/************************************************************************
* Function Name : hc_parse_trans
*
* This function checks the status of the transmitted or received packet
* and copy the data from the SL811HS register into a buffer.
*
* 1) Check the status of the packet
* 2) If successful, and IN packet then copy the data from the SL811HS register
* into a buffer
*
* Input: hci = data structure for the host controller
* actbytes = pointer to actual number of bytes
* data = data buffer
* cc = packet status
* length = the urb transmit length
* pid = packet ID
* urb_state = the current stage of USB transaction
*
* Return: 0
***********************************************************************/
static inline int hc_parse_trans (hci_t * hci, int *actbytes, __u8 * data,
int *cc, int *toggle, int length, int pid,
int urb_state)
{
__u8 addr;
__u8 len;
DBGFUNC ("enter hc_parse_trans\n");
/* get packet status; convert ack rcvd to ack-not-rcvd */
*cc = (int) SL811Read (hci, SL11H_PKTSTATREG);
if (*cc &
(SL11H_STATMASK_ERROR | SL11H_STATMASK_TMOUT | SL11H_STATMASK_OVF |
SL11H_STATMASK_NAK | SL11H_STATMASK_STALL)) {
if (*cc & SL11H_STATMASK_OVF)
DBGERR ("parse trans: error recv ack, cc = 0x%x, TX_BASE_Len = "
"0x%x, TX_count=0x%x\n", *cc,
SL811Read (hci, SL11H_BUFLNTHREG),
SL811Read (hci, SL11H_XFERCNTREG));
} else {
DBGVERBOSE ("parse trans: recv ack, cc = 0x%x, len = 0x%x, \n",
*cc, length);
/* Successful data */
if ((pid == PID_IN) && (urb_state != US_CTRL_SETUP)) {
/* Find the base address */
addr = SL811Read (hci, SL11H_BUFADDRREG);
/* Find the Transmit Length */
len = SL811Read (hci, SL11H_BUFLNTHREG);
/* The actual data length = xmit length reg - xfer count reg */
*actbytes = len - SL811Read (hci, SL11H_XFERCNTREG);
if ((data != NULL) && (*actbytes > 0)) {
SL811BufRead (hci, addr, data, *actbytes);
} else if ((data == NULL) && (*actbytes <= 0)) {
DBGERR ("hc_parse_trans: data = NULL or actbyte = 0x%x\n",
*actbytes);
return 0;
}
} else if (pid == PID_OUT) {
*actbytes = length;
} else {
// printk ("ERR:parse_trans, pid != IN or OUT, pid = 0x%x\n", pid);
}
*toggle = !*toggle;
}
return 0;
}
//*****************************************************************************************
// usbXfer:
// successful transfer = return TRUE
// fail transfer = return FALSE
//*****************************************************************************************
u_int8 usbXfer(void)
{
u_int8 xferLen, data0, data1,cmd;
u_int8 intr,result,remainder,dataX,bufLen,addr,timeout;
//------------------------------------------------
// Default setting for usb trasnfer
//------------------------------------------------
dataX=timeout=0;
//result = SL811Read(EP0Status);
data0 = EP0_Buf; // DATA0 buffer address
data1 = data0 + ( u_int8)usbstack.wPayload; // DATA1 buffer address
bXXGFlags.DATA_STOP=FALSE;
bXXGFlags.TIMEOUT_ERR=FALSE;
//------------------------------------------------
// Define data transfer payload
//------------------------------------------------
if (usbstack.wLen >= usbstack.wPayload) // select proper data payload
xferLen = usbstack.wPayload; // limit to wPayload size
else // else take < payload len
xferLen = usbstack.wLen; //
// For IN token
if (usbstack.pid==PID_IN) // for current IN tokens
{ //
cmd = sDATA0_RD; // FS/FS on Hub, sync to sof
}
// For OUT token
else if(usbstack.pid==PID_OUT) // for OUT tokens
{
if(xferLen) // only when there are
{
//intr=usbstack.setup.wLength;
//usbstack.setup.wLength=WordSwap(usbstack.setup.wLength);
SL811BufWrite(data0,usbstack.buffer,xferLen); // data to transfer on USB
//usbstack.setup.wLength=intr;
}
cmd = sDATA0_WR; // FS/FS on Hub, sync to sof
// implement data toggle
bXXGFlags.bData1 = uDev.bData1[usbstack.endpoint];
uDev.bData1[usbstack.endpoint] = (uDev.bData1[usbstack.endpoint] ? 0 : 1); // DataToggle
if(bXXGFlags.bData1)
cmd |= 0x40; // Set Data1 bit in command
}
// For SETUP/OUT token
else // for current SETUP/OUT tokens
{
if(xferLen) // only when there are
{
intr=usbstack.setup.wLength;
usbstack.setup.wValue=usbstack.setup.wValue;
usbstack.setup.wIndex=usbstack.setup.wIndex;
usbstack.setup.wLength=usbstack.setup.wLength;
SL811BufWrite(data0,( u_int8 *)&usbstack.setup,xferLen); // data to transfer on USB
usbstack.setup.wLength=intr;
}
cmd = sDATA0_WR; // FS/FS on Hub, sync to sof
}
//------------------------------------------------
// For EP0's IN/OUT token data, start with DATA1
// Control Endpoint0's status stage.
// For data endpoint, IN/OUT data, start ????
