void HoverVehicle::updateDustTrail( F32 dt )
{
// Check to see if we're moving.
VectorF velocityVector = getVelocity();
F32 velocity = velocityVector.len();
if( velocity > 2.0 )
{
velocityVector.normalize();
emitDust( mDustTrailEmitter, mDataBlock->triggerTrailHeight, mDataBlock->dustTrailOffset,
( U32 )( dt * 1000 * ( velocity / mDataBlock->dustTrailFreqMod ) ),
velocityVector );
}
}
bool Trigger::testObject(GameBase* enter)
{
if (mTriggerPolyhedron.pointList.size() == 0)
return false;
mClippedList.clear();
SphereF sphere;
sphere.center = (mWorldBox.minExtents + mWorldBox.maxExtents) * 0.5;
VectorF bv = mWorldBox.maxExtents - sphere.center;
sphere.radius = bv.len();
enter->buildPolyList(PLC_Collision, &mClippedList, mWorldBox, sphere);
return mClippedList.isEmpty() == false;
}
void GFXDrawUtil::drawCylinder( const GFXStateBlockDesc &desc, const Point3F &basePnt, const Point3F &tipPnt, F32 radius, const ColorI &color )
{
VectorF uvec = tipPnt - basePnt;
F32 height = uvec.len();
uvec.normalize();
MatrixF mat( true );
MathUtils::getMatrixFromUpVector( uvec, &mat );
mat.setPosition(basePnt);
Point3F scale( radius, radius, height * 2 );
mat.scale(scale);
GFXTransformSaver saver;
mDevice->pushWorldMatrix();
mDevice->multWorld(mat);
S32 numPoints = sizeof(circlePoints)/sizeof(Point2F);
GFXVertexBufferHandle<GFXVertexPC> verts(mDevice, numPoints * 4 + 4, GFXBufferTypeVolatile);
verts.lock();
for (S32 i=0; i<numPoints + 1; i++)
{
S32 imod = i % numPoints;
verts[i].point = Point3F(circlePoints[imod].x,circlePoints[imod].y, 0.5f);
verts[i].color = color;
verts[i + numPoints + 1].point = Point3F(circlePoints[imod].x,circlePoints[imod].y, 0);
verts[i + numPoints + 1].color = color;
verts[2*numPoints + 2 + 2 * i].point = Point3F(circlePoints[imod].x,circlePoints[imod].y, 0.5f);
verts[2*numPoints + 2 + 2 * i].color = color;
verts[2*numPoints + 2 + 2 * i + 1].point = Point3F(circlePoints[imod].x,circlePoints[imod].y, 0);
verts[2*numPoints + 2 + 2 * i + 1].color = color;
}
verts.unlock();
mDevice->setStateBlockByDesc( desc );
mDevice->setVertexBuffer( verts );
mDevice->setupGenericShaders( GFXDevice::GSModColorTexture );
mDevice->drawPrimitive( GFXTriangleFan, 0, numPoints );
mDevice->drawPrimitive( GFXTriangleFan, numPoints + 1, numPoints );
mDevice->drawPrimitive( GFXTriangleStrip, 2 * numPoints + 2, 2 * numPoints);
mDevice->popWorldMatrix();
}
void PxSingleActor::onCollision( GameBase *hitObject, const VectorF &impactForce )
{
if ( isGhost() )
return;
PROFILE_SCOPE( PxSingleActor_OnCollision );
// TODO: Why do we not get a hit position?
Point3F hitPos = getPosition();
String strHitPos = String::ToString( "%g %g %g", hitPos.x, hitPos.y, hitPos.z );
String strImpactVec = String::ToString( "%g %g %g", impactForce.x, impactForce.y, impactForce.z );
String strImpactForce = String::ToString( "%g", impactForce.len() );
Con::executef( mDataBlock, "onCollision", scriptThis(),
hitObject ? hitObject->scriptThis() : NULL,
strHitPos.c_str(), strImpactVec.c_str(), strImpactForce.c_str() );
}
void DecalRoad::_captureVerts()
{
PROFILE_SCOPE( DecalRoad_captureVerts );
//Con::warnf( "%s - captureVerts", isServerObject() ? "server" : "client" );
if ( isServerObject() )
{
//Con::errorf( "DecalRoad::_captureVerts - called on the server side!" );
return;
}
if ( mEdges.size() == 0 )
return;
//
// Construct ClippedPolyList objects for each pair
// of roadEdges.
