QgsConstWkbPtr QgsSymbolV2::_getLineString( QPolygonF& pts, QgsRenderContext& context, QgsConstWkbPtr wkbPtr, bool clipToExtent )
{
QgsWKBTypes::Type wkbType = wkbPtr.readHeader();
unsigned int nPoints;
wkbPtr >> nPoints;
const QgsCoordinateTransform* ct = context.coordinateTransform();
const QgsMapToPixel& mtp = context.mapToPixel();
//apply clipping for large lines to achieve a better rendering performance
if ( clipToExtent && nPoints > 1 )
{
const QgsRectangle& e = context.extent();
double cw = e.width() / 10;
double ch = e.height() / 10;
QgsRectangle clipRect( e.xMinimum() - cw, e.yMinimum() - ch, e.xMaximum() + cw, e.yMaximum() + ch );
wkbPtr -= 1 + 2 * sizeof( int );
wkbPtr = QgsClipper::clippedLineWKB( wkbPtr, clipRect, pts );
}
else
{
pts.resize( nPoints );
int skipZM = ( QgsWKBTypes::coordDimensions( wkbType ) - 2 ) * sizeof( double );
Q_ASSERT( skipZM >= 0 );
QPointF *ptr = pts.data();
for ( unsigned int i = 0; i < nPoints; ++i, ++ptr )
{
wkbPtr >> ptr->rx() >> ptr->ry();
wkbPtr += skipZM;
}
}
//transform the QPolygonF to screen coordinates
if ( ct )
{
ct->transformPolygon( pts );
}
QPointF *ptr = pts.data();
for ( int i = 0; i < pts.size(); ++i, ++ptr )
{
mtp.transformInPlace( ptr->rx(), ptr->ry() );
}
return wkbPtr;
}
const QwtArray<QwtDoublePoint> & points) const
#else
QPolygonF QwtSplineCurveFitter::fitCurve(const QPolygonF &points) const
#endif
{
const int size = (int)points.size();
if ( size <= 2 )
return points;
FitMode fitMode = d_data->fitMode;
if ( fitMode == Auto )
{
fitMode = Spline;
const QwtDoublePoint *p = points.data();
for ( int i = 1; i < size; i++ )
{
if ( p[i].x() <= p[i-1].x() )
{
fitMode = ParametricSpline;
break;
}
};
}
if ( fitMode == ParametricSpline )
return fitParametric(points);
else
return fitSpline(points);
}
void UwMath::fromConformalInverted(QPolygonF &object) {
QPointF * data = object.data();
for(int i = 0; i < object.size(); i++) {
data[i].setX(UwMath::toDegrees(object.at(i).x()));
data[i].setY(UwMath::fromMercator(object.at(i).y() * (-1)));
}
}
/** Converts a list of points from degrees to a conformal
* point in Mercator projection
* @param points in longitude, latitude given in degrees (DD)
* @return conformal points in radians
*/
void UwMath::toConformal(QPolygonF &object) {
QPointF * data = object.data();
for(int i = 0; i < object.size(); i++) {
data[i].setX(UwMath::toRadians(object.at(i).x()));
data[i].setY(UwMath::toMercator(object.at(i).y()));
}
}
QPolygonF QwtSplineCurveFitter::fitParametric( const QPolygonF &points ) const
{
int i;
const int size = points.size();
QPolygonF fittedPoints( d_data->splineSize );
QPolygonF splinePointsX( size );
QPolygonF splinePointsY( size );
const QPointF *p = points.data();
QPointF *spX = splinePointsX.data();
QPointF *spY = splinePointsY.data();
double param = 0.0;
for ( i = 0; i < size; i++ )
{
const double x = p[i].x();
const double y = p[i].y();
if ( i > 0 )
{
const double delta = qSqrt( qwtSqr( x - spX[i-1].y() )
+ qwtSqr( y - spY[i-1].y() ) );
param += qMax( delta, 1.0 );
}
spX[i].setX( param );
spX[i].setY( x );
spY[i].setX( param );
spY[i].setY( y );
}
d_data->spline.setPoints( splinePointsX );
if ( !d_data->spline.isValid() )
return points;
const double deltaX =
