예제 #1
0
파일: ultralcd.cpp 프로젝트: 3dita/Falla3D
void lcd_sdcard_menu()
{
    uint16_t fileCnt = card.getnrfilenames();
    START_MENU();
    MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
    card.getWorkDirName();
    if(card.filename[0]=='/')
    {
#if SDCARDDETECT == -1
        MENU_ITEM(function, LCD_STR_REFRESH MSG_REFRESH, lcd_sd_refresh);
#endif
    }else{
        MENU_ITEM(function, LCD_STR_FOLDER "..", lcd_sd_updir);
    }
    
    for(uint16_t i=0;i<fileCnt;i++)
    {
        if (_menuItemNr == _lineNr)
        {
            card.getfilename(i);
            if (card.filenameIsDir)
            {
                MENU_ITEM(sddirectory, MSG_CARD_MENU, card.filename, card.longFilename);
            }else{
                MENU_ITEM(sdfile, MSG_CARD_MENU, card.filename, card.longFilename);
            }
        }else{
            MENU_ITEM_DUMMY();
        }
    }
    END_MENU();
}
예제 #2
0
파일: ultralcd.cpp 프로젝트: 3dita/Falla3D
static void lcd_control_motion_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
    MENU_ITEM_EDIT(float5, MSG_ACC, &acceleration, 500, 99000);
    MENU_ITEM_EDIT(float3, MSG_VXY_JERK, &max_xy_jerk, 1, 990);
    MENU_ITEM_EDIT(float52, MSG_VZ_JERK, &max_z_jerk, 0.1, 990);
    MENU_ITEM_EDIT(float3, MSG_VE_JERK, &max_e_jerk, 1, 990);
    MENU_ITEM_EDIT(float3, MSG_VMAX MSG_X, &max_feedrate[X_AXIS], 1, 999);
    MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Y, &max_feedrate[Y_AXIS], 1, 999);
    MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Z, &max_feedrate[Z_AXIS], 1, 999);
    MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E, &max_feedrate[E_AXIS], 1, 999);
    MENU_ITEM_EDIT(float3, MSG_VMIN, &minimumfeedrate, 0, 999);
    MENU_ITEM_EDIT(float3, MSG_VTRAV_MIN, &mintravelfeedrate, 0, 999);
    MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_X, &max_acceleration_units_per_sq_second[X_AXIS], 100, 99000, reset_acceleration_rates);
    MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Y, &max_acceleration_units_per_sq_second[Y_AXIS], 100, 99000, reset_acceleration_rates);
    MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Z, &max_acceleration_units_per_sq_second[Z_AXIS], 100, 99000, reset_acceleration_rates);
    MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &max_acceleration_units_per_sq_second[E_AXIS], 100, 99000, reset_acceleration_rates);
    MENU_ITEM_EDIT(float5, MSG_A_RETRACT, &retract_acceleration, 100, 99000);
    MENU_ITEM_EDIT(float52, MSG_XSTEPS, &axis_steps_per_unit[X_AXIS], 5, 9999);
    MENU_ITEM_EDIT(float52, MSG_YSTEPS, &axis_steps_per_unit[Y_AXIS], 5, 9999);
    MENU_ITEM_EDIT(float51, MSG_ZSTEPS, &axis_steps_per_unit[Z_AXIS], 5, 9999);
    MENU_ITEM_EDIT(float51, MSG_ESTEPS, &axis_steps_per_unit[E_AXIS], 5, 9999);    
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
    MENU_ITEM_EDIT(bool, "Endstop abort", &abort_on_endstop_hit);
#endif
    END_MENU();
}
예제 #3
0
  void lcd_mixer_edit_gradient_menu() {
    START_MENU();
    MENU_BACK(MSG_MIXER);

    MENU_ITEM_EDIT_CALLBACK(int8, MSG_START_VTOOL, &mixer.gradient.start_vtool, 0, MIXING_VIRTUAL_TOOLS - 1, mixer.refresh_gradient);
    MENU_ITEM_EDIT_CALLBACK(int8, MSG_END_VTOOL, &mixer.gradient.end_vtool, 0, MIXING_VIRTUAL_TOOLS - 1, mixer.refresh_gradient);

    #if ENABLED(GRADIENT_VTOOL)
      MENU_ITEM_EDIT_CALLBACK(int8, MSG_GRADIENT_ALIAS, &mixer.gradient.vtool_index, 0, MIXING_VIRTUAL_TOOLS - 1, mixer.refresh_gradient);
    #endif

    char tmp[10];