// Use them to capture Terrain verts.
//
SphereF sphere;
RoadEdge *edge = NULL;
RoadEdge *nextEdge = NULL;
mTriangleCount = 0;
mVertCount = 0;
Vector<ClippedPolyList> clipperList;
for ( U32 i = 0; i < mEdges.size() - 1; i++ )
{
Box3F box;
edge = &mEdges[i];
nextEdge = &mEdges[i+1];
box.minExtents = edge->p1;
box.maxExtents = edge->p1;
box.extend( edge->p0 );
box.extend( edge->p2 );
box.extend( nextEdge->p0 );
box.extend( nextEdge->p1 );
box.extend( nextEdge->p2 );
box.minExtents.z -= 5.0f;
box.maxExtents.z += 5.0f;
sphere.center = ( nextEdge->p1 + edge->p1 ) * 0.5f;
sphere.radius = 100.0f; // NOTE: no idea how to calculate this
ClippedPolyList clipper;
clipper.mNormal.set(0.0f, 0.0f, 0.0f);
VectorF n;
PlaneF plane0, plane1;
// Construct Back Plane
n = edge->p2 - edge->p0;
n.normalize();
n = mCross( n, edge->uvec );
plane0.set( edge->p0, n );
clipper.mPlaneList.push_back( plane0 );
// Construct Front Plane
n = nextEdge->p2 - nextEdge->p0;
n.normalize();
n = -mCross( edge->uvec, n );
plane1.set( nextEdge->p0, -n );
//clipper.mPlaneList.push_back( plane1 );
// Test if / where the planes intersect.
bool discardLeft = false;
bool discardRight = false;
Point3F iPos;
VectorF iDir;
if ( plane0.intersect( plane1, iPos, iDir ) )
{
Point2F iPos2F( iPos.x, iPos.y );
Point2F cPos2F( edge->p1.x, edge->p1.y );
Point2F rVec2F( edge->rvec.x, edge->rvec.y );
Point2F iVec2F = iPos2F - cPos2F;
F32 iLen = iVec2F.len();
iVec2F.normalize();
if ( iLen < edge->width * 0.5f )
{
F32 dot = mDot( rVec2F, iVec2F );
// The clipping planes intersected on the right side,
// discard the right side clipping plane.
if ( dot > 0.0f )
discardRight = true;
// The clipping planes intersected on the left side,
// discard the left side clipping plane.
else
discardLeft = true;
}
}
// Left Plane
if ( !discardLeft )
{
n = ( nextEdge->p0 - edge->p0 );
n.normalize();
n = mCross( edge->uvec, n );
clipper.mPlaneList.push_back( PlaneF(edge->p0, n) );
}
else
{
nextEdge->p0 = edge->p0;
}
// Right Plane
if ( !discardRight )
{
n = ( nextEdge->p2 - edge->p2 );
n.normalize();
n = -mCross( n, edge->uvec );
clipper.mPlaneList.push_back( PlaneF(edge->p2, -n) );
}
else
{
nextEdge->p2 = edge->p2;
}
n = nextEdge->p2 - nextEdge->p0;
n.normalize();
n = -mCross( edge->uvec, n );
plane1.set( nextEdge->p0, -n );
clipper.mPlaneList.push_back( plane1 );
// We have constructed the clipping planes,
// now grab/clip the terrain geometry
getContainer()->buildPolyList( PLC_Decal, box, TerrainObjectType, &clipper );
clipper.cullUnusedVerts();
clipper.triangulate();
clipper.generateNormals();
// If we got something, add it to the ClippedPolyList Vector
if ( !clipper.isEmpty() && !( smDiscardAll && ( discardRight || discardLeft ) ) )
{
clipperList.push_back( clipper );
mVertCount += clipper.mVertexList.size();
mTriangleCount += clipper.mPolyList.size();
}
}
//
// Set the roadEdge height to be flush with terrain
// This is not really necessary but makes the debug spline rendering better.
