void lcd_sdcard_menu()
{
uint16_t fileCnt = card.getnrfilenames();
START_MENU();
MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
card.getWorkDirName();
if(card.filename[0]=='/')
{
#if SDCARDDETECT == -1
MENU_ITEM(function, LCD_STR_REFRESH MSG_REFRESH, lcd_sd_refresh);
#endif
}else{
MENU_ITEM(function, LCD_STR_FOLDER "..", lcd_sd_updir);
}
for(uint16_t i=0;i<fileCnt;i++)
{
if (_menuItemNr == _lineNr)
{
card.getfilename(i);
if (card.filenameIsDir)
{
MENU_ITEM(sddirectory, MSG_CARD_MENU, card.filename, card.longFilename);
}else{
MENU_ITEM(sdfile, MSG_CARD_MENU, card.filename, card.longFilename);
}
}else{
MENU_ITEM_DUMMY();
}
}
END_MENU();
}
static void lcd_control_motion_menu()
{
START_MENU();
MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
MENU_ITEM_EDIT(float5, MSG_ACC, &acceleration, 500, 99000);
MENU_ITEM_EDIT(float3, MSG_VXY_JERK, &max_xy_jerk, 1, 990);
MENU_ITEM_EDIT(float52, MSG_VZ_JERK, &max_z_jerk, 0.1, 990);
MENU_ITEM_EDIT(float3, MSG_VE_JERK, &max_e_jerk, 1, 990);
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_X, &max_feedrate[X_AXIS], 1, 999);
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Y, &max_feedrate[Y_AXIS], 1, 999);
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Z, &max_feedrate[Z_AXIS], 1, 999);
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E, &max_feedrate[E_AXIS], 1, 999);
MENU_ITEM_EDIT(float3, MSG_VMIN, &minimumfeedrate, 0, 999);
MENU_ITEM_EDIT(float3, MSG_VTRAV_MIN, &mintravelfeedrate, 0, 999);
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_X, &max_acceleration_units_per_sq_second[X_AXIS], 100, 99000, reset_acceleration_rates);
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Y, &max_acceleration_units_per_sq_second[Y_AXIS], 100, 99000, reset_acceleration_rates);
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Z, &max_acceleration_units_per_sq_second[Z_AXIS], 100, 99000, reset_acceleration_rates);
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &max_acceleration_units_per_sq_second[E_AXIS], 100, 99000, reset_acceleration_rates);
MENU_ITEM_EDIT(float5, MSG_A_RETRACT, &retract_acceleration, 100, 99000);
MENU_ITEM_EDIT(float52, MSG_XSTEPS, &axis_steps_per_unit[X_AXIS], 5, 9999);
MENU_ITEM_EDIT(float52, MSG_YSTEPS, &axis_steps_per_unit[Y_AXIS], 5, 9999);
MENU_ITEM_EDIT(float51, MSG_ZSTEPS, &axis_steps_per_unit[Z_AXIS], 5, 9999);
MENU_ITEM_EDIT(float51, MSG_ESTEPS, &axis_steps_per_unit[E_AXIS], 5, 9999);
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
MENU_ITEM_EDIT(bool, "Endstop abort", &abort_on_endstop_hit);
#endif
END_MENU();
}
void lcd_mixer_edit_gradient_menu() {
START_MENU();
MENU_BACK(MSG_MIXER);
MENU_ITEM_EDIT_CALLBACK(int8, MSG_START_VTOOL, &mixer.gradient.start_vtool, 0, MIXING_VIRTUAL_TOOLS - 1, mixer.refresh_gradient);
MENU_ITEM_EDIT_CALLBACK(int8, MSG_END_VTOOL, &mixer.gradient.end_vtool, 0, MIXING_VIRTUAL_TOOLS - 1, mixer.refresh_gradient);
#if ENABLED(GRADIENT_VTOOL)
MENU_ITEM_EDIT_CALLBACK(int8, MSG_GRADIENT_ALIAS, &mixer.gradient.vtool_index, 0, MIXING_VIRTUAL_TOOLS - 1, mixer.refresh_gradient);
#endif
char tmp[10];
MENU_ITEM(submenu, MSG_START_Z ":", lcd_mixer_gradient_z_start_edit);
MENU_ITEM_ADDON_START(9);
sprintf_P(tmp, PSTR("%4d.%d mm"), int(mixer.gradient.start_z), int(mixer.gradient.start_z * 10) % 10);
LCDPRINT(tmp);
MENU_ITEM_ADDON_END();
MENU_ITEM(submenu, MSG_END_Z ":", lcd_mixer_gradient_z_end_edit);