    MENU_ITEM(submenu, MSG_START_Z ":", lcd_mixer_gradient_z_start_edit);
    MENU_ITEM_ADDON_START(9);
      sprintf_P(tmp, PSTR("%4d.%d mm"), int(mixer.gradient.start_z), int(mixer.gradient.start_z * 10) % 10);
      LCDPRINT(tmp);
    MENU_ITEM_ADDON_END();

    MENU_ITEM(submenu, MSG_END_Z ":", lcd_mixer_gradient_z_end_edit);
    MENU_ITEM_ADDON_START(9);
      sprintf_P(tmp, PSTR("%4d.%d mm"), int(mixer.gradient.end_z), int(mixer.gradient.end_z * 10) % 10);
      LCDPRINT(tmp);
    MENU_ITEM_ADDON_END();

    END_MENU();
  }
예제 #4
0
static void lcd_prepare_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
#ifdef SDSUPPORT
    #ifdef MENU_ADDAUTOSTART
      MENU_ITEM(function, MSG_AUTOSTART, lcd_autostart_sd);
    #endif
#endif
    MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84"));
    MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
    //MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0"));
    MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla);
    MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs);
    MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);
#if PS_ON_PIN > -1
    if (powersupply)
    {
        MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81"));
    }else{
        MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80"));
    }
#endif
    MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu);
    END_MENU();
}
예제 #5
0
static void lcd_tune_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
    MENU_ITEM_EDIT(int3, MSG_SPEED, &feedmultiply, 10, 999);
    MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
#if TEMP_SENSOR_1 != 0
    MENU_ITEM_EDIT(int3, MSG_NOZZLE1, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_2 != 0
    MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_BED != 0
    MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
#endif
    MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
    MENU_ITEM_EDIT(int3, MSG_FLOW, &extrudemultiply, 10, 999);