//
for ( U32 i = 0; i < mEdges.size() - 1; i++ )
{
edge = &mEdges[i];
_getTerrainHeight( edge->p0.x, edge->p0.y, edge->p0.z );
_getTerrainHeight( edge->p2.x, edge->p2.y, edge->p2.z );
}
//
// Allocate the RoadBatch(s)
//
// If we captured no verts, then we can return here without
// allocating any RoadBatches or the Vert/Index Buffers.
// PreprenderImage will not allocate a render instance while
// mBatches.size() is zero.
U32 numClippers = clipperList.size();
if ( numClippers == 0 )
return;
mBatches.clear();
// Allocate the VertexBuffer and PrimitiveBuffer
mVB.set( GFX, mVertCount, GFXBufferTypeStatic );
mPB.set( GFX, mTriangleCount * 3, 0, GFXBufferTypeStatic );
// Lock the VertexBuffer
GFXVertexPNTBT *vertPtr = mVB.lock();
if(!vertPtr) return;
U32 vertIdx = 0;
//
// Fill the VertexBuffer and vertex data for the RoadBatches
// Loop through the ClippedPolyList Vector
//
RoadBatch *batch = NULL;
F32 texStart = 0.0f;
F32 texEnd;
for ( U32 i = 0; i < clipperList.size(); i++ )
{
ClippedPolyList *clipper = &clipperList[i];
RoadEdge &edge = mEdges[i];
RoadEdge &nextEdge = mEdges[i+1];
VectorF segFvec = nextEdge.p1 - edge.p1;
F32 segLen = segFvec.len();
segFvec.normalize();
F32 texLen = segLen / mTextureLength;
texEnd = texStart + texLen;
BiQuadToSqr quadToSquare( Point2F( edge.p0.x, edge.p0.y ),
Point2F( edge.p2.x, edge.p2.y ),
Point2F( nextEdge.p2.x, nextEdge.p2.y ),
Point2F( nextEdge.p0.x, nextEdge.p0.y ) );
//
if ( i % mSegmentsPerBatch == 0 )
{
mBatches.increment();
batch = &mBatches.last();
batch->bounds.minExtents = clipper->mVertexList[0].point;
batch->bounds.maxExtents = clipper->mVertexList[0].point;
batch->startVert = vertIdx;
}
// Loop through each ClippedPolyList
for ( U32 j = 0; j < clipper->mVertexList.size(); j++ )
{
// Add each vert to the VertexBuffer
Point3F pos = clipper->mVertexList[j].point;
vertPtr[vertIdx].point = pos;
vertPtr[vertIdx].normal = clipper->mNormalList[j];
Point2F uv = quadToSquare.transform( Point2F(pos.x,pos.y) );
vertPtr[vertIdx].texCoord.x = uv.x;
vertPtr[vertIdx].texCoord.y = -(( texEnd - texStart ) * uv.y + texStart);
vertPtr[vertIdx].tangent = mCross( segFvec, clipper->mNormalList[j] );
vertPtr[vertIdx].binormal = segFvec;
vertIdx++;
// Expand the RoadBatch bounds to contain this vertex
batch->bounds.extend( pos );
}
batch->endVert = vertIdx - 1;
texStart = texEnd;
}
// Unlock the VertexBuffer, we are done filling it.
mVB.unlock();
// Lock the PrimitiveBuffer
U16 *idxBuff;
mPB.lock(&idxBuff);
U32 curIdx = 0;
U16 vertOffset = 0;
batch = NULL;
S32 batchIdx = -1;
// Fill the PrimitiveBuffer
// Loop through each ClippedPolyList in the Vector
for ( U32 i = 0; i < clipperList.size(); i++ )
{
ClippedPolyList *clipper = &clipperList[i];
if ( i % mSegmentsPerBatch == 0 )
{
batchIdx++;
batch = &mBatches[batchIdx];
batch->startIndex = curIdx;
}
for ( U32 j = 0; j < clipper->mPolyList.size(); j++ )
{
// Write indices for each Poly
ClippedPolyList::Poly *poly = &clipper->mPolyList[j];
AssertFatal( poly->vertexCount == 3, "Got non-triangle poly!" );
idxBuff[curIdx] = clipper->mIndexList[poly->vertexStart] + vertOffset;
curIdx++;
idxBuff[curIdx] = clipper->mIndexList[poly->vertexStart + 1] + vertOffset;
curIdx++;
idxBuff[curIdx] = clipper->mIndexList[poly->vertexStart + 2] + vertOffset;
curIdx++;
}
batch->endIndex = curIdx - 1;
vertOffset += clipper->mVertexList.size();
}
// Unlock the PrimitiveBuffer, we are done filling it.
mPB.unlock();
// Generate the object/world bounds
// Is the union of all batch bounding boxes.
