int main(int argc, char **argv) {
int maxfd;
fd_set fds;
struct vty_cmd_table t;
log_init();
log_setlevel(LOGLVL_DEBUG);
signal(SIGINT, shutdown);
t.n = 1;
t.table = &echo;
vty_init(&t, atoi(argv[1]));
while (1) {
FD_ZERO(&fds);
maxfd = vty_add_fds(&fds);
select(maxfd+1, &fds, NULL, NULL, NULL);
vty_process(&fds);
}
info("Done, exiting\n");
}
int config_parse(const char *file, struct config *c) {
char *buf, real_buf[BUF_LEN], arg[BUF_LEN];
FILE *fp = fopen(file, "r");
int gotargs = 0;
if (fp == NULL) return 1;
// defaults
c->retries = BLIP_L2_RETRIES;
while (fgets(real_buf, BUF_LEN, fp) != NULL) {
buf = real_buf;
rm_comment(buf);
upd_start(&buf);
if (sscanf(buf, "addr %s\n", arg) > 0) {
inet_pton6(arg, &c->router_addr);
gotargs ++;
} else if (sscanf(buf, "proxy %s\n", c->proxy_dev) > 0) {
gotargs ++;
} else if (sscanf(buf, "channel %i\n", &c->channel) > 0) {
if (c->channel < 11 || c->channel > 26) {
fatal("Invalid channel specified in '%s'\n", file);
exit(1);
}
gotargs ++;
} else if (sscanf(buf, "log %s\n", arg) > 0) {
int i;
for (i = 0; i < 5; i++) {
if (strncmp(log_names[i], arg, strlen(log_names[i])) == 0) {
info("Read log level: %s\n", arg);
log_setlevel(i);
break;
}
}
} else if (sscanf(buf, "retry %i\n", &c->retries) > 0) {
if (c->retries <= 0 || c->retries > 25) {
warn("retry value set to %i: outside of the recommended range (0,25]\n", c->retries);
}
} else if (*buf != '\0') {
// anything else indicates that there's invalid input.
return 1;
}
}
fclose(fp);
if (gotargs != 3) return 1;
info("Read config from '%s'\r\n", file);
if (strncmp(c->proxy_dev, "lo", 3) != 0) {
info("Proxying neighbor advertisements to %s\r\n", c->proxy_dev);
}
info("Using channel %i\r\n", c->channel);
info("Retries: %i\r\n", c->retries);
lastconfig = c;
return 0;
}
int main(int argc, char *argv[]) {
int level;
int opt;
int sock;
while ((opt = getopt(argc, argv, "vhdp:l:")) != -1) {
switch (opt) {
case 'v':
print_version();
return 0;
case 'h':
print_usage();
return 0;
case 'd':
g_debug_mode = !0;
log_file = NULL;
break;
case 'p':
g_rs_port = atoi(optarg);
break;
case 'l':
level = atoi(optarg);
if (level < 0 || level >= PINE_LOG_MAX) {
exit(EXIT_FAILURE);
}
log_setlevel(level);
break;
default: /* ? */
print_usage();
exit(EXIT_FAILURE);
}
}
if (log_init(log_file) < 0) {
exit(EXIT_FAILURE);
}
if (!g_debug_mode) {
if (daemon(0, 0) < 0) {
perror("daemon()");
exit(EXIT_FAILURE);
}
}
logger(PINE_LOG_INFO, "start pined");
sock = create_socket();
if (sock < 0) {
exit(EXIT_FAILURE);
}
signal(SIGPIPE, SIG_IGN);
return do_pined(sock);
}
int main(int argc, char **argv) {
char print_buf[128], dev[IF_NAMESIZE];
log_init();
log_setlevel(LOGLVL_DEBUG);
if (argc != 3) {
fatal("%s <device> <rate>\n", argv[0]);
exit(1);
}
queue_init(&pan_q);
queue_init(&tun_q);
init_reconstruct();
if (config_parse("ieee154_interface.conf", &device_config)) {
log_fatal_perror("parsing config file failed");
exit(1);
}
/* set up the serial interface device */
pthread_mutex_init(&pan_lock, NULL);
if (setup_serial(argv[1], argv[2], &device_config)) {
fatal("opening serial device failed!\n");
exit(1);
}
snprintf(print_buf, 128, "%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
device_config.eui64.data[0],device_config.eui64.data[1],device_config.eui64.data[2],
