/**
* \brief Initialize USART in SPI master mode.
*
* This function initializes the USART module in SPI master mode using the
* usart_spi_options_t configuration structure and CPU frequency.
*
* \param usart The USART module.
* \param opt The RS232 configuration option.
*/
void usart_init_spi(USART_t *usart, const usart_spi_options_t *opt)
{
usart->UBRR = 0;
usart_enable_module_clock(usart);
usart_set_mode(usart, USART_CMODE_MSPI_gc);
if (opt->spimode == 1 || opt->spimode == 3) {
usart->UCSRnC |= USART_UCPHA_bm;
} else {
usart->UCSRnC &= ~USART_UCPHA_bm;
}
if (opt->spimode == 2 || opt->spimode == 3) {
usart->UCSRnC |= USART_UCPOL_bm;
} else {
usart->UCSRnC &= ~USART_UCPOL_bm;
}
if (opt->data_order) {
usart->UCSRnC |= USART_DORD_bm;
} else {
usart->UCSRnC &= ~USART_DORD_bm;
}
usart_spi_set_baudrate(usart, opt->baudrate,
sysclk_get_source_clock_hz());
usart_tx_enable(usart);
usart_rx_enable(usart);
}
/**
* \brief Initialize USART in RS232 mode.
*
* This function initializes the USART module in RS232 mode using the
* usart_rs232_options_t configuration structure and CPU frequency.
*
* \param usart The USART module.
* \param opt The RS232 configuration option.
*/
void usart_init_rs232(USART_t *usart, const usart_rs232_options_t *opt)
{
usart_enable_module_clock(usart);
usart_set_mode(usart, USART_CMODE_ASYNCHRONOUS_gc);
usart_format_set(usart, opt->charlength, opt->paritytype,
opt->stopbits);
usart_set_baudrate(usart, opt->baudrate, sysclk_get_per_hz());
usart_tx_enable(usart);
usart_rx_enable(usart);
}
/**
* \brief Initialize USART in SPI master mode.
*
* This function initializes the USART module in SPI master mode using the
* usart_spi_options_t configuration structure and CPU frequency.
*
* \param usart The USART module.
* \param opt The RS232 configuration option.
*/
void usart_init_spi(USART_t *usart, const usart_spi_options_t *opt)
{
usart->UBRR = 0;
usart_enable_module_clock(usart);
usart_set_mode(usart, USART_CMODE_MSPI_gc);
port_pin_t sck_pin;
#ifdef USARTA0
if ((uintptr_t)usart == (uintptr_t)&UCSR0A) {
sck_pin = IOPORT_CREATE_PIN(PORTE, 2);
ioport_configure_port_pin(ioport_pin_to_port(sck_pin),
ioport_pin_to_mask(sck_pin),
IOPORT_DIR_OUTPUT | IOPORT_INIT_HIGH );
}
#endif
#ifdef USARTA1
if ((uintptr_t)usart == (uintptr_t)&UCSR1A) {
sck_pin = IOPORT_CREATE_PIN(PORTD, 5);
ioport_configure_port_pin(ioport_pin_to_port(sck_pin),
ioport_pin_to_mask(sck_pin),
IOPORT_DIR_OUTPUT | IOPORT_INIT_HIGH );
}
#endif
if (opt->spimode == 1 || opt->spimode == 3) {
usart->UCSRnC |= USART_UCPHA_bm;
} else {
usart->UCSRnC &= ~USART_UCPHA_bm;
}
if (opt->spimode == 2 || opt->spimode == 3) {
usart->UCSRnC |= USART_UCPOL_bm;
} else {
usart->UCSRnC &= ~USART_UCPOL_bm;
}
if (opt->data_order) {
usart->UCSRnC |= USART_DORD_bm;
} else {
usart->UCSRnC &= ~USART_DORD_bm;
}
usart_spi_set_baudrate(usart, opt->baudrate,
sysclk_get_source_clock_hz());
usart_tx_enable(usart);
usart_rx_enable(usart);
}
/**
* \brief Initialize USART in SPI master mode.
*
* This function initializes the USART module in SPI master mode using the
* usart_spi_options_t configuration structure and CPU frequency.
*
* \param usart The USART module.
* \param opt The RS232 configuration option.