Box3F box;
for ( U32 i = 0; i < mBatches.size(); i++ )
{
const RoadBatch &batch = mBatches[i];
if ( i == 0 )
box = batch.bounds;
else
box.intersect( batch.bounds );
}
Point3F pos = getPosition();
mWorldBox = box;
resetObjectBox();
// Make sure we are in the correct bins given our world box.
if( getSceneManager() != NULL )
getSceneManager()->notifyObjectDirty( this );
}
void Item::updatePos(const U32 /*mask*/, const F32 dt)
{
// Try and move
Point3F pos;
mObjToWorld.getColumn(3,&pos);
delta.posVec = pos;
bool contact = false;
bool nonStatic = false;
bool stickyNotify = false;
CollisionList collisionList;
F32 time = dt;
static Polyhedron sBoxPolyhedron;
static ExtrudedPolyList sExtrudedPolyList;
static EarlyOutPolyList sEarlyOutPolyList;
MatrixF collisionMatrix(true);
Point3F end = pos + mVelocity * time;
U32 mask = isServerObject() ? sServerCollisionMask : sClientCollisionMask;
// Part of our speed problem here is that we don't track contact surfaces, like we do
// with the player. In order to handle the most common and performance impacting
// instance of this problem, we'll use a ray cast to detect any contact surfaces below
// us. This won't be perfect, but it only needs to catch a few of these to make a
// big difference. We'll cast from the top center of the bounding box at the tick's
// beginning to the bottom center of the box at the end.
Point3F startCast((mObjBox.minExtents.x + mObjBox.maxExtents.x) * 0.5,
(mObjBox.minExtents.y + mObjBox.maxExtents.y) * 0.5,
mObjBox.maxExtents.z);
Point3F endCast((mObjBox.minExtents.x + mObjBox.maxExtents.x) * 0.5,
(mObjBox.minExtents.y + mObjBox.maxExtents.y) * 0.5,
mObjBox.minExtents.z);
collisionMatrix.setColumn(3, pos);
collisionMatrix.mulP(startCast);
collisionMatrix.setColumn(3, end);
collisionMatrix.mulP(endCast);
RayInfo rinfo;
bool doToughCollision = true;
disableCollision();
if (mCollisionObject)
mCollisionObject->disableCollision();
if (getContainer()->castRay(startCast, endCast, mask, &rinfo))
{
F32 bd = -mDot(mVelocity, rinfo.normal);
if (bd >= 0.0)
{
// Contact!
if (mDataBlock->sticky && rinfo.object->getTypeMask() & (STATIC_COLLISION_TYPEMASK)) {
mVelocity.set(0, 0, 0);
mAtRest = true;
mAtRestCounter = 0;
stickyNotify = true;
mStickyCollisionPos = rinfo.point;
mStickyCollisionNormal = rinfo.normal;
doToughCollision = false;;
} else {
// Subtract out velocity into surface and friction
VectorF fv = mVelocity + rinfo.normal * bd;
F32 fvl = fv.len();
if (fvl) {
F32 ff = bd * mDataBlock->friction;
if (ff < fvl) {
fv *= ff / fvl;
fvl = ff;
}
}
bd *= 1 + mDataBlock->elasticity;
VectorF dv = rinfo.normal * (bd + 0.002);
mVelocity += dv;
mVelocity -= fv;
// Keep track of what we hit
contact = true;
U32 typeMask = rinfo.object->getTypeMask();
if (!(typeMask & StaticObjectType))
nonStatic = true;
if (isServerObject() && (typeMask & ShapeBaseObjectType)) {
ShapeBase* col = static_cast<ShapeBase*>(rinfo.object);
queueCollision(col,mVelocity - col->getVelocity());
}
}
}
}
enableCollision();
if (mCollisionObject)
mCollisionObject->enableCollision();
if (doToughCollision)
{
U32 count;
for (count = 0; count < 3; count++)
{
// Build list from convex states here...
