OsdHbrMesh *
ConvertToHBR( int nVertices,
std::vector<int> const & faceVertCounts,
std::vector<int> const & faceIndices,
std::vector<int> const & vtxCreaseIndices,
std::vector<double> const & vtxCreases,
std::vector<int> const & edgeCrease1Indices, // face index, local edge index
std::vector<float> const & edgeCreases1,
std::vector<int> const & edgeCrease2Indices, // 2 vertex indices (Maya friendly)
std::vector<double> const & edgeCreases2,
OsdHbrMesh::InterpolateBoundaryMethod interpBoundary,
HbrMeshUtil::SchemeType scheme,
bool usingPtex,
FVarDataDesc const * fvarDesc,
std::vector<float> const * fvarData
)
{
static OpenSubdiv::HbrBilinearSubdivision<OpenSubdiv::OsdVertex> _bilinear;
static OpenSubdiv::HbrLoopSubdivision<OpenSubdiv::OsdVertex> _loop;
static OpenSubdiv::HbrCatmarkSubdivision<OpenSubdiv::OsdVertex> _catmark;
// Build HBR mesh with/without face varying data, according to input data.
// If a face-varying descriptor is passed in its memory needs to stay
// alive as long as this hbrMesh is alive (for indices and widths arrays).
OsdHbrMesh *hbrMesh;
if ( fvarDesc )
{
if (scheme == HbrMeshUtil::kCatmark)
hbrMesh = new OsdHbrMesh(&_catmark, fvarDesc->getCount(),
fvarDesc->getIndices(),
fvarDesc->getWidths(),
fvarDesc->getTotalWidth());
else if (scheme == HbrMeshUtil::kLoop)
hbrMesh = new OsdHbrMesh(&_loop, fvarDesc->getCount(),
fvarDesc->getIndices(),
fvarDesc->getWidths(),
fvarDesc->getTotalWidth());
else
hbrMesh = new OsdHbrMesh(&_bilinear, fvarDesc->getCount(),
fvarDesc->getIndices(),
fvarDesc->getWidths(),
fvarDesc->getTotalWidth());
}
else
{
if (scheme == HbrMeshUtil::kCatmark)
hbrMesh = new OsdHbrMesh(&_catmark);
else if (scheme == HbrMeshUtil::kLoop)
hbrMesh = new OsdHbrMesh(&_loop);
else
hbrMesh = new OsdHbrMesh(&_bilinear);
}
// create empty verts: actual vertices initialized in UpdatePoints();
OpenSubdiv::OsdVertex v;
for (int i = 0; i < nVertices; ++i) {
hbrMesh->NewVertex(i, v);
}
std::vector<int> vIndex;
int nFaces = (int)faceVertCounts.size();
int fvcOffset = 0; // face-vertex count offset
int ptxIdx = 0;
for (int fi = 0; fi < nFaces; ++fi)
{
int nFaceVerts = faceVertCounts[fi];
vIndex.resize(nFaceVerts);
bool valid = true;
for (int fvi = 0; fvi < nFaceVerts; ++fvi)
{
vIndex[fvi] = faceIndices[fvi + fvcOffset];
int vNextIndex = faceIndices[(fvi+1) % nFaceVerts + fvcOffset];
// check for non-manifold face
OsdHbrVertex * origin = hbrMesh->GetVertex(vIndex[fvi]);
OsdHbrVertex * destination = hbrMesh->GetVertex(vNextIndex);
if (!origin || !destination) {
OSD_ERROR("ERROR : An edge was specified that connected a nonexistent vertex");
valid = false;
}
if (origin == destination) {
OSD_ERROR("ERROR : An edge was specified that connected a vertex to itself");
valid = false;
}
OsdHbrHalfedge * opposite = destination->GetEdge(origin);
if (opposite && opposite->GetOpposite()) {
OSD_ERROR("ERROR : A non-manifold edge incident to more than 2 faces was found");
valid = false;
}
if (origin->GetEdge(destination)) {
OSD_ERROR("ERROR : An edge connecting two vertices was specified more than once. "
"It's likely that an incident face was flipped");
valid = false;
}
}
if ( valid )
{
if (scheme == HbrMeshUtil::kLoop) {
// triangulate
int triangle[3];
triangle[0] = vIndex[0];
for (int fvi = 2; fvi < nFaceVerts; ++fvi) {
triangle[1] = vIndex[fvi-1];
triangle[2] = vIndex[fvi];
hbrMesh->NewFace(3, triangle, 0);
}
// ptex not fully implemented for loop, yet
// fvar not fully implemented for loop, yet
} else {
// bilinear not entirely implemented
OsdHbrFace *face = hbrMesh->NewFace(nFaceVerts, &(vIndex[0]), 0);
if (usingPtex) {
face->SetPtexIndex(ptxIdx);
ptxIdx += (nFaceVerts == 4) ? 1 : nFaceVerts;
}
if (fvarData) {
int fvarWidth = hbrMesh->GetTotalFVarWidth();
