void initializeSystem(void) {
CyGlobalIntEnable;
UART_Start();
PrISM_1_Start();
PrISM_2_Start();
Opamp_1_Start();
// Start the Bluetooth Stack
CyBle_Start(CustomEventHandler);
// Set up the LED. First set its output to be off so that the LED doesn't blink on.
// Then set the drive mode to strong.
PrISM_1_WritePulse0(255);
PrISM_1_WritePulse1(255);
PrISM_2_WritePulse0(255);
RED_SetDriveMode(RED_DM_STRONG);
GREEN_SetDriveMode(GREEN_DM_STRONG);
BLUE_SetDriveMode(BLUE_DM_STRONG);
// Start the ADC
ADC_SAR_Seq_Start();
ADC_SAR_Seq_StartConvert();
ADC_SAR_Seq_IRQ_Enable();
// Enable an interupt for when the ADC has data
ADC_SAR_Seq_IRQ_StartEx(ADC_SAR_Seq_ISR_LOC);
// Start the Timer for the ADC
ADC_Timer_Start();
elapsed = 0;
}
/*******************************************************************************
* Function Name: CyBtldrCommStart
********************************************************************************
*
* Summary:
* Starts the UART communication component
*
* Parameters:
* void
*
* Return:
* void
*
* Side Effects:
* None
*
*******************************************************************************/
void CyBtldrCommStart(void)
{
/* Start UART component and clear the TX,RX buffers */
UART_Start();
UART_SpiUartClearRxBuffer();
UART_SpiUartClearTxBuffer();
}
/***********************************Main***********************************/
int main()
{
int16 mav_data;
ADC_ISR_StartEx(ADC_interrupt);
CyGlobalIntEnable;
UART_Start(); /* Initialize ADC */
ADC_Start(); /* Initialize ADC */
ADC_StartConvert(); /* Start ADC conversions */
ADC_IRQ_Enable(); /* Enable ADC interrupts */
for (;;)
{
if(data_ready)
{
mav_data = mavg_filter(accgroen);
gradergroen = grader(mav_data);
//UART_UartPutChar(mav_data);
//UART_UartPutChar(mav_data>>8);
UART_UartPutChar(gradergroen);
UART_UartPutChar(gradergroen>>8);
data_ready = FALSE;
}
}
}
int main()
{
/* Place your initialization/startup code here (e.g. MyInst_Start()) */
ADC_DelSig_Start();
AMux_Start();
UART_Start();
CyGlobalIntEnable; /* Uncomment this line to enable global interrupts. */
// LCD_Char_Start();
//status = LCD_SegStat_Start();
CyDelay(10000u); //10 second delay to allow for sensors to "warm up"
//uint8 buffer[50];
//uint8 buffer2[50];
uint8 value[128];
for(;;)
{
/* Place your application code here. */
Radiation rad;
rad = take_radiation_reading();
Vaisala vais;
vais = take_Temp_RH_reading();
//LCD_Char_ClearDisplay();
//LCD_Char_Position(0u, 0u);
//sprintf(buffer,"%d %d %d %d", (int)fake.SW_In, (int)fake.SW_Out, (int)fake.LW_In, (int)fake.LW_Out);
//LCD_Char_PrintString(buffer);
//LCD_Char_Position(1u, 0u);
//sprintf(buffer2,"%d %d",(int)fake2.Temp, (int)fake2.RH);
//LCD_Char_PrintString(buffer2);
sprintf(value,"%d,%d,%d,%d,%d,%d,%d\r\n",(int)rad.SW_In, (int)rad.SW_Out, (int)rad.LW_In, (int)rad.LW_Out,(int)((rad.temp-273.15)*100), (int)(vais.Temp*100), (int)(vais.RH*100));
UART_PutString(value);
uint8 x = 0;
}
}
void initPSoC_Master(void){
tempTemp = 0;
tempSoilHum[0] = 0;
tempSoilHum[1] = 0;
tempSoilHum[2] = 0;
tempSoilHum[3] = 0;
tempSoilHum[4] = 0;
tempSoilHum[5] = 0;
// ISR
UART_ISR_StartEx(UART_ISR); // Starts UART interrupt component
timer_ISR_StartEx(timer_ISR); // Starts timer interrupt component
UART_Start(); // Starts UART component
Timer_Start(); // Starts timer component
// Setup of timer interrupt
uint32 maxPeriod = 0xFFFFFFFF; // The max period ((2^32)-1) = 179s
uint32 period = TIME_BETWEEN_TIMER_INT * 24000;
if (period > maxPeriod){
period = maxPeriod;
}
Timer_WritePeriod(period);
RedLED_Write(LED_OFF); // Turn off red LED
BlueLED_Write(LED_OFF); // Turn off blue LED
}
void main(void)
{
// Insert your main routine code here.