end = pos + mVelocity * time;
collisionMatrix.setColumn(3, end);
Box3F wBox = getObjBox();
collisionMatrix.mul(wBox);
Box3F testBox = wBox;
Point3F oldMin = testBox.minExtents;
Point3F oldMax = testBox.maxExtents;
testBox.minExtents.setMin(oldMin + (mVelocity * time));
testBox.maxExtents.setMin(oldMax + (mVelocity * time));
sEarlyOutPolyList.clear();
sEarlyOutPolyList.mNormal.set(0,0,0);
sEarlyOutPolyList.mPlaneList.setSize(6);
sEarlyOutPolyList.mPlaneList[0].set(wBox.minExtents,VectorF(-1,0,0));
sEarlyOutPolyList.mPlaneList[1].set(wBox.maxExtents,VectorF(0,1,0));
sEarlyOutPolyList.mPlaneList[2].set(wBox.maxExtents,VectorF(1,0,0));
sEarlyOutPolyList.mPlaneList[3].set(wBox.minExtents,VectorF(0,-1,0));
sEarlyOutPolyList.mPlaneList[4].set(wBox.minExtents,VectorF(0,0,-1));
sEarlyOutPolyList.mPlaneList[5].set(wBox.maxExtents,VectorF(0,0,1));
CollisionWorkingList& eorList = mConvex.getWorkingList();
CollisionWorkingList* eopList = eorList.wLink.mNext;
while (eopList != &eorList) {
if ((eopList->mConvex->getObject()->getTypeMask() & mask) != 0)
{
Box3F convexBox = eopList->mConvex->getBoundingBox();
if (testBox.isOverlapped(convexBox))
{
eopList->mConvex->getPolyList(&sEarlyOutPolyList);
if (sEarlyOutPolyList.isEmpty() == false)
break;
}
}
eopList = eopList->wLink.mNext;
}
if (sEarlyOutPolyList.isEmpty())
{
pos = end;
break;
}
collisionMatrix.setColumn(3, pos);
sBoxPolyhedron.buildBox(collisionMatrix, mObjBox, true);
// Build extruded polyList...
VectorF vector = end - pos;
sExtrudedPolyList.extrude(sBoxPolyhedron, vector);
sExtrudedPolyList.setVelocity(mVelocity);
sExtrudedPolyList.setCollisionList(&collisionList);
CollisionWorkingList& rList = mConvex.getWorkingList();
CollisionWorkingList* pList = rList.wLink.mNext;
while (pList != &rList) {
if ((pList->mConvex->getObject()->getTypeMask() & mask) != 0)
{
Box3F convexBox = pList->mConvex->getBoundingBox();
if (testBox.isOverlapped(convexBox))
{
pList->mConvex->getPolyList(&sExtrudedPolyList);
}
}
pList = pList->wLink.mNext;
}
if (collisionList.getTime() < 1.0)
{
// Set to collision point
F32 dt = time * collisionList.getTime();
pos += mVelocity * dt;
time -= dt;
// Pick the most resistant surface
F32 bd = 0;
const Collision* collision = 0;
for (int c = 0; c < collisionList.getCount(); c++) {
const Collision &cp = collisionList[c];
F32 dot = -mDot(mVelocity,cp.normal);
if (dot > bd) {
bd = dot;
collision = &cp;
}
}
if (collision && mDataBlock->sticky && collision->object->getTypeMask() & (STATIC_COLLISION_TYPEMASK)) {
mVelocity.set(0, 0, 0);
mAtRest = true;
mAtRestCounter = 0;
stickyNotify = true;
mStickyCollisionPos = collision->point;
mStickyCollisionNormal = collision->normal;
break;
} else {
// Subtract out velocity into surface and friction
if (collision) {
VectorF fv = mVelocity + collision->normal * bd;
F32 fvl = fv.len();
if (fvl) {
F32 ff = bd * mDataBlock->friction;
if (ff < fvl) {
fv *= ff / fvl;
fvl = ff;
}
}
bd *= 1 + mDataBlock->elasticity;
VectorF dv = collision->normal * (bd + 0.002);
mVelocity += dv;
mVelocity -= fv;
// Keep track of what we hit
contact = true;
U32 typeMask = collision->object->getTypeMask();
if (!(typeMask & StaticObjectType))
nonStatic = true;
if (isServerObject() && (typeMask & ShapeBaseObjectType)) {
ShapeBase* col = static_cast<ShapeBase*>(collision->object);
queueCollision(col,mVelocity - col->getVelocity());
}
}
}
}
else
{
pos = end;
break;
}
}
if (count == 3)
{
// Couldn't move...