*/
void usart_init_spi(USART_t *usart, const usart_spi_options_t *opt)
{
usart_enable_module_clock(usart);
usart_set_mode(usart, USART_CMODE_MSPI_gc);
port_pin_t sck_pin;
if (opt->spimode == 1 || opt->spimode == 3) {
//! \todo Fix when UCPHA_bm is added to header file.
usart->CTRLC |= 0x02;
} else {
//! \todo Fix when UCPHA_bm is added to header file.
usart->CTRLC &= ~0x02;
}
// configure Clock polarity using INVEN bit of the correct SCK I/O port
if (opt->spimode == 2 || opt->spimode == 3) {
#ifdef USARTC0
if ((uint16_t)usart == (uint16_t)&USARTC0) {
sck_pin = IOPORT_CREATE_PIN(PORTC, 1);
ioport_configure_port_pin(ioport_pin_to_port(sck_pin),
ioport_pin_to_mask(sck_pin),
IOPORT_DIR_OUTPUT | IOPORT_INIT_HIGH | IOPORT_INV_ENABLED);
}
#endif
#ifdef USARTC1
if ((uint16_t)usart == (uint16_t)&USARTC1) {
sck_pin = IOPORT_CREATE_PIN(PORTC, 5);
ioport_configure_port_pin(ioport_pin_to_port(sck_pin),
ioport_pin_to_mask(sck_pin),
IOPORT_DIR_OUTPUT | IOPORT_INIT_HIGH | IOPORT_INV_ENABLED);
}
#endif
#ifdef USARTD0
if ((uint16_t)usart == (uint16_t)&USARTD0) {
sck_pin = IOPORT_CREATE_PIN(PORTD, 1);
ioport_configure_port_pin(ioport_pin_to_port(sck_pin),
ioport_pin_to_mask(sck_pin),
IOPORT_DIR_OUTPUT | IOPORT_INIT_HIGH | IOPORT_INV_ENABLED);
}
#endif
#ifdef USARTD1
if ((uint16_t)usart == (uint16_t)&USARTD1) {
sck_pin = IOPORT_CREATE_PIN(PORTD, 5);
ioport_configure_port_pin(ioport_pin_to_port(sck_pin),
ioport_pin_to_mask(sck_pin),
IOPORT_DIR_OUTPUT | IOPORT_INIT_HIGH | IOPORT_INV_ENABLED);
}
#endif
#ifdef USARTE0
if ((uint16_t)usart == (uint16_t)&USARTE0) {
sck_pin = IOPORT_CREATE_PIN(PORTE, 1);
ioport_configure_port_pin(ioport_pin_to_port(sck_pin),
ioport_pin_to_mask(sck_pin),
IOPORT_DIR_OUTPUT | IOPORT_INIT_HIGH | IOPORT_INV_ENABLED);
}
#endif
#ifdef USARTE1
if ((uint16_t)usart == (uint16_t)&USARTE1) {
sck_pin = IOPORT_CREATE_PIN(PORTE, 5);
ioport_configure_port_pin(ioport_pin_to_port(sck_pin),
ioport_pin_to_mask(sck_pin),
IOPORT_DIR_OUTPUT | IOPORT_INIT_HIGH | IOPORT_INV_ENABLED);
}
#endif
#ifdef USARTF0
if ((uint16_t)usart == (uint16_t)&USARTF0) {
sck_pin = IOPORT_CREATE_PIN(PORTF, 1);
ioport_configure_port_pin(ioport_pin_to_port(sck_pin),
ioport_pin_to_mask(sck_pin),
IOPORT_DIR_OUTPUT | IOPORT_INIT_HIGH | IOPORT_INV_ENABLED);
}
#endif
#ifdef USARTF1
if ((uint16_t)usart == (uint16_t)&USARTF1) {
sck_pin = IOPORT_CREATE_PIN(PORTF, 5);
ioport_configure_port_pin(ioport_pin_to_port(sck_pin),
ioport_pin_to_mask(sck_pin),
IOPORT_DIR_OUTPUT | IOPORT_INIT_HIGH | IOPORT_INV_ENABLED);
}
#endif
}
usart_spi_set_baudrate(usart, opt->baudrate, sysclk_get_per_hz());
usart_tx_enable(usart);
usart_rx_enable(usart);
}