unsigned char c = 0;
M8C_EnableGInt;
UART_EnableInt();
UART_Start(UART_PARITY_NONE);
PGA_1_Start(PGA_1_HIGHPOWER);
ADCINC_Start(ADCINC_HIGHPOWER); // Apply power to the SC Block
ADCINC_GetSamples(0);
DAC6_Start(DAC6_HIGHPOWER);
PWM8_DisableInt();
PWM8_Start();
for(;;)
{
PWM8_WritePulseWidth(m_to_s_mem[0]);
DAC6_WriteBlind(m_to_s_mem[1]);
//if ( DELSIG8_bfStatus ) {
// DELSIG8_bfStatus = 0;
// s_to_m_mem[0] = DELSIG8_cResult;
//}
//ADCINC_GetSamples(1);
//while(ADCINC_fIsDataAvailable() == 0);
//s_to_m_mem[0] = ADCINC_bClearFlagGetData();
}
//mainloop:
// UART_SendData(temp++);
//while( ++temp2 );
//goto mainloop;
}
bool UART_CustomPortEnable(void)
{
UART_Start();
pinMode(D0, PERIPHERAL_IN);
pinMode(D1, PERIPHERAL_OUT);
return true;
}
/*******************************************************************************
* 初始化函数
********************************************************************************/
void init()
{
CyGlobalIntEnable; //全局中断开启
ADC_DelSig_1_Start(); /* 配置并开启ADC */
ADC_DelSig_1_StartConvert(); /* 开始进行转换 */
Uart_Rx_ISR_StartEx(RxInterruptHandler); /* 开启 Uart Rx 中断 并连接到 RxInterruptHandler */
Uart_Tx_ISR_StartEx(TxInterruptHandler); /* 开启 Uart Tx 并连接到 TxInterruptHandler */
UART_Start(); /* 开启 UART */
Uart_Rx_ISR_1_StartEx(Rx_1_InterruptHandler); /* 开启 Uart Rx 中断 并连接到 RxInterruptHandler */
Uart_Tx_ISR_1_StartEx(Tx_1_InterruptHandler); /* 开启 Uart Tx 并连接到 TxInterruptHandler */
UART_1_Start(); /* 开启 UART1 */
Uart_Rx_ISR_2_StartEx(Rx_1_InterruptHandler); /* 开启 Uart Rx 中断 并连接到 RxInterruptHandler */
Uart_Tx_ISR_2_StartEx(Tx_1_InterruptHandler); /* 开启 Uart Tx 并连接到 TxInterruptHandler */
UART_2_Start(); /* 开启 UART2 */
Timer_ISR_StartEx(TimerInterruptHandler); /* 开启 Timer 中断并连接到 TimerInterruptHandler */
Timer_Start(); /* 开启定时器 */
LCD_Char_1_Start(); /* 初始化并清除LCD */
//LCD_Char_1_PrintString("init");
}
int main()
{
char out_buffer[32];
CyGlobalIntEnable; /* Enable global interrupts. */
isr_wire_StartEx(wireHandler);
isr_uart_StartEx(uartHandler);
isr_stop_StartEx(stopHandler);
isr_wstart_StartEx(wstartHandler);
isr_ustart_StartEx(ustartHandler);
UART_Start();
uint16_t counter1, counter2;
for(;;)
{
counter1 = Timer_wire_ReadCounter();
sprintf(out_buffer,"Wired: %i:%i:%i:%i\n\r",wire.hour,wire.min,wire.sec, counter1);
UART_PutString(out_buffer);
counter2 = Timer_uart_ReadCounter();
sprintf(out_buffer,"Xbee: %i:%i:%i:%i\n\r",uart.hour,uart.min,uart.sec, counter2);
UART_PutString(out_buffer);
sprintf(out_buffer, "delta = %i\n\n\r", Timer_wire_ReadCounter()-Timer_uart_ReadCounter());
UART_PutString(out_buffer);
CyDelay(500);
}
}
int main()
{
char c;
int note=0; // current Notes
int printFlag=0; // if set to 0 it prints the notes when they change
CyGlobalIntEnable; /* Enable global interrupts. */
CySysTickStart();
Music_Start(0);
UART_Start();
sprintf(buff,"Started\n");
UART_UartPutString(buff);
for(;;)
{
c = UART_UartGetChar();
switch(c)
{
case 's':
UART_UartPutString("Start\n");