const float *faceData = &(*fvarData)[ fvcOffset*fvarWidth ];
for(int fvi=0; fvi<nFaceVerts; ++fvi)
{
OsdHbrVertex *v = hbrMesh->GetVertex( vIndex[fvi] );
OsdHbrFVarData& fvarData = v->GetFVarData(face);
if ( ! fvarData.IsInitialized() )
{
fvarData.SetAllData( fvarWidth, faceData );
}
else if (!fvarData.CompareAll(fvarWidth, faceData))
{
OsdHbrFVarData& fvarData = v->NewFVarData(face);
fvarData.SetAllData( fvarWidth, faceData );
}
// advance pointer to next set of face-varying data
faceData += fvarWidth;
}
}
}
} else {
OSD_ERROR("Face %d will be ignored\n", fi);
}
fvcOffset += nFaceVerts;
}
// Assign boundary interpolation methods
hbrMesh->SetInterpolateBoundaryMethod(interpBoundary);
if ( fvarDesc )
hbrMesh->SetFVarInterpolateBoundaryMethod(fvarDesc->getInterpBoundary());
// XXX hbr behavior doesn't match naming of k_Interpolate constants
// hbrMesh->SetFVarInterpolateBoundaryMethod(OsdHbrMesh::k_InterpolateBoundaryEdgeAndCorner); // no for cube
// hbrMesh->SetFVarInterpolateBoundaryMethod(OsdHbrMesh::k_InterpolateBoundaryNone); // yes for cube
// hbrMesh->SetFVarInterpolateBoundaryMethod(OsdHbrMesh::k_InterpolateBoundaryEdgeOnly);
// set edge crease in two different indexing way
size_t nEdgeCreases = edgeCreases1.size();
for (size_t i = 0; i < nEdgeCreases; ++i) {
if (edgeCreases1[i] <= 0.0)
continue;
OsdHbrHalfedge * e = hbrMesh->
GetFace(edgeCrease1Indices[i*2])->
GetEdge(edgeCrease1Indices[i*2+1]);
if (!e) {
OSD_ERROR("Can't find edge (face %d edge %d)\n",
edgeCrease1Indices[i*2], edgeCrease1Indices[i*2+1]);
continue;
}
e->SetSharpness(static_cast<float>(edgeCreases1[i]));
}
nEdgeCreases = edgeCreases2.size();
for (size_t i = 0; i < nEdgeCreases; ++i) {
if (edgeCreases2[i] <= 0.0)
continue;
OsdHbrVertex * v0 = hbrMesh->GetVertex(edgeCrease2Indices[i*2]);
OsdHbrVertex * v1 = hbrMesh->GetVertex(edgeCrease2Indices[i*2+1]);
OsdHbrHalfedge * e = NULL;
if (v0 && v1)
if (!(e = v0->GetEdge(v1)))
e = v1->GetEdge(v0);
if (!e) {
OSD_ERROR("ERROR can't find edge");
continue;
}
e->SetSharpness(static_cast<float>(edgeCreases2[i]));
}
// set corner
{
size_t nVertexCreases = vtxCreases.size();
for (size_t i = 0; i < nVertexCreases; ++i) {
if (vtxCreases[i] <= 0.0)
continue;
OsdHbrVertex * v = hbrMesh->GetVertex(vtxCreaseIndices[i]);
if (!v) {
OSD_ERROR("Can't find vertex %d\n", vtxCreaseIndices[i]);
continue;
}
v->SetSharpness(static_cast<float>(vtxCreases[i]));
}
}
hbrMesh->Finish();
return hbrMesh;
}
// Here is where the real meat of the OSD setup happens. The mesh topology is
// created and stored for later use. Actual subdivision happens in updateGeom
// which gets called at the end of this function and on frame change.
//
void
createOsdContext(int level)
{
//
// Setup an OsdHbr mesh based on the desired subdivision scheme
//
static OpenSubdiv::HbrCatmarkSubdivision<OpenSubdiv::OsdVertex> _catmark;
OsdHbrMesh *hmesh(new OsdHbrMesh(&_catmark));
//
// Now that we have a mesh, we need to add verticies and define the topology.
// Here, we've declared the raw vertex data in-line, for simplicity
//
float verts[] = { 0.000000f, -1.414214f, 1.000000f,
1.414214f, 0.000000f, 1.000000f,
-1.414214f, 0.000000f, 1.000000f,
0.000000f, 1.414214f, 1.000000f,
-1.414214f, 0.000000f, -1.000000f,
0.000000f, 1.414214f, -1.000000f,
0.000000f, -1.414214f, -1.000000f,
1.414214f, 0.000000f, -1.000000f
};
//
// The cube faces are also in-lined, here they are specified as quads
//
int faces[] = {
0,1,3,2,
2,3,5,4,
4,5,7,6,
6,7,1,0,
1,7,5,3,
6,0,2,4
};
//
// Record the original vertex positions and add verts to the mesh.
//
// OsdVertex is really just a place holder, it doesn't care what the
// position of the vertex is, it's just being used here as a means of
// defining the mesh topology.
