//Analyze a subset of chips in a Domain...
//This is a mini analysis of some of the chips in the Fabric Domain.
int32_t FabricDomain::AnalyzeTheseChips(STEP_CODE_DATA_STRUCT & serviceData,
ATTENTION_TYPE attentionType,
TARGETING::TargetHandleList & i_chips)
{
using namespace TARGETING ;
PRDF_DENTER( "FabricDomain::AnalyzeTheseChips" );
int32_t l_rc = ~SUCCESS;
PRDF_DTRAC( "FabricDomain::AnalyzeTheseChips:: Domain ID = 0x%X", GetId() );
if(i_chips.size() != 0)
{
for (TargetHandleList::iterator i = i_chips.begin(); i != i_chips.end(); ++i)
{
PRDF_DTRAC( "FabricDomain::AnalyzeTheseChips::Before--chip=0x%X",
PlatServices::getHuid(*i));
}
OrderTheseChips(attentionType, i_chips);
for (TargetHandleList::iterator i = i_chips.begin(); i != i_chips.end(); ++i)
{
PRDF_DTRAC( "FabricDomain::AnalyzeTheseChips::After--chip=0x%X",
PlatServices::getHuid(*i) );
}
//After the Order function is called the first chip should contain the chip to look at.
//Look here for the correct LookUp function. I don't think this is working.
RuleChip * l_fabChip = FindChipInTheseChips(i_chips[0], i_chips);
PRDF_DTRAC( "FabricDomain::AnalyzeTheseChips::Analyzing this one: 0x%X",
l_fabChip->GetId() );
if(NULL != l_fabChip)
{
l_rc = l_fabChip->Analyze(serviceData, attentionType);
}
else
{
PRDF_DTRAC( "FabricDomain::AnalyzeTheseChips::l_fabChip is NULL" );
l_rc = ~SUCCESS;
}
}
else
{
PRDF_DTRAC( "FabricDomain::AnalyzeTheseChips::i_chips = %d",
i_chips.size() );
}
//Get P7 chip Global FIR data for FFDC
for (TargetHandleList::iterator i = i_chips.begin(); i != i_chips.end(); ++i)
{
RuleChip * l_fabChip = FindChipInTheseChips(*i, i_chips);
l_fabChip->CaptureErrorData(
serviceData.service_data->GetCaptureData(),
Util::hashString("GlobalFIRs"));
}
PRDF_DEXIT( "FabricDomain::AnalyzeTheseChips" );
return l_rc;
}
//Swaps chip at location 0 with a chip at location i_chipToFront
void FabricDomain::MoveToFrontInTheseChips(uint32_t i_chipToFront, TARGETING::TargetHandleList & i_chips)
{
using namespace TARGETING;
for (TargetHandleList::iterator i = i_chips.begin()+i_chipToFront; i != i_chips.begin(); i--)
{
std::swap((*i), (*(i-1)));
}
}
/**
* @brief This function updates the NVDIMM firmware code
*/
void call_nvdimm_update()
{
TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,ENTER_MRK"call_nvdimm_update()");
TARGETING::TargetHandleList l_nvdimmTargetList;
TARGETING::TargetHandleList l_procList;
TARGETING::getAllChips(l_procList, TARGETING::TYPE_PROC, false);
// grab the NVDIMMs under each processor and add to overall list
for (auto l_proc : l_procList)
{
TARGETING::TargetHandleList tmpList =
TARGETING::getProcNVDIMMs(l_proc);
l_nvdimmTargetList.insert(l_nvdimmTargetList.end(),
tmpList.begin(), tmpList.end());
}
// Run the nvdimm update function if the list is not empty
if ( !l_nvdimmTargetList.empty() )
{
TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
"call_nvdimm_update(): found %d nvdimms to check for update",
l_nvdimmTargetList.size());
bool updateWorked = NVDIMM::nvdimm_update(l_nvdimmTargetList);
if (!updateWorked)
{
TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
"call_nvdimm_update(): nvdimm update failed");
}
}
TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,EXIT_MRK"call_nvdimm_update()");
}
//******************************************************************************
// wrapper function to call proc_build_smp
//******************************************************************************
void* call_proc_build_smp( void *io_pArgs )
{
errlHndl_t l_errl = NULL;
IStepError l_StepError;
TRACDCOMP( ISTEPS_TRACE::g_trac_isteps_trace,
"call_proc_build_smp entry" );
do
{
// Get all functional proc chip targets
TARGETING::TargetHandleList l_cpuTargetList;
getAllChips(l_cpuTargetList, TYPE_PROC);
// Collect all valid abus connections and xbus connections
TargetPairs_t l_abusConnections;
TargetPairs_t l_xbusConnections;
l_errl = PbusLinkSvc::getTheInstance().getPbusConnections(
l_abusConnections, TYPE_ABUS, false );
if (l_errl)
{
// Create IStep error log and cross reference error that occurred
l_StepError.addErrorDetails( l_errl);
// Commit error
errlCommit( l_errl, HWPF_COMP_ID );
}
// Get XBUS connections
l_errl = PbusLinkSvc::getTheInstance().getPbusConnections(
l_xbusConnections, TYPE_XBUS, false );
if (l_errl)
{
// Create IStep error log and cross reference error that occurred
l_StepError.addErrorDetails( l_errl);
// Commit error
errlCommit( l_errl, HWPF_COMP_ID );
}
// Populate l_proc_Chips vector for each good processor chip
// if a A/X-bus endpoint has a valid connection, then
// obtain the proc chip target of the other endpoint of the
// connection, build the fapi target to update the corresponding
// chip object of this A/X-bus endpoint for the procEntry
std::vector<proc_build_smp_proc_chip> l_procChips;
// Get the master proc
TARGETING::Target * l_masterProc = NULL;
(void)TARGETING::targetService().
