コード例 #1
0
double TransportGradientPeriodic :: giveUnknown(ValueModeType mode, TimeStep *tStep, ActiveDof *dof)
{
    if ( this->isGradDof(dof) ) {
        int ind = grad_ids.findFirstIndexOf(dof->giveDofID()) - 1;
        return this->mGradient(ind) * this->giveTimeFunction()->evaluateAtTime(tStep->giveTargetTime());
    }

    DofManager *master = this->domain->giveDofManager(this->slavemap[dof->giveDofManager()->giveNumber()]);

    if ( mode == VM_Incremental ) {
        double val = master->giveDofWithID(dof->giveDofID())->giveUnknown(mode, tStep);
        return this->giveUnknown(val, mode, tStep, dof);
    }
    double val = master->giveDofWithID(dof->giveDofID())->giveUnknown(mode, tStep);
    return this->giveUnknown(val, mode, tStep, dof);
}
コード例 #2
0
bool
NodeErrorCheckingRule :: check(Domain *domain, TimeStep *tStep)
{
    // Rule doesn't apply yet.
    if ( tStep->giveNumber() != tstep ) {
        return true;
    }

    DofManager *dman = domain->giveGlobalDofManager(number);
    if ( !dman ) {
        if ( domain->giveEngngModel()->isParallel() ) {
            return true;
        } else {
            OOFEM_WARNING("Dof manager %d not found.", number);
            return false;
        }
    }

    if ( dman->giveParallelMode() == DofManager_remote || dman->giveParallelMode() == DofManager_null ) {
        return true;
    }

    Dof *dof = dman->giveDofWithID(dofid);

    double dmanValue = dof->giveUnknown(mode, tStep);
    bool check = checkValue(dmanValue);
    if ( !check ) {
        OOFEM_WARNING("Check failed in: tstep %d, node %d, dof %d, mode %d:\n"
                      "value is %.8e, but should be %.8e ( error is %e but tolerance is %e )",
                      tstep, number, dofid, mode,
                      dmanValue, value, fabs(dmanValue-value), tolerance );
    }
    return check;
}
コード例 #3
0
void
SolutionbasedShapeFunction :: copyDofManagersToSurfaceData(modeStruct *mode, IntArray nodeList, bool isPlus, bool isMinus, bool isZeroBoundary)
{
    for ( int i = 1; i <= nodeList.giveSize(); i++ ) {
        FloatArray values;
        DofManager *dman = mode->myEngngModel->giveDomain(1)->giveDofManager( nodeList.at(i) );

        computeBaseFunctionValueAt(values, * dman->giveCoordinates(), this->dofs, * mode->myEngngModel);

        for ( int j = 1; j <= this->dofs.giveSize(); j++ ) {
            SurfaceDataStruct *surfaceData = new(SurfaceDataStruct);
            Dof *d = dman->giveDofWithID( dofs.at(j) );

            surfaceData->DofID = ( DofIDItem ) this->dofs.at(j);
            surfaceData->DofMan = dman;
            surfaceData->isPlus = isPlus;
            surfaceData->isMinus = isMinus;
            surfaceData->isZeroBoundary = isZeroBoundary;
            surfaceData->isFree = d->giveBcId() == 0;
            surfaceData->value = values.at(j);

            mode->SurfaceData.push_back(surfaceData);
        }
    }
}
コード例 #4
0
void
SolutionbasedShapeFunction :: updateModelWithFactors(modeStruct *m)
{
    //Update values with correction factors
    for ( size_t j = 0; j < m->SurfaceData.size(); j++ ) {
        SurfaceDataStruct *sd = m->SurfaceData.at(j);
        DofManager *dman = sd->DofMan;
        Dof *d = dman->giveDofWithID(sd->DofID);

        double factor = 1.0;
        factor = m->SurfaceData.at(j)->isPlus ? m->ap : factor;
        factor = m->SurfaceData.at(j)->isMinus ? m->am : factor;
        factor = m->SurfaceData.at(j)->isZeroBoundary ? 1.0 : factor;

        if ( dynamic_cast< MasterDof * >(d) && m->SurfaceData.at(j)->isFree ) {
            double u = m->SurfaceData.at(j)->value;
            this->setBoundaryConditionOnDof(dman->giveDofWithID(m->SurfaceData.at(j)->DofID), u * factor);
        }
    }
}
コード例 #5
0
double PrescribedGradientBCPeriodic :: giveUnknown(PrimaryField &field, ValueModeType mode, TimeStep *tStep, ActiveDof *dof)
{
    if ( this->isStrainDof(dof) ) {
        int ind = strain_id.findFirstIndexOf(dof->giveDofID()) - 1;
        return this->mGradient(ind % 3, ind / 3) * this->giveTimeFunction()->evaluateAtTime(tStep->giveTargetTime());
    }