Music_PlaySong(0);
break;
case 'S':
UART_UartPutString("Stop\n");
Music_Stop();
break;
case 'p':
printFlag=0;
break;
case 'P':
printFlag = 1;
break;
case 't': // put it back to the default
Music_SetBPM(0);
break;
case 'T':
Music_SetBPM(60);
break;
case '1':
Music_PlaySong(0);
break;
case '2':
Music_PlaySong(1);
break;
}
if(note != Music_GetNote() && printFlag)
{
note = Music_GetNote();
sprintf(buff,"Note = %d\n",note);
UART_UartPutString(buff);
}
}
}
int main()
{
CyGlobalIntEnable; /* Enable global interrupts */
UART_RX_ISR_StartEx(RX_interrupt); /* Set interrupt address */
UART_BLE_RX_ISR_StartEx(BLE_RX_interrupt); /* Set interrupt address */
UART_Start(); /* Start UART */
UART_BLE_Start(); /* Start UART */
CySysPmSleep(); /* Enter Sleep mode */
return 0;
}
//start the relevant components
void hardware_init() {
PWM_Front_Start();
PWM_Rear_Start();
QuadDec_Front_Start();
QuadDec_Rear_Start();
QuadDec_Front_TriggerCommand(QuadDec_Front_MASK, QuadDec_Front_CMD_RELOAD);
QuadDec_Rear_TriggerCommand(QuadDec_Rear_MASK, QuadDec_Rear_CMD_RELOAD);
UART_Start();
Motor_Current_ADC_Start();
}
void serial_init(void)
{
UART_CmdReset(); // Initialize receiver/cmd
// buffer
UART_IntCntl(UART_ENABLE_RX_INT); // Enable RX interrupts
Counter8_WritePeriod(155); // Set up baud rate generator
Counter8_WriteCompareValue(77);
Counter8_Start(); // Turn on baud rate generator
UART_Start(UART_PARITY_NONE); // Enable UART
serial_cprint("\r\n:: Welcome to Kelvin [v0.1.1] ::");
}
void init_uart(void){
///UART////
UART_CmdReset();
UART_IntCntl(UART_ENABLE_RX_INT);
UART_Start(UART_PARITY_NONE);
UART_PutChar(12);
#ifdef UART_VERBOSE
UART_CPutString("\r\n\r\n\r\n\r\n\r\n\r\n waking up.......................................");
#endif
}
void main(void)
{
char opt;
// Make sure nCS is high before doing anything
nCS_HIGH;
// Enable user module interrupts
SleepTimer_EnableInt();
// Enable global interrutps
M8C_EnableGInt;
// Start the user modules
UART_Start(UART_PARITY_NONE);
UART_PutCRLF();
SPIM_Start(SPIM_SPIM_MODE_0 | SPIM_SPIM_MSB_FIRST);
SleepTimer_Start();
DAC8_Start(DAC8_FULLPOWER);
UART_CPutString("Synthesiszing waveforms\r\n");
WriteBlock(0);
WriteBlock(1);
WriteBlock(2);
WriteBlock(3);
while(1)
{
UART_CPutString("Synthetic wave output is on Port0[4]\r\nCowabunga Dude! Time to catch some waves.\r\n\r\n0. Play block 0\r\n1. Play block 1\r\n2. Play block 2\r\n3. Play block 3\r\n4. Test status register\r\n5. Test byte mode\r\n6. Test sequential mode\r\n");
opt = GetNumber(0, 6);
switch (opt)
{
case 4:
while(SPIRAM_StatusRegisterTest())
SleepTimer_SyncWait(4, SleepTimer_WAIT_RELOAD);
break;
case 5:
while(SPIRAM_ByteModeTest())
SleepTimer_SyncWait(4, SleepTimer_WAIT_RELOAD);
break;
case 6:
while(SPIRAM_SequentialModeTest())
SleepTimer_SyncWait(4, SleepTimer_WAIT_RELOAD);
break;
default:
PlayBlock(opt);
break;
}
}
}
void main(){
CYGlobalIntDisable;//Disable interrupts to avoid triggering during setup.