//------------------------------------------------
if (usbstack.endpoint == 0 && usbstack.pid != PID_SETUP) // for Ep0's IN/OUT token
cmd |= 0x40; // always set DATA1
//------------------------------------------------
// Arming of USB data transfer for the first pkt
//------------------------------------------------
SL811Write(EP0Status,((usbstack.endpoint&0x0F)|usbstack.pid)); // PID + EP address
SL811Write(EP0Counter,usbstack.usbaddr); // USB address
SL811Write(EP0Address,data0); // buffer address, start with "data0"
SL811Write(EP0XferLen,xferLen); // data transfer length
SL811Write(IntStatus,INT_CLEAR); // clear interrupt status
SL811Write(EP0Control,cmd); // Enable ARM and USB transfer start here
//------------------------------------------------
// Main loop for completing a wLen data trasnfer
//------------------------------------------------
while(TRUE)
{
//---------------Wait for done interrupt------------------
while(TRUE) // always ensure requested device is
{ // inserted at all time, then you will
//intr=SL811Read(cSOFcnt);
//intr=SL811Read(IntEna);
intr = SL811Read(IntStatus);
// wait for interrupt to be done, and
if((intr & USB_DETECT) || (intr & INSERT_REMOVE)) // proceed to parse result from slave
{ // device.
bXXGFlags.DATA_STOP = TRUE; // if device is removed, set DATA_STOP
return FALSE; // flag true, so that main loop will
} // know this condition and exit gracefully
if(intr & USB_A_DONE)
break; // interrupt done !!!
}
SL811Write(IntStatus,INT_CLEAR); // clear interrupt status
result = SL811Read(EP0Status); // read EP0status register
remainder = SL811Read(EP0Counter); // remainder value in last pkt xfer
//-------------------------ACK----------------------------
if (result & EP0_ACK) // Transmission ACK
{
// SETUP TOKEN
if(usbstack.pid == PID_SETUP) // do nothing for SETUP/OUT token
break; // exit while(1) immediately
// OUT TOKEN
else if(usbstack.pid == PID_OUT)
break;
// IN TOKEN
else if(usbstack.pid == PID_IN)
{ // for IN token only
usbstack.wLen -= (WORD)xferLen; // update remainding wLen value
cmd ^= 0x40; // toggle DATA0/DATA1
dataX++; // point to next dataX
//------------------------------------------------
// If host requested for more data than the slave
// have, and if the slave's data len is a multiple
// of its endpoint payload size/last xferLen. Do
// not overwrite data in previous buffer.
//------------------------------------------------
if(remainder==xferLen) // empty data detected
bufLen = 0; // do not overwriten previous data
else // reset bufLen to zero
bufLen = xferLen; // update previous buffer length
//------------------------------------------------
// Arm for next data transfer when requested data
// length have not reach zero, i.e. wLen!=0, and
// last xferlen of data was completed, i.e.
// remainder is equal to zero, not a short pkt
//------------------------------------------------
if(!remainder && usbstack.wLen) // remainder==0 when last xferLen
{ // was all completed or wLen!=0
addr = (dataX & 1) ? data1:data0; // select next address for data
xferLen = (u_int8)(usbstack.wLen>=usbstack.wPayload) ? usbstack.wPayload:usbstack.wLen; // get data length required
//if (FULL_SPEED) // sync with SOF transfer
cmd |= 0x20; // always sync SOF when FS, regardless
SL811Write(EP0XferLen, xferLen); // select next xfer length
SL811Write(EP0Address, addr); // data buffer addr
SL811Write(IntStatus,INT_CLEAR); // is a LS is on Hub.
SL811Write(EP0Control,cmd); // Enable USB transfer and re-arm
}
//------------------------------------------------
// Copy last IN token data pkt from prev transfer
// Check if there was data available during the
// last data transfer
//------------------------------------------------
if(bufLen)
{
SL811BufRead(((dataX&1)?data0:data1), usbstack.buffer, bufLen);
usbstack.buffer += bufLen;
}
//------------------------------------------------
// Terminate on short packets, i.e. remainder!=0
// a short packet or empty data packet OR when
// requested data len have completed, i.e.wLen=0
// For a LOWSPEED device, the 1st device descp,
// wPayload is default to 64-u_int8, LS device will
// only send back a max of 8-u_int8 device descp,
// and host detect this as a short packet, and
// terminate with OUT status stage
//------------------------------------------------
if(remainder || !usbstack.wLen)
break;
}// PID IN
}
//-------------------------NAK----------------------------
if (result & EP0_NAK) // NAK Detected
{
if(usbstack.endpoint==0) // on ep0 during enumeration of LS device
{ // happen when slave is not fast enough,
SL811Write(IntStatus,INT_CLEAR); // clear interrupt status, need to
SL811Write(EP0Control,cmd); // re-arm and request for last cmd, IN token
result = 0; // respond to NAK status only
}
else // normal data endpoint, exit now !!! , non-zero ep
break; // main loop control the interval polling
}
//-----------------------TIMEOUT--------------------------
if (result & EP0_TIMEOUT) // TIMEOUT Detected
{
if(usbstack.endpoint==0) // happens when hub enumeration
{
if(++timeout >= TIMEOUT_RETRY)
{
timeout--;
break; // exit on the timeout detected
}
SL811Write(IntStatus,INT_CLEAR); // clear interrupt status, need to
SL811Write(EP0Control,cmd); // re-arm and request for last cmd again
}
else
{ // all other data endpoint, data transfer
bXXGFlags.TIMEOUT_ERR = TRUE; // failed, set flag to terminate transfer
break; // happens when data transfer on a device
} // through the hub
}
//-----------------------STALL----------------------------
if (result & EP0_STALL) // STALL detected
return TRUE; // for unsupported request.
//----------------------OVEFLOW---------------------------
if (result & EP0_OVERFLOW) // OVERFLOW detected
//result=result;
break;
//-----------------------ERROR----------------------------
if (result & EP0_ERROR) // ERROR detected
//result=result;
break;
} // end of While(1)
if (result & EP0_ACK) // on ACK transmission
return TRUE; // return OK
return FALSE; // fail transmission
}