MENU_ITEM_ADDON_START(9);
sprintf_P(tmp, PSTR("%4d.%d mm"), int(mixer.gradient.end_z), int(mixer.gradient.end_z * 10) % 10);
LCDPRINT(tmp);
MENU_ITEM_ADDON_END();
END_MENU();
}
static void lcd_prepare_menu()
{
START_MENU();
MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
#ifdef SDSUPPORT
#ifdef MENU_ADDAUTOSTART
MENU_ITEM(function, MSG_AUTOSTART, lcd_autostart_sd);
#endif
#endif
MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84"));
MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
//MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0"));
MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla);
MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs);
MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);
#if PS_ON_PIN > -1
if (powersupply)
{
MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81"));
}else{
MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80"));
}
#endif
MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu);
END_MENU();
}
static void lcd_tune_menu()
{
START_MENU();
MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
MENU_ITEM_EDIT(int3, MSG_SPEED, &feedmultiply, 10, 999);
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
#if TEMP_SENSOR_1 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE1, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_2 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
#endif
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
MENU_ITEM_EDIT(int3, MSG_FLOW, &extrudemultiply, 10, 999);
#ifdef BABYSTEPPING
#ifdef BABYSTEP_XY
MENU_ITEM(submenu, MSG_BABYSTEP_X, lcd_babystep_x);
MENU_ITEM(submenu, MSG_BABYSTEP_Y, lcd_babystep_y);
#endif //BABYSTEP_XY
MENU_ITEM(submenu, MSG_BABYSTEP_Z, lcd_babystep_z);
#endif
#ifdef FILAMENTCHANGEENABLE
MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600"));
#endif
END_MENU();
}
void menu_preheat_m2() {
START_MENU();
MENU_BACK(MSG_TEMPERATURE);
#if HOTENDS == 1
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0);
MENU_ITEM(function, MSG_PREHEAT_2_END, lcd_preheat_m2_e0_only);
#else
MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0_only);
#endif
#elif HOTENDS > 1
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H1, lcd_preheat_m2_e0);
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E1, lcd_preheat_m2_e0_only);
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H2, lcd_preheat_m2_e1);
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E2, lcd_preheat_m2_e1_only);
#else
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H1, lcd_preheat_m2_e0_only);
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H2, lcd_preheat_m2_e1_only);
#endif
#if HOTENDS > 2
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H3, lcd_preheat_m2_e2);
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E3, lcd_preheat_m2_e2_only);
#else
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H3, lcd_preheat_m2_e2_only);
#endif
#if HOTENDS > 3
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H4, lcd_preheat_m2_e3);
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E4, lcd_preheat_m2_e3_only);
#else
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H4, lcd_preheat_m2_e3_only);
#endif
#if HOTENDS > 4
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H5, lcd_preheat_m2_e4);
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E5, lcd_preheat_m2_e4_only);
#else