LCD_Start();// Start LCD.
UART_Start();// Start UART.
Rx_Int_Start();//Start the Interrupt.
Rx_Int_SetVector(Rx_ISR);//Set the Vector to the ISR.
LCD_PrintString("UART:RX ISR Demo");//Print to the LCD.
UART_PutString("UART:RX ISR Demo");//Print to Serial Terminal.
CyDelay(1000);
LCD_ClearDisplay();//Clear the screen for RX Data.
CYGlobalIntEnable;//Enable Interrupts,and let the Games begin!
for(;;);
}
uint8_t cypressInit(void){
WIZ_RST_Write(1);
SPIM_Start();
UART_Start();
init_printf(NULL,putdata);
//if(SW1_Read()) { // if button is not being pressed
LED_Write(0); // turn LED off
CyGlobalIntEnable;
return 1;
}
void main_test_display(){
UART_Start(); // initialize UART
UART_PutChar(0x81); // init connection; set to 16x12 image
struct disp_grid_81 disp;
disp_grid_init(&disp,0x3F); // init our display grid matrix to white
disp_grid_transmit(&disp);
struct tic_tac_ai tta;
tta_init(&tta,4,3,false,true); //first bool for player 1, second bool for player 2. true means is AI
disp_grid_init_ttc(&disp, tta.game.grid);
disp_grid_draw_tic(&disp,24,1,0x27); // draw tic
disp_grid_draw_win(&disp,27,9,1); // draw tic
disp_grid_draw_xia(&disp,26,16,0x30); // draw xia
disp_grid_transmit(&disp);
}
int main()
{
// striplights component init
StripLights_Start();
/* Start UART component and clear the TX,RX buffers */
UART_Start();
UART_SpiUartClearRxBuffer();
// Switch on ESP8266's PD function
CH_PD_SetDriveMode(CH_PD_DM_STRONG ) ;
CH_PD_Write(1);
// start UART for esp wifi
uWIFI_Start();
uWIFI_SpiUartClearRxBuffer();
CyGlobalIntEnable; /* Un/comment this line to dis/enable global interrupts. */
// LED output
P1_6_SetDriveMode(P1_6_DM_STRONG ) ;
// LED on.
P1_6_Write(1);
//cycle each of the primaries on all LED's, DisplayClear sets and pushes to LED's, MemoryClear just clears the buffer.
StripLights_DisplayClear( StripLights_RED_MASK ); CyDelay( 500 );
StripLights_DisplayClear( StripLights_GREEN_MASK ); CyDelay( 500 );
StripLights_DisplayClear( StripLights_BLUE_MASK ); CyDelay( 500 );
// Set to off
StripLights_DisplayClear( 0 );
// uncomment for echo back, useful to setup ESP8266 as well
//echo_uart();
run_server();
//reboot on return
CySoftwareReset();
return 0;
}
void main_play_ttc(){
LCD_Start(); // initialize lcd
LCD_ClearDisplay();
UART_Start(); // initialize UART
UART_PutChar(0x81); // init connection; set to 16x12 image
struct disp_grid_81 disp;
disp_grid_init(&disp,0x3F); // init our display grid matrix to white
disp_grid_transmit(&disp);
struct tic_tac_toe lolz;
ttc_init(&lolz,4,3);
disp_grid_init_ttc(&disp,lolz.grid); // init the board
disp_grid_draw_xia(&disp,26,16,0x30); // draw xia
disp_grid_transmit(&disp);
int x,y,z; int Values;
while (lolz.game_not_won == 0){
//Values = read_from_8255(Values);
Values = Pin3_Read();
if (Values >= 0 && Values <= 63){ //integer value
z = Values / 16;
x = Values % 4; //get row value
y = Values / 4 - z*4; //
LCD_ClearDisplay();
LCD_PrintNumber(Values);
LCD_PrintString(" x");
LCD_PrintNumber(x);
LCD_PrintString(" y");
LCD_PrintNumber(y);
LCD_PrintString(" z");
LCD_PrintNumber(z);
