int QgsGeometrySnapperSingleSource::run( const QgsFeatureSource &source, QgsFeatureSink &sink, double thresh, QgsFeedback *feedback )
{
// the logic here comes from GRASS implementation of Vect_snap_lines_list()
int count = 0;
int totalCount = source.featureCount() * 2;
// step 1: record all point locations in a spatial index + extra data structure to keep
// reference to which other point they have been snapped to (in the next phase).
QgsSpatialIndex index;
QVector<AnchorPoint> pnts;
QgsFeatureRequest request;
request.setSubsetOfAttributes( QgsAttributeList() );
QgsFeatureIterator fi = source.getFeatures( request );
buildSnapIndex( fi, index, pnts, feedback, count, totalCount );
if ( feedback->isCanceled() )
return 0;
// step 2: go through all registered points and if not yet marked mark it as anchor and
// assign this anchor to all not yet marked points in threshold
assignAnchors( index, pnts, thresh );
// step 3: alignment of vertices and segments to the anchors
// Go through all lines and:
// 1) for all vertices: if not anchor snap it to its anchor
// 2) for all segments: snap it to all anchors in threshold (except anchors of vertices of course)
int modified = 0;
QgsFeature f;
fi = source.getFeatures();
while ( fi.nextFeature( f ) )
{
if ( feedback->isCanceled() )
break;
QgsGeometry geom = f.geometry();
if ( snapGeometry( geom.get(), index, pnts, thresh ) )
{
f.setGeometry( geom );
++modified;
}
sink.addFeature( f, QgsFeatureSink::FastInsert );
++count;
feedback->setProgress( 100. * count / totalCount );
}
return modified;
}
void QgsOverlayUtils::difference( const QgsFeatureSource &sourceA, const QgsFeatureSource &sourceB, QgsFeatureSink &sink, QgsProcessingContext &context, QgsProcessingFeedback *feedback, int &count, int totalCount, QgsOverlayUtils::DifferenceOutput outputAttrs )
{
QgsFeatureRequest requestB;
requestB.setSubsetOfAttributes( QgsAttributeList() );
if ( outputAttrs != OutputBA )
requestB.setDestinationCrs( sourceA.sourceCrs(), context.transformContext() );
QgsSpatialIndex indexB( sourceB.getFeatures( requestB ), feedback );
int fieldsCountA = sourceA.fields().count();
int fieldsCountB = sourceB.fields().count();
QgsAttributes attrs;
attrs.resize( outputAttrs == OutputA ? fieldsCountA : ( fieldsCountA + fieldsCountB ) );
if ( totalCount == 0 )
totalCount = 1; // avoid division by zero
QgsFeature featA;
QgsFeatureRequest requestA;
if ( outputAttrs == OutputBA )
requestA.setDestinationCrs( sourceB.sourceCrs(), context.transformContext() );
QgsFeatureIterator fitA = sourceA.getFeatures( requestA );
while ( fitA.nextFeature( featA ) )
{
if ( feedback->isCanceled() )
break;
if ( featA.hasGeometry() )
{
QgsGeometry geom( featA.geometry() );
QgsFeatureIds intersects = indexB.intersects( geom.boundingBox() ).toSet();
QgsFeatureRequest request;
request.setFilterFids( intersects );
request.setSubsetOfAttributes( QgsAttributeList() );
if ( outputAttrs != OutputBA )
request.setDestinationCrs( sourceA.sourceCrs(), context.transformContext() );
std::unique_ptr< QgsGeometryEngine > engine;
if ( !intersects.isEmpty() )
{
// use prepared geometries for faster intersection tests
engine.reset( QgsGeometry::createGeometryEngine( geom.constGet() ) );
engine->prepareGeometry();
}
QVector<QgsGeometry> geometriesB;
QgsFeature featB;
QgsFeatureIterator fitB = sourceB.getFeatures( request );
while ( fitB.nextFeature( featB ) )
{
if ( feedback->isCanceled() )
break;
if ( engine->intersects( featB.geometry().constGet() ) )
geometriesB << featB.geometry();
}
if ( !geometriesB.isEmpty() )
{
QgsGeometry geomB = QgsGeometry::unaryUnion( geometriesB );
geom = geom.difference( geomB );
}
if ( !sanitizeDifferenceResult( geom ) )
continue;
const QgsAttributes attrsA( featA.attributes() );
switch ( outputAttrs )
{
case OutputA:
attrs = attrsA;
break;
case OutputAB:
for ( int i = 0; i < fieldsCountA; ++i )
attrs[i] = attrsA[i];
break;
case OutputBA:
for ( int i = 0; i < fieldsCountA; ++i )
attrs[i + fieldsCountB] = attrsA[i];
break;
}
QgsFeature outFeat;
outFeat.setGeometry( geom );
outFeat.setAttributes( attrs );
sink.addFeature( outFeat, QgsFeatureSink::FastInsert );
}
else
{
// TODO: should we write out features that do not have geometry?