masterProcChipTargetHandle( l_masterProc );
for (TARGETING::TargetHandleList::const_iterator
l_cpuIter = l_cpuTargetList.begin();
l_cpuIter != l_cpuTargetList.end();
++l_cpuIter)
{
const TARGETING::Target* l_pTarget = *l_cpuIter;
fapi::Target l_fapiproc_target( TARGET_TYPE_PROC_CHIP,
(const_cast<TARGETING::Target*>(l_pTarget)));
proc_build_smp_proc_chip l_procEntry;
l_procEntry.this_chip = l_fapiproc_target;
l_procEntry.enable_f0 = false;
l_procEntry.enable_f1 = false;
if (l_pTarget == l_masterProc)
{
l_procEntry.master_chip_sys_next = true;
}
else
{
l_procEntry.master_chip_sys_next = false;
}
// Get A-BUS
//abus connections were found so can get the a-bus
TARGETING::TargetHandleList l_abuses;
getChildChiplets( l_abuses, l_pTarget, TYPE_ABUS );
for (TARGETING::TargetHandleList::const_iterator
l_abusIter = l_abuses.begin();
l_abusIter != l_abuses.end();
++l_abusIter)
{
const TARGETING::Target * l_target = *l_abusIter;
uint8_t l_srcID = l_target->getAttr<ATTR_CHIP_UNIT>();
TargetPairs_t::iterator l_itr =
l_abusConnections.find(l_target);
if ( l_itr == l_abusConnections.end() )
{
continue;
}
fapi::Target l_fapiEndpointTarget(TARGET_TYPE_ABUS_ENDPOINT,
(const_cast<TARGETING::Target*>(l_itr->second)) );
switch (l_srcID)
{
case 0:
l_procEntry.a0_chip = l_fapiEndpointTarget;
break;
case 1:
l_procEntry.a1_chip = l_fapiEndpointTarget;
break;
case 2:
l_procEntry.a2_chip = l_fapiEndpointTarget;
break;
default:
break;
}
const TARGETING::Target *l_pParent =
getParentChip(
(const_cast<TARGETING::Target*>(l_itr->second)));
l_procEntry.f0_node_id = static_cast<proc_fab_smp_node_id>(
l_pTarget->getAttr<TARGETING::ATTR_FABRIC_NODE_ID>());
l_procEntry.f1_node_id = static_cast<proc_fab_smp_node_id>(
l_pParent->getAttr<TARGETING::ATTR_FABRIC_NODE_ID>());
}
// Get X-BUS
TARGETING::TargetHandleList l_xbuses;
getChildChiplets( l_xbuses, l_pTarget, TYPE_XBUS );
for (TARGETING::TargetHandleList::const_iterator
l_xbusIter = l_xbuses.begin();
l_xbusIter != l_xbuses.end();
++l_xbusIter)
{
const TARGETING::Target * l_target = *l_xbusIter;
uint8_t l_srcID = l_target->getAttr<ATTR_CHIP_UNIT>();
TargetPairs_t::iterator l_itr =
l_xbusConnections.find(l_target);
if ( l_itr == l_xbusConnections.end() )
{
continue;
}
fapi::Target l_fapiEndpointTarget(TARGET_TYPE_XBUS_ENDPOINT,
(const_cast<TARGETING::Target*>(l_itr->second)) );
switch (l_srcID)
{
case 0:
l_procEntry.x0_chip = l_fapiEndpointTarget;
break;
case 1:
l_procEntry.x1_chip = l_fapiEndpointTarget;
break;
case 2:
l_procEntry.x2_chip = l_fapiEndpointTarget;
break;
case 3:
l_procEntry.x3_chip = l_fapiEndpointTarget;
break;
default:
break;
}
}
l_procChips.push_back( l_procEntry );
}
// call the HWP with each fapi::Target
FAPI_INVOKE_HWP( l_errl, proc_build_smp, l_procChips,
SMP_ACTIVATE_PHASE1 );
if(l_errl)
{
TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
"ERROR : proc_build_smp" );
// Create IStep error log and cross reference error that occurred
l_StepError.addErrorDetails(l_errl);
// Commit error
errlCommit( l_errl, HWPF_COMP_ID );
break;
}
else
{
TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
"SUCCESS : proc_build_smp" );
}
// At the point where we can now change the proc chips to use
// XSCOM rather than FSISCOM which is the default.