splinePointsX[size - 1].x() / ( d_data->splineSize - 1 );
for ( i = 0; i < d_data->splineSize; i++ )
{
const double dtmp = i * deltaX;
fittedPoints[i].setX( qRound( d_data->spline.value( dtmp ) ) );
}
d_data->spline.setPoints( splinePointsY );
if ( !d_data->spline.isValid() )
return points;
const double deltaY =
splinePointsY[size - 1].x() / ( d_data->splineSize - 1 );
for ( i = 0; i < d_data->splineSize; i++ )
{
const double dtmp = i * deltaY;
fittedPoints[i].setY( qRound( d_data->spline.value( dtmp ) ) );
}
return fittedPoints;
}
QPolygonF bezier_fit_cubic_single( const QPolygonF& data, double error )
{
QPolygonF out(4);
const int retn = sp_bezier_fit_cubic(out.data(), data.data(),
data.count(), error);
if( retn >= 0 )
return out;
else
return QPolygonF();
}
// we need a higher threshold for failure here than in the above tests, as this basically draws
// a very thin outline, where the discretization in the new tesselator shows
bool test_arc(const QPolygonF &poly, bool winding)
{
QVector<XTrapezoid> traps;
qreal area1 = 0;
qreal area2 = 0;
old_tesselate_polygon(&traps, poly.data(), poly.size(), winding);
area1 = compute_area_for_x(traps);
traps.clear();
test_tesselate_polygon(&traps, poly.data(), poly.size(), winding);
area2 = compute_area_for_x(traps);
bool result = (area2 - area1 < .02);
if (!result && area1)
result = (qAbs(area1 - area2)/area1 < .02);
return result;
}
/*!
\fn void QPaintEngine::drawEllipse(const QRectF &rect)
Reimplement this function to draw the largest ellipse that can be
contained within rectangle \a rect.
The default implementation calls drawPolygon().
*/
void QPaintEngine::drawEllipse(const QRectF &rect)
{
QPainterPath path;
path.addEllipse(rect);
if (hasFeature(PainterPaths)) {
drawPath(path);
} else {
QPolygonF polygon = path.toFillPolygon();
drawPolygon(polygon.data(), polygon.size(), ConvexMode);
}
}
void QgsCoordinateTransform::transformPolygon( QPolygonF &poly, TransformDirection direction ) const
{
if ( !d->mIsValid || d->mShortCircuit )
{
return;
}
//create x, y arrays
int nVertices = poly.size();
QVector<double> x( nVertices );
QVector<double> y( nVertices );
QVector<double> z( nVertices );
double *destX = x.data();
double *destY = y.data();
double *destZ = z.data();
const QPointF *polyData = poly.constData();
for ( int i = 0; i < nVertices; ++i )
{
*destX++ = polyData->x();
*destY++ = polyData->y();
*destZ++ = 0;
polyData++;
}
try
{
transformCoords( nVertices, x.data(), y.data(), z.data(), direction );
}
catch ( const QgsCsException & )
{
// rethrow the exception
QgsDebugMsg( QStringLiteral( "rethrowing exception" ) );
throw;
}
QPointF *destPoint = poly.data();
const double *srcX = x.constData();
const double *srcY = y.constData();
for ( int i = 0; i < nVertices; ++i )
{
destPoint->rx() = *srcX++;
destPoint->ry() = *srcY++;
destPoint++;
}
}
QPolygonF bezier_fit_cubic_multi( const QPolygonF& data, double error,
unsigned max_beziers )
{
QPolygonF out(4*max_beziers);
const int retn = sp_bezier_fit_cubic_r(out.data(), data.data(),
data.count(), error,
max_beziers);
if( retn >= 0 )
{
// get rid of unused points
if( retn*4 < out.count() )
out.remove( retn*4, out.count()-retn*4 );
return out;
}
else
return QPolygonF();
}
/*!
