void
BrushSelector::buildPreviewBitmap( const Fairy::TextureInfo texInfo )
{
const Ogre::uchar BytePerPixel = 8;
// 读取原始image
Ogre::Image *oriImage = GetSceneManipulator()->getPreviewImage(texInfo.ownerTextureName);
// 源大纹理的大小
size_t oriImageHeight = oriImage->getHeight();
size_t oriImageWidth = oriImage->getWidth();
Ogre::uchar *oriImageData = oriImage->getData();
// 所选纹理的大小
size_t newImageWidth = texInfo.width*TexTileSize;
size_t newImageHeight = texInfo.height*TexTileSize;
// 分配一个足够大的空间来保存新建的image的数据
size_t newImagegetRowSpan = newImageWidth*oriImage->getBPP()/BytePerPixel; // 新建的image的行宽（单位为字节）
Ogre::uchar *newImageData = OGRE_ALLOC_T(Ogre::uchar, oriImageHeight*newImagegetRowSpan, Ogre::MEMCATEGORY_GENERAL);//new Ogre::uchar[newImageHeight*newImagegetRowSpan];
Ogre::uchar *newImageDataPointer = newImageData;
// 得知起始像素点
size_t startPoint = ( oriImageWidth * texInfo.topCorner + texInfo.leftCorner )
* TexTileSize * oriImage->getBPP()/BytePerPixel;
Ogre::uchar *oriImagedataPointer = oriImageData + startPoint;
// 把所选的纹理的数据提取出来，并创建一个新的image
for ( Ogre::uint i=0; i<newImageHeight; ++i )
{
memcpy(newImageDataPointer, oriImagedataPointer, newImagegetRowSpan);
newImageDataPointer += newImagegetRowSpan;
oriImagedataPointer += oriImage->getRowSpan();
}
Ogre::Image newImage;
newImage.loadDynamicImage(newImageData,newImageWidth,newImageHeight,1,oriImage->getFormat(),true);
// 如果所选纹理大于64*64，就先resize
if ( texInfo.width > 1 || texInfo.height > 1 )
newImage.resize(mPreviewImageWidth, mPreviewImageHeight);
// 如果有alpha，要与黑白图进行混合
if ( newImage.getHasAlpha() )
{
Ogre::ColourValue col;
for ( int i=0; i<mPreviewImageWidth; ++i )
{
for ( int j=0; j<mPreviewImageWidth; ++j )
{
col = newImage.getColourAt(j,i,0);
float alphaValue = col.a;
unsigned char r = col.r*255 * alphaValue + mBlackWhitePreviewImage.GetRed(i,j) * ( 1.0f - alphaValue);
unsigned char g = col.g*255 * alphaValue + mBlackWhitePreviewImage.GetGreen(i,j) * ( 1.0f - alphaValue);
unsigned char b = col.b*255 * alphaValue + mBlackWhitePreviewImage.GetBlue(i,j) * ( 1.0f - alphaValue);
// 设置到image中
mCurrentPreviewImage.SetRGB(j,i,r,g,b);
}
}
// 设置到缩略图控件中
mBrushesPreview->SetBitmap(mCurrentPreviewImage);
}
// 没有alpha，就直接拷贝数据
else
{
Ogre::ColourValue col;
for ( int i=0; i<mPreviewImageWidth; ++i )
{
for ( int j=0; j<mPreviewImageWidth; ++j )
{
col = newImage.getColourAt(j,i,0);
unsigned char r = col.r*255;
unsigned char g = col.g*255;
unsigned char b = col.b*255;
// 设置到image中
mCurrentPreviewImage.SetRGB(j,i,r,g,b);
}
}
mBrushesPreview->SetBitmap(mCurrentPreviewImage);
}
}
void
MaterialPreviewDialog::buildPreviewBitmap( const Ogre::String &texName )
{
const Ogre::uchar BytePerPixel = 8;
// 读取原始image
Ogre::Image *oriImage = getPreviewImage(texName);
// 源大纹理的大小
size_t oriImageHeight = oriImage->getHeight();
size_t oriImageWidth = oriImage->getWidth();
Ogre::uchar *oriImageData = oriImage->getData();
// 分配一个足够大的空间来保存新建的image的数据
size_t newImagegetRowSpan = oriImageWidth*oriImage->getBPP()/BytePerPixel; // 新建的image的行宽（单位为字节）
