コード例 #1
0
ファイル: ToolMapping.cpp プロジェクト: artemeliy/inf4715
void UnwrapMod::ApplyGizmo()
{

	if ((fnGetMapMode() == PLANARMAP) || (fnGetMapMode() == PELTMAP) ||
		(fnGetMapMode() == SPHERICALMAP) || (fnGetMapMode() == CYLINDRICALMAP))
	{
		ApplyGizmoPrivate();
	}
	else
	{
  		theHold.Begin();
		//compute the center
			//get our normal list
		for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
		{
			MeshTopoData *ld = mMeshTopoData[ldID];
			ld->HoldFaceSel();
		}

		for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
		{
			MeshTopoData *ld = mMeshTopoData[ldID];
			ld->HoldFaceSel();

			Tab<Point3> fnorms;
			fnorms.SetCount(ld->GetNumberFaces());
			for (int k=0; k< fnorms.Count(); k++) 
				fnorms[k] = Point3(0.0f,0.0f,0.0f);
				
			//get our projection normal
			Point3 projectionNorm(0.0f,0.0f,0.0f);

			//build normals
			for (int k = 0; k < fnorms.Count(); k++) 
			{
				if (ld->GetFaceSelected(k))
				{
							// Grap the three points, xformed
					int pcount = 3;
					//				if (gfaces[k].flags & FLAG_QUAD) pcount = 4;
					pcount = ld->GetFaceDegree(k);//gfaces[k]->count;

					Point3 temp_point[4];
					for (int j=0; j<pcount; j++) 
					{
						int index = ld->GetFaceGeomVert(k,j);//gfaces[k]->t[j];							
						if (j < 4)
							temp_point[j] = ld->GetGeomVert(index);//gverts.d[index].p;
					}
					
					fnorms[k] = Normalize(temp_point[1]-temp_point[0]^temp_point[2]-temp_point[1]);
				}
			}
				
			BitArray front,back,left,right,top,bottom;
			front.SetSize(ld->GetNumberFaces());
			front.ClearAll();
			back = front;
			left = front;
			right = front;
			top = front;
			bottom = front;

			Tab<Point3> norms;

			Matrix3 gtm(1);
			TimeValue t = 0;
			if (ip) t = ip->GetTime();
			if (tmControl)
				tmControl->GetValue(t,&gtm,FOREVER,CTRL_RELATIVE);

			norms.SetCount(6);
			for (int i = 0; i < 3; i++)
			{
				Point3 v = gtm.GetRow(i);
				norms[i*2] = Normalize(v);
				norms[i*2+1] = norms[i*2] * -1.0f;
			}
				
			for (int k=0; k< ld->GetNumberFaces(); k++) 
			{
				if (ld->GetFaceSelected(k))
				{
					int closestFace = -1;
					float closestAngle = -10.0f;
					for (int j = 0; j < 6; j++)
					{
						float dot = DotProd(norms[j],fnorms[k]);
						if (dot > closestAngle)
						{
							closestAngle = dot;
							closestFace = j;
						}
					}
					if (closestFace == 0)
						front.Set(k,TRUE);
					else if (closestFace == 1)
						back.Set(k,TRUE);
					else if (closestFace == 2)
						left.Set(k,TRUE);
					else if (closestFace == 3)
						right.Set(k,TRUE);
					else if (closestFace == 4)
						top.Set(k,TRUE);
					else if (closestFace == 5)
						bottom.Set(k,TRUE);
				}
			}


			gtm.IdentityMatrix();
			if (tmControl)
				tmControl->GetValue(t,&gtm,FOREVER,CTRL_RELATIVE);

			Point3 xvec,yvec,zvec;
			xvec = gtm.GetRow(0);
			yvec = gtm.GetRow(1);
			zvec = gtm.GetRow(2);
  			Point3 center = gtm.GetRow(3);


			for (int k = 0; k < 6; k++)
			{

				Matrix3 tm(1);
				if (k == 0)
				{
					tm.SetRow(0,yvec);
					tm.SetRow(1,zvec);
					tm.SetRow(2,xvec);
					ld->SetFaceSelection(front);
				}
				else if (k == 1)
				{
					tm.SetRow(0,yvec);
					tm.SetRow(1,zvec);
					tm.SetRow(2,(xvec*-1.0f));

					ld->SetFaceSelection(back);
				}
				else if (k == 2)
				{
					tm.SetRow(0,xvec);
					tm.SetRow(1,zvec);
					tm.SetRow(2,yvec);

					ld->SetFaceSelection(left);
				}
				else if (k == 3)
				{
					tm.SetRow(0,xvec);
					tm.SetRow(1,zvec);
					tm.SetRow(2,(yvec *-1.0f));

					ld->SetFaceSelection(right);
				}
				else if (k == 4)
				{
					tm.SetRow(0,xvec);
					tm.SetRow(1,yvec);
					tm.SetRow(2,zvec);

