コード例 #1
0
ファイル: main.c プロジェクト: jingjinghaha/JPEGDecoder
int main (void)
{
	// Sync with the monitor.
	mk_mon_sync();
	// Enable stack checking.
	start_stack_check();

	begin_use();
	end_use();
   mk_mon_debug_info(0x00444D41);//start of DMA_counters
   //print the dma_counters according to the following order here
     mk_mon_debug_info(to_core1);
     mk_mon_debug_info(to_core2);
     mk_mon_debug_info(to_core3);
     mk_mon_debug_info(to_core4);
     mk_mon_debug_info(to_DDR);
     mk_mon_debug_info(from_core1);
     mk_mon_debug_info(from_core2);
     mk_mon_debug_info(from_core3);
     mk_mon_debug_info(from_core4);
     mk_mon_debug_info(from_DDR);
   mk_mon_debug_info(0xFF444D41);//end of DMA_counters
	// Signal the monitor we are done.
	mk_mon_debug_tile_finished();
	return 0;
}
コード例 #2
0
int main (void)
{
	// Sync with the monitor.
	mk_mon_sync();
	// Enable stack checking.
	start_stack_check();
	
	/* 2. Benchmarking stuff (to measure usage of communication memory) */
	{
	    bench_mark_fill_pattern_to_cmem();
	}
	/* End of Benchmarking stuff before starting decoding */
	
	/* 2. Only benchmark related shared variables, (also includes variables for receiving start and sending stop signal) */
	volatile unsigned int *mb3_end = (unsigned int*)(mb3_cmemout0_BASEADDR + mb3_cmemout0_SIZE - 2*sizeof(unsigned int));
	volatile unsigned int *mb3_start = (unsigned int*)(mb3_cmemin0_BASEADDR + mb3_cmemin0_SIZE - sizeof(unsigned int));	
	int num_of_dma = 0; 
	/* End of sync variables */
	
	/* 3. Wait for start signal from MB1 */
	*mb3_start = 0;
	while(*((volatile int*)mb3_start) != 1);
	
	/* 4. All code pertaining to jpeg decoder below this line */
	{
	   /* Call your application function here */   
	   tile_main();
	}
	/* End of the jpeg decoder function -*"No code pertaining to decoder beyond this line apart from sending end of job flags to MB1 and benchmarking stuff "*- */
	
	/* 5. Signal MB1 that work is finished in MB3 */
	*mb3_end = 1;
	DMA_SEND_BLOCKING((unsigned int*)(mb1_cmemin3_pt_REMOTEADDR + mb1_cmemin3_SIZE - 2*sizeof(unsigned int)), mb3_end, 1, (void *)(mb3_dma1_BASEADDR),DMA_flag); //core 3 finish flag
	
	/* 11. Code to compute number of DMA channels used in MB1 */
	switch(DMA_flag)
	{
	   case(0X00) : num_of_dma = 0; break;
	   case(0X0F) : num_of_dma = 1; break;
	   case(0XF0) : num_of_dma = 1; break;
	   case(0XFF) : num_of_dma = 2; break;
	   default: num_of_dma = -1;
	}
	
	/* 6. Benchmarking display code starts here */ 
	mk_mon_error(0XB2, num_of_dma);  // Displays the total number of DMA send and receive calls performed in MB3
	mk_mon_error(0XB3, bench_mark_measure_cmem_usage()); // Displays the size of communication memory used by MB3
    mk_mon_error(0XB4, bench_dyna_mem_size); // Displays the size of dynamic memory used by MB3
	
	mk_mon_debug_tile_finished();
	return 0;
}
コード例 #3
0
ファイル: jpegtobmp.c プロジェクト: jingjinghaha/JPEGDecoder
int main (void)
{
	// Sync with the monitor.
	mk_mon_sync();
	// Enable stack checking.
	start_stack_check();
	begin_use();
    JpegToBmp();
	end_use();
	// Signal the monitor we are done.
	mk_mon_debug_tile_finished();
	return 0;
}
コード例 #4
0
ファイル: main.c プロジェクト: Delan90/JPEG_Decoder_on_FPGA
int main (void)
{
	// Sync with the monitor.
	mk_mon_sync();
	// Enable stack checking.
	start_stack_check();

    jpeg_dec_main();
	
