void LayoutMultiColumnFlowThread::layoutColumns(SubtreeLayoutScope& layoutScope)
{
// Since we ended up here, it means that the multicol container (our parent) needed
// layout. Since contents of the multicol container are diverted to the flow thread, the flow
// thread needs layout as well.
layoutScope.setChildNeedsLayout(this);
m_blockOffsetInEnclosingFragmentationContext = enclosingFragmentationContext() ? multiColumnBlockFlow()->offsetFromLogicalTopOfFirstPage() : LayoutUnit();
for (LayoutBox* columnBox = firstMultiColumnBox(); columnBox; columnBox = columnBox->nextSiblingMultiColumnBox()) {
if (!columnBox->isLayoutMultiColumnSet()) {
ASSERT(columnBox->isLayoutMultiColumnSpannerPlaceholder()); // no other type is expected.
continue;
}
LayoutMultiColumnSet* columnSet = toLayoutMultiColumnSet(columnBox);
layoutScope.setChildNeedsLayout(columnSet);
if (!m_columnHeightsChanged) {
// This is the initial layout pass. We need to reset the column height, because contents
// typically have changed.
columnSet->resetColumnHeight();
}
// Since column sets are regular block flow objects, and their position is changed in
// regular block layout code (with no means for the multicol code to notice unless we add
// hooks there), store the previous position now. If it changes in the imminent layout
// pass, we may have to rebalance its columns.
columnSet->storeOldPosition();
}
m_columnHeightsChanged = false;
invalidateColumnSets();
layout();
validateColumnSets();
}
LayoutMultiColumnSet* LayoutMultiColumnFlowThread::mapDescendantToColumnSet(LayoutObject* layoutObject) const
{
ASSERT(!containingColumnSpannerPlaceholder(layoutObject)); // should not be used for spanners or content inside them.
ASSERT(layoutObject != this);
ASSERT(layoutObject->isDescendantOf(this));
ASSERT(layoutObject->containingBlock()->isDescendantOf(this)); // Out-of-flow objects don't belong in column sets.
ASSERT(layoutObject->flowThreadContainingBlock() == this);
ASSERT(!layoutObject->isLayoutMultiColumnSet());
ASSERT(!layoutObject->isLayoutMultiColumnSpannerPlaceholder());
LayoutMultiColumnSet* multicolSet = firstMultiColumnSet();
if (!multicolSet)
return nullptr;
if (!multicolSet->nextSiblingMultiColumnSet())
return multicolSet;
// This is potentially SLOW! But luckily very uncommon. You would have to dynamically insert a
// spanner into the middle of column contents to need this.
for (; multicolSet; multicolSet = multicolSet->nextSiblingMultiColumnSet()) {
LayoutObject* firstLayoutObject = firstLayoutObjectInSet(multicolSet);
LayoutObject* lastLayoutObject = lastLayoutObjectInSet(multicolSet);
ASSERT(firstLayoutObject);
for (LayoutObject* walker = firstLayoutObject; walker; walker = walker->nextInPreOrder(this)) {
if (walker == layoutObject)
return multicolSet;
if (walker == lastLayoutObject)
break;
}
}
return nullptr;
}
void LayoutMultiColumnFlowThread::appendNewFragmentainerGroupIfNeeded(LayoutUnit offsetInFlowThread)
{
if (!isPageLogicalHeightKnown()) {
// If we have no clue about the height of the multicol container, bail. This situation
// occurs initially when an auto-height multicol container is nested inside another
// auto-height multicol container. We need at least an estimated height of the outer
// multicol container before we can check what an inner fragmentainer group has room for.
// Its height is indefinite for now.
return;
}
LayoutMultiColumnSet* columnSet = columnSetAtBlockOffset(offsetInFlowThread);
if (columnSet->isInitialHeightCalculated()) {
// We only insert additional fragmentainer groups in the initial layout pass. We only want
// to balance columns in the last fragmentainer group (if we need to balance at all), so we
// want that last fragmentainer group to be the same one in all layout passes that follow.
return;
}
if (!columnSet->hasFragmentainerGroupForColumnAt(offsetInFlowThread)) {
FragmentationContext* enclosingFragmentationContext = this->enclosingFragmentationContext();
if (!enclosingFragmentationContext)
return; // Not nested. We'll never need more rows than the one we already have then.