    DofManager *master = this->domain->giveDofManager(this->slavemap[dof->giveDofManager()->giveNumber()]);
    double val = master->giveDofWithID(dof->giveDofID())->giveUnknown(field, mode, tStep);
    return this->giveUnknown(val, mode, tStep, dof);
}
コード例 #6
0
ファイル: phasefieldelement.C プロジェクト: aishugang/oofem
void
PhaseFieldElement :: computeLocationArrayOfDofIDs( const IntArray &dofIdArray, IntArray &answer )
{
    // Routine to extract compute the location array an element given an dofid array.
    answer.clear();
    NLStructuralElement *el = this->giveElement();
    int k = 0;
    for ( int i = 1; i <= el->giveNumberOfDofManagers(); i++ ) {
        DofManager *dMan = el->giveDofManager( i );
        for ( int j = 1; j <= dofIdArray.giveSize( ); j++ ) {

            if ( dMan->hasDofID( (DofIDItem) dofIdArray.at( j ) ) ) {
                Dof *d = dMan->giveDofWithID( dofIdArray.at( j ) );
                answer.followedBy( k + d->giveNumber( ) );
            }
        }
        k += dMan->giveNumberOfDofs( );
    }
}
コード例 #7
0
void
CoupledFieldsElement :: computeLocationArrayOfDofIDs(const IntArray &dofIdArray, IntArray &answer)
{
    // Routine to extract compute the location array an element given an dofid array.
    answer.resize(0);
    
    int k = 0;
    for ( int i = 1; i <= numberOfDofMans; i++ ) {
        DofManager *dMan = this->giveDofManager(i);        
        for (int j = 1; j <= dofIdArray.giveSize(); j++ ) {   
            
            if ( dMan->hasDofID( (DofIDItem) dofIdArray.at(j) ) ) {
                Dof *d = dMan->giveDofWithID( dofIdArray.at(j) );
                answer.followedBy( k + d->giveNumber() );
                //answer.followedBy( k + j );
            }
        }
        k += dMan->giveNumberOfDofs( );
    }
}
コード例 #8
0
void
CoupledFieldsElement :: computeVectorOfDofIDs(const IntArray &dofIdArray, ValueModeType valueMode, TimeStep *stepN, FloatArray &answer)
{
    // Routine to extract the solution vector for an element given an dofid array.
    // Size will be numberOfDofs and if a certain dofId does not exist a zero is used as value. 
    
    answer.resize( numberOfDofMans * dofIdArray.giveSize() ); // equal number of nodes for all fields
    answer.zero();
    int k = 1;
    for ( int i = 1; i <= numberOfDofMans; i++ ) {
        DofManager *dMan = this->giveDofManager(i);        
        for (int j = 1; j <= dofIdArray.giveSize(); j++ ) {   
            
            if ( dMan->hasDofID( (DofIDItem) dofIdArray.at(j) ) ) {
                Dof *d = dMan->giveDofWithID( dofIdArray.at(j) );
                answer.at(k) = d->giveUnknown(valueMode, stepN);
            }
            k++;
        }
    }
}
コード例 #9
0
void IncrementalLinearStatic :: solveYourselfAt(TimeStep *tStep)
{
    Domain *d = this->giveDomain(1);
    // Creates system of governing eq's and solves them at given time step


    // >>> beginning PH
    // The following piece of code updates assignment of boundary conditions to dofs
    // (this allows to have multiple boundary conditions assigned to one dof
    // which can be arbitrarily turned on and off in time)
    // Almost the entire section has been copied from domain.C
    std :: vector< std :: map< int, int > > dof_bc( d->giveNumberOfDofManagers() );

    for ( int i = 1; i <= d->giveNumberOfBoundaryConditions(); ++i ) {
        GeneralBoundaryCondition *gbc = d->giveBc(i);

        if ( gbc->isImposed(tStep) ) {

            if ( gbc->giveSetNumber() > 0 ) { ///@todo This will eventually not be optional.
                // Loop over nodes in set and store the bc number in each dof.
                Set *set = d->giveSet( gbc->giveSetNumber() );
                ActiveBoundaryCondition *active_bc = dynamic_cast< ActiveBoundaryCondition * >(gbc);
                BoundaryCondition *bc = dynamic_cast< BoundaryCondition * >(gbc);
                if ( bc || ( active_bc && active_bc->requiresActiveDofs() ) ) {
                    const IntArray &appliedDofs = gbc->giveDofIDs();
                    const IntArray &nodes = set->giveNodeList();
                    for ( int inode = 1; inode <= nodes.giveSize(); ++inode ) {
                        for ( int idof = 1; idof <= appliedDofs.giveSize(); ++idof ) {