//
for (unsigned i = 0; i < sizeof(verts)/sizeof(float); i += 3) {
g_orgPositions.push_back(verts[i+0]);
g_orgPositions.push_back(verts[i+1]);
g_orgPositions.push_back(verts[i+2]);
OpenSubdiv::OsdVertex vert;
hmesh->NewVertex(i/3, vert);
}
//
// Now specify the actual mesh topology by processing the faces array
//
const unsigned VERTS_PER_FACE = 4;
for (unsigned i = 0; i < sizeof(faces)/sizeof(int); i += VERTS_PER_FACE) {
//
// Do some sanity checking. It is a good idea to keep this in your
// code for your personal sanity as well.
//
// Note that this loop is not changing the HbrMesh, it's purely validating
// the topology that is about to be created below.
//
for (unsigned j = 0; j < VERTS_PER_FACE; j++) {
OsdHbrVertex * origin = hmesh->GetVertex(faces[i+j]);
OsdHbrVertex * destination = hmesh->GetVertex(faces[i+((j+1)%VERTS_PER_FACE)]);
OsdHbrHalfedge * opposite = destination->GetEdge(origin);
if(origin==NULL || destination==NULL) {
std::cerr <<
" An edge was specified that connected a nonexistent vertex"
<< std::endl;
exit(1);
}
if(origin == destination) {
std::cerr <<
" An edge was specified that connected a vertex to itself"
<< std::endl;
exit(1);
}
if(opposite && opposite->GetOpposite() ) {
std::cerr <<
" A non-manifold edge incident to more than 2 faces was found"
<< std::endl;
exit(1);
}
if(origin->GetEdge(destination)) {
std::cerr <<
" An edge connecting two vertices was specified more than once."
" It's likely that an incident face was flipped"
<< std::endl;
exit(1);
}
}
//
// Now, create current face given the number of verts per face and the
// face index data.
//
/* OsdHbrFace * face = */ hmesh->NewFace(VERTS_PER_FACE, faces+i, 0);
//
// If you had ptex data, you would set it here, for example
//
/* face->SetPtexIndex(ptexIndex) */
}
//
// Apply some tags to drive the subdivision algorithm. Here we set the
// default boundary interpolation mode along with a corner sharpness. See
// the API and the renderman spec for the full list of available operations.
//
hmesh->SetInterpolateBoundaryMethod( OsdHbrMesh::k_InterpolateBoundaryEdgeOnly );
OsdHbrVertex * v = hmesh->GetVertex(0);
v->SetSharpness(2.7f);
//
// Finalize the mesh object. The Finish() call is a signal to the internals
// that optimizations can be made on the mesh data.
//
hmesh->Finish();
//
// Setup some raw vectors of data. Remember that the actual point values were
// not stored in the OsdVertex, so we keep track of them here instead
//
g_normals.resize(g_orgPositions.size(),0.0f);
calcNormals( hmesh, g_orgPositions, g_normals );
//
// At this point, we no longer need the topological structure of the mesh,
// so we bake it down into subdivision tables by converting the HBR mesh
// into an OSD mesh. Note that this is just storing the initial subdivision
// tables, which will be used later during the actual subdivision process.
//
// Again, no vertex positions are being stored here, the point data will be
// sent to the mesh in updateGeom().
//
OpenSubdiv::FarMeshFactory<OpenSubdiv::OsdVertex> meshFactory(hmesh, level);
g_farmesh = meshFactory.Create();
g_osdComputeContext = OpenSubdiv::OsdCpuComputeContext::Create(g_farmesh);
delete hmesh;
//
// Initialize draw context and vertex buffer
//
g_vertexBuffer =
OpenSubdiv::OsdCpuGLVertexBuffer::Create(6, /* 3 floats for position,
+
3 floats for normal*/
g_farmesh->GetNumVertices());
g_drawContext =
OpenSubdiv::OsdGLDrawContext::Create(g_farmesh->GetPatchTables(), false);
g_drawContext->UpdateVertexTexture(g_vertexBuffer);
//
// Setup camera positioning based on object bounds. This really has nothing
// to do with OSD.
//
computeCenterAndSize(g_orgPositions, g_center, &g_size);
//
// Finally, make an explicit call to updateGeom() to force creation of the
// initial buffer objects for the first draw call.
//
updateGeom();
//
// The OsdVertexBuffer provides GL identifiers which can be bound in the
// standard way. Here we setup a single VAO and enable points and normals
// as attributes on the vertex buffer and set the index buffer.
//
GLuint vao;
glGenVertexArrays(1, &vao);
glBindVertexArray(vao);
glBindBuffer(GL_ARRAY_BUFFER, g_vertexBuffer->BindVBO());
glEnableVertexAttribArray(0);
glEnableVertexAttribArray(1);
glVertexAttribPointer(0, 3, GL_FLOAT, GL_FALSE, sizeof (GLfloat) * 6, 0);
glVertexAttribPointer(1, 3, GL_FLOAT, GL_FALSE, sizeof (GLfloat) * 6, (float*)12);
glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, g_drawContext->GetPatchIndexBuffer());
glBindBuffer(GL_ARRAY_BUFFER, 0);
}
