kern_return_t
processor_control(
processor_t processor,
processor_info_t info,
mach_msg_type_number_t count)
{
if (processor == PROCESSOR_NULL)
return(KERN_INVALID_ARGUMENT);
return(cpu_control(processor->cpu_id, info, count));
}
/*
* arm32_vector_init:
*
* Initialize the vector page, and select whether or not to
* relocate the vectors.
*
* NOTE: We expect the vector page to be mapped at its expected
* destination.
*/
void
arm32_vector_init(vaddr_t va, int which)
{
extern unsigned int page0[], page0_data[];
unsigned int *vectors = (unsigned int *) va;
unsigned int *vectors_data = vectors + (page0_data - page0);
int vec;
/*
* Loop through the vectors we're taking over, and copy the
* vector's insn and data word.
*/
for (vec = 0; vec < ARM_NVEC; vec++) {
if ((which & (1 << vec)) == 0) {
/* Don't want to take over this vector. */
continue;
}
vectors[vec] = page0[vec];
vectors_data[vec] = page0_data[vec];
}
/* Now sync the vectors. */
cpu_icache_sync_range(va, (ARM_NVEC * 2) * sizeof(u_int));
vector_page = va;
if (va == ARM_VECTORS_HIGH) {
/*
* Assume the MD caller knows what it's doing here, and
* really does want the vector page relocated.
*
* Note: This has to be done here (and not just in
* cpu_setup()) because the vector page needs to be
* accessible *before* cpu_startup() is called.
* Think ddb(9) ...
*
* NOTE: If the CPU control register is not readable,
* this will totally fail! We'll just assume that
* any system that has high vector support has a
* readable CPU control register, for now. If we
* ever encounter one that does not, we'll have to
* rethink this.
*/
cpu_control(CPU_CONTROL_VECRELOC, CPU_CONTROL_VECRELOC);
}
}
void *
initarm(struct arm_boot_params *abp)
{
struct pv_addr kernel_l1pt;
int loop;
u_int l1pagetable;
vm_offset_t freemempos;
vm_offset_t afterkern;
vm_offset_t lastaddr;
int i;
uint32_t memsize;
boothowto = 0; /* Likely not needed */
lastaddr = parse_boot_param(abp);
i = 0;
set_cpufuncs();
cpufuncs.cf_sleep = s3c24x0_sleep;
pcpu0_init();
/* Do basic tuning, hz etc */
init_param1();
#define KERNEL_TEXT_BASE (KERNBASE)
freemempos = (lastaddr + PAGE_MASK) & ~PAGE_MASK;
/* Define a macro to simplify memory allocation */
#define valloc_pages(var, np) \
alloc_pages((var).pv_va, (np)); \
(var).pv_pa = (var).pv_va + (KERNPHYSADDR - KERNVIRTADDR);
#define alloc_pages(var, np) \
(var) = freemempos; \
freemempos += (np * PAGE_SIZE); \
memset((char *)(var), 0, ((np) * PAGE_SIZE));
while (((freemempos - L1_TABLE_SIZE) & (L1_TABLE_SIZE - 1)) != 0)
freemempos += PAGE_SIZE;
valloc_pages(kernel_l1pt, L1_TABLE_SIZE / PAGE_SIZE);
for (loop = 0; loop < NUM_KERNEL_PTS; ++loop) {
if (!(loop % (PAGE_SIZE / L2_TABLE_SIZE_REAL))) {
valloc_pages(kernel_pt_table[loop],
L2_TABLE_SIZE / PAGE_SIZE);
} else {
kernel_pt_table[loop].pv_va = freemempos -
(loop % (PAGE_SIZE / L2_TABLE_SIZE_REAL)) *
L2_TABLE_SIZE_REAL;
kernel_pt_table[loop].pv_pa =
kernel_pt_table[loop].pv_va - KERNVIRTADDR +
KERNPHYSADDR;
}
}
/*
* Allocate a page for the system page mapped to V0x00000000
* This page will just contain the system vectors and can be
* shared by all processes.