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H5, lcd_preheat_m2_e4_only);
#endif
#if HOTENDS > 5
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H6, lcd_preheat_m2_e5);
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E6, lcd_preheat_m2_e5_only);
#else
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H6, lcd_preheat_m2_e5_only);
#endif
#endif // HOTENDS > 5
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
MENU_ITEM(function, MSG_PREHEAT_2_ALL, lcd_preheat_m2_all);
#endif // HOTENDS > 1
#if HAS_HEATED_BED
MENU_ITEM(function, MSG_PREHEAT_2_BEDONLY, lcd_preheat_m2_bedonly);
#endif
END_MENU();
}
static void lcd_calibrate_bed_menu()
{
START_MENU();
MENU_ITEM(back, MSG_HERRAMIENTAS, lcd_herramientas_menu);
MENU_ITEM(submenu, MSG_CAL_PLA, lcd_cal_pla);
MENU_ITEM(submenu, MSG_CAL_ABS, lcd_cal_abs);
END_MENU();
}
static void lcd_descargar_filamento_menu()
{
START_MENU();
MENU_ITEM(back, MSG_FILAMENTO, lcd_filamento_menu);
MENU_ITEM(submenu, MSG_FC_PLA, lcd_fd_pla);
MENU_ITEM(submenu, MSG_FC_ABS, lcd_fd_abs);
END_MENU();
}
///i2F
static void lcd_filamento_menu()
{
START_MENU();
MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
MENU_ITEM(submenu, MSG_CARGAR_FILAMENTO, lcd_cargar_filamento_menu);
MENU_ITEM(submenu, MSG_DESCARGAR_FILAMENTO, lcd_descargar_filamento_menu);
END_MENU();
}
static void lcd_move_menu()
{
START_MENU();
MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
MENU_ITEM(submenu, "Move 10mm", lcd_move_menu_10mm);
MENU_ITEM(submenu, "Move 1mm", lcd_move_menu_1mm);
MENU_ITEM(submenu, "Move 0.1mm", lcd_move_menu_01mm);
END_MENU();
}
static void lcd_move_menu()
{
START_MENU();
MENU_ITEM(back, MSG_MOVE_AXIS, lcd_move_menu_axis);//error1
MENU_ITEM(submenu, MSG_MOVE_01MM, lcd_move_menu_01mm);
MENU_ITEM(submenu, MSG_MOVE_1MM, lcd_move_menu_1mm);
MENU_ITEM(submenu, MSG_MOVE_10MM, lcd_move_menu_10mm);
//TODO:X,Y,Z,E
END_MENU();
}
void menu_mmu2() {
START_MENU();
MENU_BACK(MSG_MAIN);
MENU_ITEM(submenu, MSG_MMU2_LOAD_FILAMENT, menu_mmu2_loadFilament);
MENU_ITEM(submenu, MSG_MMU2_LOAD_TO_NOZZLE, menu_mmu2_loadToNozzle);
MENU_ITEM(submenu, MSG_MMU2_EJECT_FILAMENT, menu_mmu2_ejectFilament);
MENU_ITEM(function, MSG_MMU2_UNLOAD_FILAMENT, action_mmu2_unloadFilament);
MENU_ITEM(function, MSG_MMU2_RESET, action_mmu2_reset);
END_MENU();
}
void menu_mmu2_loadToNozzle() {
START_MENU();
MENU_BACK(MSG_MMU2_MENU);
MENU_ITEM(function, MSG_MMU2_FILAMENT0, action_mmu2_loadFilamentToNozzle0);
MENU_ITEM(function, MSG_MMU2_FILAMENT1, action_mmu2_loadFilamentToNozzle1);
MENU_ITEM(function, MSG_MMU2_FILAMENT2, action_mmu2_loadFilamentToNozzle2);
MENU_ITEM(function, MSG_MMU2_FILAMENT3, action_mmu2_loadFilamentToNozzle3);
MENU_ITEM(function, MSG_MMU2_FILAMENT4, action_mmu2_loadFilamentToNozzle4);
END_MENU();
}
static void lcd_move_menu()
{
START_MENU();
MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
MENU_ITEM(submenu, MSG_MOVE_10MM, lcd_move_menu_10mm);
MENU_ITEM(submenu, MSG_MOVE_1MM, lcd_move_menu_1mm);
MENU_ITEM(submenu, MSG_MOVE_01MM, lcd_move_menu_01mm);
//TODO:X,Y,Z,E
END_MENU();
}
void menu_mmu2_ejectFilament() {
START_MENU();
MENU_BACK(MSG_MMU2_MENU);
MENU_ITEM(function, MSG_MMU2_FILAMENT0, action_mmu2_ejectFilament0);
MENU_ITEM(function, MSG_MMU2_FILAMENT1, action_mmu2_ejectFilament1);
MENU_ITEM(function, MSG_MMU2_FILAMENT2, action_mmu2_ejectFilament2);
MENU_ITEM(function, MSG_MMU2_FILAMENT3, action_mmu2_ejectFilament3);