                            if  ( dof_bc [ nodes.at(inode) - 1 ].find( appliedDofs.at(idof) ) == dof_bc [ nodes.at(inode) - 1 ].end() ) {
                                // is empty
                                dof_bc [ nodes.at(inode) - 1 ] [ appliedDofs.at(idof) ] = i;

                                DofManager * dofman = d->giveDofManager( nodes.at(inode) );
                                Dof * dof = dofman->giveDofWithID( appliedDofs.at(idof) );

                                dof->setBcId(i);

                            } else {
                                // another bc has been already prescribed at this time step to this dof
                                OOFEM_WARNING("More than one boundary condition assigned at time %f to node %d dof %d. Considering boundary condition %d", tStep->giveTargetTime(),  nodes.at(inode), appliedDofs.at(idof), dof_bc [ nodes.at(inode) - 1 ] [appliedDofs.at(idof)] );


                            }
                        }
                    }
                }
            }
        }
    }

    // to get proper number of equations
    this->forceEquationNumbering();
    // <<< end PH



    // Initiates the total displacement to zero.
    if ( tStep->isTheFirstStep() ) {
        for ( auto &dofman : d->giveDofManagers() ) {
            for ( Dof *dof: *dofman ) {
                dof->updateUnknownsDictionary(tStep->givePreviousStep(), VM_Total, 0.);
                dof->updateUnknownsDictionary(tStep, VM_Total, 0.);
            }
        }

        for ( auto &bc : d->giveBcs() ) {
            ActiveBoundaryCondition *abc;

            if ( ( abc = dynamic_cast< ActiveBoundaryCondition * >(bc.get()) ) ) {
                int ndman = abc->giveNumberOfInternalDofManagers();
                for ( int i = 1; i <= ndman; i++ ) {
                    DofManager *dofman = abc->giveInternalDofManager(i);
                    for ( Dof *dof: *dofman ) {
                        dof->updateUnknownsDictionary(tStep->givePreviousStep(), VM_Total, 0.);
                        dof->updateUnknownsDictionary(tStep, VM_Total, 0.);
                    }
                }
            }
        }
    }

    // Apply dirichlet b.c's on total values
    for ( auto &dofman : d->giveDofManagers() ) {
        for ( Dof *dof: *dofman ) {
            double tot = dof->giveUnknown( VM_Total, tStep->givePreviousStep() );
            if ( dof->hasBc(tStep) ) {
                tot += dof->giveBcValue(VM_Incremental, tStep);
            }

            dof->updateUnknownsDictionary(tStep, VM_Total, tot);
        }
    }

    int neq = this->giveNumberOfDomainEquations( 1, EModelDefaultEquationNumbering() );

#ifdef VERBOSE
    OOFEM_LOG_RELEVANT("Solving [step number %8d, time %15e, equations %d]\n", tStep->giveNumber(), tStep->giveTargetTime(), neq);
#endif

    if ( neq == 0 ) { // Allows for fully prescribed/empty problems.
        return;
    }

    incrementOfDisplacementVector.resize(neq);
    incrementOfDisplacementVector.zero();

#ifdef VERBOSE
    OOFEM_LOG_INFO("Assembling load\n");
#endif
    // Assembling the element part of load vector
    internalLoadVector.resize(neq);
    internalLoadVector.zero();
    this->assembleVector( internalLoadVector, tStep, InternalForceAssembler(),
                          VM_Total, EModelDefaultEquationNumbering(), this->giveDomain(1) );

    loadVector.resize(neq);
    loadVector.zero();
    this->assembleVector( loadVector, tStep, ExternalForceAssembler(),
                          VM_Total, EModelDefaultEquationNumbering(), this->giveDomain(1) );

    loadVector.subtract(internalLoadVector);
    this->updateSharedDofManagers(loadVector, EModelDefaultEquationNumbering(), ReactionExchangeTag);