}
if (ttc_get_grid(&lolz,x,y,z) == 0){ // has not been accessed
ttc_step(&disp,&lolz,x,y,z); // step & print
disp_grid_transmit(&disp);
}
}
LCD_ClearDisplay();
LCD_Position(0,0); //move to bot row
LCD_PrintString("GAME OVER!");
}
int main()
{
char c;
int note=0; // current note
int printFlag=0; // if set to 0 it prints the notes when they change
CyGlobalIntEnable;
CySysTickStart();
Music_Start(0);
UART_Start();
UART_UartPutString("Started\n");
Music_AddSong(1,&scale);
for(;;)
{
c = UART_UartGetChar();
switch(c)
{
#ifdef Music_TWOCHANNELS
case 'b': Music_BuzzOn(300,0); break; // turn on the buzzer 1
case 'B': Music_BuzzOff(); break; // turn off the buzzer 1
case 'n': Music_BuzzOn(200,500); break; // turn on the buzzer for 500ms
#endif
case 'p': printFlag=0; break; // turn off the note printer
case 'P': printFlag = 1; break; // turn on the note printer
case 't': Music_SetBPM(0); break; // Put the song back to the default
case 'T': Music_SetBPM(60); break; // Put the current song to 60BPM
case '1': Music_PlaySong(0,0); break; // Play the 1st Song
case '2': Music_PlaySong(1,0); break; // Play the 2nd Song
case 's':
UART_UartPutString("Stop\n");
Music_Stop();
break;
}
if(note != Music_GetNote() && printFlag)
{
note = Music_GetNote();
sprintf(buff,"Note = %d\n",note);
UART_UartPutString(buff);
}
}
}
void Initial()
{
CyGlobalIntEnable;
//Check_Boot();
Timer_RTOS_Start();
PWM_Start();
I2C_Start();
UART_Start();
RTC_Start();
RTC_SetPeriod(1,1000);
RTOS_Start();
SetTask(Brightles_PID_Controll);
LCD_WS0010Start();
SetTask(WaitPowerStab);
SetTimerTask(OPT_Get_Result, 1300);
//BLE_Status();
GlobalStruct.OS_Status = 0;
SetTimerTask(Display_Controll, 2000);
}
void main_play_tta_ai(){
LCD_Start(); // initialize lcd
LCD_ClearDisplay();
UART_Start(); // initialize UART
UART_PutChar(0x81); // init connection; set to 16x12 image
struct disp_grid_81 disp;
disp_grid_init(&disp,0x3F); // init our display grid matrix to white
disp_grid_transmit(&disp);
int x,y,z; uint8 Values;
struct tic_tac_ai tta;
tta_init(&tta,4,3,true,false); //first bool for player 1, second bool for player 2
disp_grid_init_ttc(&disp, tta.game.grid);
disp_grid_draw_xia(&disp,26,16,0x30); // draw xia
disp_grid_transmit(&disp);
while (tta.game.game_not_won == 0){
Values = read_from_8255(Values); //read and print
if (Values >= 0 && Values <= 63){ //integer value
z = Values / 16;
x = Values % 4; //get row value
y = Values / 4 - z*4; //
// LCD_ClearDisplay();
// LCD_PrintNumber(Values);
// LCD_PrintString(" x");
// LCD_PrintNumber(x);
// LCD_PrintString(" y");
// LCD_PrintNumber(y);
// LCD_PrintString(" z");
// LCD_PrintNumber(z);
}
tta_step(&disp,&tta,x,y,z); //increment a turn
disp_grid_transmit(&disp);
}
LCD_ClearDisplay();
LCD_PrintString("GAME OVER!");
disp_grid_draw_win(&disp,27,9,tta.game.player); // draw tic
disp_grid_transmit(&disp);
}
/*******************************************************************************
* Function Name: main
********************************************************************************
*
* Summary:
* Main function.