#ifdef BABYSTEPPING
    #ifdef BABYSTEP_XY
      MENU_ITEM(submenu, MSG_BABYSTEP_X, lcd_babystep_x);
      MENU_ITEM(submenu, MSG_BABYSTEP_Y, lcd_babystep_y);
    #endif //BABYSTEP_XY
    MENU_ITEM(submenu, MSG_BABYSTEP_Z, lcd_babystep_z);
#endif
#ifdef FILAMENTCHANGEENABLE
     MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600"));
#endif
    END_MENU();
}
예제 #6
0
 void menu_preheat_m2() {
   START_MENU();
   MENU_BACK(MSG_TEMPERATURE);
   #if HOTENDS == 1
     #if HAS_HEATED_BED
       MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0);
       MENU_ITEM(function, MSG_PREHEAT_2_END, lcd_preheat_m2_e0_only);
     #else
       MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0_only);
     #endif
   #elif HOTENDS > 1
     #if HAS_HEATED_BED
       MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H1, lcd_preheat_m2_e0);
       MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E1, lcd_preheat_m2_e0_only);
       MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H2, lcd_preheat_m2_e1);
       MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E2, lcd_preheat_m2_e1_only);
     #else
       MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H1, lcd_preheat_m2_e0_only);
       MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H2, lcd_preheat_m2_e1_only);
     #endif
     #if HOTENDS > 2
       #if HAS_HEATED_BED
         MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H3, lcd_preheat_m2_e2);
         MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E3, lcd_preheat_m2_e2_only);
       #else
         MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H3, lcd_preheat_m2_e2_only);
       #endif
       #if HOTENDS > 3
         #if HAS_HEATED_BED
           MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H4, lcd_preheat_m2_e3);
           MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E4, lcd_preheat_m2_e3_only);
         #else
           MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H4, lcd_preheat_m2_e3_only);
         #endif
         #if HOTENDS > 4
           #if HAS_HEATED_BED
             MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H5, lcd_preheat_m2_e4);
             MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E5, lcd_preheat_m2_e4_only);
           #else
             MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H5, lcd_preheat_m2_e4_only);
           #endif
           #if HOTENDS > 5
             #if HAS_HEATED_BED
               MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H6, lcd_preheat_m2_e5);
               MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E6, lcd_preheat_m2_e5_only);
             #else
               MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H6, lcd_preheat_m2_e5_only);
             #endif
           #endif // HOTENDS > 5
         #endif // HOTENDS > 4
       #endif // HOTENDS > 3
     #endif // HOTENDS > 2
     MENU_ITEM(function, MSG_PREHEAT_2_ALL, lcd_preheat_m2_all);
   #endif // HOTENDS > 1
   #if HAS_HEATED_BED
     MENU_ITEM(function, MSG_PREHEAT_2_BEDONLY, lcd_preheat_m2_bedonly);
   #endif
   END_MENU();
 }
예제 #7
0
static void lcd_calibrate_bed_menu()
{
 START_MENU();
    MENU_ITEM(back, MSG_HERRAMIENTAS, lcd_herramientas_menu);
    MENU_ITEM(submenu, MSG_CAL_PLA, lcd_cal_pla);
    MENU_ITEM(submenu, MSG_CAL_ABS, lcd_cal_abs);
    END_MENU(); 
}
예제 #8
0
static void lcd_descargar_filamento_menu()
{
 START_MENU();
    MENU_ITEM(back, MSG_FILAMENTO, lcd_filamento_menu);
    MENU_ITEM(submenu, MSG_FC_PLA, lcd_fd_pla);
    MENU_ITEM(submenu, MSG_FC_ABS, lcd_fd_abs);
	END_MENU(); 
}
예제 #9
0
///i2F
static void lcd_filamento_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
    MENU_ITEM(submenu, MSG_CARGAR_FILAMENTO, lcd_cargar_filamento_menu);
    MENU_ITEM(submenu, MSG_DESCARGAR_FILAMENTO, lcd_descargar_filamento_menu);
	END_MENU(); 
}
예제 #10
0
static void lcd_move_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
    MENU_ITEM(submenu, "Move 10mm", lcd_move_menu_10mm);
    MENU_ITEM(submenu, "Move 1mm", lcd_move_menu_1mm);
    MENU_ITEM(submenu, "Move 0.1mm", lcd_move_menu_01mm);
    END_MENU();
}
예제 #11
0
static void lcd_move_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_MOVE_AXIS, lcd_move_menu_axis);//error1
    MENU_ITEM(submenu, MSG_MOVE_01MM, lcd_move_menu_01mm);
    MENU_ITEM(submenu, MSG_MOVE_1MM, lcd_move_menu_1mm);
	MENU_ITEM(submenu, MSG_MOVE_10MM, lcd_move_menu_10mm);
    //TODO:X,Y,Z,E
    END_MENU();
}
예제 #12
0
void menu_mmu2() {
  START_MENU();
  MENU_BACK(MSG_MAIN);
  MENU_ITEM(submenu, MSG_MMU2_LOAD_FILAMENT, menu_mmu2_loadFilament);
  MENU_ITEM(submenu, MSG_MMU2_LOAD_TO_NOZZLE, menu_mmu2_loadToNozzle);
  MENU_ITEM(submenu, MSG_MMU2_EJECT_FILAMENT, menu_mmu2_ejectFilament);
  MENU_ITEM(function, MSG_MMU2_UNLOAD_FILAMENT, action_mmu2_unloadFilament);
  MENU_ITEM(function, MSG_MMU2_RESET, action_mmu2_reset);
  END_MENU();
}
예제 #13
0
void menu_mmu2_loadToNozzle() {
  START_MENU();
  MENU_BACK(MSG_MMU2_MENU);
  MENU_ITEM(function, MSG_MMU2_FILAMENT0, action_mmu2_loadFilamentToNozzle0);
  MENU_ITEM(function, MSG_MMU2_FILAMENT1, action_mmu2_loadFilamentToNozzle1);
  MENU_ITEM(function, MSG_MMU2_FILAMENT2, action_mmu2_loadFilamentToNozzle2);
  MENU_ITEM(function, MSG_MMU2_FILAMENT3, action_mmu2_loadFilamentToNozzle3);
  MENU_ITEM(function, MSG_MMU2_FILAMENT4, action_mmu2_loadFilamentToNozzle4);
  END_MENU();
}
예제 #14
0
static void lcd_move_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
    MENU_ITEM(submenu, MSG_MOVE_10MM, lcd_move_menu_10mm);
    MENU_ITEM(submenu, MSG_MOVE_1MM, lcd_move_menu_1mm);
    MENU_ITEM(submenu, MSG_MOVE_01MM, lcd_move_menu_01mm);
    //TODO:X,Y,Z,E
    END_MENU();
}
예제 #15
0
void menu_mmu2_ejectFilament() {
  START_MENU();
  MENU_BACK(MSG_MMU2_MENU);
  MENU_ITEM(function, MSG_MMU2_FILAMENT0, action_mmu2_ejectFilament0);
  MENU_ITEM(function, MSG_MMU2_FILAMENT1, action_mmu2_ejectFilament1);
  MENU_ITEM(function, MSG_MMU2_FILAMENT2, action_mmu2_ejectFilament2);
  MENU_ITEM(function, MSG_MMU2_FILAMENT3, action_mmu2_ejectFilament3);
  MENU_ITEM(function, MSG_MMU2_FILAMENT4, action_mmu2_ejectFilament4);
  END_MENU();
}
예제 #16
0
//Rapduch------------- Hysteresis
static void lcd_hysteresis_menu()
{
	