ASSERT(!isLayoutPagedFlowThread());
// We have run out of columns here, so we add another row to hold more columns. When we add
// a new row, it implicitly means that we're inserting another column in our enclosing
// multicol container. That in turn may mean that we've run out of columns there too.
const MultiColumnFragmentainerGroup& newRow = columnSet->appendNewFragmentainerGroup();
if (LayoutMultiColumnFlowThread* enclosingFlowThread = enclosingFragmentationContext->associatedFlowThread())
enclosingFlowThread->appendNewFragmentainerGroupIfNeeded(newRow.blockOffsetInEnclosingFragmentationContext());
}
}
void LayoutMultiColumnFlowThread::skipColumnSpanner(LayoutBox* layoutObject, LayoutUnit logicalTopInFlowThread)
{
ASSERT(layoutObject->isColumnSpanAll());
LayoutMultiColumnSpannerPlaceholder* placeholder = layoutObject->spannerPlaceholder();
LayoutBox* previousColumnBox = placeholder->previousSiblingMultiColumnBox();
if (previousColumnBox && previousColumnBox->isLayoutMultiColumnSet()) {
LayoutMultiColumnSet* columnSet = toLayoutMultiColumnSet(previousColumnBox);
if (logicalTopInFlowThread < columnSet->logicalTopInFlowThread())
logicalTopInFlowThread = columnSet->logicalTopInFlowThread(); // Negative margins may cause this.
columnSet->endFlow(logicalTopInFlowThread);
}
LayoutBox* nextColumnBox = placeholder->nextSiblingMultiColumnBox();
if (nextColumnBox && nextColumnBox->isLayoutMultiColumnSet()) {
LayoutMultiColumnSet* nextSet = toLayoutMultiColumnSet(nextColumnBox);
m_lastSetWorkedOn = nextSet;
nextSet->beginFlow(logicalTopInFlowThread);
}
// We'll lay out of spanners after flow thread layout has finished (during layout of the spanner
// placeholders). There may be containing blocks for out-of-flow positioned descendants of the
// spanner in the flow thread, so that out-of-flow objects inside the spanner will be laid out
// as part of flow thread layout (even if the spanner itself won't). We need to add such
// out-of-flow positioned objects to their containing blocks now, or they'll never get laid
// out. Since it's non-trivial to determine if we need this, and where such out-of-flow objects
// might be, just go through the whole subtree.
for (LayoutObject* descendant = layoutObject->slowFirstChild(); descendant; descendant = descendant->nextInPreOrder()) {
if (descendant->isBox() && descendant->isOutOfFlowPositioned())
descendant->containingBlock()->insertPositionedObject(toLayoutBox(descendant));
}
}
void LayoutMultiColumnFlowThread::appendNewFragmentainerGroupIfNeeded(LayoutUnit bottomOffsetInFlowThread)
{
if (!isPageLogicalHeightKnown()) {
// If we have no clue about the height of the multicol container, bail. This situation
// occurs initially when an auto-height multicol container is nested inside another
// auto-height multicol container. We need at least an estimated height of the outer
// multicol container before we can check what an inner fragmentainer group has room for.
// Its height is indefinite for now.
return;
}
// TODO(mstensho): bottomOffsetInFlowThread is an endpoint-exclusive offset, i.e. the offset
// just after the bottom of some object. So, ideally, columnSetAtBlockOffset() should be
// informed about this (i.e. take a PageBoundaryRule argument). This is not the only place with
// this issue; see also pageRemainingLogicalHeightForOffset().
LayoutMultiColumnSet* columnSet = columnSetAtBlockOffset(bottomOffsetInFlowThread);
if (columnSet->isInitialHeightCalculated()) {
// We only insert additional fragmentainer groups in the initial layout pass. We only want
// to balance columns in the last fragmentainer group (if we need to balance at all), so we
// want that last fragmentainer group to be the same one in all layout passes that follow.
return;
}
if (!columnSet->hasFragmentainerGroupForColumnAt(bottomOffsetInFlowThread)) {
FragmentationContext* enclosingFragmentationContext = this->enclosingFragmentationContext();
if (!enclosingFragmentationContext)
return; // Not nested. We'll never need more rows than the one we already have then.