*
* Parameters:
* None
*
* Return:
* None
*
*******************************************************************************/
int main()
{
CYBLE_API_RESULT_T apiResult;
CYBLE_STATE_T bleState;
CyGlobalIntEnable;
PWM_Start();
UART_Start();
UART_UartPutString("Welcome to BLE OOB Pairing Demo\r\n");
apiResult = CyBle_Start(StackEventHandler);
if(apiResult != CYBLE_ERROR_OK)
{
/* BLE stack initialization failed, check your configuration */
CYASSERT(0);
}
CyBle_IasRegisterAttrCallback(IasEventHandler);
for(;;)
{
/* Single API call to service all the BLE stack events. Must be
* called at least once in a BLE connection interval */
CyBle_ProcessEvents();
bleState = CyBle_GetState();
if(bleState != CYBLE_STATE_STOPPED &&
bleState != CYBLE_STATE_INITIALIZING)
{
/* Configure BLESS in DeepSleep mode */
CyBle_EnterLPM(CYBLE_BLESS_DEEPSLEEP);
/* Configure PSoC 4 BLE system in sleep mode */
CySysPmSleep();
/* BLE link layer timing interrupt will wake up the system */
}
}
}
int main()
{
hkj_timer t;
const uint16 myCharHandle = 0x0E;
uint8 writeData = 0;
CYBLE_GATT_VALUE_T writeValue = \
{ &writeData, sizeof(writeData), sizeof(writeData) };
CYBLE_GATTC_WRITE_REQ_T writeReqParam = \
{ .value = writeValue, .attrHandle = myCharHandle };
CYBLE_STACK_LIB_VERSION_T stackVersion;
CyGlobalIntEnable;
UART_Start();
hkj_debug_init();
CyBle_GetStackLibraryVersion(&stackVersion);
debug_print("Latency Central Stack: %u.%u.%u.%u\r\n", \
stackVersion.majorVersion, stackVersion.minorVersion, \
stackVersion.patch, stackVersion.buildNumber);
CyBle_Start(BleEventHandler);
hkj_timer_ms_init(&t);
while(1)
{
CyBle_ProcessEvents();
if (connHandle.bdHandle != 0)
{
if (hkj_timer_ms_get_delta(&t) > 500)
{
WRITE_CMD_PIN_Write(1);
CyBle_GattcWriteWithoutResponse(connHandle, &writeReqParam);
hkj_timer_ms_reset_delta(&t);
CyDelay(2);
WRITE_CMD_PIN_Write(0);
}
}
hkj_ble_events_log_debug_print();
}
}
void init() {
CyGlobalIntEnable;
rx_int_StartEx(RX_INT); // start RX interrupt (look for CY_ISR with RX_INT address)
// for code that writes received bytes to LCD.
UART_Start(); // initialize UART
UART_ClearRxBuffer();
// Init Electronic Components
PGA_TOP_GND_Start();
PGA_REF_Start();
PGA_GAIN_Start();
IDAC8_REF_Start();
ADC_SAR_1_Start();
//ADC_SAR_1_StartConvert();
// Init muxes
TOP_MUX_GND_Start();
TOP_MUX_VREF_Start();
BOTTOM_MUX_SENSE_Start();
zeroAllPins();
}
int main()
{
CyGlobalIntEnable; /* Enable global interrupts. */
// Set up LCD screen
LCD_Start();
LCD_ClearDisplay();
rx_isr_StartEx(rx_isr); // start RX interrupt (look for CY_ISR with RX_INT address)
// for code that writes received bytes to LCD.