	START_MENU();
	MENU_ITEM(back, MSG_MOTION, lcd_control_motion_menu);
	MENU_ITEM(function, MSG_HYST_CIRCLES, update_hysteresis_circles);
	MENU_ITEM_EDIT(float52, MSG_HYST_MANUAL_X,&menu_hysteresis_X,0.00,5);
	MENU_ITEM_EDIT(float52, MSG_HYST_MANUAL_Y,&menu_hysteresis_Y,0.00,5);
	MENU_ITEM(function,MSG_HYST_OFF,update_hysteresis_off);
	END_MENU();
}
예제 #17
0
////i1
static void lcd_tune_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
    MENU_ITEM_EDIT(int3, MSG_SPEED, &feedmultiply, 10, 999);
    MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 5);
    MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
    MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
	MENU_ITEM_EDIT(int3, MSG_FLOW, &extrudemultiply, 10, 999);
    END_MENU();
}
예제 #18
0
static void lcd_laser_test_fire_menu() {
	START_MENU();
	MENU_ITEM(back, "Laser Functions", lcd_laser_menu);
        #ifdef MUVE_Z_PEEL
          MENU_ITEM(function, "100%   30s", action_laser_test_100_30000ms);
        #endif
	MENU_ITEM(function, " 20%  50ms", action_laser_test_20_50ms);
	MENU_ITEM(function, " 20% 100ms", action_laser_test_20_100ms);
	MENU_ITEM(function, "100%  50ms", action_laser_test_100_50ms);
	MENU_ITEM(function, "100% 100ms", action_laser_test_100_100ms);
	END_MENU();
}
예제 #19
0
static void lcd_control_retract_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
    MENU_ITEM_EDIT(bool, MSG_AUTORETRACT, &autoretract_enabled);
    MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT, &retract_length, 0, 100);
    MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &retract_feedrate, 1, 999);
    MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_ZLIFT, &retract_zlift, 0, 999);
    MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER, &retract_recover_length, 0, 100);
    MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &retract_recover_feedrate, 1, 999);
    END_MENU();
}
예제 #20
0
static void lcd_precalentar_menu() 
{
    START_MENU();
    MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
#if TEMP_SENSOR_0 != 0
    MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla0);
    MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs0);
//	MENU_ITEM(function, MSG_PREHEAT_FLEX, lcd_preheat_flex0);
  #endif
#endif
END_MENU();
}
예제 #21
0
static void lcd_herramientas_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
	MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu);//1
    MENU_ITEM(submenu, MSG_CALIBRATE_BED, lcd_calibrate_bed_menu);//2
	MENU_ITEM(submenu, MSG_TEMP_CONFIG, lcd_temp_config_menu);//3
	MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);//4
	MENU_ITEM(function, MSG_AUTO_HOME, lcd_home_all);//5
	MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M18"));//6
    END_MENU();
}
예제 #22
0
void menu_mmu2_advanced_pause() {
  currentTool = mmu2.getCurrentTool();
  START_MENU();
  #if LCD_HEIGHT > 2
    STATIC_ITEM(MSG_MMU2_FILAMENT_CHANGE_HEADER, true, true);
  #endif
  MENU_ITEM(function, MSG_MMU2_RESUME, action_mmu2_M600_resume);
  MENU_ITEM(function, MSG_MMU2_UNLOAD_FILAMENT, action_mmu2_M600_unloadFilament);
  MENU_ITEM(function, MSG_MMU2_LOAD_FILAMENT, action_mmu2_M600_loadCurrentFilament);
  MENU_ITEM(function, MSG_MMU2_LOAD_TO_NOZZLE, action_mmu2_M600_loadCurrentFilamentToNozzle);
  END_MENU();
}
예제 #23
0
void menu_mmu2_chooseFilament() {
  START_MENU();
  #if LCD_HEIGHT > 2
    STATIC_ITEM(MSG_MMU2_CHOOSE_FILAMENT_HEADER, true, true);
  #endif
  MENU_ITEM(function, MSG_MMU2_FILAMENT0, action_mmu2_choose0);
  MENU_ITEM(function, MSG_MMU2_FILAMENT1, action_mmu2_choose1);