#ifdef VERBOSE
    OOFEM_LOG_INFO("Assembling stiffness matrix\n");
#endif
    stiffnessMatrix.reset( classFactory.createSparseMtrx(sparseMtrxType) );
    if ( !stiffnessMatrix ) {
        OOFEM_ERROR("sparse matrix creation failed");
    }

    stiffnessMatrix->buildInternalStructure( this, 1, EModelDefaultEquationNumbering() );
    stiffnessMatrix->zero();
    this->assemble( *stiffnessMatrix, tStep, TangentAssembler(TangentStiffness),
                    EModelDefaultEquationNumbering(), this->giveDomain(1) );

#ifdef VERBOSE
    OOFEM_LOG_INFO("Solving ...\n");
#endif
    this->giveNumericalMethod( this->giveCurrentMetaStep() );
    NM_Status s = nMethod->solve(*stiffnessMatrix, loadVector, incrementOfDisplacementVector);
    if ( !( s & NM_Success ) ) {
        OOFEM_ERROR("No success in solving system.");
    }
}
コード例 #10
0
void GnuplotExportModule::outputBoundaryCondition(PrescribedGradientBCWeak &iBC, TimeStep *tStep)
{
    FloatArray stress;
    iBC.computeField(stress, tStep);

    printf("Mean stress computed in Gnuplot export module: "); stress.printYourself();

    double time = 0.0;

    TimeStep *ts = emodel->giveCurrentStep();
    if ( ts != NULL ) {
        time = ts->giveTargetTime();
    }

    int bcIndex = iBC.giveNumber();

    std :: stringstream strMeanStress;
    strMeanStress << "PrescribedGradientGnuplotMeanStress" << bcIndex << "Time" << time << ".dat";
    std :: string nameMeanStress = strMeanStress.str();
    std::vector<double> componentArray, stressArray;

    for(int i = 1; i <= stress.giveSize(); i++) {
        componentArray.push_back(i);
        stressArray.push_back(stress.at(i));
    }

    XFEMDebugTools::WriteArrayToGnuplot(nameMeanStress, componentArray, stressArray);


    // Homogenized strain
    FloatArray grad;
    iBC.giveGradientVoigt(grad);
    outputGradient(iBC.giveNumber(), *iBC.giveDomain(), grad, tStep);

#if 0
    FloatArray grad;
    iBC.giveGradientVoigt(grad);
    double timeFactor = iBC.giveTimeFunction()->evaluate(ts, VM_Total);
    printf("timeFactor: %e\n", timeFactor );
    grad.times(timeFactor);
    printf("Mean grad computed in Gnuplot export module: "); grad.printYourself();

    std :: stringstream strMeanGrad;
    strMeanGrad << "PrescribedGradientGnuplotMeanGrad" << bcIndex << "Time" << time << ".dat";
    std :: string nameMeanGrad = strMeanGrad.str();
    std::vector<double> componentArrayGrad, gradArray;

    for(int i = 1; i <= grad.giveSize(); i++) {
        componentArrayGrad.push_back(i);
        gradArray.push_back(grad.at(i));
    }

    XFEMDebugTools::WriteArrayToGnuplot(nameMeanGrad, componentArrayGrad, gradArray);
#endif

    if(mExportBoundaryConditionsExtra) {

        // Traction node coordinates
        std::vector< std::vector<FloatArray> > nodePointArray;
        size_t numTracEl = iBC.giveNumberOfTractionElements();
        for(size_t i = 0; i < numTracEl; i++) {

            std::vector<FloatArray> points;
            FloatArray xS, xE;
            iBC.giveTractionElCoord(i, xS, xE);
            points.push_back(xS);
            points.push_back(xE);

            nodePointArray.push_back(points);
        }

        std :: stringstream strTractionNodes;
        strTractionNodes << "TractionNodesGnuplotTime" << time << ".dat";
        std :: string nameTractionNodes = strTractionNodes.str();

        WritePointsToGnuplot(nameTractionNodes, nodePointArray);



        // Traction element normal direction
        std::vector< std::vector<FloatArray> > nodeNormalArray;
        for(size_t i = 0; i < numTracEl; i++) {

            std::vector<FloatArray> points;
            FloatArray n,t;
            iBC.giveTractionElNormal(i, n,t);
            points.push_back(n);
            points.push_back(n);

            nodeNormalArray.push_back(points);
        }

        std :: stringstream strTractionNodeNormals;
        strTractionNodeNormals << "TractionNodeNormalsGnuplotTime" << time << ".dat";
        std :: string nameTractionNodeNormals = strTractionNodeNormals.str();