device_config.eui64.data[3],device_config.eui64.data[4],device_config.eui64.data[5],
device_config.eui64.data[6],device_config.eui64.data[7]);
info("device EUI-64: %s\n", print_buf);
pthread_create(&pan_writer, NULL, pan_write, NULL);
pthread_create(&reconstruct_thread, NULL, age_reconstruct, NULL);
/* initialize thes tun */
tun_fd = tun_open(dev);
if (tun_fd < 0) {
log_fatal_perror("opening tun device failed");
exit(1);
}
if (tun_setup(dev, device_config.eui64) < 0) {
exit(1);
}
sleep(1);
pthread_create(&tun_reader, NULL, tun_dev_read, NULL);
pthread_create(&pan_reader, NULL, pan_read, NULL);
pthread_join(pan_writer, NULL);
}
int main(int argc, const char *argv[])
{
/* open global logger to stderr (by setting filename to NULL) */
log_open("example", NULL, 0);
/* set log level to info, also the default level */
log_setlevel(LOG_INFO);
/* debug mesage won't be seen */
log_debug("debug message");
/* but info and warn message can be seen */
log_info("info message");
log_warn("warn message");
return 0;
}
int main(int argc, char *argv[]) {
log_open("statsd-proxy", NULL, 0);
char *filename;
const char *short_opt = "hvdf:";
struct option long_opt[] = {
{"help", no_argument, NULL, 'h'},
{"version", no_argument, NULL, 'v'},
{"debug", no_argument, NULL, 'd'},
{"file", required_argument, NULL, 'f'},
{NULL, 0, NULL, 0},
};
int c;
while ((c = getopt_long(argc, argv, short_opt, long_opt, NULL)) != -1) {
switch (c) {
case 'h':
case ':':
case '?':
usage();
break;
case 'v':
version();
break;
case 'f':
filename = optarg;
break;
case 'd':
log_setlevel(LOG_DEBUG);
break;
default:
usage();
};
}
if (argc == 1 || optind < argc) usage();
struct config *config = config_new();
if (config == NULL) exit(1);
if (config_init(config, filename) != CONFIG_OK) exit(1);
start(config);
config_free(config);
log_close();
return 0;
}
int main(int argc, const char *argv[]) {
/* open global logger to stderr (by setting filename to NULL) */
log_open("example", NULL, 0);
/* set log level to info, also the default level */
log_setlevel(LOG_INFO);
/* debug mesage won't be seen */
log_debug("debug message");
/* but info and warn, error message can be seen */
log_info("info message");
log_warn("warn message");
log_error("error message: %s", "someting wrong");
/* will log trace back on segmentfault automatically */
make_segmentfault();
return 0;
}
int main(int argc, char *argv[])
{
if (0 != parse_options(argc, argv))
{
usage();
return 1;
}
if (!verbose)
log_setlevel(LOGLEVEL_CRITICAL);
memset(&g_srvctx, 0, sizeof(g_srvctx));
g_srvctx.loop = ev_default_loop(0);
ev_set_userdata(g_srvctx.loop, &g_srvctx);
if (NULL == (g_srvctx.timer_1hz = (struct ev_timer *)malloc(sizeof(struct ev_timer))))
LOG_CRITICAL("out of mem");
if (NULL == (g_srvctx.timer_10hz = (struct ev_timer *)malloc(sizeof(struct ev_timer))))
LOG_CRITICAL("out of mem");
if (NULL == (g_srvctx.idle_watcher = (struct ev_idle *)malloc(sizeof(struct ev_idle))))
LOG_CRITICAL("out of mem");
ev_timer_init(g_srvctx.timer_1hz, (void *)timeout_1hz_cb, 0, 1);
ev_set_priority(g_srvctx.timer_1hz, EV_MAXPRI);
ev_timer_start(g_srvctx.loop, g_srvctx.timer_1hz);
ev_timer_init(g_srvctx.timer_10hz, (void *)timeout_10hz_cb, 0, 0.1);
ev_set_priority(g_srvctx.timer_10hz, EV_MAXPRI);