*/
valloc_pages(systempage, 1);
/* Allocate stacks for all modes */
valloc_pages(irqstack, IRQ_STACK_SIZE);
valloc_pages(abtstack, ABT_STACK_SIZE);
valloc_pages(undstack, UND_STACK_SIZE);
valloc_pages(kernelstack, KSTACK_PAGES);
valloc_pages(msgbufpv, round_page(msgbufsize) / PAGE_SIZE);
/*
* Now we start construction of the L1 page table
* We start by mapping the L2 page tables into the L1.
* This means that we can replace L1 mappings later on if necessary
*/
l1pagetable = kernel_l1pt.pv_va;
/* Map the L2 pages tables in the L1 page table */
pmap_link_l2pt(l1pagetable, ARM_VECTORS_HIGH,
&kernel_pt_table[KERNEL_PT_SYS]);
for (i = 0; i < KERNEL_PT_KERN_NUM; i++)
pmap_link_l2pt(l1pagetable, KERNBASE + i * L1_S_SIZE,
&kernel_pt_table[KERNEL_PT_KERN + i]);
pmap_map_chunk(l1pagetable, KERNBASE, PHYSADDR,
(((uint32_t)(lastaddr) - KERNBASE) + PAGE_SIZE) & ~(PAGE_SIZE - 1),
VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
afterkern = round_page((lastaddr + L1_S_SIZE) & ~(L1_S_SIZE
- 1));
for (i = 0; i < KERNEL_PT_AFKERNEL_NUM; i++) {
pmap_link_l2pt(l1pagetable, afterkern + i * L1_S_SIZE,
&kernel_pt_table[KERNEL_PT_AFKERNEL + i]);
}
/* Map the vector page. */
pmap_map_entry(l1pagetable, ARM_VECTORS_HIGH, systempage.pv_pa,
VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
/* Map the stack pages */
pmap_map_chunk(l1pagetable, irqstack.pv_va, irqstack.pv_pa,
IRQ_STACK_SIZE * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
pmap_map_chunk(l1pagetable, abtstack.pv_va, abtstack.pv_pa,
ABT_STACK_SIZE * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
pmap_map_chunk(l1pagetable, undstack.pv_va, undstack.pv_pa,
UND_STACK_SIZE * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
pmap_map_chunk(l1pagetable, kernelstack.pv_va, kernelstack.pv_pa,
KSTACK_PAGES * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
pmap_map_chunk(l1pagetable, kernel_l1pt.pv_va, kernel_l1pt.pv_pa,
L1_TABLE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_PAGETABLE);
pmap_map_chunk(l1pagetable, msgbufpv.pv_va, msgbufpv.pv_pa,
msgbufsize, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
for (loop = 0; loop < NUM_KERNEL_PTS; ++loop) {
pmap_map_chunk(l1pagetable, kernel_pt_table[loop].pv_va,
kernel_pt_table[loop].pv_pa, L2_TABLE_SIZE,
VM_PROT_READ|VM_PROT_WRITE, PTE_PAGETABLE);
}
arm_devmap_bootstrap(l1pagetable, s3c24x0_devmap);
cpu_domains((DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL*2)) | DOMAIN_CLIENT);
setttb(kernel_l1pt.pv_pa);
cpu_tlb_flushID();
cpu_domains(DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL*2));
/*
* Pages were allocated during the secondary bootstrap for the
* stacks for different CPU modes.
* We must now set the r13 registers in the different CPU modes to
* point to these stacks.
* Since the ARM stacks use STMFD etc. we must set r13 to the top end
* of the stack memory.
*/
cpu_control(CPU_CONTROL_MMU_ENABLE, CPU_CONTROL_MMU_ENABLE);
set_stackptrs(0);
/*
* We must now clean the cache again....
* Cleaning may be done by reading new data to displace any
* dirty data in the cache. This will have happened in setttb()
* but since we are boot strapping the addresses used for the read
* may have just been remapped and thus the cache could be out
* of sync. A re-clean after the switch will cure this.
* After booting there are no gross reloations of the kernel thus
* this problem will not occur after initarm().