        WritePointsToGnuplot(nameTractionNodeNormals, nodeNormalArray);



        // Traction (x,y)
        std::vector< std::vector<FloatArray> > nodeTractionArray;
        for(size_t i = 0; i < numTracEl; i++) {

            std::vector<FloatArray> tractions;
            FloatArray tS, tE;

            iBC.giveTraction(i, tS, tE, VM_Total, tStep);

            tractions.push_back(tS);
            tractions.push_back(tE);
            nodeTractionArray.push_back(tractions);
        }

        std :: stringstream strTractions;
        strTractions << "TractionsGnuplotTime" << time << ".dat";
        std :: string nameTractions = strTractions.str();

        WritePointsToGnuplot(nameTractions, nodeTractionArray);



        // Arc position along the boundary
        std::vector< std::vector<FloatArray> > arcPosArray;
        for(size_t i = 0; i < numTracEl; i++) {
            std::vector<FloatArray> arcPos;
            double xiS = 0.0, xiE = 0.0;
            iBC.giveTractionElArcPos(i, xiS, xiE);
            arcPos.push_back( FloatArray{xiS} );
            arcPos.push_back( FloatArray{xiE} );

            arcPosArray.push_back(arcPos);
        }

        std :: stringstream strArcPos;
        strArcPos << "ArcPosGnuplotTime" << time << ".dat";
        std :: string nameArcPos = strArcPos.str();

        WritePointsToGnuplot(nameArcPos, arcPosArray);


        // Traction (normal, tangent)
        std::vector< std::vector<FloatArray> > nodeTractionNTArray;
        for(size_t i = 0; i < numTracEl; i++) {

            std::vector<FloatArray> tractions;
            FloatArray tS, tE;

            iBC.giveTraction(i, tS, tE, VM_Total, tStep);
            FloatArray n,t;
            iBC.giveTractionElNormal(i, n, t);


            double tSn = tS.dotProduct(n,2);
            double tSt = tS.dotProduct(t,2);
            tractions.push_back( {tSn ,tSt} );

            double tEn = tE.dotProduct(n,2);
            double tEt = tE.dotProduct(t,2);
            tractions.push_back( {tEn, tEt} );
            nodeTractionNTArray.push_back(tractions);
        }

        std :: stringstream strTractionsNT;
        strTractionsNT << "TractionsNormalTangentGnuplotTime" << time << ".dat";
        std :: string nameTractionsNT = strTractionsNT.str();

        WritePointsToGnuplot(nameTractionsNT, nodeTractionNTArray);



        // Boundary points and displacements
        IntArray boundaries, bNodes;
        iBC.giveBoundaries(boundaries);

        std::vector< std::vector<FloatArray> > bndNodes;

        for ( int pos = 1; pos <= boundaries.giveSize() / 2; ++pos ) {

            Element *e = iBC.giveDomain()->giveElement( boundaries.at(pos * 2 - 1) );
            int boundary = boundaries.at(pos * 2);

            e->giveInterpolation()->boundaryGiveNodes(bNodes, boundary);

            std::vector<FloatArray> bndSegNodes;

            // Add the start and end nodes of the segment
            DofManager *startNode   = e->giveDofManager( bNodes[0] );
            FloatArray xS    = *(startNode->giveCoordinates());

            Dof *dSu = startNode->giveDofWithID(D_u);
            double dU = dSu->giveUnknown(VM_Total, tStep);
            xS.push_back(dU);

            Dof *dSv = startNode->giveDofWithID(D_v);
            double dV = dSv->giveUnknown(VM_Total, tStep);
            xS.push_back(dV);

            bndSegNodes.push_back(xS);

            DofManager *endNode     = e->giveDofManager( bNodes[1] );
            FloatArray xE    = *(endNode->giveCoordinates());

            Dof *dEu = endNode->giveDofWithID(D_u);
            dU = dEu->giveUnknown(VM_Total, tStep);
            xE.push_back(dU);

            Dof *dEv = endNode->giveDofWithID(D_v);
            dV = dEv->giveUnknown(VM_Total, tStep);
            xE.push_back(dV);

            bndSegNodes.push_back(xE);

            bndNodes.push_back(bndSegNodes);
        }

        std :: stringstream strBndNodes;
        strBndNodes << "BndNodesGnuplotTime" << time << ".dat";
        std :: string nameBndNodes = strBndNodes.str();

