bool StackPromoter::canPromoteAlloc(SILInstruction *AI,
SILInstruction *&AllocInsertionPoint,
SILInstruction *&DeallocInsertionPoint) {
AllocInsertionPoint = nullptr;
DeallocInsertionPoint = nullptr;
auto *Node = ConGraph->getNodeOrNull(AI, EA);
if (!Node)
return false;
// The most important check: does the object escape the current function?
if (Node->escapes())
return false;
// Now we have to determine the lifetime of the allocated object in its
// function.
// Get all interesting uses of the object (e.g. release instructions). This
// includes uses of objects where the allocation is stored to.
int NumUsePointsToFind = ConGraph->getNumUsePoints(Node);
if (NumUsePointsToFind == 0) {
// There should always be at least one release for an allocated object.
// But in case all paths from this block end in unreachable then the
// final release of the object may be optimized away. We bail out in this
// case.
return false;
}
// Try to find the point where to insert the deallocation.
// This might need more than one try in case we need to move the allocation
// out of a stack-alloc-dealloc pair. See findDeallocPoint().
SILInstruction *StartInst = AI;
for (;;) {
SILInstruction *RestartPoint = nullptr;
DeallocInsertionPoint = findDeallocPoint(StartInst, RestartPoint, Node,
NumUsePointsToFind);
if (DeallocInsertionPoint)
return true;
if (!RestartPoint)
return false;
// Moving a buffer allocation call is not trivial because we would need to
// move all the parameter calculations as well. So we just don't do it.
if (!isa<AllocRefInst>(AI))
return false;
// Retry with moving the allocation up.
AllocInsertionPoint = RestartPoint;
StartInst = RestartPoint;
}
}
bool StackPromoter::canPromoteAlloc(SILInstruction *AI,
SILInstruction *&AllocInsertionPoint,
SILInstruction *&DeallocInsertionPoint) {
AllocInsertionPoint = nullptr;
DeallocInsertionPoint = nullptr;
auto *Node = ConGraph->getNodeOrNull(AI, EA);
if (!Node)
return false;
// The most important check: does the object escape the current function?
if (Node->escapes())
return false;
// Now we have to determine the lifetime of the allocated object in its
// function.
// Get all interesting uses of the object (e.g. release instructions). This
// includes uses of objects where the allocation is stored to.
int NumUsePointsToFind = ConGraph->getNumUsePoints(Node);
if (NumUsePointsToFind == 0) {
// There should always be at least one release for an allocated object.
// But in case all paths from this block end in unreachable then the
// final release of the object may be optimized away. We bail out in this
// case.
return false;
}
// In the following we check two requirements for stack promotion:
// 1) Are all uses in the same control region as the alloc? E.g. if the
// allocation is in a loop then there may not be any uses of the object
// outside the loop.
// 2) We need to find an insertion place for the deallocation so that it
// preserves a properly nested stack allocation-deallocation structure.
SILBasicBlock *StartBlock = AI->getParent();
// The block where we assume we can insert the deallocation.
SILBasicBlock *EndBlock = StartBlock;
// We visit all instructions starting at the allocation instruction.
WorkListType WorkList;
// It's important that the EndBlock is at the head of the WorkList so that
// we handle it after all other blocks.
WorkList.insert(EndBlock, -1);
WorkList.insert(StartBlock, 0);
for (;;) {
SILBasicBlock *BB = WorkList.pop_back_val();
int StackDepth = 0;
SILBasicBlock::iterator Iter;
if (BB == StartBlock) {
// In the first block we start at the allocation instruction and not at
// the begin of the block.
Iter = AI->getIterator();
} else {
// Track all uses in the block arguments.
for (SILArgument *BBArg : BB->getBBArgs()) {
if (ConGraph->isUsePoint(BBArg, Node))
NumUsePointsToFind--;
}
// Make sure that the EndBlock is not inside a loop (which does not
// contain the StartBlock).