Draw dots
\param painter Painter
\param xMap x map
\param yMap y map
\param canvasRect Contents rect of the canvas
\param from index of the first point to be painted
\param to index of the last point to be painted
\sa draw(), drawCurve(), drawSticks(), drawLines(), drawSteps()
*/
void QwtPlotCurve::drawDots( QPainter *painter,
const QwtScaleMap &xMap, const QwtScaleMap &yMap,
const QRectF &canvasRect, int from, int to ) const
{
const bool doFill = d_data->brush.style() != Qt::NoBrush;
const bool doAlign = QwtPainter::roundingAlignment( painter );
QPolygonF polyline;
if ( doFill )
polyline.resize( to - from + 1 );
QPointF *points = polyline.data();
for ( int i = from; i <= to; i++ )
{
const QPointF sample = d_series->sample( i );
double xi = xMap.transform( sample.x() );
double yi = yMap.transform( sample.y() );
if ( doAlign )
{
xi = qRound( xi );
yi = qRound( yi );
}
QwtPainter::drawPoint( painter, QPointF( xi, yi ) );
if ( doFill )
{
points[i - from].rx() = xi;
points[i - from].ry() = yi;
}
}
if ( doFill )
{
if ( d_data->paintAttributes & ClipPolygons )
polyline = QwtClipper::clipPolygonF( canvasRect, polyline );
fillCurve( painter, xMap, yMap, polyline );
}
}
static PyObject *meth_QPolygonF_data(PyObject *sipSelf, PyObject *sipArgs)
{
PyObject *sipParseErr = NULL;
{
QPolygonF *sipCpp;
if (sipParseArgs(&sipParseErr, sipArgs, "B", &sipSelf, sipType_QPolygonF, &sipCpp))
{
void*sipRes;
sipRes = sipCpp->data();
return sipConvertFromVoidPtr(sipRes);
}
}
/* Raise an exception if the arguments couldn't be parsed. */
sipNoMethod(sipParseErr, sipName_QPolygonF, sipName_data, doc_QPolygonF_data);
return NULL;
}
/*!
Draw a tube
Builds 2 curves from the upper and lower limits of the intervals
and draws them with the pen(). The area between the curves is
filled with the brush().
\param painter Painter
\param xMap Maps x-values into pixel coordinates.
\param yMap Maps y-values into pixel coordinates.
\param canvasRect Contents rect of the canvas
\param from Index of the first sample to be painted
\param to Index of the last sample to be painted. If to < 0 the
series will be painted to its last sample.
\sa drawSeries(), drawSymbols()
*/
void QwtPlotIntervalCurve::drawTube( QPainter *painter,
const QwtScaleMap &xMap, const QwtScaleMap &yMap,
const QRectF &canvasRect, int from, int to ) const
{
const bool doAlign = QwtPainter::roundingAlignment( painter );
painter->save();
const size_t size = to - from + 1;
QPolygonF polygon( 2 * size );
QPointF *points = polygon.data();
for ( uint i = 0; i < size; i++ )
{
QPointF &minValue = points[i];
QPointF &maxValue = points[2 * size - 1 - i];
const QwtIntervalSample intervalSample = sample( from + i );
if ( orientation() == Qt::Vertical )
{
double x = xMap.transform( intervalSample.value );
double y1 = yMap.transform( intervalSample.interval.minValue() );
double y2 = yMap.transform( intervalSample.interval.maxValue() );
if ( doAlign )
{
x = qRound( x );
y1 = qRound( y1 );
y2 = qRound( y2 );
}
minValue.rx() = x;
minValue.ry() = y1;
maxValue.rx() = x;
maxValue.ry() = y2;
}
else
{
double y = yMap.transform( intervalSample.value );
double x1 = xMap.transform( intervalSample.interval.minValue() );