Ogre::uchar *newImageData = new Ogre::uchar[oriImageHeight*newImagegetRowSpan];
Ogre::uchar *newImageDataPointer = newImageData;
Ogre::uchar *oriImagedataPointer = oriImageData;
// 把所选的纹理的数据提取出来，并创建一个新的image
for ( Ogre::uint i=0; i<oriImageHeight; ++i )
{
memcpy(newImageDataPointer, oriImagedataPointer, newImagegetRowSpan);
newImageDataPointer += newImagegetRowSpan;
oriImagedataPointer += oriImage->getRowSpan();
}
Ogre::Image newImage;
newImage.loadDynamicImage(newImageData,oriImageWidth,oriImageHeight,1,oriImage->getFormat(),true);
// 如果所选纹理大于64*64，就先resize
if ( oriImageWidth > mPreviewImageWidth || oriImageHeight > mPreviewImageHeight )
newImage.resize(mPreviewImageWidth, mPreviewImageHeight);
// 如果有alpha，要与黑白图进行混合
if ( newImage.getHasAlpha() )
{
Ogre::uchar *tempPtr = newImage.getData();
assert (tempPtr);
for ( size_t i=0; i<mPreviewImageHeight; ++i )
for ( size_t j=0; j<mPreviewImageWidth; ++j )
{
// 取出alpha值
float alphaValue = (float)tempPtr[3] / 255.0f;
// 计算出经过alpha混合后的颜色值
unsigned char r = tempPtr[2] * alphaValue;
unsigned char g = tempPtr[1] * alphaValue;
unsigned char b = tempPtr[0] * alphaValue;
// 设置到image中
mCurrentPreviewImage.SetRGB(j,i,r,g,b);
tempPtr += 4;
}
// 要把指针移回到图片数据的
tempPtr -= mPreviewImageHeight * mPreviewImageWidth * 4;
// 设置到缩略图控件中
}
// 没有alpha，就直接拷贝数据
else
{
memcpy ( mCurrentPreviewImage.GetData(), newImage.getData(), newImage.getSize() );
}
}
void
Terrain::_createAtlasPixmap(size_t pixmapId)
{
const TerrainData::Pixmap& pixmap = mData->mPixmaps[pixmapId];
size_t textureId = pixmap.textureId;
assert(textureId < mData->mTextures.size());
const Ogre::String& textureName = mData->mTextures[textureId];
// If the atlas texture already exist, use it.
AtlasArray::const_iterator it;
for (it = mAtlases.begin(); it != mAtlases.end(); ++it)
{
if (it->texture->getName() == textureName)
break;
}
if (it != mAtlases.end())
{
// Fill up atlas pixmap info
size_t atlasId = it - mAtlases.begin() + 1;
mAtlasPixmaps[pixmapId].atlasId = atlasId;
mAtlasPixmaps[pixmapId].left = pixmap.left;
mAtlasPixmaps[pixmapId].top = pixmap.top;
mAtlasPixmaps[pixmapId].right = pixmap.right;
mAtlasPixmaps[pixmapId].bottom = pixmap.bottom;
return;
}
// If texture already loaded and is composited, use it without any modify.
Ogre::TexturePtr texture = Ogre::TextureManager::getSingleton().getByName(textureName);
if (!texture.isNull() &&
(texture->getWidth() > mAtlasPixmapSize || texture->getHeight() > mAtlasPixmapSize))
{
mAtlases.push_back(Atlas());
Atlas& atlas = mAtlases.back();
atlas.texture = texture;
// Fill up atlas pixmap info
size_t atlasId = mAtlases.size();
mAtlasPixmaps[pixmapId].atlasId = atlasId;
mAtlasPixmaps[pixmapId].left = pixmap.left;
mAtlasPixmaps[pixmapId].top = pixmap.top;
mAtlasPixmaps[pixmapId].right = pixmap.right;
mAtlasPixmaps[pixmapId].bottom = pixmap.bottom;
return;
}
// Load the image
Ogre::Image image;
image.load(textureName, BRUSH_RESOURCE_GROUP_NAME);
// If the image is composited, use it without any modify.