UART_Start(); // initialize UART
UART_ClearRxBuffer();
// Check status message
UART_PutString("AT\r\n");
CyDelay(1000);\
LCD_ClearDisplay();
// Set name to VizDude
UART_PutString("AT+NAME=VizDude\r\n");
CyDelay(1000);\
LCD_ClearDisplay();
// Set rate to 115200 Baud, 1 stop bit, no parity
UART_PutString("AT+UART=115200,1,0\r\n");
CyDelay(1000);\
LCD_ClearDisplay();
/* Place your initialization/startup code here (e.g. MyInst_Start()) */
for(;;)
{
/* Place your application code here. */
}
}
int main(void) {
/* stop the watchdog timer */
WDTCTL = WDTPW + WDTHOLD;
/* set up the clocks for 1 mhz */
BCSCTL1 = CALBC1_1MHZ; // Set range
DCOCTL = CALDCO_1MHZ;
BCSCTL2 &= ~(DIVS_3); // SMCLK = DCO / 8 = 1Mhz
/* LEDs off, but we can use them for debugging if we want */
P1DIR |= RED_LED+GRN_LED;
P1OUT &= ~ (RED_LED + GRN_LED );
initUart();
/* Start listening for data */
UART_Start();
/* enable interrupts */
__bis_SR_register( GIE );
uartPrint("\n\rCli Started.\n\r");
cliHelp();
uartPrint(PROMPT);
char in_char;
while(1) {
while(rx_size() > 0) {
in_char = uartGetChar();
uartPutChar(in_char);
cli_input(in_char);
}
/* go to sleep and wait for data */
__bis_SR_register( LPM0_bits );
}
}
void CyBtldrCommStart(void) {
UART_Start();
}
void main(void)
{
M8C_EnableGInt ; // Uncomment this line to enable Global Interrupts
// Start the UART(with no parity), and Counter16
UART_Start(UART_PARITY_NONE);
// clock for moving serial
Counter16_Start();
// Start I2CHW
I2CHW_Start();
I2CHW_EnableMstr();
I2CHW_EnableInt();
// This is the command usage string
UART_CPutString("########################## I2C External SRAM ########################\r\n\
# W # XX T [Data]\r\n\
# W - Write command\r\n\
# # - Group Address (0 - 7)\r\n\
# XX - Memory Location in hex (00 - FF)\r\n\
# T - Data Type, either A for ASCII or H for Hexadecimal\r\n\
# Data - Either ASCII string or Hexadecimal separates by spaces\r\n\
#\t\t\tA - Mary had a little lamb\r\n\
#\t\t\tH - 01 FF A0 0F D8 C3\r\n\
#\r\n\
# R # XX T NN\r\n\
# R - Read command\r\n\
# # - Group Address (0 - 7)\r\n\
# XX - Memory Location in hex (00 - FF)\r\n\
# T - Data Type, either A for ASCII or H for Hexadecimal\r\n\
# NN - Number of bytes to read in hexadecimal\r\n\
#####################################################################\r\n");
while (1)
{
char *cmd;
char *params;
char slaveAddress = 0x50; // 010100000 R/W shifted to front
GetLine(buf, 79); // Retrieves a line with a maximum length of 70 characters and put it in buf.
memset(data, 0x00, 256); // Initialize all the set {data} to NULL bytes
cmd = Lowercase(cstrtok(buf, " ")); // Get the first word from the entered string and lowercase it.
if (strlen(cmd) == 1 && cmd[0] == 'w') // If the command is one letter and it is w, then write command
{
int groupAddress; // only 1 and 2 actually go to SRAM
int memLoc;
char dataType;
int len;
params = cstrtok(0x00, " "); // 0x00 indicates it will continue from last cstrtok command and get next word. This gets the next parameter
// csscanf if used to parse the string into values such as hexadecimal or integers
// It returns the number of parameters it parsed which should be one
// If the length of the params is not right or it does not parse the right amount, it returns an error
// %d gets an integer, this is the groupAddress
if (strlen(params) != 1 || csscanf(params, "%d", &groupAddress) != 1) goto error;
// %x gets a hexadecimal value, this can read capital or lowercase letters, this is the memory location
params = cstrtok(0x00, " ");
if (strlen(params) != 2 || csscanf(params, "%x", &memLoc) != 1) goto error;
// %c gets a character, the data type character
params = cstrtok(0x00, " ");
if (strlen(params) != 1 || csscanf(params, "%c", &dataType) != 1) goto error;
// This reads the rest of the string and stores it in params.