sink.addFeature( featA, QgsFeatureSink::FastInsert );
}
++count;
feedback->setProgress( count / ( double ) totalCount * 100. );
}
}
void QgsOverlayUtils::resolveOverlaps( const QgsFeatureSource &source, QgsFeatureSink &sink, QgsProcessingFeedback *feedback )
{
int count = 0;
int totalCount = source.featureCount();
if ( totalCount == 0 )
return; // nothing to do here
QgsFeatureId newFid = -1;
QgsWkbTypes::GeometryType geometryType = QgsWkbTypes::geometryType( QgsWkbTypes::multiType( source.wkbType() ) );
QgsFeatureRequest requestOnlyGeoms;
requestOnlyGeoms.setSubsetOfAttributes( QgsAttributeList() );
QgsFeatureRequest requestOnlyAttrs;
requestOnlyAttrs.setFlags( QgsFeatureRequest::NoGeometry );
QgsFeatureRequest requestOnlyIds;
requestOnlyIds.setFlags( QgsFeatureRequest::NoGeometry );
requestOnlyIds.setSubsetOfAttributes( QgsAttributeList() );
// make a set of used feature IDs so that we do not try to reuse them for newly added features
QgsFeature f;
QSet<QgsFeatureId> fids;
QgsFeatureIterator it = source.getFeatures( requestOnlyIds );
while ( it.nextFeature( f ) )
{
if ( feedback->isCanceled() )
return;
fids.insert( f.id() );
}
QHash<QgsFeatureId, QgsGeometry> geometries;
QgsSpatialIndex index;
QHash<QgsFeatureId, QList<QgsFeatureId> > intersectingIds; // which features overlap a particular area
// resolve intersections
it = source.getFeatures( requestOnlyGeoms );
while ( it.nextFeature( f ) )
{
if ( feedback->isCanceled() )
return;
QgsFeatureId fid1 = f.id();
QgsGeometry g1 = f.geometry();
std::unique_ptr< QgsGeometryEngine > g1engine;
geometries.insert( fid1, g1 );
index.insertFeature( f );
QgsRectangle bbox( f.geometry().boundingBox() );
const QList<QgsFeatureId> ids = index.intersects( bbox );
for ( QgsFeatureId fid2 : ids )
{
if ( fid1 == fid2 )
continue;
if ( !g1engine )
{
// use prepared geometries for faster intersection tests
g1engine.reset( QgsGeometry::createGeometryEngine( g1.constGet() ) );
g1engine->prepareGeometry();
}
QgsGeometry g2 = geometries.value( fid2 );
if ( !g1engine->intersects( g2.constGet() ) )
continue;
QgsGeometry geomIntersection = g1.intersection( g2 );
if ( !sanitizeIntersectionResult( geomIntersection, geometryType ) )
continue;
//
// add intersection geometry
//
// figure out new fid
while ( fids.contains( newFid ) )
--newFid;
fids.insert( newFid );
geometries.insert( newFid, geomIntersection );
QgsFeature fx( newFid );
fx.setGeometry( geomIntersection );
index.insertFeature( fx );
// figure out which feature IDs belong to this intersection. Some of the IDs can be of the newly
// created geometries - in such case we need to retrieve original IDs
QList<QgsFeatureId> lst;
if ( intersectingIds.contains( fid1 ) )
lst << intersectingIds.value( fid1 );
else
lst << fid1;
if ( intersectingIds.contains( fid2 ) )
lst << intersectingIds.value( fid2 );
else
lst << fid2;
intersectingIds.insert( newFid, lst );
//
// update f1
//
QgsGeometry g12 = g1.difference( g2 );