mVelocity.set(0, 0, 0);
}
}
// If on the client, calculate delta for backstepping
if (isGhost()) {
delta.pos = pos;
delta.posVec -= pos;
delta.dt = 1;
}
// Update transform
MatrixF mat = mObjToWorld;
mat.setColumn(3,pos);
Parent::setTransform(mat);
enableCollision();
if (mCollisionObject)
mCollisionObject->enableCollision();
updateContainer();
if ( mPhysicsRep )
mPhysicsRep->setTransform( mat );
//
if (contact) {
// Check for rest condition
if (!nonStatic && mVelocity.len() < sAtRestVelocity) {
mVelocity.x = mVelocity.y = mVelocity.z = 0;
mAtRest = true;
mAtRestCounter = 0;
}
// Only update the client if we hit a non-static shape or
// if this is our final rest pos.
if (nonStatic || mAtRest)
setMaskBits(PositionMask);
}
// Collision callbacks. These need to be processed whether we hit
// anything or not.
if (!isGhost())
{
SimObjectPtr<Item> safePtr(this);
if (stickyNotify)
{
notifyCollision();
if(bool(safePtr))
onStickyCollision_callback( getIdString() );
}
else
notifyCollision();
// water
if(bool(safePtr))
{
if(!mInLiquid && mWaterCoverage != 0.0f)
{
mInLiquid = true;
if ( !isGhost() )
mDataBlock->onEnterLiquid_callback( this, mWaterCoverage, mLiquidType.c_str() );
}
else if(mInLiquid && mWaterCoverage == 0.0f)
{
mInLiquid = false;
if ( !isGhost() )
mDataBlock->onLeaveLiquid_callback( this, mLiquidType.c_str() );
}
}
}
}
void Item::unpackUpdate(NetConnection *connection, BitStream *stream)
{
Parent::unpackUpdate(connection,stream);
// InitialUpdateMask
if (stream->readFlag()) {
mRotate = stream->readFlag();
mStatic = stream->readFlag();
if (stream->readFlag())
mathRead(*stream, &mObjScale);
else
mObjScale.set(1, 1, 1);
}
// ThrowSrcMask && mCollisionObject
if (stream->readFlag()) {
S32 gIndex = stream->readInt(NetConnection::GhostIdBitSize);
setCollisionTimeout(static_cast<ShapeBase*>(connection->resolveGhost(gIndex)));
}
MatrixF mat = mObjToWorld;
// RotationMask && !mRotate
if (stream->readFlag()) {
// Assumes rotation is about the Z axis
AngAxisF aa;
aa.axis.set(0.0f, 0.0f, stream->readFlag() ? -1.0f : 1.0f);
stream->read(&aa.angle);
aa.setMatrix(&mat);
Point3F pos;
mObjToWorld.getColumn(3,&pos);
mat.setColumn(3,pos);
}
// PositionMask
if (stream->readFlag()) {
Point3F pos;
mathRead(*stream, &pos);
F32 speed = mVelocity.len();
if ((mAtRest = stream->readFlag()) == true)
mVelocity.set(0.0f, 0.0f, 0.0f);
else
mathRead(*stream, &mVelocity);
if (stream->readFlag() && isProperlyAdded()) {
// Determin number of ticks to warp based on the average
// of the client and server velocities.
delta.warpOffset = pos - delta.pos;
F32 as = (speed + mVelocity.len()) * 0.5f * TickSec;
F32 dt = (as > 0.00001f) ? delta.warpOffset.len() / as: sMaxWarpTicks;
delta.warpTicks = (S32)((dt > sMinWarpTicks)? getMax(mFloor(dt + 0.5f), 1.0f): 0.0f);
if (delta.warpTicks)
{
// Setup the warp to start on the next tick, only the
// object's position is warped.
if (delta.warpTicks > sMaxWarpTicks)
delta.warpTicks = sMaxWarpTicks;
delta.warpOffset /= (F32)delta.warpTicks;
}
else {
// Going to skip the warp, server and client are real close.