					ld->SetFaceSelection(top);
				}
				else if (k == 5)
				{
					tm.SetRow(0,xvec);
					tm.SetRow(1,yvec);
					tm.SetRow(2,(zvec*-1.0f));

					ld->SetFaceSelection(bottom);
				}

				

				tm.SetRow(3,center);

				if (!fnGetNormalizeMap())
				{
					for (int i = 0; i < 3; i++)
					{
						Point3 vec = tm.GetRow(i);
						vec = Normalize(vec);
						tm.SetRow(i,vec);
					}
				}

				tm = mMeshTopoData.GetNodeTM(t,ldID) * Inverse(tm);
				ld->ApplyMap(fnGetMapMode(), fnGetNormalizeMap(), tm, this);				
			}
			ld->RestoreFaceSel();
		}

		theHold.Accept(GetString(IDS_PW_PLANARMAP));
		
	}

}
コード例 #2
0
void	UnwrapMod::fnPaste(BOOL rotate)
	{
	//check for type

	TimeValue t = GetCOREInterface()->GetTime();
	theHold.Begin();
	HoldPointsAndFaces();

	for (int ldID = 0; ldID < mMeshTopoData.Count(); ldID++)
	{
		MeshTopoData *ld = mMeshTopoData[ldID];


//check faces if just one selected normal paste with rotates
//or if all faces where selected
//or if first paste

//hold the points and faces


		BitArray holdFaceSel(ld->GetFaceSelection());

		BitArray subFaceSel;
		if ( ip && (ip->GetSubObjectLevel() == 0) )
			{
//convert our current selection into faces			
			if (fnGetTVSubMode() == TVVERTMODE)
				ld->GetFaceSelFromVert(subFaceSel,FALSE);
			else if (fnGetTVSubMode() == TVEDGEMODE)
				{
				BitArray tempVSel;
				ld->GetVertSelFromEdge(tempVSel);
				BitArray vsel = ld->GetTVVertSelection();
				BitArray holdVSel(vsel);
				ld->SetTVVertSelection(tempVSel);//vsel = tempVSel;
				ld->GetFaceSelFromVert(subFaceSel,FALSE);
				ld->SetTVVertSelection(holdVSel);//vsel = holdVSel;

				}
			else if (fnGetTVSubMode() == TVFACEMODE)
				{
				subFaceSel = ld->GetFaceSelection();//.SetSize(fsel.GetSize());
				//subFaceSel = fsel;
				}
			}
		else
			{
			if (fnGetTVSubMode() == TVFACEMODE)
				{
				subFaceSel = ld->GetFaceSelection();//.SetSize(fsel.GetSize());
				//subFaceSel = fsel;
				}

			}

		if ( (copyPasteBuffer.copyType == 0) || (copyPasteBuffer.copyType == 1) || (copyPasteBuffer.iRotate==0))
			{
			int copyIndex = 0;
			Tab<int> vertexLookUpList;

			vertexLookUpList.SetCount(copyPasteBuffer.tVertData.Count());

			BitArray faceSel = ld->GetFaceSelection();

			for (int i =0; i < vertexLookUpList.Count(); i++)
				vertexLookUpList[i] = -1;
			if (copyPasteBuffer.copyType == 1)
				copyPasteBuffer.iRotate = 0;
			else 
				{
				if (copyPasteBuffer.lastSel.GetSize() == faceSel.GetSize())
					{
					if (copyPasteBuffer.lastSel == faceSel) 
						{

						if (rotate)
							{
							copyPasteBuffer.iRotate++;
							}
						else copyPasteBuffer.iRotate = 0;

						
						}
					}
				}
			if (copyPasteBuffer.copyType == 2) copyPasteBuffer.iRotate = 0;
			copyPasteBuffer.lastSel = faceSel;

//loop through selected faces
			for (int i =0; i < faceSel.GetSize(); i++)
				{
				if (faceSel[i])
					{
//make sure selected faces count = buffer face
					if (( i < ld->GetNumberFaces()/*TVMaps.f.Count()*/) && (copyIndex < copyPasteBuffer.faceData.Count()))
						{
						int degree = ld->GetFaceDegree(i);
						if (/*TVMaps.f[i]->count*/ degree == copyPasteBuffer.faceData[copyIndex]->count)
							{
//if so	set the face data indices as the same
							for (int j = 0; j < degree/*TVMaps.f[i]->count*/; j++)
								{
							//index into the texture vertlist
							
								int vid = (j + copyPasteBuffer.iRotate)%degree;//TVMaps.f[i]->count;
								int vertexIndex = copyPasteBuffer.faceData[copyIndex]->t[vid];

								if (vertexLookUpList[vertexIndex] == -1)
									{
									Point3 p = copyPasteBuffer.tVertData[vertexIndex];
									ld->AddTVVert(t, p, i, j, this,FALSE);//ld->AddPoint(p, i, j,FALSE);
									vertexLookUpList[vertexIndex] = ld->GetFaceTVVert(i,j);//TVMaps.f[i]->t[j];
									}
								else 
									 ld->SetFaceTVVert(i,j,vertexLookUpList[vertexIndex]);//TVMaps.f[i]->t[j] = vertexLookUpList[vertexIndex];