  MENU_ITEM(function, MSG_MMU2_FILAMENT2, action_mmu2_choose2);
  MENU_ITEM(function, MSG_MMU2_FILAMENT3, action_mmu2_choose3);
  MENU_ITEM(function, MSG_MMU2_FILAMENT4, action_mmu2_choose4);
  END_MENU();
}
예제 #24
0
static void lcd_preheat_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_PREPARE, lcd_main_menu);
    MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla);
    MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs);
    MENU_ITEM(function, MSG_PREHEAT_NYLON, lcd_preheat_nylon);
    MENU_ITEM(function, MSG_PREHEAT_PVA, lcd_preheat_pva);
    MENU_ITEM(function, MSG_PREHEAT_LAYWOOD, lcd_preheat_laywood);
    MENU_ITEM(function, MSG_PREHEAT_LAYBRICK, lcd_preheat_laybrick);
    END_MENU();
}
예제 #25
0
static void lcd_laser_focus_menu() {
	START_MENU();
	MENU_ITEM(back, "Laser Functions", lcd_laser_menu);
	MENU_ITEM(function, "1mm", action_laser_focus_1mm);
	MENU_ITEM(function, "2mm", action_laser_focus_2mm);
	MENU_ITEM(function, "3mm - 1/8in", action_laser_focus_3mm);
	MENU_ITEM(function, "4mm", action_laser_focus_4mm);
	MENU_ITEM(function, "5mm", action_laser_focus_5mm);
	MENU_ITEM(function, "6mm - 1/4in", action_laser_focus_6mm);
	MENU_ITEM(function, "7mm", action_laser_focus_7mm);
	MENU_ITEM_EDIT_CALLBACK(float32, "Custom", &focalLength, 0, LASER_FOCAL_HEIGHT, action_laser_focus_custom);
	END_MENU();
}
예제 #26
0
static void lcd_move_menu_axis()
{
    START_MENU();
    MENU_ITEM(back, MSG_MOVE_AXIS, lcd_move_menu);
    MENU_ITEM(submenu, "Move X", lcd_move_x);
    MENU_ITEM(submenu, "Move Y", lcd_move_y);
    if (move_menu_scale < 10.0)
    {
        MENU_ITEM(submenu, "Move Z", lcd_move_z);
        MENU_ITEM(submenu, "Extruder", lcd_move_e);
    }
    END_MENU();
}
예제 #27
0
static void lcd_move_menu_axis()
{
    START_MENU();
    MENU_ITEM(back, MSG_MOVE_AXIS, lcd_move_menu);
    MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_x);
    MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_y);
    if (move_menu_scale < 10.0)
    {
        MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_z);
        MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e);
    }
    END_MENU();
}
예제 #28
0
static void lcd_move_menu_axis()
{
    START_MENU();
    MENU_ITEM(back, MSG_HERRAMIENTAS, lcd_herramientas_menu);
    MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_x);
    MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_y);
    if (move_menu_scale < 10.0)
    {
        MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_z);
        MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e);
    }
    END_MENU();
}
예제 #29
0
void lcd_move_menu_axis()
{
    START_MENU();
    MENU_ITEM(back, MSG_SETTINGS, lcd_settings_menu);
    MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_x);
    MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_y);
    if (move_menu_scale < 10.0)
    {
        MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_z);
        MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e);
    }
    END_MENU();
}
예제 #30
0
static void lcd_control_temperature_preheat_abs_settings_menu()
{
    START_MENU();
    MENU_ITEM(back, MSG_TEMPERATURE, lcd_control_temperature_menu);
    MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &absPreheatFanSpeed, 0, 255);
    MENU_ITEM_EDIT(int3, MSG_NOZZLE, &absPreheatHotendTemp, 0, HEATER_0_MAXTEMP - 15);
#if TEMP_SENSOR_BED != 0
    MENU_ITEM_EDIT(int3, MSG_BED, &absPreheatHPBTemp, 0, BED_MAXTEMP - 15);
#endif
#ifdef EEPROM_SETTINGS
    MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
#endif
    END_MENU();
}