mapper_090.c プロジェクト: Tonyfield/Nester

/*-------------------------------------------------------------------*/
void Map90_Init()
{
  int nPage;
  BYTE byPage;

  /* Initialize Mapper */
  MapperInit = Map90_Init;

  /* Write to Mapper */
  MapperWrite = Map90_Write;

  /* Write to SRAM */
  MapperSram = Map0_Sram;

  /* Write to APU */
  MapperApu = Map90_Apu;

  /* Read from APU */
  MapperReadApu = Map90_ReadApu;

  /* Callback at VSync */
  MapperVSync = Map0_VSync;

  /* Callback at HSync */
  MapperHSync = Map90_HSync;

  /* Callback at PPU */
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  /* Set SRAM Banks */
  SRAMBANK = SRAM;

  /* Set ROM Banks */
  ROMBANK0 = ROMLASTPAGE( 3 );
  ROMBANK1 = ROMLASTPAGE( 2 );
  ROMBANK2 = ROMLASTPAGE( 1 );
  ROMBANK3 = ROMLASTPAGE( 0 );

  /* Set PPU Banks */
  if ( NesHeader.byVRomSize > 0 )
  {
    for ( nPage = 0; nPage < 8; ++nPage )
      PPUBANK[ nPage ] = VROMPAGE( nPage );
    InfoNES_SetupChr();
  }

  /* Initialize IRQ Registers */
  Map90_IRQ_Cnt = 0;
  Map90_IRQ_Latch = 0;
  Map90_IRQ_Enable = 0;

  for ( byPage = 0; byPage < 4; byPage++ )
  {
    Map90_Prg_Reg[ byPage ] = ( NesHeader.byRomSize << 1 ) - 4 + byPage;
    Map90_Nam_Low_Reg[ byPage ] = 0;
    Map90_Nam_High_Reg[ byPage ] = 0;
    Map90_Chr_Low_Reg[ byPage ] = byPage;
    Map90_Chr_High_Reg[ byPage ] = 0;
    Map90_Chr_Low_Reg[ byPage + 4 ] = byPage + 4;
    Map90_Chr_High_Reg[ byPage + 4 ] = 0;
  }

  /* Set up wiring of the interrupt pin */
  K6502_Set_Int_Wiring( 1, 1 ); 
}

コード例 #20

0

ファイルを表示

ファイル: InfoNES_Mapper_019.cpp プロジェクト: 304471720/GridOS

/*-------------------------------------------------------------------*/
void Map19_Init()
{
  /* Initialize Mapper */
  MapperInit = Map19_Init;

  /* Write to Mapper */
  MapperWrite = Map19_Write;

  /* Write to SRAM */
  MapperSram = Map0_Sram;

  /* Write to APU */
  MapperApu = Map19_Apu;

  /* Read from APU */
  MapperReadApu = Map19_ReadApu;

  /* Callback at VSync */
  MapperVSync = Map0_VSync;

  /* Callback at HSync */
  MapperHSync = Map19_HSync;

  /* Callback at PPU */
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  /* Set SRAM Banks */
  SRAMBANK = SRAM;

  /* Set ROM Banks */
  ROMBANK0 = ROMPAGE( 0 );
  ROMBANK1 = ROMPAGE( 1 );
  ROMBANK2 = ROMLASTPAGE( 1 );
  ROMBANK3 = ROMLASTPAGE( 0 );

  /* Set PPU Banks */
  if ( NesHeader.byVRomSize > 0 )
  {
    DWORD dwLastPage = (DWORD)NesHeader.byVRomSize << 3;
    PPUBANK[ 0 ] = VROMPAGE( dwLastPage - 8 );
    PPUBANK[ 1 ] = VROMPAGE( dwLastPage - 7 );
    PPUBANK[ 2 ] = VROMPAGE( dwLastPage - 6 );
    PPUBANK[ 3 ] = VROMPAGE( dwLastPage - 5 );
    PPUBANK[ 4 ] = VROMPAGE( dwLastPage - 4 );
    PPUBANK[ 5 ] = VROMPAGE( dwLastPage - 3 );
    PPUBANK[ 6 ] = VROMPAGE( dwLastPage - 2 );
    PPUBANK[ 7 ] = VROMPAGE( dwLastPage - 1 );
    InfoNES_SetupChr();
  }

  /* Initialize State Register */
  Map19_Regs[ 0 ] = 0x00;
  Map19_Regs[ 1 ] = 0x00;
  Map19_Regs[ 2 ] = 0x00;