TARGETING::TargetHandleList procChips;
getAllChips(procChips, TYPE_PROC);
TARGETING::TargetHandleList::iterator curproc = procChips.begin();
// Loop through all proc chips
while(curproc != procChips.end())
{
TARGETING::Target* l_proc_target = *curproc;
// If the proc chip supports xscom..
if (l_proc_target->getAttr<ATTR_PRIMARY_CAPABILITIES>()
.supportsXscom)
{
ScomSwitches l_switches =
l_proc_target->getAttr<ATTR_SCOM_SWITCHES>();
// If Xscom is not already enabled.
if ((l_switches.useXscom != 1) || (l_switches.useFsiScom != 0))
{
l_switches.useFsiScom = 0;
l_switches.useXscom = 1;
// Turn off FSI scom and turn on Xscom.
l_proc_target->setAttr<ATTR_SCOM_SWITCHES>(l_switches);
// Reset the FSI2OPB logic on the new chips
l_errl = FSI::resetPib2Opb(l_proc_target);
if(l_errl)
{
TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
"ERROR : resetPib2Opb on %.8X",
TARGETING::get_huid(l_proc_target));
// Create IStep error log and cross reference error that occurred
l_StepError.addErrorDetails(l_errl);
// Commit error
errlCommit( l_errl, HWPF_COMP_ID );
break;
}
}
}
// Enable PSI interrupts even if can't Xscom as
// Pbus is up and interrupts can flow
l_errl = INTR::enablePsiIntr(l_proc_target);
if(l_errl)
{
// capture the target data in the elog
ErrlUserDetailsTarget(l_proc_target).addToLog( l_errl );
break;
}
++curproc;
}
} while (0);
TRACDCOMP( ISTEPS_TRACE::g_trac_isteps_trace,
"call_proc_build_smp exit" );
// end task, returning any errorlogs to IStepDisp
return l_StepError.getErrorHandle();
}
int32_t FabricDomain::OrderTheseChips(ATTENTION_TYPE attentionType,
TARGETING::TargetHandleList & i_chips)
{
using namespace PluginDef;
using namespace TARGETING;
PRDF_DENTER( "FabricDomain::OrderTheseChips" );
uint32_t l_internalOnlyCount = 0;
uint64_t l_externalDrivers[i_chips.size()];
uint64_t l_wofValues[i_chips.size()];
bool l_internalCS[i_chips.size()];
union { uint64_t * u; CPU_WORD * c; } ptr;
uint32_t l_chip = 0;
uint32_t l_chipToFront = 0;
// Get internal setting and external driver list for each chip.
for (TargetHandleList::iterator i = i_chips.begin(); i != i_chips.end(); ++i)
{
RuleChip * l_fabChip = FindChipInTheseChips(*i, i_chips);
ptr.u = &l_externalDrivers[l_chip];
BitString l_externalChips(i_chips.size(), ptr.c);
TargetHandleList l_tmpList;
if(l_fabChip != NULL)
{
// Call "GetCheckstopInfo" plugin.
ExtensibleChipFunction * l_extFunc
= l_fabChip->getExtensibleFunction("GetCheckstopInfo");
(*l_extFunc)(l_fabChip,
bindParm<bool &, TargetHandleList &, uint64_t &>
(l_internalCS[l_chip],
l_tmpList,
l_wofValues[l_chip]
)
);
}
else
{
l_internalCS[l_chip] = false;
PRDF_DTRAC( "FabricDomain::OrderTheseChips: l_fabChip is NULL" );
}
//If we are just checking for internal errors then there is no need for
//a list of what chips sent checkstops where.
// Update bit buffer.
for (TargetHandleList::iterator j = l_tmpList.begin();
j != l_tmpList.end();
++j)
{
for (uint32_t k = 0; k < i_chips.size(); k++)
if ((*j) == LookUp(k)->GetChipHandle())
l_externalChips.Set(k);
};
// Check if is internal.
if (l_internalCS[l_chip])
{
l_internalOnlyCount++;
l_chipToFront = l_chip;
}
l_chip++; //Move to next chip in the list.