								if ((ld->GetFaceHasVectors(i)/*TVMaps.f[i]->vecs*/) && (copyPasteBuffer.faceData[copyIndex]->vecs) && (j < 4))
									{
									int hid = (j*2 + (copyPasteBuffer.iRotate*2))%(/*TVMaps.f[i]->count*/degree*2);
									int handleIndex = copyPasteBuffer.faceData[copyIndex]->vecs->handles[hid];
									if ((handleIndex >= 0) && (vertexLookUpList[handleIndex] == -1))
										{
										Point3 p = copyPasteBuffer.tVertData[handleIndex];
										ld->AddTVHandle(t,p, i, j*2,this,FALSE);
										vertexLookUpList[handleIndex] = ld->GetFaceTVHandle(i,j*2);// TVMaps.f[i]->vecs->handles[j*2];
										}
									else 
										ld->SetFaceTVHandle(i,j*2,vertexLookUpList[handleIndex]);//TVMaps.f[i]->vecs->handles[j*2] = vertexLookUpList[handleIndex];
	
									hid = (j*2 + (copyPasteBuffer.iRotate*2))%(degree/*TVMaps.f[i]->count*/*2)+1;
									handleIndex = copyPasteBuffer.faceData[copyIndex]->vecs->handles[hid];
									if ((handleIndex >= 0) && (vertexLookUpList[handleIndex] == -1))
										{
										Point3 p = copyPasteBuffer.tVertData[handleIndex];
										ld->AddTVHandle(t,p, i, j*2+1,this,FALSE);
										vertexLookUpList[handleIndex] = ld->GetFaceTVHandle(i,j*2+1);//TVMaps.f[i]->vecs->handles[j*2+1];
										}
									else 
										ld->SetFaceTVHandle(i,j*2+1,vertexLookUpList[handleIndex]);//TVMaps.f[i]->vecs->handles[j*2+1] = vertexLookUpList[handleIndex];
	
									int iid = (j + (copyPasteBuffer.iRotate))%degree;//(TVMaps.f[i]->count);
									int interiorIndex = copyPasteBuffer.faceData[copyIndex]->vecs->interiors[iid];
									if ((interiorIndex >= 0) && (vertexLookUpList[interiorIndex] == -1))
										{
										Point3 p = copyPasteBuffer.tVertData[interiorIndex];
										ld->AddTVInterior(t,p, i, j,this,FALSE);
										vertexLookUpList[interiorIndex] = ld->GetFaceTVInterior(i,j);//TVMaps.f[i]->vecs->handles[j];
										}
									else 
										ld->SetFaceTVInterior(i,j,vertexLookUpList[interiorIndex]);//TVMaps.f[i]->vecs->interiors[j] = vertexLookUpList[interiorIndex];
									}
								}
							copyIndex++;
							if (copyIndex >= copyPasteBuffer.faceData.Count()) copyIndex = 0;
							}
						}	
					}

				}

			}
		
		ld->SetTVEdgeInvalid();//RebuildEdges();

		if ( ip && (ip->GetSubObjectLevel() == 0) )
			{
			if (fnGetTVSubMode() == TVVERTMODE)
				{
				BitArray fsel = ld->GetFaceSelection();
				BitArray vsel = ld->GetTVVertSelection();
				BitArray holdFSel(fsel);
				fsel = subFaceSel;
				ld->GetVertSelFromFace(vsel);
				ld->SetTVVertSelection(vsel);
				ld->SetFaceSelection(holdFSel);//fsel = holdFSel;
				}
			else if (fnGetTVSubMode() == TVEDGEMODE)
				{
				BitArray fsel = ld->GetFaceSelection();
				BitArray esel = ld->GetTVEdgeSelection();
				BitArray holdFSel(fsel);
				fsel = subFaceSel;
				ld->GetVertSelFromFace(fsel);
				ld->SetFaceSelection(fsel);//
				ld->GetEdgeSelFromVert(esel,FALSE);
				ld->SetTVEdgeSelection(esel);
				ld->SetFaceSelection(holdFSel);//fsel = holdFSel;
				}
			else if (fnGetTVSubMode() == TVFACEMODE)
				{				
				ld->SetFaceSelection(subFaceSel);//fsel = subFaceSel;
				}

			}
		else
			{
//			md->faceSel = holdFaceSel;
			ld->SetFaceSelection(subFaceSel);
/*
			if (fnGetTVSubMode() == TVFACEMODE)
				{
				ld->SetFaceSelection(subFaceSel);//fsel = subFaceSel;
				}
*/
			}

		}
		CleanUpDeadVertices();
		theHold.Accept(GetString(IDS_PW_PASTE));

		NotifyDependents(FOREVER,PART_ALL,REFMSG_CHANGE);
		InvalidateView();
		GetCOREInterface()->RedrawViews(GetCOREInterface()->GetTime());		

	}