index.deleteFeature( f );
geometries.remove( fid1 );
if ( sanitizeDifferenceResult( g12 ) )
{
geometries.insert( fid1, g12 );
QgsFeature f1x( fid1 );
f1x.setGeometry( g12 );
index.insertFeature( f1x );
}
//
// update f2
//
QgsGeometry g21 = g2.difference( g1 );
QgsFeature f2old( fid2 );
f2old.setGeometry( g2 );
index.deleteFeature( f2old );
geometries.remove( fid2 );
if ( sanitizeDifferenceResult( g21 ) )
{
geometries.insert( fid2, g21 );
QgsFeature f2x( fid2 );
f2x.setGeometry( g21 );
index.insertFeature( f2x );
}
// update our temporary copy of the geometry to what is left from it
g1 = g12;
g1engine.reset();
}
++count;
feedback->setProgress( count / ( double ) totalCount * 100. );
}
// release some memory of structures we don't need anymore
fids.clear();
index = QgsSpatialIndex();
// load attributes
QHash<QgsFeatureId, QgsAttributes> attributesHash;
it = source.getFeatures( requestOnlyAttrs );
while ( it.nextFeature( f ) )
{
if ( feedback->isCanceled() )
return;
attributesHash.insert( f.id(), f.attributes() );
}
// store stuff in the sink
for ( auto i = geometries.constBegin(); i != geometries.constEnd(); ++i )
{
if ( feedback->isCanceled() )
return;
QgsFeature outFeature( i.key() );
outFeature.setGeometry( i.value() );
if ( intersectingIds.contains( i.key() ) )
{
const QList<QgsFeatureId> ids = intersectingIds.value( i.key() );
for ( QgsFeatureId id : ids )
{
outFeature.setAttributes( attributesHash.value( id ) );
sink.addFeature( outFeature, QgsFeatureSink::FastInsert );
}
}
else
{
outFeature.setAttributes( attributesHash.value( i.key() ) );
sink.addFeature( outFeature, QgsFeatureSink::FastInsert );
}
}
}
void QgsOverlayUtils::intersection( const QgsFeatureSource &sourceA, const QgsFeatureSource &sourceB, QgsFeatureSink &sink, QgsProcessingContext &context, QgsProcessingFeedback *feedback, int &count, int totalCount, const QList<int> &fieldIndicesA, const QList<int> &fieldIndicesB )
{
QgsWkbTypes::GeometryType geometryType = QgsWkbTypes::geometryType( QgsWkbTypes::multiType( sourceA.wkbType() ) );
int attrCount = fieldIndicesA.count() + fieldIndicesB.count();
QgsFeatureRequest request;
request.setSubsetOfAttributes( QgsAttributeList() );
request.setDestinationCrs( sourceA.sourceCrs(), context.transformContext() );
QgsFeature outFeat;
QgsSpatialIndex indexB( sourceB.getFeatures( request ), feedback );
if ( totalCount == 0 )
totalCount = 1; // avoid division by zero
QgsFeature featA;
QgsFeatureIterator fitA = sourceA.getFeatures( QgsFeatureRequest().setSubsetOfAttributes( fieldIndicesA ) );
while ( fitA.nextFeature( featA ) )
{
if ( feedback->isCanceled() )
break;
if ( !featA.hasGeometry() )
continue;
QgsGeometry geom( featA.geometry() );
QgsFeatureIds intersects = indexB.intersects( geom.boundingBox() ).toSet();
QgsFeatureRequest request;
request.setFilterFids( intersects );
request.setDestinationCrs( sourceA.sourceCrs(), context.transformContext() );