if (image.getWidth() > mAtlasPixmapSize || image.getHeight() > mAtlasPixmapSize)
{
mAtlases.push_back(Atlas());
Atlas& atlas = mAtlases.back();
// re-use the loaded image avoid load it again
atlas.texture =
Ogre::TextureManager::getSingleton()
.loadImage(textureName, BRUSH_RESOURCE_GROUP_NAME, image);
// Fill up atlas pixmap info
size_t atlasId = mAtlases.size();
mAtlasPixmaps[pixmapId].atlasId = atlasId;
mAtlasPixmaps[pixmapId].left = pixmap.left;
mAtlasPixmaps[pixmapId].top = pixmap.top;
mAtlasPixmaps[pixmapId].right = pixmap.right;
mAtlasPixmaps[pixmapId].bottom = pixmap.bottom;
return;
}
// Composite into the atlas texture.
bool isTransparent = image.getHasAlpha();
AtlasAllocInfo& allocInfo = isTransparent ? mTransparentAtlasAllocInfo : mSolidAtlasAllocInfo;
if (allocInfo.blockId >= mMaxAtlasBlockId)
{
// Use special name to avoid confuse with other reference with this texture
Ogre::String atlasName = "<Terrain/Atlas>:" + Ogre::StringConverter::toString(mAtlases.size());
mAtlases.push_back(Atlas());
Atlas& atlas = mAtlases.back();
Ogre::PixelFormat pixelFormat = isTransparent ? Ogre::PF_A8R8G8B8 : Ogre::PF_X8R8G8B8;
atlas.image.bind(new Ogre::Image);
atlas.image->loadDynamicImage(0, mAtlasTextureSize, mAtlasTextureSize, 1, pixelFormat, true, 1, mAtlasNumMipMaps);
memset(atlas.image->getData(), 0, atlas.image->getSize());
atlas.texture =
Ogre::TextureManager::getSingleton().createManual(atlasName,
BRUSH_RESOURCE_GROUP_NAME, Ogre::TEX_TYPE_2D,
atlas.image->getWidth(), atlas.image->getHeight(),
mAtlasNumMipMaps, atlas.image->getFormat(),
Ogre::TU_DYNAMIC_WRITE_ONLY_DISCARDABLE,
this);
allocInfo.atlasId = mAtlases.size();
allocInfo.blockId = 0;
}
// Copy origin pixmap to atlas image
Atlas& atlas = mAtlases[allocInfo.atlasId - 1];
int blockX = allocInfo.blockId % mAtlasBlockSize;
int blockY = allocInfo.blockId / mAtlasBlockSize;
Ogre::PixelBox dst = atlas.image->getPixelBox().getSubVolume(Ogre::Box(
blockX * mAtlasPixmapSize,
blockY * mAtlasPixmapSize,
blockX * mAtlasPixmapSize + mAtlasPixmapSize,
blockY * mAtlasPixmapSize + mAtlasPixmapSize));
Ogre::PixelBox src = image.getPixelBox().getSubVolume(Ogre::Box(
fast_ifloor(pixmap.left * image.getWidth() + 0.5f),
fast_ifloor(pixmap.top * image.getHeight() + 0.5f),
fast_ifloor(pixmap.right * image.getWidth() + 0.5f),
fast_ifloor(pixmap.bottom * image.getHeight() + 0.5f)));
if (src.getWidth() == mAtlasPixmapSize && src.getHeight() == mAtlasPixmapSize)
Ogre::PixelUtil::bulkPixelConversion(src, dst);
else
Ogre::Image::scale(src, dst);
// Generate mipmaps manual
for (size_t mipmap = 1; mipmap <= mAtlasNumMipMaps; ++mipmap)
{
src = dst;
size_t pixmapSize = mAtlasPixmapSize >> mipmap;
dst = atlas.image->getPixelBox(0, mipmap).getSubVolume(Ogre::Box(