MENU_ITEM(function, MSG_MMU2_FILAMENT4, action_mmu2_ejectFilament4);
END_MENU();
}
//Rapduch------------- Hysteresis
static void lcd_hysteresis_menu()
{
START_MENU();
MENU_ITEM(back, MSG_MOTION, lcd_control_motion_menu);
MENU_ITEM(function, MSG_HYST_CIRCLES, update_hysteresis_circles);
MENU_ITEM_EDIT(float52, MSG_HYST_MANUAL_X,&menu_hysteresis_X,0.00,5);
MENU_ITEM_EDIT(float52, MSG_HYST_MANUAL_Y,&menu_hysteresis_Y,0.00,5);
MENU_ITEM(function,MSG_HYST_OFF,update_hysteresis_off);
END_MENU();
}
////i1
static void lcd_tune_menu()
{
START_MENU();
MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
MENU_ITEM_EDIT(int3, MSG_SPEED, &feedmultiply, 10, 999);
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 5);
MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
MENU_ITEM_EDIT(int3, MSG_FLOW, &extrudemultiply, 10, 999);
END_MENU();
}
static void lcd_laser_test_fire_menu() {
START_MENU();
MENU_ITEM(back, "Laser Functions", lcd_laser_menu);
#ifdef MUVE_Z_PEEL
MENU_ITEM(function, "100% 30s", action_laser_test_100_30000ms);
#endif
MENU_ITEM(function, " 20% 50ms", action_laser_test_20_50ms);
MENU_ITEM(function, " 20% 100ms", action_laser_test_20_100ms);
MENU_ITEM(function, "100% 50ms", action_laser_test_100_50ms);
MENU_ITEM(function, "100% 100ms", action_laser_test_100_100ms);
END_MENU();
}
static void lcd_control_retract_menu()
{
START_MENU();
MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
MENU_ITEM_EDIT(bool, MSG_AUTORETRACT, &autoretract_enabled);
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT, &retract_length, 0, 100);
MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &retract_feedrate, 1, 999);
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_ZLIFT, &retract_zlift, 0, 999);
MENU_ITEM_EDIT(float52, MSG_CONTROL_RETRACT_RECOVER, &retract_recover_length, 0, 100);
MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &retract_recover_feedrate, 1, 999);
END_MENU();
}
static void lcd_precalentar_menu()
{
START_MENU();
MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
#if TEMP_SENSOR_0 != 0
MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla0);
MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs0);
// MENU_ITEM(function, MSG_PREHEAT_FLEX, lcd_preheat_flex0);
#endif
#endif
END_MENU();
}
static void lcd_herramientas_menu()
{
START_MENU();
MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu);//1
MENU_ITEM(submenu, MSG_CALIBRATE_BED, lcd_calibrate_bed_menu);//2
MENU_ITEM(submenu, MSG_TEMP_CONFIG, lcd_temp_config_menu);//3
MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);//4
MENU_ITEM(function, MSG_AUTO_HOME, lcd_home_all);//5
MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M18"));//6
END_MENU();
}
void menu_mmu2_advanced_pause() {
currentTool = mmu2.getCurrentTool();
START_MENU();
#if LCD_HEIGHT > 2
STATIC_ITEM(MSG_MMU2_FILAMENT_CHANGE_HEADER, true, true);
#endif
MENU_ITEM(function, MSG_MMU2_RESUME, action_mmu2_M600_resume);
MENU_ITEM(function, MSG_MMU2_UNLOAD_FILAMENT, action_mmu2_M600_unloadFilament);
MENU_ITEM(function, MSG_MMU2_LOAD_FILAMENT, action_mmu2_M600_loadCurrentFilament);
MENU_ITEM(function, MSG_MMU2_LOAD_TO_NOZZLE, action_mmu2_M600_loadCurrentFilamentToNozzle);
END_MENU();
}
void menu_mmu2_chooseFilament() {
START_MENU();
#if LCD_HEIGHT > 2
STATIC_ITEM(MSG_MMU2_CHOOSE_FILAMENT_HEADER, true, true);
#endif