double x2 = xMap.transform( intervalSample.interval.maxValue() );
if ( doAlign )
{
y = qRound( y );
x1 = qRound( x1 );
x2 = qRound( x2 );
}
minValue.rx() = x1;
minValue.ry() = y;
maxValue.rx() = x2;
maxValue.ry() = y;
}
}
if ( d_data->brush.style() != Qt::NoBrush )
{
painter->setPen( QPen( Qt::NoPen ) );
painter->setBrush( d_data->brush );
if ( d_data->paintAttributes & ClipPolygons )
{
const qreal m = 1.0;
const QPolygonF p = QwtClipper::clipPolygonF(
canvasRect.adjusted(-m, -m, m, m), polygon, true );
QwtPainter::drawPolygon( painter, p );
}
else
{
QwtPainter::drawPolygon( painter, polygon );
}
}
if ( d_data->pen.style() != Qt::NoPen )
{
painter->setPen( d_data->pen );
painter->setBrush( Qt::NoBrush );
if ( d_data->paintAttributes & ClipPolygons )
{
QPolygonF p;
p.resize( size );
qMemCopy( p.data(), points, size * sizeof( QPointF ) );
p = QwtClipper::clipPolygonF( canvasRect, p );
QwtPainter::drawPolyline( painter, p );
p.resize( size );
qMemCopy( p.data(), points + size, size * sizeof( QPointF ) );
p = QwtClipper::clipPolygonF( canvasRect, p );
QwtPainter::drawPolyline( painter, p );
}
else
{
QwtPainter::drawPolyline( painter, points, size );
QwtPainter::drawPolyline( painter, points + size, size );
}
}
painter->restore();
}
// draw the ALT/SLOPE curve
void AllPlotSlopeCurve::drawCurve( QPainter *painter, int,
const QwtScaleMap &xMap, const QwtScaleMap &yMap,
const QRectF &, int from, int to ) const
{
const QwtSeriesData<QPointF> *series = data();
// parameter (will move to data
// use sensible defaults
double section_delta = 0.1;
bool byDistance = true;
switch (d_data->style) {
// time-section is defined in minutes, distance-section in km
case SlopeTime1 : { section_delta = 1.0; byDistance = false; break; }
case SlopeTime2 : { section_delta = 5.0; byDistance = false; break; }
case SlopeTime3 : { section_delta = 10.0; byDistance = false; break; }
case SlopeDist1 : { section_delta = 0.1; byDistance = true; break; }
case SlopeDist2 : { section_delta = 0.5; byDistance = true; break; }
case SlopeDist3 : { section_delta = 1; byDistance = true; break; }
}
// create single polygons to be painted (in different colors depending on slope)
QList<QPolygonF*> polygons;
// store the polygon edge points (original coordinates) for slope/distance & m/time calculation
QList<QPointF> calcPoints;
// prepare Y-Axis baseline info for painting the polygon
double baseline = d_data->baseline;
if ( yMap.transformation() )
baseline = yMap.transformation()->bounded( baseline );
double refY = yMap.transform( baseline );
double sectionStart = 0.0;
QPolygonF *polygon;
QPointF *points = NULL;
for (int i = from; i <= to; i++ ) {
const QPointF sample = series->sample( i );
if (i == from) {
// first polygon
polygon = new QPolygonF (4);
points = polygon->data();
sectionStart = sample.x();
double xi = xMap.transform( sample.x() );
double yi = yMap.transform( sample.y() );
points[0].rx() = xi;
points[0].ry() = refY;
points[1].rx() = xi;
points[1].ry() = yi;
// first point for slope/mperh calcuation
QPointF calcPoint;
calcPoint.rx() = sample.x();
calcPoint.ry() = sample.y();
calcPoints.append(calcPoint);
};
// we are in a section - so search for the end and if found close polygon