// E.g.:
// %obj = alloc_ref // the allocation
// br loop
// loop:
// the_only_use_of_obj(%obj)
// cond_br ..., loop, exit
// exit:
// ... // this is the new EndBlock
for (SILBasicBlock *Pred : BB->getPreds()) {
// Extend the lifetime region until the EndBlock post dominates the
// StartBlock.
while (!strictlyPostDominates(EndBlock, Pred)) {
EndBlock = getImmediatePostDom(EndBlock);
if (!EndBlock)
return false;
}
}
Iter = BB->begin();
StackDepth = WorkList.getStackDepth(BB);
}
// Visit all instructions of the current block.
while (Iter != BB->end()) {
SILInstruction &I = *Iter++;
if (BB == EndBlock && StackDepth == 0 && NumUsePointsToFind == 0) {
// We found a place to insert the stack deallocation.
DeallocInsertionPoint = &I;
return true;
}
if (I.isAllocatingStack()) {
StackDepth++;
} else if (I.isDeallocatingStack()) {
if (StackDepth == 0) {
// The allocation is inside a stack alloc-dealloc region and we are
// now leaving this region without having found a place for the
// deallocation. E.g.
// E.g.:
// %1 = alloc_stack
// %obj = alloc_ref // the allocation
// dealloc_stack %1
// use_of_obj(%obj)
//
// In this case we can move the alloc_ref before the alloc_stack
// to fix the nesting.
if (!isa<AllocRefInst>(AI))
return false;
auto *Alloc = dyn_cast<SILInstruction>(I.getOperand(0));
if (!Alloc)
return false;
// This should always be the case, but let's be on the safe side.
if (!PDT->dominates(StartBlock, Alloc->getParent()))
return false;
AllocInsertionPoint = Alloc;
StackDepth++;
}
StackDepth--;
}
// Track a use.
if (ConGraph->isUsePoint(&I, Node) != 0)
NumUsePointsToFind--;
}
if (WorkList.empty()) {
if (EndBlock == BB) {
// We reached the EndBlock but didn't find a place for the deallocation
// so far (because we didn't find all uses yet or we entered another
// stack alloc-dealloc region). Let's extend our lifetime region.
// E.g.:
// %obj = alloc_ref // the allocation
// %1 = alloc_stack
// use_of_obj(%obj) // can't insert the deallocation in this block
// cond_br ..., bb1, bb2
// bb1:
// ...
// br bb2
// bb2:
// dealloc_stack %1 // this is the new EndBlock
EndBlock = getImmediatePostDom(EndBlock);
if (!EndBlock)
return false;
}
// Again, it's important that the EndBlock is the first in the WorkList.
WorkList.insert(EndBlock, -1);
}
// Push the successor blocks to the WorkList.
for (SILBasicBlock *Succ : BB->getSuccessors()) {
if (!strictlyDominates(StartBlock, Succ)) {
// The StartBlock is inside a loop but we couldn't find a deallocation
// place in this loop, e.g. because there are uses outside the loop.
// E.g.:
// %container = alloc_ref
// br loop
// loop:
// %obj = alloc_ref // the allocation
// store %obj to %some_field_in_container
// cond_br ..., loop, exit
// exit:
// use(%container)
return false;
}
WorkList.insert(Succ, StackDepth);
}
}
}
SILInstruction *StackPromoter::findDeallocPoint(SILInstruction *StartInst,
SILInstruction *&RestartPoint,
EscapeAnalysis::CGNode *Node,
int NumUsePointsToFind) {
// In the following we check two requirements for stack promotion:
// 1) Are all uses in the same control region as the alloc? E.g. if the
// allocation is in a loop then there may not be any uses of the object
// outside the loop.
// 2) We need to find an insertion place for the deallocation so that it
// preserves a properly nested stack allocation-deallocation structure.
SILBasicBlock *StartBlock = StartInst->getParent();
// The block where we assume we can insert the deallocation.