ev_timer_start(g_srvctx.loop, g_srvctx.timer_10hz);
ev_idle_init(g_srvctx.idle_watcher, idle_cb);
if (0 != serial_init(g_srvctx.loop, &(g_srvctx.serialctx), device_name))
{
LOG_CRITICAL("Failed to open %s", device_name);
}
if (0 != mqtt_connect(&(g_srvctx.mqttctx), CLIENT_NAME, server, port))
{
LOG_CRITICAL("failed to connect to server");
}
while(1)
{
ev_loop(g_srvctx.loop, 0);
}
return 0;
}
int main(void) {
BUFFER * buffer;
double din1, din2, dout1, dout2;
int64_t lin1, lin2, lout1, lout2;
char * sin1, *sin2;
const char * sout1, * sout2;
hessian_object_t * h_din1, * h_din2, * h_dout1, * h_dout2, * h_lin1, * h_lin2, * h_lout1, * h_lout2, * h_sin1, * h_sin2, * h_sout2, * h_sout1;
din1= -0.678687687;
din2= 123423.3423;
lin1= 979798797798;
lin2= -65422454;
sin1= "";
sin2= "heelo";
printf("din1: %f\n",din1);
printf("din2: %f\n",din2);
h_din1= hessian_create(HESSIAN_DOUBLE, din1);
h_din2= hessian_create(HESSIAN_DOUBLE, din2);
printf("lin1: %ld\n",lin1);
printf("lin2: %ld\n",lin2);
h_lin1= hessian_create(HESSIAN_LONG, lin1);
h_lin2= hessian_create(HESSIAN_LONG, lin2);
printf("sin1: '%s'\n",sin1);
printf("sin2: '%s'\n",sin2);
h_sin1= hessian_create(HESSIAN_STRING, sin1);
h_sin2= hessian_create(HESSIAN_STRING, sin2);
buffer= buffer_create(1024);
printf("serialize...\n");
hessian_serialize(h_din1,buffer);
hessian_serialize(h_din2,buffer);
hessian_serialize(h_sin1,buffer);
hessian_serialize(h_sin2,buffer);
hessian_serialize(h_lin1,buffer);
hessian_serialize(h_lin2,buffer);
printf("deserialize...\n");
h_dout1= hessian_deserialize(buffer);
h_dout2= hessian_deserialize(buffer);
h_sout1= hessian_deserialize(buffer);
h_sout2= hessian_deserialize(buffer);
h_lout1= hessian_deserialize(buffer);
h_lout2= hessian_deserialize(buffer);
dout1= hessian_double_getvalue(h_dout1);
dout2= hessian_double_getvalue(h_dout2);
lout1= hessian_long_getvalue(h_lout1);
lout2= hessian_long_getvalue(h_lout2);
sout1= hessian_string_getstring(h_sout1);
sout2= hessian_string_getstring(h_sout2);
printf("dout1: %f\n",dout1);
printf("dout2: %f\n",dout2);
printf("lout1: %ld\n",lout1);
printf("lout2: %ld\n",lout2);
printf("sout1: '%s'\n",sout1);
printf("sout2: '%s'\n",sout2);
printf("tests...\n");
if (din1 != dout1) {
printf("din1 (%f) != dout1 (%f)\n",din1,dout1);
return 1;
}
if (din2 != dout2) {
printf("din2 (%f) != dout2 (%f)\n",din2,dout2);
return 1;
}
if (lin1 != lout1) {
printf("lin1 (%ld) != lout1 (%ld)\n",lin1,lout1);
return 2;
}
if (lin2 != lout2) {
printf("lin2 (%ld) != lout2 (%ld)\n",lin2,lout2);
return 2;
}
if (strcmp(sin1,sout1) != 0) {
printf("sin1 '%s' != sout1 '%s'\n",sin1,sout1);
return 3;
}
if (strcmp(sin2,sout2) != 0) {
printf("sin2 '%s' != sout2 '%s'\n",sin2,sout2);
return 3;
}
/*
const char * filename= "/tmp/java_hessian_resource.data";
FILE * file;
printf("test deserialization from Java serialization. Data: %s\n", filename);
file= fopen(filename,"r");
if (file==NULL) {
printf("failed to open file: %s\n", filename);
return 4;
}
buffer_reset(buffer);
size_t size= buffer_fread(buffer,file);
printf("%d bytes read from %s\n", (int)size, filename);
log_setout(stderr);
log_setlevel(LOG_LEVEL_TRACE);
printf("deserialize hessian resource...\n");
hessian_object_t * h_resource= hessian_deserialize(buffer);
xacml_resource_t * resource;
