C++ (Cpp) qlcnic_83xx_get_settings 예제들

예제 #1

파일: qlcnic_ethtool.c 프로젝트: AD5GB/kernel_n5_3.10-experimental

static int
qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
	struct qlcnic_adapter *adapter = netdev_priv(dev);

	if (qlcnic_82xx_check(adapter))
		return qlcnic_82xx_get_settings(adapter, ecmd);
	else if (qlcnic_83xx_check(adapter))
		return qlcnic_83xx_get_settings(adapter, ecmd);

	return -EIO;
}

예제 #2

파일: qlcnic_ethtool.c 프로젝트: realmz/blackfin-linux

static int
qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
	struct qlcnic_adapter *adapter = netdev_priv(dev);
	struct qlcnic_hardware_context *ahw = adapter->ahw;
	u32 speed, reg;
	int check_sfp_module = 0;
	u16 pcifn = ahw->pci_func;

	/* read which mode */
	if (adapter->ahw->port_type == QLCNIC_GBE) {
		ecmd->supported = (SUPPORTED_10baseT_Half |
				   SUPPORTED_10baseT_Full |
				   SUPPORTED_100baseT_Half |
				   SUPPORTED_100baseT_Full |
				   SUPPORTED_1000baseT_Half |
				   SUPPORTED_1000baseT_Full);

		ecmd->advertising = (ADVERTISED_100baseT_Half |
				     ADVERTISED_100baseT_Full |
				     ADVERTISED_1000baseT_Half |
				     ADVERTISED_1000baseT_Full);

		ethtool_cmd_speed_set(ecmd, adapter->ahw->link_speed);
		ecmd->duplex = adapter->ahw->link_duplex;
		ecmd->autoneg = adapter->ahw->link_autoneg;

	} else if (adapter->ahw->port_type == QLCNIC_XGBE) {
		u32 val = 0;
		if (qlcnic_83xx_check(adapter))
			qlcnic_83xx_get_settings(adapter);
		else
			val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR);

		if (val == QLCNIC_PORT_MODE_802_3_AP) {
			ecmd->supported = SUPPORTED_1000baseT_Full;
			ecmd->advertising = ADVERTISED_1000baseT_Full;
		} else {
			ecmd->supported = SUPPORTED_10000baseT_Full;
			ecmd->advertising = ADVERTISED_10000baseT_Full;
		}

		if (netif_running(dev) && adapter->ahw->has_link_events) {
			if (qlcnic_82xx_check(adapter)) {
				reg = QLCRD32(adapter,
					      P3P_LINK_SPEED_REG(pcifn));
				speed = P3P_LINK_SPEED_VAL(pcifn, reg);
				ahw->link_speed = speed * P3P_LINK_SPEED_MHZ;
			}
			ethtool_cmd_speed_set(ecmd, adapter->ahw->link_speed);
			ecmd->autoneg = adapter->ahw->link_autoneg;
			ecmd->duplex = adapter->ahw->link_duplex;
			goto skip;
		}

		ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
		ecmd->duplex = DUPLEX_UNKNOWN;
		ecmd->autoneg = AUTONEG_DISABLE;
	} else
		return -EIO;

skip:
	ecmd->phy_address = adapter->ahw->physical_port;
	ecmd->transceiver = XCVR_EXTERNAL;

	switch (adapter->ahw->board_type) {
	case QLCNIC_BRDTYPE_P3P_REF_QG:
	case QLCNIC_BRDTYPE_P3P_4_GB:
	case QLCNIC_BRDTYPE_P3P_4_GB_MM:

		ecmd->supported |= SUPPORTED_Autoneg;
		ecmd->advertising |= ADVERTISED_Autoneg;
	case QLCNIC_BRDTYPE_P3P_10G_CX4:
	case QLCNIC_BRDTYPE_P3P_10G_CX4_LP:
	case QLCNIC_BRDTYPE_P3P_10000_BASE_T:
		ecmd->supported |= SUPPORTED_TP;
		ecmd->advertising |= ADVERTISED_TP;
		ecmd->port = PORT_TP;
		ecmd->autoneg =  adapter->ahw->link_autoneg;
		break;
	case QLCNIC_BRDTYPE_P3P_IMEZ:
	case QLCNIC_BRDTYPE_P3P_XG_LOM:
	case QLCNIC_BRDTYPE_P3P_HMEZ:
		ecmd->supported |= SUPPORTED_MII;
		ecmd->advertising |= ADVERTISED_MII;
		ecmd->port = PORT_MII;
		ecmd->autoneg = AUTONEG_DISABLE;
		break;
	case QLCNIC_BRDTYPE_P3P_10G_SFP_PLUS:
	case QLCNIC_BRDTYPE_P3P_10G_SFP_CT:
	case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
		ecmd->advertising |= ADVERTISED_TP;
		ecmd->supported |= SUPPORTED_TP;
		check_sfp_module = netif_running(dev) &&
				   adapter->ahw->has_link_events;
	case QLCNIC_BRDTYPE_P3P_10G_XFP:
		ecmd->supported |= SUPPORTED_FIBRE;
		ecmd->advertising |= ADVERTISED_FIBRE;
		ecmd->port = PORT_FIBRE;
		ecmd->autoneg = AUTONEG_DISABLE;
		break;
	case QLCNIC_BRDTYPE_P3P_10G_TP:
		if (adapter->ahw->port_type == QLCNIC_XGBE) {
			ecmd->autoneg = AUTONEG_DISABLE;
			ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
			ecmd->advertising |=
				(ADVERTISED_FIBRE | ADVERTISED_TP);
			ecmd->port = PORT_FIBRE;
			check_sfp_module = netif_running(dev) &&
					   adapter->ahw->has_link_events;
		} else {
			ecmd->autoneg = AUTONEG_ENABLE;
			ecmd->supported |= (SUPPORTED_TP | SUPPORTED_Autoneg);
			ecmd->advertising |=
				(ADVERTISED_TP | ADVERTISED_Autoneg);
			ecmd->port = PORT_TP;
		}
		break;
	case QLCNIC_BRDTYPE_83XX_10G:
		ecmd->autoneg = AUTONEG_DISABLE;
		ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
		ecmd->advertising |= (ADVERTISED_FIBRE | ADVERTISED_TP);
		ecmd->port = PORT_FIBRE;
		check_sfp_module = netif_running(dev) && ahw->has_link_events;
		break;
	default:
		dev_err(&adapter->pdev->dev, "Unsupported board model %d\n",
			adapter->ahw->board_type);
		return -EIO;
	}

	if (check_sfp_module) {
		switch (adapter->ahw->module_type) {
		case LINKEVENT_MODULE_OPTICAL_UNKNOWN:
		case LINKEVENT_MODULE_OPTICAL_SRLR:
		case LINKEVENT_MODULE_OPTICAL_LRM:
		case LINKEVENT_MODULE_OPTICAL_SFP_1G:
			ecmd->port = PORT_FIBRE;
			break;
		case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE:
		case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN:
		case LINKEVENT_MODULE_TWINAX:
			ecmd->port = PORT_TP;
			break;
		default:
			ecmd->port = PORT_OTHER;
		}
	}

	return 0;
}