MENU_ITEM(function, MSG_MMU2_FILAMENT0, action_mmu2_choose0);
MENU_ITEM(function, MSG_MMU2_FILAMENT1, action_mmu2_choose1);
MENU_ITEM(function, MSG_MMU2_FILAMENT2, action_mmu2_choose2);
MENU_ITEM(function, MSG_MMU2_FILAMENT3, action_mmu2_choose3);
MENU_ITEM(function, MSG_MMU2_FILAMENT4, action_mmu2_choose4);
END_MENU();
}
static void lcd_preheat_menu()
{
START_MENU();
MENU_ITEM(back, MSG_PREPARE, lcd_main_menu);
MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla);
MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs);
MENU_ITEM(function, MSG_PREHEAT_NYLON, lcd_preheat_nylon);
MENU_ITEM(function, MSG_PREHEAT_PVA, lcd_preheat_pva);
MENU_ITEM(function, MSG_PREHEAT_LAYWOOD, lcd_preheat_laywood);
MENU_ITEM(function, MSG_PREHEAT_LAYBRICK, lcd_preheat_laybrick);
END_MENU();
}
static void lcd_laser_focus_menu() {
START_MENU();
MENU_ITEM(back, "Laser Functions", lcd_laser_menu);
MENU_ITEM(function, "1mm", action_laser_focus_1mm);
MENU_ITEM(function, "2mm", action_laser_focus_2mm);
MENU_ITEM(function, "3mm - 1/8in", action_laser_focus_3mm);
MENU_ITEM(function, "4mm", action_laser_focus_4mm);
MENU_ITEM(function, "5mm", action_laser_focus_5mm);
MENU_ITEM(function, "6mm - 1/4in", action_laser_focus_6mm);
MENU_ITEM(function, "7mm", action_laser_focus_7mm);
MENU_ITEM_EDIT_CALLBACK(float32, "Custom", &focalLength, 0, LASER_FOCAL_HEIGHT, action_laser_focus_custom);
END_MENU();
}
static void lcd_move_menu_axis()
{
START_MENU();
MENU_ITEM(back, MSG_MOVE_AXIS, lcd_move_menu);
MENU_ITEM(submenu, "Move X", lcd_move_x);
MENU_ITEM(submenu, "Move Y", lcd_move_y);
if (move_menu_scale < 10.0)
{
MENU_ITEM(submenu, "Move Z", lcd_move_z);
MENU_ITEM(submenu, "Extruder", lcd_move_e);
}
END_MENU();
}
static void lcd_move_menu_axis()
{
START_MENU();
MENU_ITEM(back, MSG_MOVE_AXIS, lcd_move_menu);
MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_x);
MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_y);
if (move_menu_scale < 10.0)
{
MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_z);
MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e);
}
END_MENU();
}
static void lcd_move_menu_axis()
{
START_MENU();
MENU_ITEM(back, MSG_HERRAMIENTAS, lcd_herramientas_menu);
MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_x);
MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_y);
if (move_menu_scale < 10.0)
{
MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_z);
MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e);
}
END_MENU();
}
void lcd_move_menu_axis()
{
START_MENU();
MENU_ITEM(back, MSG_SETTINGS, lcd_settings_menu);
MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_x);
MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_y);
if (move_menu_scale < 10.0)
{
MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_z);
MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e);
}
END_MENU();
}
static void lcd_control_temperature_preheat_abs_settings_menu()
{
START_MENU();
MENU_ITEM(back, MSG_TEMPERATURE, lcd_control_temperature_menu);
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &absPreheatFanSpeed, 0, 255);
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &absPreheatHotendTemp, 0, HEATER_0_MAXTEMP - 15);
#if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &absPreheatHPBTemp, 0, BED_MAXTEMP - 15);
#endif
#ifdef EEPROM_SETTINGS
MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
#endif
END_MENU();
}