}
// Check if we are done... only one with an internal error.
if (1 == l_internalOnlyCount)
{
MoveToFrontInTheseChips(l_chipToFront, i_chips);
return(SUCCESS);
}
PRDF_DEXIT( "FabricDomain::OrderTheseChips" );
return(SUCCESS);
}
void HBVddrMsg::createVddrData(
VDDR_MSG_TYPE i_requestType,
RequestContainer& io_request) const
{
TRACFCOMP( g_trac_volt, ENTER_MRK "HBVddrMsg::createVddrData" );
// Go through all the memory buffers and gather their domains, domain
// specific IDs, and domain specific voltages
io_request.clear();
do{
TARGETING::TargetHandleList membufTargetList;
//When request is a disable command, disable all present Centaurs
// in case we go through a reconfigure loop
if(i_requestType == HB_VDDR_DISABLE)
{
getChipResources( membufTargetList, TYPE_MEMBUF,
UTIL_FILTER_PRESENT );
}
//When the request is an enable command, enable only functional
// centaurs.
else
{
getAllChips(membufTargetList, TYPE_MEMBUF);
}
TARGETING::Target* pMembuf =NULL;
for (TARGETING::TargetHandleList::const_iterator
ppMembuf = membufTargetList.begin();
ppMembuf != membufTargetList.end();
++ppMembuf)
{
pMembuf = *ppMembuf;
if(i_requestType == HB_VDDR_ENABLE)
{
(void)addMemoryVoltageDomains<
TARGETING::ATTR_MSS_CENT_VDD_OFFSET_DISABLE,
TARGETING::ATTR_MEM_VDD_OFFSET_MILLIVOLTS,
TARGETING::ATTR_MEM_VDD_OFFSET_MILLIVOLTS,
TARGETING::ATTR_VDD_ID>(
pMembuf,
io_request);
(void)addMemoryVoltageDomains<
TARGETING::ATTR_MSS_CENT_AVDD_OFFSET_DISABLE,
TARGETING::ATTR_MEM_AVDD_OFFSET_MILLIVOLTS,
TARGETING::ATTR_MEM_AVDD_OFFSET_MILLIVOLTS,
TARGETING::ATTR_AVDD_ID>(
pMembuf,
io_request);
(void)addMemoryVoltageDomains<
TARGETING::ATTR_MSS_CENT_VCS_OFFSET_DISABLE,
TARGETING::ATTR_MEM_VCS_OFFSET_MILLIVOLTS,
TARGETING::ATTR_MEM_VCS_OFFSET_MILLIVOLTS,
TARGETING::ATTR_VCS_ID>(
pMembuf,
io_request);
(void)addMemoryVoltageDomains<
TARGETING::ATTR_MSS_VOLT_VPP_OFFSET_DISABLE,
TARGETING::ATTR_MEM_VPP_OFFSET_MILLIVOLTS,
TARGETING::ATTR_VPP_BASE,
TARGETING::ATTR_VPP_ID>(
pMembuf,
io_request);
}
(void)addMemoryVoltageDomains<
TARGETING::ATTR_MSS_VOLT_VDDR_OFFSET_DISABLE,
TARGETING::ATTR_MEM_VDDR_OFFSET_MILLIVOLTS,
TARGETING::ATTR_MSS_VOLT,
TARGETING::ATTR_VMEM_ID>(
pMembuf,
io_request);
}
if (membufTargetList.size() > 1)
{
// Take out the duplicate records in io_request by first
// sorting and then removing the duplicates
std::sort(io_request.begin(), io_request.end(), compareVids);
std::vector<hwsvPowrMemVoltDomainRequest_t>::iterator
pInvalidEntries = std::unique(
io_request.begin(),
io_request.end(),
areVidsEqual);
io_request.erase(pInvalidEntries,io_request.end());
}
if( ( (i_requestType == HB_VDDR_ENABLE) ||
(i_requestType == HB_VDDR_POST_DRAM_INIT_ENABLE) )
&& (!membufTargetList.empty()) )
{
// Inhibit sending any request to turn on a domain with no voltage.
// When disabling we don't need to do this because the voltage is
// ignored.