// If the length is zero or if cstrtok returns 0, this means that there was no valid string/hex entered
params = cstrtok(0x00, "\0");
if (strlen(params) == 0 || params == 0x00) goto error; // They did all the params but didn't write anything
dataType = tolower(dataType); // Lowercase the data type
if (groupAddress < 0 || groupAddress > 7)
goto error; // groupAddress was not in range
data[0] = memLoc; // First byte needs to be the memory location according to PCF8570 datasheet
slaveAddress |= groupAddress; // ORs the group 2 address to the group 1 address to get slaveAddress
if (dataType == 'a') // If the data type is ASCII
{
strcpy((data + 1), params); // Copy the string from params and put it right after the data[0] byte
len = strlen((data + 1)) + 1; // len is the number of bytes to write, it is the length of the string and then +1 because of the memLoc byte
// Cant just do strlen(data) because data[0] could be 0x00 and it would return 0 as the string length
}
else if (dataType == 'h') // If the data type is hex
{
// Take ASCII encoded hex data params and put it after data[0], returns number of bytes converted
if ((len = HexConversion(params, (data + 1))) == -1)
goto error;
len++; // Add one to the length because of the memLoc byte at data[0]
}
else
goto error;
I2CHW_bWriteBytes(slaveAddress, data, len, I2CHW_CompleteXfer); // Write len bytes from data
while (!(I2CHW_bReadI2CStatus() & I2CHW_WR_COMPLETE)); // Wait while it is writing
I2CHW_ClrWrStatus(); // Clear the write bit
csprintf(data, "%x bytes were written", len); // csprintf takes the string and substitutes %x for len, puts into data str
UART_PutString(data); // Print the string to UART
UART_PutCRLF();
}
else if (strlen(cmd) == 1 && cmd[0] == 'r') // If the command is one letter and it is r, then read command
{
int groupAddress;
int memLoc;
char dataType;
int numBytes;
char hexStr[4];
int i;
// csscanf if used to parse the string into values such as hexadecimal or integers
// It returns the number of parameters it parsed which should be one
// If the length of the params is not right or it does not parse the right amount, it returns an error
// %d gets an integer, this is the groupAddress
params = cstrtok(0x00, " ");
if (strlen(params) != 1 || csscanf(params, "%d", &groupAddress) != 1) goto error;
// %x gets a hexadecimal value, this can read capital or lowercase letters, this is the memory location
params = cstrtok(0x00, " ");
if (strlen(params) != 2 || csscanf(params, "%x", &memLoc) != 1) goto error;
// %c gets a character, the data type character
params = cstrtok(0x00, " ");
if (strlen(params) != 1 || csscanf(params, "%c", &dataType) != 1) goto error;
// %x gets a hexadecimal value, number of bytes to read
params = cstrtok(0x00, " ");
if (strlen(params) != 2 || csscanf(params, "%x", &numBytes) != 1) goto error;
// If there is any data after the number of bytes, then the format is invalid and it should return an error
if (cstrtok(0x00, " ") != 0x00) goto error;
dataType = tolower(dataType); // Lowercase the data type
if (groupAddress < 0 || groupAddress > 7)
goto error; // groupAddress was not in range
data[0] = memLoc; // First byte needs to be the memory location according to PCF8570 datasheet
slaveAddress |= groupAddress; // ORs the group 2 address to the group 1 address to get slaveAddress
I2CHW_bWriteBytes(slaveAddress, data, 1, I2CHW_NoStop); // Write one byte to the RAM, the slaveAddress so it knows who were talking to
while (!(I2CHW_bReadI2CStatus() & I2CHW_WR_COMPLETE)); // Wait while it is writing
I2CHW_ClrWrStatus(); // Clear the write bit
I2CHW_fReadBytes(slaveAddress, data, numBytes, I2CHW_CompleteXfer); // Read numBytes from the RAM, put it in data
while(!(I2CHW_bReadI2CStatus() & I2CHW_RD_COMPLETE)); // Wait while it is reading
I2CHW_ClrRdStatus(); // Clear the read bit
if (dataType == 'a') // If the data type is ASCII
{
for (i = 0; i < numBytes; ++i) // Loop through each byte
UART_PutChar(data[i]); // Put the character in PuTTy
UART_PutCRLF();
}
else if (dataType == 'h') // If the data type is Hex
{
for (i = 0; i < numBytes; ++i) // Loop through each byte
{
csprintf(hexStr, "%X ", data[i]); // csprintf prints into hexStr a hexadecimal with a space
UART_PutString(hexStr); // Print hexStr
}
UART_PutCRLF();
}
else
goto error;
}
else
goto error;
continue; // This is so that the error is skipped when everything goes right
error: // This outputs an invalid format message and continues on to read another line
UART_CPutString("Invalid format entered. Valid formats are:\r\n\tW [GroupAddress] [MemoryLocation] [h|a] Hex/ASCII\r\n\tR [GroupAddress] [MemoryLocation] [h|a] [NumBytes]\r\n");
}
}