*/
cpu_idcache_wbinv_all();
/* Disable all peripheral interrupts */
ioreg_write32(S3C24X0_INTCTL_BASE + INTCTL_INTMSK, ~0);
memsize = board_init();
/* Find pclk for uart */
switch(ioreg_read32(S3C24X0_GPIO_BASE + GPIO_GSTATUS1) >> 16) {
case 0x3241:
s3c2410_clock_freq2(S3C24X0_CLKMAN_BASE, NULL, NULL,
&s3c2410_pclk);
break;
case 0x3244:
s3c2440_clock_freq2(S3C24X0_CLKMAN_BASE, NULL, NULL,
&s3c2410_pclk);
break;
}
cninit();
/* Set stack for exception handlers */
data_abort_handler_address = (u_int)data_abort_handler;
prefetch_abort_handler_address = (u_int)prefetch_abort_handler;
undefined_handler_address = (u_int)undefinedinstruction_bounce;
undefined_init();
init_proc0(kernelstack.pv_va);
arm_vector_init(ARM_VECTORS_HIGH, ARM_VEC_ALL);
pmap_curmaxkvaddr = afterkern + 0x100000 * (KERNEL_PT_KERN_NUM - 1);
arm_dump_avail_init(memsize, sizeof(dump_avail) / sizeof(dump_avail[0]));
vm_max_kernel_address = KERNVIRTADDR + 3 * memsize;
pmap_bootstrap(freemempos, &kernel_l1pt);
msgbufp = (void*)msgbufpv.pv_va;
msgbufinit(msgbufp, msgbufsize);
mutex_init();
physmem = memsize / PAGE_SIZE;
phys_avail[0] = virtual_avail - KERNVIRTADDR + KERNPHYSADDR;
phys_avail[1] = PHYSADDR + memsize;
phys_avail[2] = 0;
phys_avail[3] = 0;
init_param2(physmem);
kdb_init();
return ((void *)(kernelstack.pv_va + USPACE_SVC_STACK_TOP -
sizeof(struct pcb)));
}
/*
* arm32_vector_init:
*
* Initialize the vector page, and select whether or not to
* relocate the vectors.
*
* NOTE: We expect the vector page to be mapped at its expected
* destination.
*/
void
arm32_vector_init(vaddr_t va, int which)
{
#if defined(CPU_ARMV7) || defined(CPU_ARM11) || defined(ARM_HAS_VBAR)
/*
* If this processor has the security extension, don't bother
* to move/map the vector page. Simply point VBAR to the copy
* that exists in the .text segment.
*/
#ifndef ARM_HAS_VBAR
if (va == ARM_VECTORS_LOW
&& (armreg_pfr1_read() & ARM_PFR1_SEC_MASK) != 0) {
#endif
extern const uint32_t page0rel[];
vector_page = (vaddr_t)page0rel;
KASSERT((vector_page & 0x1f) == 0);
armreg_vbar_write(vector_page);
#ifdef VERBOSE_INIT_ARM
printf(" vbar=%p", page0rel);
#endif
cpu_control(CPU_CONTROL_VECRELOC, 0);
return;
#ifndef ARM_HAS_VBAR
}
#endif
#endif
#ifndef ARM_HAS_VBAR
if (CPU_IS_PRIMARY(curcpu())) {
extern unsigned int page0[], page0_data[];
unsigned int *vectors = (int *) va;
unsigned int *vectors_data = vectors + (page0_data - page0);
int vec;
/*
* Loop through the vectors we're taking over, and copy the
* vector's insn and data word.
*/
for (vec = 0; vec < ARM_NVEC; vec++) {
if ((which & (1 << vec)) == 0) {
/* Don't want to take over this vector. */
continue;
}
vectors[vec] = page0[vec];
vectors_data[vec] = page0_data[vec];
}
/* Now sync the vectors. */
cpu_icache_sync_range(va, (ARM_NVEC * 2) * sizeof(u_int));
vector_page = va;
}
if (va == ARM_VECTORS_HIGH) {
/*
* Assume the MD caller knows what it's doing here, and
* really does want the vector page relocated.
*
* Note: This has to be done here (and not just in
* cpu_setup()) because the vector page needs to be
* accessible *before* cpu_startup() is called.
* Think ddb(9) ...
*
* NOTE: If the CPU control register is not readable,
* this will totally fail! We'll just assume that
* any system that has high vector support has a
* readable CPU control register, for now. If we
* ever encounter one that does not, we'll have to
* rethink this.
*/
cpu_control(CPU_CONTROL_VECRELOC, CPU_CONTROL_VECRELOC);
}
#endif
}