io_request.erase(
std::remove_if(io_request.begin(), io_request.end(),
isUnusedVoltageDomain),io_request.end());
}
} while(0);
TRACFCOMP( g_trac_volt, EXIT_MRK "HBVddrMsg::createVddrData" );
return;
}
//******************************************************************************
// fenceAttachedMembufs - helper function for hwp proc_cen_ref_clk_enable
//******************************************************************************
void fenceAttachedMembufs( TARGETING::Target * i_procTarget )
{
errlHndl_t l_errl = NULL;
TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
"Fencing attached (present) membuf chips downstream from "
"proc chip with HUID of 0x%08X",
i_procTarget->getAttr<TARGETING::ATTR_HUID>());
// Get list of membuf chips downstream from the given proc chip
TARGETING::TargetHandleList MembufChipList;
getChildAffinityTargetsByState( MembufChipList,
const_cast<TARGETING::Target*>(i_procTarget ),
TARGETING::CLASS_CHIP,
TARGETING::TYPE_MEMBUF,
TARGETING::UTIL_FILTER_PRESENT);
// loop through the membufs
for(TARGETING::TargetHandleList::const_iterator pTargetItr
= MembufChipList.begin();
pTargetItr != MembufChipList.end();
pTargetItr++)
{
//Get CFAM "1012" -- FSI GP3 and set bits 23-27 (various fence bits)
//Note 1012 is ecmd addressing, real address is 0x1048 (byte)
uint64_t l_addr = 0x1048;
const uint32_t l_fence_bits= 0x000001F0;
uint32_t l_data = 0;
size_t l_size = sizeof(uint32_t);
l_errl = deviceRead(*pTargetItr,
&l_data,
l_size,
DEVICE_FSI_ADDRESS(l_addr));
if (l_errl)
{
TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
"Failed getcfam 1012 to HUID 0x%08X, ignoring, skipping",
(*pTargetItr)->getAttr<TARGETING::ATTR_HUID>());
delete l_errl;
l_errl = NULL;
continue;
}
l_data |= l_fence_bits;
l_errl = deviceWrite(*pTargetItr,
&l_data,
l_size,
DEVICE_FSI_ADDRESS(l_addr));
if (l_errl)
{
TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
"Failed putcfam 1012 to HUID 0x%08X, ignoring, skipping",
(*pTargetItr)->getAttr<TARGETING::ATTR_HUID>());
delete l_errl;
l_errl = NULL;
continue;
}
}
}
//******************************************************************************
// getMembufsAttachedBitMask - helper function for hwp proc_cen_ref_clk_enable
//******************************************************************************
uint8_t getMembufsAttachedBitMask( TARGETING::Target * i_procTarget )
{
const uint8_t MCS_WITH_ATTACHED_CENTAUR_MASK = 0x80;
TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
"Finding functional membuf chips downstream from "
"proc chip with HUID of 0x%08X",
i_procTarget->getAttr<TARGETING::ATTR_HUID>());
uint8_t l_attachedMembufs = 0;
// Get list of functional membuf chips downstream from the given
// proc chip
TARGETING::TargetHandleList functionalMembufChipList;
getChildAffinityTargets( functionalMembufChipList,
const_cast<TARGETING::Target*>(i_procTarget ),
TARGETING::CLASS_CHIP,
TARGETING::TYPE_MEMBUF,
true);
// loop through the functional membufs
for(TARGETING::TargetHandleList::const_iterator pTargetItr
= functionalMembufChipList.begin();
pTargetItr != functionalMembufChipList.end();
pTargetItr++)
{
// Find each functional membuf chip's upstream functional MCS
// unit, if any, and accumulate it into the attached membuf
// chips mask
TARGETING::TargetHandleList functionalMcsUnitList;
getParentAffinityTargets( functionalMcsUnitList, *pTargetItr,
TARGETING::CLASS_UNIT, TARGETING::TYPE_MCS,
true );
if(functionalMcsUnitList.empty())
{
TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
"Functional membuf chip with HUID of 0x%08X "
"is not attached to an upstream functional MCS",
(*pTargetItr)->getAttr<
TARGETING::ATTR_HUID>());
continue;
}
TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
"Found functional MCS unit with HUID of 0x%08X "
"upstream from functional membuf chip with HUID of 0x%08X",
((*functionalMcsUnitList.begin())->getAttr<
TARGETING::ATTR_CHIP_UNIT>()),
(*pTargetItr)->getAttr<
TARGETING::ATTR_HUID>());
l_attachedMembufs |=
((MCS_WITH_ATTACHED_CENTAUR_MASK) >>
((*functionalMcsUnitList.begin())->getAttr<
TARGETING::ATTR_CHIP_UNIT>()));