int io_rc= xacml_resource_unmarshal(&resource, h_resource);
printf("result: %d\n",io_rc);
*/
printf("using: %s\n",pep_version());
printf("base64 decoding and hessian deserialization test...\n");
log_setout(stderr);
log_setlevel(LOG_LEVEL_TRACE);
const char * b64filename= "b64input1";
FILE * b64file= fopen(b64filename,"r");
if (b64file==NULL) {
printf("failed to open b64 file: %s\n", b64filename);
return 5;
}
BUFFER * b64input= buffer_create(1024);
if (b64input==NULL) {
printf("failed to create b64input buffer\n");
return 5;
}
size_t size= buffer_fread(b64input,b64file);
printf("%d bytes read from %s\n", (int)size, b64filename);
BUFFER * input= buffer_create(1024);
if (input==NULL) {
printf("failed to create input buffer\n");
return 5;
}
printf("base64 decode input buffer...\n");
base64_decode(b64input,input);
size= buffer_length(input);
printf("%d bytes available in input buffer\n", (int)size);
/* unmarshal the PEP response */
xacml_response_t * response;
pep_error_t unmarshal_rc= xacml_response_unmarshalling(&response,input);
if ( unmarshal_rc != PEP_OK) {
printf("pep_authorize: can't unmarshal the XACML response: %s.", pep_strerror(unmarshal_rc));
buffer_delete(b64input);
buffer_delete(input);
return unmarshal_rc;
}
printf("hessian response deserialized from: %s.\n", b64filename);
dump_xacml_request(stdout, xacml_response_getrequest(response));
dump_xacml_response(stdout,response);
printf("buffer tests...\n");
BUFFER * buf= buffer_create(1024);
buffer_delete(buf);
if (buf == NULL) printf("buf is NULL\n");
else printf("buf not NULL\n");
return 0;
}
int main(int argc, const char **argv) {
log_printf(NORMAL, "Starting OpenMOC...");
double k_eff;
Timer timer;
/* Create an options class to parse command line options */
Options opts(argc, argv);
/* Set the verbosity */
log_setlevel(opts.getVerbosity());
/* Initialize the parser and time the parser */
timer.start();
Parser parser(&opts);
timer.stop();
timer.recordSplit("Parsing input files");
/* Initialize the geometry with surfaces, cells & materials */
timer.reset();
timer.start();
Geometry geometry(&parser);
timer.stop();
timer.recordSplit("Geomery initialization");
/* Print out geometry to console if requested at runtime*/
if (opts.dumpGeometry())
geometry.printString();
/* Compress cross-sections if requested at runtime */
if (opts.compressCrossSections())
geometry.compressCrossSections();
Plotter plotter(&geometry, opts.getBitDimension(), opts.getExtension());
/* Initialize the trackgenerator */
TrackGenerator track_generator(&geometry, &plotter, opts.getNumAzim(),
opts.getTrackSpacing());
/* Generate tracks */
timer.reset();
timer.start();
track_generator.generateTracks();
track_generator.makeReflective();
timer.stop();
timer.recordSplit("Generating tracks");
/* Segment tracks */
timer.reset();
timer.start();
track_generator.segmentize();
timer.stop();
timer.recordSplit("Segmenting tracks");
/* Fixed source iteration to solve for k_eff */
Solver solver(&geometry, &track_generator, &plotter, opts.plotFluxes());
timer.reset();
timer.start();
k_eff = solver.computeKeff(MAX_ITERATIONS);
timer.stop();
timer.recordSplit("Fixed source iteration");
/* Compute pin powers if requested at run time */
if (opts.computePinPowers())
solver.computePinPowers();