request.setSubsetOfAttributes( fieldIndicesB );
std::unique_ptr< QgsGeometryEngine > engine;
if ( !intersects.isEmpty() )
{
// use prepared geometries for faster intersection tests
engine.reset( QgsGeometry::createGeometryEngine( geom.constGet() ) );
engine->prepareGeometry();
}
QgsAttributes outAttributes( attrCount );
const QgsAttributes attrsA( featA.attributes() );
for ( int i = 0; i < fieldIndicesA.count(); ++i )
outAttributes[i] = attrsA[fieldIndicesA[i]];
QgsFeature featB;
QgsFeatureIterator fitB = sourceB.getFeatures( request );
while ( fitB.nextFeature( featB ) )
{
if ( feedback->isCanceled() )
break;
QgsGeometry tmpGeom( featB.geometry() );
if ( !engine->intersects( tmpGeom.constGet() ) )
continue;
QgsGeometry intGeom = geom.intersection( tmpGeom );
if ( !sanitizeIntersectionResult( intGeom, geometryType ) )
continue;
const QgsAttributes attrsB( featB.attributes() );
for ( int i = 0; i < fieldIndicesB.count(); ++i )
outAttributes[fieldIndicesA.count() + i] = attrsB[fieldIndicesB[i]];
outFeat.setGeometry( intGeom );
outFeat.setAttributes( outAttributes );
sink.addFeature( outFeat, QgsFeatureSink::FastInsert );
}
++count;
feedback->setProgress( count / ( double ) totalCount * 100. );
}
}
QgsSpatialIndex::QgsSpatialIndex( const QgsFeatureSource &source, QgsFeedback *feedback )
{
d = new QgsSpatialIndexData( source.getFeatures( QgsFeatureRequest().setNoAttributes() ), feedback );
}
bool QgsProcessingAlgorithm::validateInputCrs( const QVariantMap ¶meters, QgsProcessingContext &context ) const
{
if ( !( flags() & FlagRequiresMatchingCrs ) )
{
// I'm a well behaved algorithm - I take work AWAY from users!
return true;
}
bool foundCrs = false;
QgsCoordinateReferenceSystem crs;
Q_FOREACH ( const QgsProcessingParameterDefinition *def, mParameters )
{
if ( def->type() == QStringLiteral( "layer" ) || def->type() == QStringLiteral( "raster" ) )
{
QgsMapLayer *layer = QgsProcessingParameters::parameterAsLayer( def, parameters, context );
if ( layer )
{
if ( foundCrs && layer->crs().isValid() && crs != layer->crs() )
{
return false;
}
else if ( !foundCrs && layer->crs().isValid() )
{
foundCrs = true;
crs = layer->crs();
}
}
}
else if ( def->type() == QStringLiteral( "source" ) )
{
QgsFeatureSource *source = QgsProcessingParameters::parameterAsSource( def, parameters, context );
if ( source )
{
if ( foundCrs && source->sourceCrs().isValid() && crs != source->sourceCrs() )
{
return false;
}
else if ( !foundCrs && source->sourceCrs().isValid() )
{
foundCrs = true;
crs = source->sourceCrs();
}
}
}
else if ( def->type() == QStringLiteral( "multilayer" ) )
{
QList< QgsMapLayer *> layers = QgsProcessingParameters::parameterAsLayerList( def, parameters, context );
Q_FOREACH ( QgsMapLayer *layer, layers )
{
if ( !layer )
continue;
if ( foundCrs && layer->crs().isValid() && crs != layer->crs() )
{
return false;
}
else if ( !foundCrs && layer->crs().isValid() )
{
foundCrs = true;
crs = layer->crs();
}
}
}
}