ASSERT(!isLayoutPagedFlowThread());
// We have run out of columns here, so we add another row to hold more columns. When we add
// a new row, it implicitly means that we're inserting another column in our enclosing
// multicol container. That in turn may mean that we've run out of columns there too.
const MultiColumnFragmentainerGroup& newRow = columnSet->appendNewFragmentainerGroup();
if (LayoutMultiColumnFlowThread* enclosingFlowThread = enclosingFragmentationContext->associatedFlowThread())
enclosingFlowThread->appendNewFragmentainerGroupIfNeeded(newRow.blockOffsetInEnclosingFragmentationContext() + newRow.logicalHeight());
}
}
LayoutSize LayoutMultiColumnFlowThread::flowThreadTranslationAtOffset(LayoutUnit offsetInFlowThread) const
{
LayoutMultiColumnSet* columnSet = columnSetAtBlockOffset(offsetInFlowThread);
if (!columnSet)
return LayoutSize(0, 0);
return columnSet->flowThreadTranslationAtOffset(offsetInFlowThread);
}
LayoutMultiColumnSet* LayoutMultiColumnSet::createAnonymous(LayoutFlowThread& flowThread, const ComputedStyle& parentStyle)
{
Document& document = flowThread.document();
LayoutMultiColumnSet* layoutObject = new LayoutMultiColumnSet(&flowThread);
layoutObject->setDocumentForAnonymous(&document);
layoutObject->setStyle(ComputedStyle::createAnonymousStyleWithDisplay(parentStyle, BLOCK));
return layoutObject;
}
LayoutUnit LayoutFlowThread::pageLogicalHeightForOffset(LayoutUnit offset)
{
LayoutMultiColumnSet* columnSet = columnSetAtBlockOffset(offset);
if (!columnSet)
return 0;
return columnSet->pageLogicalHeight();
}
void LayoutFlowThread::collectLayerFragments(DeprecatedPaintLayerFragments& layerFragments, const LayoutRect& layerBoundingBox, const LayoutRect& dirtyRect)
{
ASSERT(!m_columnSetsInvalidated);
for (LayoutMultiColumnSetList::const_iterator iter = m_multiColumnSetList.begin(); iter != m_multiColumnSetList.end(); ++iter) {
LayoutMultiColumnSet* columnSet = *iter;
columnSet->collectLayerFragments(layerFragments, layerBoundingBox, dirtyRect);
}
}
void LayoutFlowThread::computeLogicalHeight(LayoutUnit, LayoutUnit logicalTop, LogicalExtentComputedValues& computedValues) const
{
computedValues.m_position = logicalTop;
computedValues.m_extent = 0;
for (LayoutMultiColumnSetList::const_iterator iter = m_multiColumnSetList.begin(); iter != m_multiColumnSetList.end(); ++iter) {
LayoutMultiColumnSet* columnSet = *iter;
computedValues.m_extent += columnSet->logicalHeightInFlowThread();
}
}
void LayoutMultiColumnFlowThread::willBeRemovedFromTree()
{
// Detach all column sets from the flow thread. Cannot destroy them at this point, since they
// are siblings of this object, and there may be pointers to this object's sibling somewhere
// further up on the call stack.
for (LayoutMultiColumnSet* columnSet = firstMultiColumnSet(); columnSet; columnSet = columnSet->nextSiblingMultiColumnSet())
columnSet->detachFromFlowThread();
multiColumnBlockFlow()->resetMultiColumnFlowThread();
LayoutFlowThread::willBeRemovedFromTree();
}
void LayoutMultiColumnFlowThread::createAndInsertMultiColumnSet(LayoutBox* insertBefore)
{
LayoutBlockFlow* multicolContainer = multiColumnBlockFlow();
LayoutMultiColumnSet* newSet = LayoutMultiColumnSet::createAnonymous(*this, multicolContainer->styleRef());
multicolContainer->LayoutBlock::addChild(newSet, insertBefore);
invalidateColumnSets();
// We cannot handle immediate column set siblings (and there's no need for it, either).
