static int
qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
if (qlcnic_82xx_check(adapter))
return qlcnic_82xx_get_settings(adapter, ecmd);
else if (qlcnic_83xx_check(adapter))
return qlcnic_83xx_get_settings(adapter, ecmd);
return -EIO;
}
static int
qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
struct qlcnic_hardware_context *ahw = adapter->ahw;
u32 speed, reg;
int check_sfp_module = 0;
u16 pcifn = ahw->pci_func;
/* read which mode */
if (adapter->ahw->port_type == QLCNIC_GBE) {
ecmd->supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
ecmd->advertising = (ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full);
ethtool_cmd_speed_set(ecmd, adapter->ahw->link_speed);
ecmd->duplex = adapter->ahw->link_duplex;
ecmd->autoneg = adapter->ahw->link_autoneg;
} else if (adapter->ahw->port_type == QLCNIC_XGBE) {
u32 val = 0;
if (qlcnic_83xx_check(adapter))
qlcnic_83xx_get_settings(adapter);
else
val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR);
if (val == QLCNIC_PORT_MODE_802_3_AP) {
ecmd->supported = SUPPORTED_1000baseT_Full;
ecmd->advertising = ADVERTISED_1000baseT_Full;
} else {
ecmd->supported = SUPPORTED_10000baseT_Full;
ecmd->advertising = ADVERTISED_10000baseT_Full;
}
if (netif_running(dev) && adapter->ahw->has_link_events) {
if (qlcnic_82xx_check(adapter)) {
reg = QLCRD32(adapter,
P3P_LINK_SPEED_REG(pcifn));
speed = P3P_LINK_SPEED_VAL(pcifn, reg);
ahw->link_speed = speed * P3P_LINK_SPEED_MHZ;
}
ethtool_cmd_speed_set(ecmd, adapter->ahw->link_speed);
ecmd->autoneg = adapter->ahw->link_autoneg;
ecmd->duplex = adapter->ahw->link_duplex;
goto skip;
}
ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
ecmd->duplex = DUPLEX_UNKNOWN;
ecmd->autoneg = AUTONEG_DISABLE;
} else
return -EIO;
skip:
ecmd->phy_address = adapter->ahw->physical_port;
ecmd->transceiver = XCVR_EXTERNAL;
switch (adapter->ahw->board_type) {
case QLCNIC_BRDTYPE_P3P_REF_QG:
case QLCNIC_BRDTYPE_P3P_4_GB:
case QLCNIC_BRDTYPE_P3P_4_GB_MM:
ecmd->supported |= SUPPORTED_Autoneg;
ecmd->advertising |= ADVERTISED_Autoneg;
case QLCNIC_BRDTYPE_P3P_10G_CX4:
case QLCNIC_BRDTYPE_P3P_10G_CX4_LP:
case QLCNIC_BRDTYPE_P3P_10000_BASE_T:
ecmd->supported |= SUPPORTED_TP;
ecmd->advertising |= ADVERTISED_TP;
ecmd->port = PORT_TP;
ecmd->autoneg = adapter->ahw->link_autoneg;
break;
case QLCNIC_BRDTYPE_P3P_IMEZ:
case QLCNIC_BRDTYPE_P3P_XG_LOM:
case QLCNIC_BRDTYPE_P3P_HMEZ:
ecmd->supported |= SUPPORTED_MII;
ecmd->advertising |= ADVERTISED_MII;
ecmd->port = PORT_MII;
ecmd->autoneg = AUTONEG_DISABLE;
break;
case QLCNIC_BRDTYPE_P3P_10G_SFP_PLUS:
case QLCNIC_BRDTYPE_P3P_10G_SFP_CT:
case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
ecmd->advertising |= ADVERTISED_TP;
ecmd->supported |= SUPPORTED_TP;
check_sfp_module = netif_running(dev) &&
adapter->ahw->has_link_events;
case QLCNIC_BRDTYPE_P3P_10G_XFP:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
ecmd->port = PORT_FIBRE;
ecmd->autoneg = AUTONEG_DISABLE;
break;
case QLCNIC_BRDTYPE_P3P_10G_TP:
if (adapter->ahw->port_type == QLCNIC_XGBE) {
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
ecmd->advertising |=
(ADVERTISED_FIBRE | ADVERTISED_TP);
ecmd->port = PORT_FIBRE;
check_sfp_module = netif_running(dev) &&
adapter->ahw->has_link_events;
} else {
ecmd->autoneg = AUTONEG_ENABLE;
ecmd->supported |= (SUPPORTED_TP | SUPPORTED_Autoneg);
ecmd->advertising |=
(ADVERTISED_TP | ADVERTISED_Autoneg);
ecmd->port = PORT_TP;
}
break;
case QLCNIC_BRDTYPE_83XX_10G:
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
ecmd->advertising |= (ADVERTISED_FIBRE | ADVERTISED_TP);
ecmd->port = PORT_FIBRE;
check_sfp_module = netif_running(dev) && ahw->has_link_events;
break;
default:
dev_err(&adapter->pdev->dev, "Unsupported board model %d\n",
adapter->ahw->board_type);
return -EIO;
}
if (check_sfp_module) {
switch (adapter->ahw->module_type) {
case LINKEVENT_MODULE_OPTICAL_UNKNOWN:
case LINKEVENT_MODULE_OPTICAL_SRLR:
case LINKEVENT_MODULE_OPTICAL_LRM:
case LINKEVENT_MODULE_OPTICAL_SFP_1G:
ecmd->port = PORT_FIBRE;
break;
case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE:
case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN:
case LINKEVENT_MODULE_TWINAX:
ecmd->port = PORT_TP;
break;
default:
ecmd->port = PORT_OTHER;
}
}
return 0;
}