log_printf(RESULT, "k_eff = %f", k_eff);
/* Print timer splits to console */
log_printf(NORMAL, "Program complete");
timer.printSplits();
}
int main(int argc, char **argv) {
SDL_Init(0);
SDL_Thread *thread;
int opt;
t_rocsmq_message message;
int x_it = 0;
// parse config file
parseconfig(CONFIGFILE, &baseconfig, 0, 0 ,0);
// open log
log_message(DEBUG, "logging to file.. '%s'\n", baseconfig.logfile);
openlog((char const *)baseconfig.clientname, (char const*)baseconfig.logfile);
log_message(DEBUG, "loglevel = %d\n", baseconfig.loglevel);
// set loglevel
log_setlevel(baseconfig.loglevel);
log_message(DEBUG, "clientname: %s", baseconfig.clientname);
strncpy (message.sender, baseconfig.clientname, 20);
memset (message.tail, 0, 1000);
strncpy (message.id, "", ROCS_IDSIZE);
// get command line options
while ((opt = getopt(argc, argv, "n:i:m:f:x")) != -1) {
switch(opt) {
case 'n':
strcpy(baseconfig.clientname, optarg);
break;
case 'i':
strncpy(message.id,optarg, ROCS_IDSIZE);
break;
case 'm':
strncpy(message.tail,optarg, 1000);
break;
case 'x':
x_it = 1;
break;
case 'f':
parseconfig(optarg, &baseconfig,0, 0,0);
default:
printf("usage:\n %s [-n name] [-i message-id] [-m message] [-x]\n", argv[0]);
printf(" -n - name of the client\n");
printf(" -i - identifier of the message\n");
printf(" -m - body of the message\n");
printf(" -x - exit after sending, goes into listening mode else.\n");
}
}
sock = rocsmq_init(&baseconfig);
if (!sock) {
SDL_Quit();
printf("could not connect to Server: %s\n", rocsmq_error());
exit(1);
}
// start network listener
thread = rocsmq_start_thread(sock);
if (message.id != 0) {
log_message( INFO, "sending message\n ->id:\t%d\n ->tail:\t'%s'\n",message.id, message.tail);
if (! rocsmq_send(sock,&message,0)) {
log_message(ERROR,"could not send: %s\n",rocsmq_error());
}
}
if (! x_it)
while (rocsmq_thread_is_running()) {
while(rocsmq_has_messages()) {
rocsmq_get_message(&message);
log_message( INFO, "incoming message\n ->id:\t%d\n ->tail:\t'%s'\n",message.id, message.tail);
if (strcmp("quit",message.tail) == 0) {
rocsmq_thread_set_running(0);
log_message(INFO,"quitting..\n");
}
}
SDL_Delay(100);
printf(".");
}
rocsmq_destroy_thread(thread);
rocsmq_exit(sock);
SDL_Quit();
return 0;
}
int main(int argc, const char **argv) {
Options options(argc, argv);
Timer timer;
log_setlevel(options.getVerbosity());
/* Get the number of neutrons, bins and batches */
int num_neutrons = options.getNumNeutrons();
int num_bins = options.getNumBins();
int num_batches = options.getNumBatches();
int num_threads = options.getNumThreads();
int num_gen;
int num_alive;
log_printf(NORMAL, "Beginning two region problem with %d neutrons, "
"%d bins, %d batches, %d threads...", num_neutrons, num_bins,
num_batches, num_threads);
/* Create a handle for plotting with gnuplot */
gnuplot_ctrl* handle;
/* Create a set of plotting flux bins for each batch */
BatchBinSet* total_flux = new BatchBinSet();
BatchBinSet* fuel_flux = new BatchBinSet();
BatchBinSet* moderator_flux = new BatchBinSet();
total_flux->createBinners(1E-6, 1E7, num_bins, num_batches,
LOGARITHMIC, FLUX_ENERGY, (char*)"all");
fuel_flux->createBinners(1E-6, 1E7, num_bins, num_batches,
LOGARITHMIC, FLUX_ENERGY, (char*)"all");