// There has to be at least one spanner separating them.
ASSERT(!newSet->previousSiblingMultiColumnBox() || !newSet->previousSiblingMultiColumnBox()->isLayoutMultiColumnSet());
ASSERT(!newSet->nextSiblingMultiColumnBox() || !newSet->nextSiblingMultiColumnBox()->isLayoutMultiColumnSet());
}
bool MultiColumnFragmentainerGroup::recalculateColumnHeight(
LayoutMultiColumnSet& columnSet) {
LayoutUnit oldColumnHeight = m_columnHeight;
m_maxColumnHeight = calculateMaxColumnHeight();
// Only the last row may have auto height, and thus be balanced. There are no
// good reasons to balance the preceding rows, and that could potentially lead
// to an insane number of layout passes as well.
if (isLastGroup() && columnSet.heightIsAuto()) {
LayoutUnit newColumnHeight;
if (!columnSet.isInitialHeightCalculated()) {
// Initial balancing: Start with the lowest imaginable column height. Also
// calculate the height of the tallest piece of unbreakable content.
// Columns should never get any shorter than that (unless constrained by
// max-height). Propagate this to our containing column set, in case there
// is an outer multicol container that also needs to balance. After having
// calculated the initial column height, the multicol container needs
// another layout pass with the column height that we just calculated.
InitialColumnHeightFinder initialHeightFinder(
columnSet, logicalTopInFlowThread(), logicalBottomInFlowThread());
LayoutUnit tallestUnbreakableLogicalHeight =
initialHeightFinder.tallestUnbreakableLogicalHeight();
columnSet.propagateTallestUnbreakableLogicalHeight(
tallestUnbreakableLogicalHeight);
newColumnHeight =
std::max(initialHeightFinder.initialMinimalBalancedHeight(),
tallestUnbreakableLogicalHeight);
} else {
// Rebalancing: After having laid out again, we'll need to rebalance if
// the height wasn't enough and we're allowed to stretch it, and then
// re-lay out. There are further details on the column balancing
// machinery in ColumnBalancer and its derivates.
newColumnHeight = rebalanceColumnHeightIfNeeded();
}
setAndConstrainColumnHeight(newColumnHeight);
} else {
// The position of the column set may have changed, in which case height
// available for columns may have changed as well.
setAndConstrainColumnHeight(m_columnHeight);
}
if (m_columnHeight == oldColumnHeight)
return false; // No change. We're done.
return true; // Need another pass.
}
LayoutUnit LayoutFlowThread::pageRemainingLogicalHeightForOffset(LayoutUnit offset, PageBoundaryRule pageBoundaryRule)
{
LayoutMultiColumnSet* columnSet = columnSetAtBlockOffset(offset);
if (!columnSet)
return 0;
LayoutUnit pageLogicalTop = columnSet->pageLogicalTopForOffset(offset);
LayoutUnit pageLogicalHeight = columnSet->pageLogicalHeight();
LayoutUnit pageLogicalBottom = pageLogicalTop + pageLogicalHeight;
LayoutUnit remainingHeight = pageLogicalBottom - offset;
if (pageBoundaryRule == IncludePageBoundary) {
// If IncludePageBoundary is set, the line exactly on the top edge of a
// columnSet will act as being part of the previous columnSet.
remainingHeight = intMod(remainingHeight, pageLogicalHeight);
}
return remainingHeight;
}
ColumnBalancer::ColumnBalancer(const LayoutMultiColumnSet& columnSet,
LayoutUnit logicalTopInFlowThread,
LayoutUnit logicalBottomInFlowThread)
: m_columnSet(columnSet),
m_logicalTopInFlowThread(logicalTopInFlowThread),
m_logicalBottomInFlowThread(logicalBottomInFlowThread) {
DCHECK_GE(columnSet.usedColumnCount(), 1U);
}
void LayoutMultiColumnFlowThread::createAndInsertSpannerPlaceholder(LayoutBox* spannerObjectInFlowThread, LayoutObject* insertedBeforeInFlowThread)
{
LayoutBox* insertBeforeColumnBox = nullptr;
LayoutMultiColumnSet* setToSplit = nullptr;
if (insertedBeforeInFlowThread) {
// The spanner is inserted before something. Figure out what this entails. If the
// next object is a spanner too, it means that we can simply insert a new spanner
// placeholder in front of its placeholder.
insertBeforeColumnBox = insertedBeforeInFlowThread->spannerPlaceholder();
if (!insertBeforeColumnBox) {
// The next object isn't a spanner; it's regular column content. Examine what
// comes right before us in the flow thread, then.