if (points && sample.x() >= (sectionStart+section_delta)) {
// we are at the end - close and create polygon and go to next
double xi = xMap.transform( sample.x() );
double yi = yMap.transform( sample.y() );
points[2].rx() = xi;
points[2].ry() = yi;
points[3].rx() = xi;
points[3].ry() = refY;
// append to list
polygons.append(polygon);
// next point for slope/mperh calcuation
QPointF calcPoint;
calcPoint.rx() = sample.x();
calcPoint.ry() = sample.y();
calcPoints.append(calcPoint);
// start the next polygon with the SAME point than the previous one to have a step-free graph
polygon = new QPolygonF (4);
points = polygon->data();
sectionStart = sample.x();
double xi2 = xMap.transform( sample.x() );
double yi2 = yMap.transform( sample.y() );
points[0].rx() = xi2;
points[0].ry() = refY;
points[1].rx() = xi2;
points[1].ry() = yi2;
}
// last started polygon is not closed and painted by intent since it would be smaller than then the others
}
// paint the polygons & text per polygon
int i = 0;
foreach (QPolygonF *p, polygons) {
double slope=0.0f; // slope of a section (byDistance = true)
double mperh=0.0f; // meter per hour (climb or descent) (byDistance = false)
QPointF point1 = calcPoints.at(i);
QPointF point2 = calcPoints.at(i+1);
QBrush brush;
if (byDistance) {
// if Y-Axis did not change, no calculation
// distance - X-Axis is in KM, Y-Axis in m ! and at the end *100 to get %value
if (point2.ry() != point1.ry()) {
slope = 100 * ((point2.ry() - point1.ry()) / ((point2.rx() - point1.rx())*1000));
} else {
slope = 0.0;
}
// set the brush
if (slope >= 0 && slope < 5) brush = d_data->brushes[0];
if (slope >= 4 && slope < 7) brush = d_data->brushes[1];
if (slope >= 7 && slope < 10) brush = d_data->brushes[2];
if (slope >= 10 && slope < 15) brush = d_data->brushes[3];
if (slope >= 15) brush = d_data->brushes[4];
if (slope < 0 && slope > -2) brush = d_data->brushes[5];
if (slope <= -2 && slope > -5) brush = d_data->brushes[6];
if (slope <= -5 && slope > -9) brush = d_data->brushes[7];
if (slope <= -9 && slope > -15) brush = d_data->brushes[8];
if (slope <= -15) brush = d_data->brushes[5];
} else {
// if Y-Axis did not change, no calculation
// distance - X-Axis is in min, Y-Axis in m !
if (point2.ry() != point1.ry()) {
mperh = 60 * ((point2.ry() - point1.ry()) / (point2.rx() - point1.rx()));
} else {
mperh = 0.0;
}
// set the brush
if (mperh >= 0 && mperh < 100) brush = d_data->brushes[0];
if (mperh >= 100 && mperh < 200) brush = d_data->brushes[1];
if (mperh >= 200 && mperh < 300) brush = d_data->brushes[2];
if (mperh >= 300 && mperh < 500) brush = d_data->brushes[3];
if (mperh >= 500) brush = d_data->brushes[4];
if (mperh < 0 && mperh > -100) brush = d_data->brushes[5];
if (mperh <= -100 && mperh > -200) brush = d_data->brushes[6];
if (mperh <= -200 && mperh > -300) brush = d_data->brushes[7];
if (mperh <= -300 && mperh > -500) brush = d_data->brushes[8];
if (mperh <= -500) brush = d_data->brushes[5];
};
painter->setPen(QColor(127,127,127));
painter->setBrush( brush );
// paint the polygon
QwtPainter::drawPolygon( painter, *p );
// determine Y-Width of polygon / don't show text if too small
if (p->at(3).x() - p->at(0).x() > 25) {