blockX * pixmapSize,
blockY * pixmapSize,
blockX * pixmapSize + pixmapSize,
blockY * pixmapSize + pixmapSize));
Ogre::Image::scale(src, dst);
}
// Notify that the atlas texture need to reload
if (atlas.texture->isLoaded())
atlas.texture->unload();
++allocInfo.blockId;
// Fill up atlas pixmap info
mAtlasPixmaps[pixmapId].atlasId = allocInfo.atlasId;
mAtlasPixmaps[pixmapId].left = blockX * mAtlasBlockTexCoordInc + 0.5f / mAtlasTextureSize;
mAtlasPixmaps[pixmapId].top = blockY * mAtlasBlockTexCoordInc + 0.5f / mAtlasTextureSize;
mAtlasPixmaps[pixmapId].right = mAtlasPixmaps[pixmapId].left + mAtlasBlockTexCoordInc - 1.0f / mAtlasTextureSize;
mAtlasPixmaps[pixmapId].bottom = mAtlasPixmaps[pixmapId].top + mAtlasBlockTexCoordInc - 1.0f / mAtlasTextureSize;
}
void
MaterialPreviewDialog::buildPreviewBitmap( const Ogre::String &texName )
{
const Ogre::uchar BytePerPixel = 8;
// 读取原始image
Ogre::Image *oriImage = getPreviewImage(texName);
// 源大纹理的大小
size_t oriImageHeight = oriImage->getHeight();
size_t oriImageWidth = oriImage->getWidth();
Ogre::uchar *oriImageData = oriImage->getData();
// 分配一个足够大的空间来保存新建的image的数据
size_t newImagegetRowSpan = oriImageWidth*oriImage->getBPP()/BytePerPixel; // 新建的image的行宽（单位为字节）
Ogre::uchar *newImageData = OGRE_ALLOC_T(Ogre::uchar, oriImageHeight*newImagegetRowSpan, Ogre::MEMCATEGORY_GENERAL);//new Ogre::uchar[oriImageHeight*newImagegetRowSpan];
Ogre::uchar *newImageDataPointer = newImageData;
Ogre::uchar *oriImagedataPointer = oriImageData;
// 把所选的纹理的数据提取出来，并创建一个新的image
for ( Ogre::uint i=0; i<oriImageHeight; ++i )
{
memcpy(newImageDataPointer, oriImagedataPointer, newImagegetRowSpan);
newImageDataPointer += newImagegetRowSpan;
oriImagedataPointer += oriImage->getRowSpan();
}
Ogre::Image newImage;
newImage.loadDynamicImage(newImageData,oriImageWidth,oriImageHeight,1,oriImage->getFormat(),true);
// 如果所选纹理大于64*64，就先resize
if ( oriImageWidth > mPreviewImageWidth || oriImageHeight > mPreviewImageHeight )
newImage.resize(mPreviewImageWidth, mPreviewImageHeight);
// 如果有alpha，要与黑白图进行混合
if ( newImage.getHasAlpha() )
{
Ogre::ColourValue col;
for ( int i=0; i<mPreviewImageWidth; ++i )
{
for ( int j=0; j<mPreviewImageWidth; ++j )
{
col = newImage.getColourAt(j,i,0);
float alphaValue = col.a;
unsigned char r = col.r*255 * alphaValue;
unsigned char g = col.g*255 * alphaValue;
unsigned char b = col.b*255 * alphaValue;
// 设置到image中
mCurrentPreviewImage.SetRGB(j,i,r,g,b);
}
}
}
// 没有alpha，就直接拷贝数据
else
{
Ogre::ColourValue col;
for ( int i=0; i<mPreviewImageWidth; ++i )
{
for ( int j=0; j<mPreviewImageWidth; ++j )
{
col = newImage.getColourAt(j,i,0);
unsigned char r = col.r*255;
unsigned char g = col.g*255;
unsigned char b = col.b*255;
// 设置到image中
mCurrentPreviewImage.SetRGB(j,i,r,g,b);
}
}
}
}