SILBasicBlock *EndBlock = StartBlock;
// We visit all instructions starting at the allocation instruction.
WorkListType WorkList;
// It's important that the EndBlock is at the head of the WorkList so that
// we handle it after all other blocks.
WorkList.insert(EndBlock, -1);
WorkList.insert(StartBlock, 0);
for (;;) {
SILBasicBlock *BB = WorkList.pop_back_val();
int StackDepth = 0;
SILBasicBlock::iterator Iter;
if (BB == StartBlock) {
// In the first block we start at the allocation instruction and not at
// the begin of the block.
Iter = StartInst->getIterator();
} else {
// Track all uses in the block arguments.
for (SILArgument *BBArg : BB->getArguments()) {
if (ConGraph->isUsePoint(BBArg, Node))
NumUsePointsToFind--;
}
// Make sure that the EndBlock is not inside a loop (which does not
// contain the StartBlock).
// E.g.:
// %obj = alloc_ref // the allocation
// br loop
// loop:
// the_only_use_of_obj(%obj)
// cond_br ..., loop, exit
// exit:
// ... // this is the new EndBlock
EndBlock = updateEndBlock(BB, EndBlock, WorkList);
if (!EndBlock)
return nullptr;
Iter = BB->begin();
StackDepth = WorkList.getStackDepth(BB);
}
// Visit all instructions of the current block.
while (Iter != BB->end()) {
SILInstruction &I = *Iter++;
if (BB == EndBlock && StackDepth == 0 && NumUsePointsToFind == 0) {
// We found a place to insert the stack deallocation.
return &I;
}
if (I.isAllocatingStack()) {
StackDepth++;
} else if (I.isDeallocatingStack()) {
if (StackDepth == 0) {
// The allocation is inside a stack alloc-dealloc region and we are
// now leaving this region without having found a place for the
// deallocation. E.g.
// E.g.:
// %1 = alloc_stack
// %obj = alloc_ref // the allocation
// dealloc_stack %1
// use_of_obj(%obj)
//
// In this case we can move the alloc_ref before the alloc_stack
// to fix the nesting.
auto *Alloc = dyn_cast<SILInstruction>(I.getOperand(0));
if (!Alloc)
return nullptr;
// This should always be the case, but let's be on the safe side.
if (!postDominates(StartBlock, Alloc->getParent()))
return nullptr;
// Trigger another iteration with a new start point;
RestartPoint = Alloc;
return nullptr;
}
StackDepth--;
}
// Track a use.
if (ConGraph->isUsePoint(&I, Node) != 0)
NumUsePointsToFind--;
}
if (WorkList.empty()) {
if (EndBlock == BB) {
// We reached the EndBlock but didn't find a place for the deallocation
// so far (because we didn't find all uses yet or we entered another
// stack alloc-dealloc region). Let's extend our lifetime region.
// E.g.:
// %obj = alloc_ref // the allocation
// %1 = alloc_stack
// use_of_obj(%obj) // can't insert the deallocation in this block
// cond_br ..., bb1, bb2
// bb1:
// ...
// br bb2
// bb2:
// dealloc_stack %1 // this is the new EndBlock
EndBlock = getImmediatePostDom(EndBlock);
if (!EndBlock)
return nullptr;
}
// Again, it's important that the EndBlock is the first in the WorkList.
WorkList.insert(EndBlock, -1);
}
// Push the successor blocks to the WorkList.
for (SILBasicBlock *Succ : BB->getSuccessors()) {
if (!strictlyDominates(StartBlock, Succ)) {
// The StartBlock is inside a loop but we couldn't find a deallocation
// place in this loop, e.g. because there are uses outside the loop.
// E.g.:
// %container = alloc_ref
// br loop
// loop:
// %obj = alloc_ref // the allocation
// store %obj to %some_field_in_container
// cond_br ..., loop, exit
// exit:
// use(%container)
return nullptr;
}
WorkList.insert(Succ, StackDepth);
}
}
}
