int SPIBus::SendDataBit(int b)
{
clearSCK(); //si assicura che SCK low
bitMOSI(b);
WaitUsec(shot_delay);
setSCK(); //AT90s latch data bit now!
WaitUsec(shot_delay);
clearSCK();
return OK;
}
// ritorna un numero negativo se c'e` un errore, altrimenti 0 o 1
int SPIBus::RecDataBit()
{
register UBYTE b;
clearSCK(); //si assicura SCK low
WaitUsec(shot_delay);
setSCK();
WaitUsec(shot_delay);
b = getMISO();
clearSCK();
return b;
}
/*
* ATA (soft) reset
*/
EXPORT void ataReset(DrvTab *drv)
{
UW iob = drv->IOB;
UW reg, tm;
BOOL master;
/* Set it to drive 0 */
ataSetDrive(drv, 0);
/* Check the existence of drive 0 (Master) */
master = (InB(REG_DRVHEAD) == 0xff && InB(REG_STS) == 0xff) ?
FALSE : TRUE;
/* Reset pulse output */
reg = (drv->d.pcc.IOConf[0] & IOC_IO2_NONE)? REG_DEVCTL : REG_DEVCTL2;
OutB(reg, dcSRST);
WaitUsec(20); /* Wait for "20 usec" */
OutB(reg, dcNORM);
/* Wait until it becomes ready status:
Firstly set it to drive 1 when there is no "Master" */
for (tm = 0;;) {
if (master == TRUE || ataSetDrive(drv, 0x100) == E_OK) {
if ((ataStatusIn(drv) & stBSY) == 0) break;
}
if (drv->Spec.pccard && ataStatusIn(drv) == 0xff) break;
/* There is no card */
if (sdChkTmout(&tm, RESET_TMO, 10)) break;
}
/* Set Drive (Master & Slave) to the reset status */
if (drv->Top != NULL) drv = drv->Top;
for (; drv != NULL; drv = drv->Next) drv->Reset = TRUE;
}
/*
* Status check
*/
LOCAL W ataChkSts(DrvTab *drv, UB chk, UB ok)
{
UW iob = drv->IOB;
W i;
for (i = 0; i < STATUS_TMO; i += 10, WaitUsec(10)) {
if ((InB(REG_STS) & chk) == ok) return E_OK;
}
return ERR_DATABUSY;
}
/*
* Drive setting
*/
EXPORT ER ataSetDrive(DrvTab *drv, W drvno)
{
UW iob = drv->IOB;
UB dno;
if (drvno < 0) drvno = drv->DrvNo;
OutB(REG_DRVHEAD, dno = drDRV(drvno));
WaitUsec(4); /* Waiting is necessary depending on drive */
if (InB(REG_DRVHEAD) == dno) return E_OK;
return ERR_NOPORT;
}