// Adjust the frame interpolation to move smoothly to the
// new position within the current tick.
Point3F cp = delta.pos + delta.posVec * delta.dt;
VectorF vec = delta.pos - cp;
F32 vl = vec.len();
if (vl) {
F32 s = delta.posVec.len() / vl;
delta.posVec = (cp - pos) * s;
}
delta.pos = pos;
mat.setColumn(3,pos);
}
}
else {
// Set the item to the server position
delta.warpTicks = 0;
delta.posVec.set(0,0,0);
delta.pos = pos;
delta.dt = 0;
mat.setColumn(3,pos);
}
}
Parent::setTransform(mat);
}
Point3F Etherform::_move( const F32 travelTime, Collision *outCol )
{
// Try and move to new pos
F32 totalMotion = 0.0f;
// TODO: not used?
//F32 initialSpeed = mVelocity.len();
Point3F start;
Point3F initialPosition;
getTransform().getColumn(3,&start);
initialPosition = start;
static CollisionList collisionList;
static CollisionList physZoneCollisionList;
collisionList.clear();
physZoneCollisionList.clear();
MatrixF collisionMatrix(true);
collisionMatrix.setColumn(3, start);
VectorF firstNormal(0.0f, 0.0f, 0.0f);
F32 time = travelTime;
U32 count = 0;
static Polyhedron sBoxPolyhedron;
static ExtrudedPolyList sExtrudedPolyList;
static ExtrudedPolyList sPhysZonePolyList;
for (; count < sMoveRetryCount; count++) {
F32 speed = mVelocity.len();
if(!speed)
break;
Point3F end = start + mVelocity * time;
Point3F distance = end - start;
if (mFabs(distance.x) < mObjBox.len_x() &&
mFabs(distance.y) < mObjBox.len_y() &&
mFabs(distance.z) < mObjBox.len_z())
{
// We can potentially early out of this. If there are no polys in the clipped polylist at our
// end position, then we can bail, and just set start = end;
Box3F wBox = mScaledBox;
wBox.minExtents += end;
wBox.maxExtents += end;
static EarlyOutPolyList eaPolyList;
eaPolyList.clear();
eaPolyList.mNormal.set(0.0f, 0.0f, 0.0f);
eaPolyList.mPlaneList.clear();
eaPolyList.mPlaneList.setSize(6);
eaPolyList.mPlaneList[0].set(wBox.minExtents,VectorF(-1.0f, 0.0f, 0.0f));
eaPolyList.mPlaneList[1].set(wBox.maxExtents,VectorF(0.0f, 1.0f, 0.0f));
eaPolyList.mPlaneList[2].set(wBox.maxExtents,VectorF(1.0f, 0.0f, 0.0f));
eaPolyList.mPlaneList[3].set(wBox.minExtents,VectorF(0.0f, -1.0f, 0.0f));
eaPolyList.mPlaneList[4].set(wBox.minExtents,VectorF(0.0f, 0.0f, -1.0f));
eaPolyList.mPlaneList[5].set(wBox.maxExtents,VectorF(0.0f, 0.0f, 1.0f));
// Build list from convex states here...