  /* Set up wiring of the interrupt pin */
  K6502_Set_Int_Wiring( 1, 1 ); 
}

コード例 #21

0

ファイルを表示

ファイル: InfoNES_Mapper_100.cpp プロジェクト: LastRitter/GridOS

/*-------------------------------------------------------------------*/
void Map100_Init()
{
    /* Initialize Mapper */
    MapperInit = Map100_Init;

    /* Write to Mapper */
    MapperWrite = Map100_Write;

    /* Write to SRAM */
    MapperSram = Map0_Sram;

    /* Write to APU */
    MapperApu = Map0_Apu;

    /* Read from APU */
    MapperReadApu = Map0_ReadApu;

    /* Callback at VSync */
    MapperVSync = Map0_VSync;

    /* Callback at HSync */
    MapperHSync = Map100_HSync;

    /* Callback at PPU */
    MapperPPU = Map0_PPU;

    /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
    MapperRenderScreen = Map0_RenderScreen;

    /* Set SRAM Banks */
    SRAMBANK = SRAM;

    /* Set ROM Banks */
    ROMBANK0 = ROMPAGE( 0 );
    ROMBANK1 = ROMPAGE( 1 );
    ROMBANK2 = ROMLASTPAGE( 1 );
    ROMBANK3 = ROMLASTPAGE( 0 );

    /* Set PPU Banks */
    if ( NesHeader.byVRomSize > 0 )
    {
        Map100_Chr0 = 0;
        Map100_Chr1 = 1;
        Map100_Chr2 = 2;
        Map100_Chr3 = 3;
        Map100_Chr4 = 4;
        Map100_Chr5 = 5;
        Map100_Chr6 = 6;
        Map100_Chr7 = 7;
        Map100_Set_PPU_Banks();
    } else {
        Map100_Chr0 = Map100_Chr2 = Map100_Chr4 = Map100_Chr5 = Map100_Chr6 = Map100_Chr7 = 0;
        Map100_Chr1 = Map100_Chr3 = 1;
    }

    /* Set IRQ Registers */
    Map100_IRQ_Enable = 0;
    Map100_IRQ_Cnt = 0;
    Map100_IRQ_Latch = 0;
    for( int i = 0; i < 8; i++ ) {
        Map100_Reg[ i ] = 0x00;
    }

    /* Set up wiring of the interrupt pin */
    K6502_Set_Int_Wiring( 1, 1 );
}

コード例 #22

0

ファイルを表示

ファイル: Mapper_249.c プロジェクト: 652296757/nescaline

/*-------------------------------------------------------------------*/
void Map249_Init()
{
  /* Initialize Mapper */
  MapperInit = Map249_Init;

  /* Write to Mapper */
  MapperWrite = Map249_Write;

  /* Write to SRAM */
  MapperSram = Map0_Sram;

  /* Write to APU */
  MapperApu = Map249_Apu;

  /* Read from APU */
  MapperReadApu = Map0_ReadApu;

  /* Callback at VSync */
  MapperVSync = Map0_VSync;

  /* Callback at HSync */
  MapperHSync = Map249_HSync;

  /* Callback at PPU */
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  /* Set SRAM Banks */
  W.SRAMBANK = S.SRAM;

  /* Set Registers */
  int i ;
for (i = 0; i < 8; i++ ) {
    Map249_Reg[i] = 0x00;
  }

  /* Set ROM Banks */
  W.ROMBANK0 = ROMPAGE( 0 );
  W.ROMBANK1 = ROMPAGE( 1 );
  W.ROMBANK2 = ROMLASTPAGE( 1 );
  W.ROMBANK3 = ROMLASTPAGE( 0 );



  /* Set PPU Banks */
  if ( S.NesHeader.VROMSize > 0 ) {
    int nPage ;
for (nPage = 0; nPage < 8; ++nPage )
      W.PPUBANK[ nPage ] = VROMPAGE( nPage );
    NESCore_Develop_Character_Data();
  }

  /* Set Registers */
  Map249_IRQ_Enable = 0;	// Disable
  Map249_IRQ_Counter = 0;
  Map249_IRQ_Latch = 0;
  Map249_IRQ_Request = 0;

  Map249_Spdata = 0;


 
}

コード例 #23

0

ファイルを表示

ファイル: InfoNES_Mapper_245.cpp プロジェクト: nothingzz/iphonenes

/*-------------------------------------------------------------------*/
void Map245_Init()
{
  /* Initialize Mapper */
  MapperInit = Map245_Init;

  /* Write to Mapper */
  MapperWrite = Map245_Write;

  /* Write to SRAM */
  MapperSram = Map0_Sram;

  /* Write to APU */
  MapperApu = Map0_Apu;