// draw the text (find the point, draw the text)
QPointF pText = p->at(1);
if (p->at(1).y() >= p->at(2).y()) pText.setY(p->at(2).y()); else pText.setY(p->at(1).y());
pText.rx() +=5.0;
pText.ry() -=30.0;
QString text;
if (byDistance) {
text.setNum(slope, 'f', 2);
} else {
text.setNum(mperh, 'f', 0);
}
painter->setPen(GCColor::invertColor(GColor(CPLOTBACKGROUND)));
painter->setFont(QFont("Helvetica",8));
QwtPainter::drawText(painter, pText, text );
}
i++;
}
QgsConstWkbPtr QgsClipper::clippedLineWKB( QgsConstWkbPtr& wkbPtr, const QgsRectangle& clipExtent, QPolygonF& line )
{
QgsWKBTypes::Type wkbType = wkbPtr.readHeader();
int nPoints;
wkbPtr >> nPoints;
int skipZM = ( QgsWKBTypes::coordDimensions( wkbType ) - 2 ) * sizeof( double );
if ( static_cast<int>( nPoints * ( 2 * sizeof( double ) + skipZM ) ) > wkbPtr.remaining() )
{
QgsDebugMsg( QString( "%1 points exceed wkb length (%2>%3)" ).arg( nPoints ).arg( nPoints * ( 2 * sizeof( double ) + skipZM ) ).arg( wkbPtr.remaining() ) );
return QgsConstWkbPtr( nullptr, 0 );
}
double p0x, p0y, p1x = 0.0, p1y = 0.0; //original coordinates
double p1x_c, p1y_c; //clipped end coordinates
double lastClipX = 0.0, lastClipY = 0.0; //last successfully clipped coords
QPolygonF pts;
wkbPtr -= sizeof( unsigned int );
wkbPtr >> pts;
nPoints = pts.size();
line.clear();
line.reserve( nPoints + 1 );
QPointF *ptr = pts.data();
for ( int i = 0; i < nPoints; ++i, ++ptr )
{
if ( i == 0 )
{
p1x = ptr->rx();
p1y = ptr->ry();
continue;
}
else
{
p0x = p1x;
p0y = p1y;
p1x = ptr->rx();
p1y = ptr->ry();
p1x_c = p1x;
p1y_c = p1y;
if ( clipLineSegment( clipExtent.xMinimum(), clipExtent.xMaximum(), clipExtent.yMinimum(), clipExtent.yMaximum(),
p0x, p0y, p1x_c, p1y_c ) )
{
bool newLine = !line.isEmpty() && ( !qgsDoubleNear( p0x, lastClipX ) || !qgsDoubleNear( p0y, lastClipY ) );
if ( newLine )
{
//add edge points to connect old and new line
connectSeparatedLines( lastClipX, lastClipY, p0x, p0y, clipExtent, line );
}
if ( line.size() < 1 || newLine )
{
//add first point
line << QPointF( p0x, p0y );
}
//add second point
lastClipX = p1x_c;
lastClipY = p1y_c;
line << QPointF( p1x_c, p1y_c );
}
}
}
return wkbPtr;
}
/*!
\param points Series of data points
\return Curve points
*/
QPolygonF QwtWeedingCurveFitter::fitCurve( const QPolygonF &points ) const
{
QStack<Line> stack;
stack.reserve( 500 );
const QPointF *p = points.data();
const int nPoints = points.size();
QVector<bool> usePoint( nPoints, false );
double distToSegment;
stack.push( Line( 0, nPoints - 1 ) );
while ( !stack.isEmpty() )
{
const Line r = stack.pop();
// initialize line segment
const double vecX = p[r.to].x() - p[r.from].x();
const double vecY = p[r.to].y() - p[r.from].y();
const double vecLength = qSqrt( vecX * vecX + vecY * vecY );
const double unitVecX = ( vecLength != 0.0 ) ? vecX / vecLength : 0.0;
const double unitVecY = ( vecLength != 0.0 ) ? vecY / vecLength : 0.0;
double maxDist = 0.0;
int nVertexIndexMaxDistance = r.from + 1;
for ( int i = r.from + 1; i < r.to; i++ )
{
//compare to anchor
const double fromVecX = p[i].x() - p[r.from].x();
const double fromVecY = p[i].y() - p[r.from].y();
const double fromVecLength =
qSqrt( fromVecX * fromVecX + fromVecY * fromVecY );