}
TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
"Proc chip with HUID of 0x%08X has attached membuf "
"mask (l_attachedMembufs) of 0x%02X",
i_procTarget->getAttr<TARGETING::ATTR_HUID>(),
l_attachedMembufs);
// return the bitmask
return l_attachedMembufs;
}
//******************************************************************************
// call_proc_cen_ref_clock_enable
//******************************************************************************
void* call_proc_cen_ref_clk_enable(void *io_pArgs )
{
errlHndl_t l_errl = NULL;
IStepError l_stepError;
TRACDCOMP( ISTEPS_TRACE::g_trac_isteps_trace,
"call_proc_cen_ref_clock_enable enter" );
TARGETING::TargetHandleList functionalProcChipList;
getAllChips(functionalProcChipList, TYPE_PROC, true);
// loop thru the list of processors
for (TargetHandleList::const_iterator
l_proc_iter = functionalProcChipList.begin();
l_proc_iter != functionalProcChipList.end();
++l_proc_iter)
{
TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
"target HUID %.8X",
TARGETING::get_huid( *l_proc_iter ));
uint8_t l_membufsAttached = 0;
// get a bit mask of present/functional dimms assocated with
// this processor
l_membufsAttached = getMembufsAttachedBitMask( *l_proc_iter );
//Perform a workaround for GA1 to raise fences on centaurs
//to prevent FSP from analyzing if HB TIs for recoverable
//errors
//RTC 106276
fenceAttachedMembufs( *l_proc_iter );
TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
"passing target HUID %.8X and 0x%x mask",
TARGETING::get_huid( *l_proc_iter ), l_membufsAttached );
if( l_membufsAttached )
{
fapi::Target l_fapiProcTarget( fapi::TARGET_TYPE_PROC_CHIP,
*l_proc_iter );
// Invoke the HWP passing in the proc target and
// a bit mask indicating connected centaurs
FAPI_INVOKE_HWP(l_errl,
proc_cen_ref_clk_enable,
l_fapiProcTarget, l_membufsAttached );
if (l_errl)
{
TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
"ERROR : proc_cen_ref_clk_enable",
"failed, returning errorlog" );
// capture the target data in the elog
ErrlUserDetailsTarget( *l_proc_iter ).addToLog( l_errl );
// Create IStep error log and cross ref error that occurred
l_stepError.addErrorDetails( l_errl );
// Commit error log
errlCommit( l_errl, HWPF_COMP_ID );
}
else
{
TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
"SUCCESS : proc_cen_ref_clk_enable",
"completed ok");
}
}
} // endfor
TRACDCOMP( ISTEPS_TRACE::g_trac_isteps_trace,
"call_proc_cen_ref_clock_enable exit" );
// end task, returning any errorlogs to IStepDisp
return l_stepError.getErrorHandle();
}
// ------------------------------------------------------------------
// dimmPresenceDetect
// ------------------------------------------------------------------
errlHndl_t dimmPresenceDetect( DeviceFW::OperationType i_opType,
TARGETING::Target * i_target,
void * io_buffer,
size_t & io_buflen,
int64_t i_accessType,
va_list i_args )
{
errlHndl_t err = NULL;
bool present = false;
size_t presentSz = sizeof(present);
TRACSSCOMP( g_trac_spd,
ENTER_MRK"dimmPresenceDetect()" );
do
{
// Check to be sure that the buffer is big enough.
if( !(io_buflen >= sizeof(bool)) )
{
TRACFCOMP( g_trac_spd,
ERR_MRK"dimmPresenceDetect() - Invalid Data Length: %d",
io_buflen );
/*@
* @errortype
* @reasoncode VPD::VPD_INSUFFICIENT_BUFFER_SIZE
* @severity ERRORLOG::ERRL_SEV_UNRECOVERABLE
* @moduleid VPD::VPD_SPD_PRESENCE_DETECT
* @userdata1 Buffer Length
* @userdata2 <UNUSED>
* @devdesc Buffer for checking Presence Detect
* was not the correct size.
*/
err = new ERRORLOG::ErrlEntry( ERRORLOG::ERRL_SEV_UNRECOVERABLE,
VPD::VPD_SPD_PRESENCE_DETECT,
VPD::VPD_INSUFFICIENT_BUFFER_SIZE,
TO_UINT64(io_buflen),
0x0,
true /*Add HB Software Callout*/);
err->collectTrace( "SPD", 256);
break;
}
// Is the target present
#ifdef CONFIG_DJVPD_READ_FROM_HW
// Check if the parent MBA/MEMBUF is present. If it is not then
// no reason to check the DIMM which would otherwise generate
// tons of FSI errors. We can't just check if parent MBA
// is functional because DIMM presence detect is called before
// the parent MBA/MEMBUF is set as present/functional.