	
	// Signal the monitor we are done.
	mk_mon_debug_tile_finished();
	return 0;
}
コード例 #5
0
ファイル: main.c プロジェクト: jingjinghaha/JPEGDecoder
int main (void)
{
	// Sync with the monitor.
	mk_mon_sync();
	// Enable stack checking.
	start_stack_check();
// /*	
	begin_use();

	int output = JpegToBmp();
	
	mk_mon_debug_info(output);

	// Signal the monitor we are done.
	end_use();
// */
	mk_mon_debug_tile_finished();
	return 0;
}
コード例 #6
0
ファイル: main.c プロジェクト: Delan90/JPEG_Decoder_on_FPGA
int main (void)
{
	// Sync with the monitor.
	mk_mon_sync();
	TIME t1,t2,diff;
	
	// Enable stack checking.
	start_stack_check();
	
	clear_frame_buffer();
	
	t1 = hw_tifu_systimer_get(); 
	
    /*Initalize the C-Heap communication*/

    /* FBlock is used as token for communication between Core1 & Core2 */
    unsigned int token_size = sizeof(FBlock);

    /* FIFO can store 6 tokens. */
    unsigned int fifo_size = 1;

    /*Init FiFo*/
    cheap_init_fifo(producer, consumer, token_size, fifo_size, (unsigned int)producer_data, (unsigned int) consumer_data,
            mb1_dma1_BASEADDR, mb1_cmemout1_BASEADDR,
            mb2_dma1_BASEADDR, mb2_cmemout1_BASEADDR);


    /* signal to core 2 that the FIFO is initialized and can be read from. */
    *fifo_sync_data = 1;
    hw_dma_send_addr((void *)fifo_sync, (int*)fifo_sync_data, sizeof(int),(void *)mb1_dma1_BASEADDR);
	jpeg_dec_main();
	t2 = hw_tifu_systimer_get(); 
	
	diff = t2 - t1;
	
	mk_mon_debug_info(LO_64(diff));
    mk_mon_debug_info(0XFDDE);
	// Signal the monitor we are done.
	mk_mon_debug_tile_finished();
	return 0;
}
コード例 #7
0
ファイル: jpegtobmp.c プロジェクト: jingjinghaha/JPEGDecoder
int main (void)
{
	// Sync with the monitor.
	start_stack_check();
	paint_stack();
    benchmark_cmem_pattern();
	mk_mon_sync();
	mask_DDR(); 
	
	begin_use();
    JpegToBmp();
	end_use();

	count_stack();
    benchmark_malloc_max_usage();
    benchmark_malloc_num_mallocs();
    benchmark_malloc_num_malloc_free();
    benchmark_cmem_usage();
    readback_DDR(); // only need to be put in 1 core
    print_DDR_usage(); // only need to be put in 1 core
    
	mk_mon_debug_info(0x00444D41);//start of DMA_counters
   //print the dma_counters according to the following order here
     mk_mon_debug_info(to_core1);
     mk_mon_debug_info(to_core2);
     mk_mon_debug_info(to_core3);
     mk_mon_debug_info(to_core4);
     mk_mon_debug_info(to_DDR);
     mk_mon_debug_info(from_core1);
     mk_mon_debug_info(from_core2);
     mk_mon_debug_info(from_core3);
     mk_mon_debug_info(from_core4);
     mk_mon_debug_info(from_DDR);
   mk_mon_debug_info(0xFF444D41);//end of DMA_counters
	// Signal the monitor we are done.
	mk_mon_debug_tile_finished();
	return 0;
}