  /* Read from APU */
  MapperReadApu = Map0_ReadApu;

  /* Callback at VSync */
  MapperVSync = Map0_VSync;

  /* Callback at HSync */
  MapperHSync = Map245_HSync;

  /* Callback at PPU */
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map0_RenderScreen;

  /* Set SRAM Banks */
  SRAMBANK = SRAM;

  /* Set Registers */
  int i ;
for (i = 0; i < 8; i++ ) {
    Map245_Reg[i] = 0x00;
  }

  Map245_Prg0 = 0;
  Map245_Prg1 = 1;

  /* Set ROM Banks */
  ROMBANK0 = ROMPAGE( 0 );
  ROMBANK1 = ROMPAGE( 1 );
  ROMBANK2 = ROMLASTPAGE( 1 );
  ROMBANK3 = ROMLASTPAGE( 0 );

  /* Set PPU Banks */
  if ( NesHeader.byVRomSize > 0 ) {
    int nPage ;
for (nPage = 0; nPage < 8; ++nPage )
      PPUBANK[ nPage ] = VROMPAGE( nPage );
    InfoNES_SetupChr();
  }

  Map245_WeSram  = 0;		// Disable
  Map245_IRQ_Enable = 0;	// Disable
  Map245_IRQ_Counter = 0;
  Map245_IRQ_Latch = 0;
  Map245_IRQ_Request = 0;

  /* Set up wiring of the interrupt pin */
  K6502_Set_Int_Wiring( 1, 1 ); 
}

コード例 #24

0

ファイルを表示

ファイル: InfoNES_Mapper_005.cpp プロジェクト: nejidev/arm-NES-linux-

/*-------------------------------------------------------------------*/
void Map5_Init()
{
  int nPage;

  /* Initialize Mapper */
  MapperInit = Map5_Init;

  /* Write to Mapper */
  MapperWrite = Map5_Write;

  /* Write to SRAM */
  MapperSram = Map0_Sram;

  /* Write to APU */
  MapperApu = Map5_Apu;

  /* Read from APU */
  MapperReadApu = Map5_ReadApu;

  /* Callback at VSync */
  MapperVSync = Map0_VSync;

  /* Callback at HSync */
  MapperHSync = Map5_HSync;

  /* Callback at PPU */
  MapperPPU = Map0_PPU;

  /* Callback at Rendering Screen ( 1:BG, 0:Sprite ) */
  MapperRenderScreen = Map5_RenderScreen;

  /* Set SRAM Banks */
  SRAMBANK = SRAM;

  /* Set ROM Banks */
  ROMBANK0 = ROMLASTPAGE( 0 );
  ROMBANK1 = ROMLASTPAGE( 0 );
  ROMBANK2 = ROMLASTPAGE( 0 );
  ROMBANK3 = ROMLASTPAGE( 0 );

  /* Set PPU Banks */
  for ( nPage = 0; nPage < 8; ++nPage )
    PPUBANK[ nPage ] = VROMPAGE( nPage );
  InfoNES_SetupChr();

  /* Initialize State Registers */
  for ( nPage = 4; nPage < 8; ++nPage )
  {
    Map5_Prg_Reg[ nPage ] = ( NesHeader.byRomSize << 1 ) - 1;
    Map5_Wram_Reg[ nPage ] = 0xff;
  }
  Map5_Wram_Reg[ 3 ] = 0xff;

  for ( BYTE byPage = 4; byPage < 8; ++byPage )
  {
    Map5_Chr_Reg[ byPage ][ 0 ] = byPage;
    Map5_Chr_Reg[ byPage ][ 1 ] = ( byPage & 0x03 ) + 4;
  }

  InfoNES_MemorySet( Map5_Wram, 0x00, sizeof( Map5_Wram ) );
  InfoNES_MemorySet( Map5_Ex_Ram, 0x00, sizeof( Map5_Ex_Ram ) );
  InfoNES_MemorySet( Map5_Ex_Vram, 0x00, sizeof( Map5_Ex_Vram ) );
  InfoNES_MemorySet( Map5_Ex_Nam, 0x00, sizeof( Map5_Ex_Nam ) );

  Map5_Prg_Size = 3;
  Map5_Wram_Protect0 = 0;
  Map5_Wram_Protect1 = 0;
  Map5_Chr_Size = 3;
  Map5_Gfx_Mode = 0;

  Map5_IRQ_Enable = 0;
  Map5_IRQ_Status = 0;
  Map5_IRQ_Line = 0;

  /* Set up wiring of the interrupt pin */
  K6502_Set_Int_Wiring( 1, 1 ); 
}