TARGETING::TargetHandleList membufList;
TARGETING::PredicateCTM membufPred( TARGETING::CLASS_CHIP,
TARGETING::TYPE_MEMBUF );
TARGETING::targetService().getAssociated(
membufList,
i_target,
TARGETING::TargetService::PARENT_BY_AFFINITY,
TARGETING::TargetService::ALL,
&membufPred);
bool parentPresent = false;
const TARGETING::TargetHandle_t membufTarget = *(membufList.begin());
err = deviceRead(membufTarget, &parentPresent, presentSz,
DEVICE_PRESENT_ADDRESS());
if (err)
{
TRACFCOMP(
g_trac_spd,
"Error reading parent MEMBUF present: huid 0x%X DIMM huid 0x%X",
TARGETING::get_huid(membufTarget),
TARGETING::get_huid(i_target) );
break;
}
if (!parentPresent)
{
present = false;
// Invalidate the SPD in PNOR
err = VPD::invalidatePnorCache(i_target);
if (err)
{
TRACFCOMP( g_trac_spd, "Error invalidating SPD in PNOR" );
}
break;
}
#endif
present = spdPresent( i_target );
if( present == false )
{
TRACUCOMP( g_trac_spd,
INFO_MRK"Dimm was found to be NOT present." );
}
else
{
TRACUCOMP( g_trac_spd,
INFO_MRK"Dimm was found to be present." );
}
#if defined(CONFIG_DJVPD_READ_FROM_HW) && defined(CONFIG_DJVPD_READ_FROM_PNOR)
if( present )
{
// Check if the VPD data in the PNOR matches the SEEPROM
err = VPD::ensureCacheIsInSync( i_target );
if( err )
{
present = false;
TRACFCOMP(g_trac_spd,ERR_MRK "dimmPresenceDetectt> Error during ensureCacheIsInSync (SPD)" );
break;
}
}
else
{
// SPD is not present, invalidate the SPD in PNOR
err = VPD::invalidatePnorCache(i_target);
if (err)
{
TRACFCOMP( g_trac_spd, "Error invalidating SPD in PNOR" );
}
}
#endif
if( present && !err )
{
//Fsp sets PN/SN so if there is none, do it here
if(!INITSERVICE::spBaseServicesEnabled())
{
//populate serial and part number attributes
SPD::setPartAndSerialNumberAttributes( i_target );
}
// Read ATTR_CLEAR_DIMM_SPD_ENABLE attribute
TARGETING::Target* l_sys = NULL;
TARGETING::targetService().getTopLevelTarget(l_sys);
TARGETING::ATTR_CLEAR_DIMM_SPD_ENABLE_type l_clearSPD =
l_sys->getAttr<TARGETING::ATTR_CLEAR_DIMM_SPD_ENABLE>();
// If SPD clear is enabled then write 0's into magic word for
// DIMM_BAD_DQ_DATA keyword
// Note: If there's an error from performing the clearing,
// just log the error and continue.
if (l_clearSPD)
{
size_t l_size = 0;
// Do a read to get the DIMM_BAD_DQ_DATA keyword size
err = deviceRead(i_target, NULL, l_size,
DEVICE_SPD_ADDRESS( DIMM_BAD_DQ_DATA ));
if (err)
{
TRACFCOMP(g_trac_spd, "dimmPresenceDetect - "
"Error reading DIMM_BAD_DQ_DATA keyword size");
errlCommit( err, VPD_COMP_ID );
}
else
{
// Clear the data
TRACFCOMP( g_trac_spd, "Clearing out BAD_DQ_DATA SPD on "
"DIMM HUID 0x%X",
TARGETING::get_huid(i_target));
uint8_t * l_data = static_cast<uint8_t*>(malloc( l_size ));
memset(l_data, 0, l_size);
err = deviceWrite(i_target, l_data, l_size,
DEVICE_SPD_ADDRESS( DIMM_BAD_DQ_DATA ));
if (err)
{
TRACFCOMP( g_trac_spd, "Error trying to clear SPD on "
"DIMM HUID 0x%X",
TARGETING::get_huid(i_target));
errlCommit( err, VPD_COMP_ID );
}
// Free the memory
if (NULL != l_data)
{
free(l_data);
}
}
}
}
// copy present value into output buffer so caller can read it
memcpy( io_buffer, &present, presentSz );
io_buflen = presentSz;
} while( 0 );
TRACSSCOMP( g_trac_spd,
EXIT_MRK"dimmPresenceDetect()" );
return err;
} // end dimmPresenceDetect
errlHndl_t initiateDrtm()
{
SB_ENTER("initiateDrtm");
errlHndl_t pError = nullptr;
// For DRTM, the thread has to be pinned to a core (and therefore pinned to
// a chip)
task_affinity_pin();
void* drtmPayloadVirtAddr = nullptr;
do
{
const std::vector<SECUREBOOT::ProcSecurity> LLP {
SECUREBOOT::ProcSecurity::LLPBit,
};
const std::vector<SECUREBOOT::ProcSecurity> LLS {
SECUREBOOT::ProcSecurity::LLSBit,
};
// Determine which fabric group and chip this task is executing on and
// create a filter to find the matching chip target
auto cpuId = task_getcpuid();
auto groupId = PIR_t::groupFromPir(cpuId);
auto chipId = PIR_t::chipFromPir(cpuId);
TARGETING::PredicateAttrVal<TARGETING::ATTR_FABRIC_GROUP_ID>
matchesGroup(groupId);
TARGETING::PredicateAttrVal<TARGETING::ATTR_FABRIC_CHIP_ID>
matchesChip(chipId);
TARGETING::PredicatePostfixExpr matchesGroupAndChip;
matchesGroupAndChip.push(&matchesGroup).push(&matchesChip).And();
// Get all the functional proc chips and find the chip we're running on
TARGETING::TargetHandleList funcProcChips;
TARGETING::getAllChips(funcProcChips,
TARGETING::TYPE_PROC);
if(funcProcChips.empty())
{
// TODO: RTC 167205: GA error handling
assert(false,"initiateDrtm: BUG! Functional proc chips is empty, "
"yet this code is running on a functional chip!");
break;
}
// NOTE: std::find_if requires predicates to be copy constructable, but
// predicates are not; hence use a wrapper lambda function to bypass
// that limitation
auto pMatch =
std::find_if(funcProcChips.begin(),funcProcChips.end(),
[&matchesGroupAndChip] ( TARGETING::Target* pTarget )
{
return matchesGroupAndChip(pTarget);
} );
if(pMatch == funcProcChips.end())
{
// TODO: RTC 167205: GA error handling
assert(false, "initiateDrtm: BUG! No functional chip found "
"to be running this code");
break;
}
// Move the matching target to the end of the list.
