C++ (Cpp) _spi_int_unmask 예제들

예제 #1

파일: spi_dw.c 프로젝트: coldnew/zephyr-project-fork

void spi_config_0_irq(void)
{
#ifdef CONFIG_SPI_DW_INTERRUPT_SINGLE_LINE
	IRQ_CONNECT(CONFIG_SPI_DW_PORT_0_IRQ, CONFIG_SPI_DW_PORT_0_PRI,
		    spi_dw_isr, DEVICE_GET(spi_dw_port_0), SPI_DW_IRQ_FLAGS);
	irq_enable(CONFIG_SPI_DW_PORT_0_IRQ);
	_spi_int_unmask(SPI_DW_PORT_0_INT_MASK);
#else /* SPI_DW_INTERRUPT_SEPARATED_LINES */
	IRQ_CONNECT(CONFIG_SPI_DW_PORT_0_RX_IRQ, CONFIG_SPI_DW_PORT_0_PRI,
		    spi_dw_isr, DEVICE_GET(spi_dw_port_0), SPI_DW_IRQ_FLAGS);
	IRQ_CONNECT(CONFIG_SPI_DW_PORT_0_TX_IRQ, CONFIG_SPI_DW_PORT_0_PRI,
		    spi_dw_isr, DEVICE_GET(spi_dw_port_0), SPI_DW_IRQ_FLAGS);
	IRQ_CONNECT(CONFIG_SPI_DW_PORT_0_ERROR_IRQ, CONFIG_SPI_DW_PORT_0_PRI,
		    spi_dw_isr, DEVICE_GET(spi_dw_port_0), SPI_DW_IRQ_FLAGS);

	irq_enable(CONFIG_SPI_DW_PORT_0_RX_IRQ);
	irq_enable(CONFIG_SPI_DW_PORT_0_TX_IRQ);
	irq_enable(CONFIG_SPI_DW_PORT_0_ERROR_IRQ);

	_spi_int_unmask(SPI_DW_PORT_0_RX_INT_MASK);
	_spi_int_unmask(SPI_DW_PORT_0_TX_INT_MASK);
	_spi_int_unmask(SPI_DW_PORT_0_ERROR_INT_MASK);
#endif
}

예제 #2

파일: spi_dw_legacy.c 프로젝트: zmole945/zephyr

void spi_config_1_irq(void)
{
#ifdef CONFIG_SPI_DW_INTERRUPT_SINGLE_LINE
	IRQ_CONNECT(SPI_DW_PORT_1_IRQ, CONFIG_SPI_1_IRQ_PRI,
		    spi_dw_isr, DEVICE_GET(spi_dw_port_1), SPI_DW_IRQ_FLAGS);
	irq_enable(SPI_DW_PORT_1_IRQ);
	_spi_int_unmask(SPI_DW_PORT_1_INT_MASK);
#else /* SPI_DW_INTERRUPT_SEPARATED_LINES */
	IRQ_CONNECT(IRQ_SPI1_RX_AVAIL, CONFIG_SPI_1_IRQ_PRI,
		    spi_dw_isr, DEVICE_GET(spi_dw_port_1), SPI_DW_IRQ_FLAGS);
	IRQ_CONNECT(IRQ_SPI1_TX_REQ, CONFIG_SPI_1_IRQ_PRI,
		    spi_dw_isr, DEVICE_GET(spi_dw_port_1), SPI_DW_IRQ_FLAGS);
	IRQ_CONNECT(IRQ_SPI1_ERR_INT, CONFIG_SPI_1_IRQ_PRI,
		    spi_dw_isr, DEVICE_GET(spi_dw_port_1), SPI_DW_IRQ_FLAGS);

	irq_enable(IRQ_SPI1_RX_AVAIL);
	irq_enable(IRQ_SPI1_TX_REQ);
	irq_enable(IRQ_SPI1_ERR_INT);

	_spi_int_unmask(SPI_DW_PORT_1_RX_INT_MASK);
	_spi_int_unmask(SPI_DW_PORT_1_TX_INT_MASK);
	_spi_int_unmask(SPI_DW_PORT_1_ERROR_INT_MASK);
#endif
}

예제 #3

파일: spi_dw.c 프로젝트: milinddeore/zephyr

void spi_config_3_irq(void)
{
#ifdef CONFIG_SPI_DW_PORT_3_INTERRUPT_SINGLE_LINE
	IRQ_CONNECT(DT_SPI_3_IRQ, DT_SPI_3_IRQ_PRI,
		    spi_dw_isr, DEVICE_GET(spi_dw_port_3), DT_SPI_DW_IRQ_FLAGS);
	irq_enable(DT_SPI_3_IRQ);
	_spi_int_unmask(SPI_DW_PORT_3_INT_MASK);
#else
	IRQ_CONNECT(DT_SPI_3_IRQ_RX_AVAIL, DT_SPI_3_IRQ_RX_AVAIL_PRI,
		    spi_dw_isr, DEVICE_GET(spi_dw_port_3), DT_SPI_DW_IRQ_FLAGS);
	IRQ_CONNECT(DT_SPI_3_IRQ_TX_REQ, DT_SPI_3_IRQ_TX_REQ_PRI,
		    spi_dw_isr, DEVICE_GET(spi_dw_port_3), DT_SPI_DW_IRQ_FLAGS);
	IRQ_CONNECT(DT_SPI_3_IRQ_ERR_INT, DT_SPI_3_IRQ_ERR_INT_PRI,
		    spi_dw_isr, DEVICE_GET(spi_dw_port_3), DT_SPI_DW_IRQ_FLAGS);

	irq_enable(DT_SPI_3_IRQ_RX_AVAIL);
	irq_enable(DT_SPI_3_IRQ_TX_REQ);
	irq_enable(DT_SPI_3_IRQ_ERR_INT);

	_spi_int_unmask(SPI_DW_PORT_3_RX_INT_MASK);
	_spi_int_unmask(SPI_DW_PORT_3_TX_INT_MASK);
	_spi_int_unmask(SPI_DW_PORT_3_ERROR_INT_MASK);
#endif
}