LayoutObject* previousLayoutObject = previousInPreOrderSkippingOutOfFlow(this, spannerObjectInFlowThread);
if (!previousLayoutObject || previousLayoutObject == this) {
// The spanner is inserted as the first child of the multicol container,
// which means that we simply insert a new spanner placeholder at the
// beginning.
insertBeforeColumnBox = firstMultiColumnBox();
} else if (LayoutMultiColumnSpannerPlaceholder* previousPlaceholder = containingColumnSpannerPlaceholder(previousLayoutObject)) {
// Before us is another spanner. We belong right after it then.
insertBeforeColumnBox = previousPlaceholder->nextSiblingMultiColumnBox();
} else {
// We're inside regular column content with both feet. Find out which column
// set this is. It needs to be split it into two sets, so that we can insert
// a new spanner placeholder between them.
setToSplit = mapDescendantToColumnSet(previousLayoutObject);
ASSERT(setToSplit == mapDescendantToColumnSet(insertedBeforeInFlowThread));
insertBeforeColumnBox = setToSplit->nextSiblingMultiColumnBox();
// We've found out which set that needs to be split. Now proceed to
// inserting the spanner placeholder, and then insert a second column set.
}
}
ASSERT(setToSplit || insertBeforeColumnBox);
}
LayoutBlockFlow* multicolContainer = multiColumnBlockFlow();
LayoutMultiColumnSpannerPlaceholder* newPlaceholder = LayoutMultiColumnSpannerPlaceholder::createAnonymous(multicolContainer->styleRef(), *spannerObjectInFlowThread);
ASSERT(!insertBeforeColumnBox || insertBeforeColumnBox->parent() == multicolContainer);
multicolContainer->LayoutBlock::addChild(newPlaceholder, insertBeforeColumnBox);
spannerObjectInFlowThread->setSpannerPlaceholder(*newPlaceholder);
if (setToSplit)
createAndInsertMultiColumnSet(insertBeforeColumnBox);
}
bool LayoutMultiColumnFlowThread::recalculateColumnHeights()
{
// All column sets that needed layout have now been laid out, so we can finally validate them.
validateColumnSets();
if (!m_needsColumnHeightsRecalculation)
return false;
// Column heights may change here because of balancing. We may have to do multiple layout
// passes, depending on how the contents is fitted to the changed column heights. In most
// cases, laying out again twice or even just once will suffice. Sometimes we need more
// passes than that, though, but the number of retries should not exceed the number of
// columns, unless we have a bug.
bool needsRelayout = false;
for (LayoutMultiColumnSet* multicolSet = firstMultiColumnSet(); multicolSet; multicolSet = multicolSet->nextSiblingMultiColumnSet())
needsRelayout |= multicolSet->recalculateColumnHeight();
if (needsRelayout)
setChildNeedsLayout(MarkOnlyThis);
m_inBalancingPass = needsRelayout;
return needsRelayout;
}
InitialColumnHeightFinder::InitialColumnHeightFinder(
const LayoutMultiColumnSet& columnSet,
LayoutUnit logicalTopInFlowThread,
LayoutUnit logicalBottomInFlowThread)
: ColumnBalancer(columnSet,
logicalTopInFlowThread,
logicalBottomInFlowThread) {
m_shortestStruts.resize(columnSet.usedColumnCount());
for (auto& strut : m_shortestStruts)
strut = LayoutUnit::max();
traverse();
// We have now found each explicit / forced break, and their location. Now we
// need to figure out how many additional implicit / soft breaks we need and
// guess where they will occur, in order
// to provide an initial column height.
