int main (void)
{
// Sync with the monitor.
mk_mon_sync();
// Enable stack checking.
start_stack_check();
begin_use();
end_use();
mk_mon_debug_info(0x00444D41);//start of DMA_counters
//print the dma_counters according to the following order here
mk_mon_debug_info(to_core1);
mk_mon_debug_info(to_core2);
mk_mon_debug_info(to_core3);
mk_mon_debug_info(to_core4);
mk_mon_debug_info(to_DDR);
mk_mon_debug_info(from_core1);
mk_mon_debug_info(from_core2);
mk_mon_debug_info(from_core3);
mk_mon_debug_info(from_core4);
mk_mon_debug_info(from_DDR);
mk_mon_debug_info(0xFF444D41);//end of DMA_counters
// Signal the monitor we are done.
mk_mon_debug_tile_finished();
return 0;
}
int main (void)
{
// Sync with the monitor.
mk_mon_sync();
// Enable stack checking.
start_stack_check();
/* 2. Benchmarking stuff (to measure usage of communication memory) */
{
bench_mark_fill_pattern_to_cmem();
}
/* End of Benchmarking stuff before starting decoding */
/* 2. Only benchmark related shared variables, (also includes variables for receiving start and sending stop signal) */
volatile unsigned int *mb3_end = (unsigned int*)(mb3_cmemout0_BASEADDR + mb3_cmemout0_SIZE - 2*sizeof(unsigned int));
volatile unsigned int *mb3_start = (unsigned int*)(mb3_cmemin0_BASEADDR + mb3_cmemin0_SIZE - sizeof(unsigned int));
int num_of_dma = 0;
/* End of sync variables */
/* 3. Wait for start signal from MB1 */
*mb3_start = 0;
while(*((volatile int*)mb3_start) != 1);
/* 4. All code pertaining to jpeg decoder below this line */
{
/* Call your application function here */
tile_main();
}
/* End of the jpeg decoder function -*"No code pertaining to decoder beyond this line apart from sending end of job flags to MB1 and benchmarking stuff "*- */
/* 5. Signal MB1 that work is finished in MB3 */
*mb3_end = 1;
DMA_SEND_BLOCKING((unsigned int*)(mb1_cmemin3_pt_REMOTEADDR + mb1_cmemin3_SIZE - 2*sizeof(unsigned int)), mb3_end, 1, (void *)(mb3_dma1_BASEADDR),DMA_flag); //core 3 finish flag
/* 11. Code to compute number of DMA channels used in MB1 */
switch(DMA_flag)
{
case(0X00) : num_of_dma = 0; break;
case(0X0F) : num_of_dma = 1; break;
case(0XF0) : num_of_dma = 1; break;
case(0XFF) : num_of_dma = 2; break;
default: num_of_dma = -1;
}
/* 6. Benchmarking display code starts here */
mk_mon_error(0XB2, num_of_dma); // Displays the total number of DMA send and receive calls performed in MB3
mk_mon_error(0XB3, bench_mark_measure_cmem_usage()); // Displays the size of communication memory used by MB3
mk_mon_error(0XB4, bench_dyna_mem_size); // Displays the size of dynamic memory used by MB3
mk_mon_debug_tile_finished();
return 0;
}
int main (void)
{
// Sync with the monitor.
mk_mon_sync();
// Enable stack checking.
start_stack_check();
begin_use();
JpegToBmp();
end_use();
// Signal the monitor we are done.
mk_mon_debug_tile_finished();
return 0;
}
int main (void)
{
// Sync with the monitor.
mk_mon_sync();
// Enable stack checking.
start_stack_check();
jpeg_dec_main();
// Signal the monitor we are done.
mk_mon_debug_tile_finished();
return 0;
}
int main (void)
{
// Sync with the monitor.
mk_mon_sync();
// Enable stack checking.
start_stack_check();
// /*
begin_use();
int output = JpegToBmp();
mk_mon_debug_info(output);
// Signal the monitor we are done.
end_use();
// */
mk_mon_debug_tile_finished();
return 0;
}
int main (void)
{
// Sync with the monitor.
mk_mon_sync();
TIME t1,t2,diff;
// Enable stack checking.
start_stack_check();
clear_frame_buffer();
t1 = hw_tifu_systimer_get();
/*Initalize the C-Heap communication*/
/* FBlock is used as token for communication between Core1 & Core2 */
unsigned int token_size = sizeof(FBlock);
/* FIFO can store 6 tokens. */
unsigned int fifo_size = 1;
/*Init FiFo*/
cheap_init_fifo(producer, consumer, token_size, fifo_size, (unsigned int)producer_data, (unsigned int) consumer_data,
mb1_dma1_BASEADDR, mb1_cmemout1_BASEADDR,
mb2_dma1_BASEADDR, mb2_cmemout1_BASEADDR);
/* signal to core 2 that the FIFO is initialized and can be read from. */
*fifo_sync_data = 1;
hw_dma_send_addr((void *)fifo_sync, (int*)fifo_sync_data, sizeof(int),(void *)mb1_dma1_BASEADDR);
jpeg_dec_main();
t2 = hw_tifu_systimer_get();
diff = t2 - t1;
mk_mon_debug_info(LO_64(diff));
mk_mon_debug_info(0XFDDE);
// Signal the monitor we are done.
mk_mon_debug_tile_finished();
return 0;
}
int main (void)
{
// Sync with the monitor.
start_stack_check();
paint_stack();
benchmark_cmem_pattern();
mk_mon_sync();
mask_DDR();
begin_use();
JpegToBmp();
end_use();
count_stack();
benchmark_malloc_max_usage();
benchmark_malloc_num_mallocs();
benchmark_malloc_num_malloc_free();
benchmark_cmem_usage();
readback_DDR(); // only need to be put in 1 core
print_DDR_usage(); // only need to be put in 1 core
mk_mon_debug_info(0x00444D41);//start of DMA_counters
//print the dma_counters according to the following order here
mk_mon_debug_info(to_core1);
mk_mon_debug_info(to_core2);
mk_mon_debug_info(to_core3);
mk_mon_debug_info(to_core4);
mk_mon_debug_info(to_DDR);
mk_mon_debug_info(from_core1);
mk_mon_debug_info(from_core2);
mk_mon_debug_info(from_core3);
mk_mon_debug_info(from_core4);
mk_mon_debug_info(from_DDR);
mk_mon_debug_info(0xFF444D41);//end of DMA_counters
// Signal the monitor we are done.
mk_mon_debug_tile_finished();
return 0;
}