CollisionWorkingList& rList = mConvex.getWorkingList();
CollisionWorkingList* pList = rList.wLink.mNext;
while (pList != &rList) {
Convex* pConvex = pList->mConvex;
if (pConvex->getObject()->getTypeMask() & sCollisionMoveMask) {
Box3F convexBox = pConvex->getBoundingBox();
if (wBox.isOverlapped(convexBox))
{
// No need to separate out the physical zones here, we want those
// to cause a fallthrough as well...
pConvex->getPolyList(&eaPolyList);
}
}
pList = pList->wLink.mNext;
}
if (eaPolyList.isEmpty())
{
totalMotion += (end - start).len();
start = end;
break;
}
}
collisionMatrix.setColumn(3, start);
sBoxPolyhedron.buildBox(collisionMatrix, mScaledBox, true);
// Setup the bounding box for the extrudedPolyList
Box3F plistBox = mScaledBox;
collisionMatrix.mul(plistBox);
Point3F oldMin = plistBox.minExtents;
Point3F oldMax = plistBox.maxExtents;
plistBox.minExtents.setMin(oldMin + (mVelocity * time) - Point3F(0.1f, 0.1f, 0.1f));
plistBox.maxExtents.setMax(oldMax + (mVelocity * time) + Point3F(0.1f, 0.1f, 0.1f));
// Build extruded polyList...
VectorF vector = end - start;
sExtrudedPolyList.extrude(sBoxPolyhedron,vector);
sExtrudedPolyList.setVelocity(mVelocity);
sExtrudedPolyList.setCollisionList(&collisionList);
sPhysZonePolyList.extrude(sBoxPolyhedron,vector);
sPhysZonePolyList.setVelocity(mVelocity);
sPhysZonePolyList.setCollisionList(&physZoneCollisionList);
// Build list from convex states here...
CollisionWorkingList& rList = mConvex.getWorkingList();
CollisionWorkingList* pList = rList.wLink.mNext;
while (pList != &rList) {
Convex* pConvex = pList->mConvex;
if (pConvex->getObject()->getTypeMask() & sCollisionMoveMask) {
Box3F convexBox = pConvex->getBoundingBox();
if (plistBox.isOverlapped(convexBox))
{
if (pConvex->getObject()->getTypeMask() & PhysicalZoneObjectType)
pConvex->getPolyList(&sPhysZonePolyList);
else
pConvex->getPolyList(&sExtrudedPolyList);
}
}
pList = pList->wLink.mNext;
}
// Take into account any physical zones...
for (U32 j = 0; j < physZoneCollisionList.getCount(); j++)
{
AssertFatal(dynamic_cast<PhysicalZone*>(physZoneCollisionList[j].object), "Bad phys zone!");
const PhysicalZone* pZone = (PhysicalZone*)physZoneCollisionList[j].object;
if (pZone->isActive())
mVelocity *= pZone->getVelocityMod();
}
if (collisionList.getCount() != 0 && collisionList.getTime() < 1.0f)
{
// Set to collision point
F32 velLen = mVelocity.len();
F32 dt = time * getMin(collisionList.getTime(), 1.0f);
start += mVelocity * dt;
time -= dt;
totalMotion += velLen * dt;
// Back off...
if ( velLen > 0.f ) {
F32 newT = getMin(0.01f / velLen, dt);
start -= mVelocity * newT;
totalMotion -= velLen * newT;
}
// Pick the surface most parallel to the face that was hit.
const Collision *collision = &collisionList[0];
const Collision *cp = collision + 1;
const Collision *ep = collision + collisionList.getCount();
for (; cp != ep; cp++)
{
if (cp->faceDot > collision->faceDot)
collision = cp;
}
F32 bd = -mDot(mVelocity, collision->normal);
// Copy this collision out so
// we can use it to do impacts
// and query collision.
*outCol = *collision;
// Subtract out velocity
VectorF dv = collision->normal * (bd + sNormalElasticity);
mVelocity += dv;
if (count == 0)
{
firstNormal = collision->normal;
}
else
{
if (count == 1)
{
// Re-orient velocity along the crease.
if (mDot(dv,firstNormal) < 0.0f &&
mDot(collision->normal,firstNormal) < 0.0f)
{
VectorF nv;
mCross(collision->normal,firstNormal,&nv);
F32 nvl = nv.len();
if (nvl)
{
if (mDot(nv,mVelocity) < 0.0f)
nvl = -nvl;
nv *= mVelocity.len() / nvl;
mVelocity = nv;
}
}
}
}
}
else
{
totalMotion += (end - start).len();
start = end;
break;
}
}
if (count == sMoveRetryCount)
{
// Failed to move
start = initialPosition;
mVelocity.set(0.0f, 0.0f, 0.0f);
}
return start;
}