if ( fromVecX * unitVecX + fromVecY * unitVecY < 0.0 )
{
distToSegment = fromVecLength;
}
if ( fromVecX * unitVecX + fromVecY * unitVecY < 0.0 )
{
distToSegment = fromVecLength;
}
else
{
const double toVecX = p[i].x() - p[r.to].x();
const double toVecY = p[i].y() - p[r.to].y();
const double toVecLength = qSqrt( toVecX * toVecX + toVecY * toVecY );
const double s = toVecX * ( -unitVecX ) + toVecY * ( -unitVecY );
if ( s < 0.0 )
distToSegment = toVecLength;
else
{
distToSegment = qSqrt( qFabs( toVecLength * toVecLength - s * s ) );
}
}
if ( maxDist < distToSegment )
{
maxDist = distToSegment;
nVertexIndexMaxDistance = i;
}
}
if ( maxDist <= d_data->tolerance )
{
usePoint[r.from] = true;
usePoint[r.to] = true;
}
else
{
stack.push( Line( r.from, nVertexIndexMaxDistance ) );
stack.push( Line( nVertexIndexMaxDistance, r.to ) );
}
}
int cnt = 0;
QPolygonF stripped( nPoints );
for ( int i = 0; i < nPoints; i++ )
{
if ( usePoint[i] )
stripped[cnt++] = p[i];
}
stripped.resize( cnt );
return stripped;
}
/*!
Draw lines
\param painter Painter
\param azimuthMap Maps azimuth values to values related to 0.0, M_2PI
\param radialMap Maps radius values into painter coordinates.
\param pole Position of the pole in painter coordinates
\param from index of the first point to be painted
\param to index of the last point to be painted.
\sa draw(), drawLines(), setCurveFitter()
*/
void QwtPolarCurve::drawLines( QPainter *painter,
const QwtScaleMap &azimuthMap, const QwtScaleMap &radialMap,
const QPointF &pole, int from, int to ) const
{
int size = to - from + 1;
if ( size <= 0 )
return;
QPolygonF polyline;
if ( d_data->curveFitter )
{
QPolygonF points( size );
for ( int j = from; j <= to; j++ )
{
const QwtPointPolar point = sample( j );
points[j - from] = QPointF( point.azimuth(), point.radius() );
}
points = d_data->curveFitter->fitCurve( points );
polyline.resize( points.size() );
QPointF *polylineData = polyline.data();
QPointF *pointsData = points.data();
for ( int i = 0; i < points.size(); i++ )
{
const QwtPointPolar point( pointsData[i].x(), pointsData[i].y() );
double r = radialMap.transform( point.radius() );
const double a = azimuthMap.transform( point.azimuth() );
polylineData[i] = qwtPolar2Pos( pole, r, a );
}
}
else
{
polyline.resize( size );
QPointF *polylineData = polyline.data();
for ( int i = from; i <= to; i++ )
{
QwtPointPolar point = sample( i );
if ( !qwtInsidePole( radialMap, point.radius() ) )
{
double r = radialMap.transform( point.radius() );
const double a = azimuthMap.transform( point.azimuth() );
polylineData[i - from] = qwtPolar2Pos( pole, r, a );
}
else
{
polylineData[i - from] = pole;
}
}
}
QRectF clipRect;
if ( painter->hasClipping() )
clipRect = painter->clipRegion().boundingRect();
else
{
clipRect = painter->window();
if ( !clipRect.isEmpty() )
clipRect = painter->transform().inverted().mapRect( clipRect );
}
if ( !clipRect.isEmpty() )
{
double off = qCeil( qMax( 1.0, painter->pen().widthF() ) );
clipRect = clipRect.toRect().adjusted( -off, -off, off, off );
polyline = QwtClipper::clipPolygonF( clipRect, polyline );
}
QwtPainter::drawPolyline( painter, polyline );
painter->drawPolyline( polyline );
}