// NOTE: If reverse iterators were supported, we could have verified the
// last element of the container is not the match, and done a
// std::iter_swap of the match and the last element
TARGETING::Target* const pMatchTarget = *pMatch;
funcProcChips.erase(pMatch);
funcProcChips.push_back(pMatchTarget);
// Map to the DRTM payload area in mainstore
const uint32_t drtmPayloadPhysAddrMb = DRTM_RIT_PAYLOAD_PHYS_ADDR_MB;
drtmPayloadVirtAddr = mm_block_map(
reinterpret_cast<void*>(drtmPayloadPhysAddrMb*BYTES_PER_MEGABYTE),
PAGESIZE);
if(drtmPayloadVirtAddr == nullptr)
{
// TODO: RTC 167205: GA error handling
assert(false, "initiateDrtm: BUG! Failed in call to mm_block_map "
"to map the DRTM payload.");
break;
}
// Copy the DRTM payload to the DRTM payload area
memcpy(
reinterpret_cast<uint32_t*>(drtmPayloadVirtAddr),
DRTM_RIT_PAYLOAD,
sizeof(DRTM_RIT_PAYLOAD));
// The required generic sequencing to initiate DRTM is as follows:
// 1) Initiating task must pin itself to a core (to ensure it
// will not be accidentally queisced by SBE)
// 2) It must set the DRTM payload information in the master processor
// mailbox scratch registers (registers 7 and 8) before it goes
// offline
// 3) It must determine the processor it's currently running on
// 4) It must set the late launch bit (LL) on all other processors
// 4a) If the given processor is an active master, it must set
// late launch primary (LLP) bit
// 4b) Otherwise it must set late launch secondary (LLS) bit
// 5) Finally, it must its own processor's LL bit last, according to the
// rules of step 4.
for(auto &pFuncProc :funcProcChips)
{
const auto procMasterType = pFuncProc->getAttr<
TARGETING::ATTR_PROC_MASTER_TYPE>();
// If master chip, set the DRTM payload address and validity
if(procMasterType == TARGETING::PROC_MASTER_TYPE_ACTING_MASTER)
{
(void)setDrtmPayloadPhysAddrMb(drtmPayloadPhysAddrMb);
}
pError = SECUREBOOT::setSecuritySwitchBits(procMasterType ==
TARGETING::PROC_MASTER_TYPE_ACTING_MASTER ?
LLP : LLS,
pFuncProc);
if(pError)
{
SB_ERR("initiateDrtm: setSecuritySwitchBits() failed for proc "
"= 0x%08X. Tried to set LLP or LLS.",
get_huid(pFuncProc));
break;
}
}
if(pError)
{
break;
}
SB_INF("initiateDrtm: SBE should eventually quiesce all cores; until "
"then, endlessly yield the task");
while(1)
{
task_yield();
}
} while(0);
// If we -do- come back from this function (on error path only), then we
// should unpin
task_affinity_unpin();
if(drtmPayloadVirtAddr)
{
auto rc = mm_block_unmap(const_cast<void*>(drtmPayloadVirtAddr));
if(rc != 0)
{
// TODO: RTC 167205: GA error handling
assert(false,"initiateDrtm: BUG! mm_block_unmap failed for virtual "
"address 0x%16llX.",
drtmPayloadVirtAddr);
}
}
if(pError)
{
SB_ERR("initiateDrtm: plid=0x%08X, eid=0x%08X, reason=0x%04X",
ERRL_GETPLID_SAFE(pError),
ERRL_GETEID_SAFE(pError),
ERRL_GETRC_SAFE(pError));
}
SB_EXIT("initiateDrtm");
return pError;
}