distributeImplicitBreaks();
}
void LayoutMultiColumnFlowThread::flowThreadDescendantWillBeRemoved(LayoutObject* descendant)
{
// This method ensures that the list of column sets and spanner placeholders reflects the
// multicol content that we'll be left with after removal of a descendant (or descendant
// subtree). See the header file for more information. Removing content may mean that we need to
// remove column sets and/or spanner placeholders.
if (m_isBeingEvacuated)
return;
if (shouldSkipInsertedOrRemovedChild(this, *descendant))
return;
bool hadContainingPlaceholder = containingColumnSpannerPlaceholder(descendant);
bool processedSomething = false;
LayoutObject* next;
// Remove spanner placeholders that are no longer needed, and merge column sets around them.
for (LayoutObject* layoutObject = descendant; layoutObject; layoutObject = next) {
if (layoutObject != descendant && shouldSkipInsertedOrRemovedChild(this, *layoutObject)) {
next = layoutObject->nextInPreOrderAfterChildren(descendant);
continue;
}
processedSomething = true;
LayoutMultiColumnSpannerPlaceholder* placeholder = layoutObject->spannerPlaceholder();
if (!placeholder) {
next = layoutObject->nextInPreOrder(descendant);
continue;
}
next = layoutObject->nextInPreOrderAfterChildren(descendant); // It's a spanner. Its children are of no interest to us.
destroySpannerPlaceholder(placeholder);
}
if (hadContainingPlaceholder || !processedSomething)
return; // No column content will be removed, so we can stop here.
// Column content will be removed. Does this mean that we should destroy a column set?
LayoutMultiColumnSpannerPlaceholder* adjacentPreviousSpannerPlaceholder = nullptr;
LayoutObject* previousLayoutObject = previousInPreOrderSkippingOutOfFlow(this, descendant);
if (previousLayoutObject && previousLayoutObject != this) {
adjacentPreviousSpannerPlaceholder = containingColumnSpannerPlaceholder(previousLayoutObject);
if (!adjacentPreviousSpannerPlaceholder)
return; // Preceded by column content. Set still needed.
}
LayoutMultiColumnSpannerPlaceholder* adjacentNextSpannerPlaceholder = nullptr;
LayoutObject* nextLayoutObject = nextInPreOrderAfterChildrenSkippingOutOfFlow(this, descendant);
if (nextLayoutObject) {
adjacentNextSpannerPlaceholder = containingColumnSpannerPlaceholder(nextLayoutObject);
if (!adjacentNextSpannerPlaceholder)
return; // Followed by column content. Set still needed.
}
// We have now determined that, with the removal of |descendant|, we should remove a column
// set. Locate it and remove it. Do it without involving mapDescendantToColumnSet(), as that
// might be very slow. Deduce the right set from the spanner placeholders that we've already
// found.
LayoutMultiColumnSet* columnSetToRemove;
if (adjacentNextSpannerPlaceholder) {
columnSetToRemove = toLayoutMultiColumnSet(adjacentNextSpannerPlaceholder->previousSiblingMultiColumnBox());
ASSERT(!adjacentPreviousSpannerPlaceholder || columnSetToRemove == adjacentPreviousSpannerPlaceholder->nextSiblingMultiColumnBox());
} else if (adjacentPreviousSpannerPlaceholder) {
columnSetToRemove = toLayoutMultiColumnSet(adjacentPreviousSpannerPlaceholder->nextSiblingMultiColumnBox());
} else {
// If there were no adjacent spanners, it has to mean that there's only one column set,
// since it's only spanners that may cause creation of multiple sets.
columnSetToRemove = firstMultiColumnSet();
ASSERT(columnSetToRemove);
ASSERT(!columnSetToRemove->nextSiblingMultiColumnSet());
}
ASSERT(columnSetToRemove);
columnSetToRemove->destroy();
}
void LayoutMultiColumnFlowThread::columnRuleStyleDidChange()
{
for (LayoutMultiColumnSet* columnSet = firstMultiColumnSet(); columnSet; columnSet = columnSet->nextSiblingMultiColumnSet())
columnSet->setShouldDoFullPaintInvalidation(PaintInvalidationStyleChange);
}
