static int ftpc_sendfile(struct ftpc_session_s *session, const char *path,
FILE *stream, uint8_t how, uint8_t xfrmode)
{
long offset = session->offset;
#ifdef CONFIG_DEBUG
FAR char *rname;
FAR char *str;
int len;
#endif
int ret;
session->offset = 0;
/* Were we asked to store a file uniquely? Does the host support the STOU
* command?
*/
if (how == FTPC_PUT_UNIQUE && !FTPC_HAS_STOU(session))
{
/* We cannot store a file uniquely */
return ERROR;
}
ftpc_xfrreset(session);
FTPC_SET_PUT(session);
/* Initialize for the transfer */
ret = ftpc_xfrinit(session);
if (ret != OK)
{
return ERROR;
}
ftpc_xfrmode(session, xfrmode);
/* The REST command sets the start position in the file. Some servers
* allow REST immediately before STOR for binary files.
*/
if (offset > 0)
{
ret = ftpc_cmd(session, "REST %ld", offset);
session->size = offset;
}
/* Send the file using STOR, STOU, or APPE:
*
* - STOR request asks the server to receive the contents of a file from
* the data connection already established by the client.
* - APPE is just like STOR except that, if the file already exists, the
* server appends the client's data to the file.
* - STOU is just like STOR except that it asks the server to create a
* file under a new pathname selected by the server. If the server
* accepts STOU, it provides the pathname in a human-readable format in
* the text of its response.
*/
switch (how)
{
case FTPC_PUT_UNIQUE:
{
ret = ftpc_cmd(session, "STOU %s", path);
/* Check for "502 Command not implemented" */
if (session->code == 502)
{
/* The host does not support the STOU command */
FTPC_CLR_STOU(session);
return ERROR;
}
/* Get the remote filename from the response */
#ifdef CONFIG_DEBUG
str = strstr(session->reply, " for ");
if (str)
{
str += 5;
len = strlen(str);
if (len)
{
if (*str == '\'')
{
rname = strndup(str+1, len-3);
}
else
{
rname = strndup(str, len-1);
nvdbg("Unique filename is: %s\n", rname);
}
free(rname);
}
}
#endif
}
break;
case FTPC_PUT_APPEND:
ret = ftpc_cmd(session, "APPE %s", path);
break;
case FTPC_PUT_NORMAL:
default:
ret = ftpc_cmd(session, "STOR %s", path);
break;
}
/* If the server is willing to create a new file under that name, or
* replace an existing file under that name, it responds with a mark
* using code 150:
*
* - "150 File status okay; about to open data connection"
*
* It then attempts to read the contents of the file from the data
* connection, and closes the data connection. Finally it accepts the STOR
* with:
*
* - "226 Closing data connection" if the entire file was successfully
* received and stored
*
* Or rejects the STOR with:
*
* - "425 Can't open data connection" if no TCP connection was established
* - "426 Connection closed; transfer aborted" if the TCP connection was
* established but then broken by the client or by network failure
* - "451 Requested action aborted: local error in processing",
* "452 - Requested action not taken", or "552 Requested file action
* aborted" if the server had trouble saving the file to disk.
*
* The server may reject the STOR request with:
*
* - "450 Requested file action not taken", "452 - Requested action not
* taken" or "553 Requested action not taken" without first responding
* with a mark.
*/
/* In active mode, we need to accept a connection on the data socket
* (in passive mode, we have already connected the data channel to
* the FTP server).