        WritePointsToGnuplot(nameBndNodes, bndNodes);

    }
}
コード例 #11
0
/////////////////////////////////////////////////
// Help functions
void GnuplotExportModule::outputReactionForces(TimeStep *tStep)
{
    // Add sum of reaction forces to arrays
    // Compute sum of reaction forces for each BC number
    Domain *domain = emodel->giveDomain(1);
    StructuralEngngModel *seMod = dynamic_cast<StructuralEngngModel* >(emodel);
    if(seMod == NULL) {
        OOFEM_ERROR("failed to cast to StructuralEngngModel.");
    }

    IntArray ielemDofMask;
    FloatArray reactions;
    IntArray dofManMap, dofidMap, eqnMap;

    // test if solution step output is active
    if ( !testTimeStepOutput(tStep) ) {
        return;
    }

    // map contains corresponding dofmanager and dofs numbers corresponding to prescribed equations
    // sorted according to dofmanger number and as a minor crit. according to dof number
    // this is necessary for extractor, since the sorted output is expected
    seMod->buildReactionTable(dofManMap, dofidMap, eqnMap, tStep, 1);

    // compute reaction forces
    seMod->computeReaction(reactions, tStep, 1);

    // Find highest index of prescribed dofs
    int maxIndPresDof = 0;
    for ( int i = 1; i <= dofManMap.giveSize(); i++ ) {
        maxIndPresDof = std::max(maxIndPresDof, dofidMap.at(i));
    }

    int numBC = domain->giveNumberOfBoundaryConditions();

    while ( mReactionForceHistory.size() < size_t(numBC) ) {
        std::vector<FloatArray> emptyArray;
        mReactionForceHistory.push_back( emptyArray );
    }

    maxIndPresDof = domain->giveNumberOfSpatialDimensions();

    while ( mDispHist.size() < size_t(numBC) ) {
        std::vector<double> emptyArray;
        mDispHist.push_back( emptyArray );
    }

    for(int bcInd = 0; bcInd < numBC; bcInd++) {
        FloatArray fR(maxIndPresDof), disp(numBC);
        fR.zero();


        for ( int i = 1; i <= dofManMap.giveSize(); i++ ) {
            DofManager *dMan = domain->giveDofManager( dofManMap.at(i) );
            Dof *dof = dMan->giveDofWithID( dofidMap.at(i) );

            if ( dof->giveBcId() == bcInd+1 ) {
                fR.at( dofidMap.at(i) ) += reactions.at( eqnMap.at(i) );

                // Slightly dirty
                BoundaryCondition *bc = dynamic_cast<BoundaryCondition*> (domain->giveBc(bcInd+1));
                if ( bc != NULL ) {
                    disp.at(bcInd+1) = bc->give(dof, VM_Total, tStep->giveTargetTime());
                }
                ///@todo This function should be using the primaryfield instead of asking BCs directly. / Mikael
            }
        }

        mDispHist[bcInd].push_back(disp.at(bcInd+1));
        mReactionForceHistory[bcInd].push_back(fR);



        // X
        FILE * pFileX;
        char fileNameX[100];
        sprintf(fileNameX, "ReactionForceGnuplotBC%dX.dat", bcInd+1);
        pFileX = fopen ( fileNameX , "wb" );

        fprintf(pFileX, "#u Fx\n");
        for ( size_t j = 0; j < mDispHist[bcInd].size(); j++ ) {
            fprintf(pFileX, "%e %e\n", mDispHist[bcInd][j], mReactionForceHistory[bcInd][j].at(1) );
        }

        fclose(pFileX);

        // Y
        FILE * pFileY;
        char fileNameY[100];
        sprintf(fileNameY, "ReactionForceGnuplotBC%dY.dat", bcInd+1);
        pFileY = fopen ( fileNameY , "wb" );

        fprintf(pFileY, "#u Fx\n");
        for ( size_t j = 0; j < mDispHist[bcInd].size(); j++ ) {
            if( mReactionForceHistory[bcInd][j].giveSize() >= 2 ) {
                fprintf(pFileY, "%e %e\n", mDispHist[bcInd][j], mReactionForceHistory[bcInd][j].at(2) );
            }
        }

        fclose(pFileY);

    }
}