*/
if (!FTPC_IS_PASSIVE(session))
{
ret = ftpc_sockaccept(&session->data);
if (ret != OK)
{
ndbg("Data connection not accepted\n");
return ERROR;
}
}
/* Then perform the data transfer */
if (xfrmode == FTPC_XFRMODE_ASCII)
{
ret = ftpc_sendtext(session, stream, session->data.outstream);
}
else
{
ret = ftpc_sendbinary(session, stream, session->data.outstream);
}
ftpc_sockflush(&session->data);
ftpc_sockclose(&session->data);
if (ret == 0)
{
fptc_getreply(session);
}
return OK;
}
int ftpc_xfrabort(FAR struct ftpc_session_s *session, FAR FILE *stream)
{
FAR struct pollfd fds;
int ret;
/* Make sure that we are still connected */
if (!ftpc_connected(session))
{
return ERROR;
}
/* Check if there is data waiting to be read from the cmd channel */
fds.fd = session->cmd.sd;
fds.events = POLLIN;
ret = poll(&fds, 1, 0);
if (ret > 0)
{
/* Read data from command channel */
nvdbg("Flush cmd channel data\n");
while (stream && fread(session->buffer, 1, CONFIG_FTP_BUFSIZE, stream) > 0);
return OK;
}
FTPC_SET_INTERRUPT(session);
/* Send the Telnet interrupt sequence to abort the transfer:
* <IAC IP><IAC DM>ABORT<CR><LF>
*/
nvdbg("Telnet ABORt sequence\n");
ftpc_sockprintf(&session->cmd, "%c%c", TELNET_IAC, TELNET_IP); /* Interrupt process */
ftpc_sockprintf(&session->cmd, "%c%c", TELNET_IAC, TELNET_DM); /* Telnet synch signal */
ftpc_sockprintf(&session->cmd, "ABOR\r\n"); /* Abort */
ftpc_sockflush(&session->cmd);
/* Read remaining bytes from connection */
while (stream && fread(session->buffer, 1, CONFIG_FTP_BUFSIZE, stream) > 0);
/* Get the ABORt reply */
fptc_getreply(session);
/* Expected replys are: "226 Closing data connection" or
* "426 Connection closed; transfer aborted"
*/
if (session->code != 226 && session->code != 426)
{
nvdbg("Expected 226 or 426 reply\n");
}
else
{
/* Get the next reply */
fptc_getreply(session);
/* Expected replys are: or "225 Data connection open; no transfer in progress"
* "226 Closing data connection"
*/
if (session->code != 226 && session->code != 225)
{
nvdbg("Expected 225 or 226 reply\n");
}
}
return ERROR;
}
int ftpc_getfile(SESSION handle, FAR const char *rname, FAR const char *lname,
uint8_t how, uint8_t xfrmode)
{
FAR struct ftpc_session_s *session = (FAR struct ftpc_session_s *)handle;
struct stat statbuf;
FILE *loutstream;
FAR char *abslpath;
off_t offset;
int ret;
/* Don't call this with a NULL remote file name */
DEBUGASSERT(rname);
/* If the local name is not specified, then it is assumed to the same as
* the remote file name.
*/
if (!lname)
{
lname = rname;
}
/* Get the full path to the local file */
abslpath = ftpc_abslpath(session, lname);
if (!abslpath)
{
ndbg("ftpc_abslpath(%s) failed: %d\n", errno);
goto errout;
}
/* Get information about the local file */
ret = stat(abslpath, &statbuf);
if (ret == 0)
{
/* It already exists. Is it a directory? */
if (S_ISDIR(statbuf.st_mode))
{
ndbg("'%s' is a directory\n", abslpath);
goto errout_with_abspath;
}
}
/* Is it write-able? */
#ifdef S_IWRITE
if (!(statbuf.st_mode & S_IWRITE))
{
ndbg("'%s' permission denied\n", abslpath);
goto errout_with_abspath;
}
#endif
/* Are we resuming the transfers? Is so then the starting offset is the
* size of the existing, partial file.
*/
if (how == FTPC_GET_RESUME)
{
offset = statbuf.st_size;
}
else
{
offset = 0;
}
/* Setup to receive the file */
ret = ftpc_recvinit(session, rname, xfrmode, offset);
if (ret != OK)
{
ndbg("ftpc_recvinit failed\n");
goto errout_with_abspath;
}
loutstream = fopen(abslpath, (offset > 0 || (how == FTPC_GET_APPEND)) ? "a" : "w");
if (!loutstream)
{
ndbg("fopen failed: %d\n", errno);
goto errout_with_abspath;
}
/* If the offset is non-zero, then seek to that offset in the file */
if (offset > 0)
{
ret = fseek(loutstream, offset, SEEK_SET);
if (ret != OK)
{
ndbg("fseek failed: %d\n", errno);
goto errout_with_outstream;
}
}
/* And receive the new file data */
if (xfrmode == FTPC_XFRMODE_ASCII)
{
ret = ftpc_recvtext(session, session->data.instream, loutstream);
}
else
{
ret = ftpc_recvbinary(session, session->data.instream, loutstream);
}
ftpc_sockclose(&session->data);
if (ret == 0)
{
fptc_getreply(session);
}
/* Check for success */
if (ret == OK && !FTPC_INTERRUPTED(session))
{
fclose(loutstream);
free(abslpath);
return OK;
}
/* Various error exits */
errout_with_outstream:
fclose(loutstream);
errout_with_abspath:
free(abslpath);
session->offset = 0;
errout:
return ERROR;
}