moderator_flux->createBinners(1E-6, 1E7, num_bins, num_batches,
LOGARITHMIC, FLUX_ENERGY, (char*)"all");
/* Create bins to compute total fission and absorption rates */
BatchBinSet* tot_fiss_rate = new BatchBinSet();
BatchBinSet* tot_abs_rate = new BatchBinSet();
tot_fiss_rate->createBinners(1E-7, 1E7, 1, num_batches, EQUAL,
FISSION_RATE_ENERGY, (char*)"all");
tot_abs_rate->createBinners(1E-7, 1E7, 1, num_batches, EQUAL,
ABSORPTION_RATE_ENERGY, (char*)"all");
float nu_bar = 2.455; /* CASMO edit for average # neutrons per fission */
/* Create bins to compute two group cell-averaged cross-sections */
BatchBinSet* capture_2G = new BatchBinSet();
BatchBinSet* absorb_2G = new BatchBinSet();
BatchBinSet* fission_2G = new BatchBinSet();
BatchBinSet* elastic_2G = new BatchBinSet();
BatchBinSet* total_2G = new BatchBinSet();
BatchBinSet* two_group_flux = new BatchBinSet();
float two_group_E_ranges[3] = {0.0, 0.625, 1E7};
capture_2G->createBinners(two_group_E_ranges, 2, num_batches,
CAPTURE_RATE_ENERGY, (char*)"all");
absorb_2G->createBinners(two_group_E_ranges, 2, num_batches,
ABSORPTION_RATE_ENERGY, (char*)"all");
fission_2G->createBinners(two_group_E_ranges, 2, num_batches,
FISSION_RATE_ENERGY, (char*)"all");
elastic_2G->createBinners(two_group_E_ranges, 2, num_batches,
ELASTIC_RATE_ENERGY, (char*)"all");
total_2G->createBinners(two_group_E_ranges, 2, num_batches,
COLLISION_RATE_ENERGY, (char*)"all");
two_group_flux->createBinners(two_group_E_ranges, 2, num_batches,
FLUX_ENERGY, (char*)"all");
/* Create bins to compute two group isotopic cross-sections */
BatchBinSet* H1_capture_rate_2G = new BatchBinSet();
BatchBinSet* H1_elastic_rate_2G = new BatchBinSet();
BatchBinSet* O16_elastic_rate_2G = new BatchBinSet();
BatchBinSet* ZR90_elastic_rate_2G = new BatchBinSet();
BatchBinSet* U235_capture_rate_2G = new BatchBinSet();
BatchBinSet* U235_elastic_rate_2G = new BatchBinSet();
BatchBinSet* U235_fission_rate_2G = new BatchBinSet();
BatchBinSet* U238_capture_rate_2G = new BatchBinSet();
BatchBinSet* U238_elastic_rate_2G = new BatchBinSet();
BatchBinSet* U238_fission_rate_2G = new BatchBinSet();
H1_capture_rate_2G->createBinners(two_group_E_ranges, 2, num_batches,
CAPTURE_RATE_ENERGY, (char*)"H1");
H1_elastic_rate_2G->createBinners(two_group_E_ranges, 2, num_batches,
ELASTIC_RATE_ENERGY, (char*)"H1");
O16_elastic_rate_2G->createBinners(two_group_E_ranges, 2, num_batches,
ELASTIC_RATE_ENERGY, (char*)"O16");
ZR90_elastic_rate_2G->createBinners(two_group_E_ranges, 2, num_batches,
ELASTIC_RATE_ENERGY, (char*)"ZR90");
U235_capture_rate_2G->createBinners(two_group_E_ranges, 2, num_batches,
CAPTURE_RATE_ENERGY, (char*)"U235");
U235_elastic_rate_2G->createBinners(two_group_E_ranges, 2, num_batches,
ELASTIC_RATE_ENERGY, (char*)"U235");
U235_fission_rate_2G->createBinners(two_group_E_ranges, 2, num_batches,
FISSION_RATE_ENERGY, (char*)"U235");
U238_capture_rate_2G->createBinners(two_group_E_ranges, 2, num_batches,
CAPTURE_RATE_ENERGY, (char*)"U238");
U238_elastic_rate_2G->createBinners(two_group_E_ranges, 2, num_batches,
ELASTIC_RATE_ENERGY, (char*)"U238");
U238_fission_rate_2G->createBinners(two_group_E_ranges, 2, num_batches,
FISSION_RATE_ENERGY, (char*)"U238");
/* Create bins to compute moderator to fuel flux ratios */
int num_ratios = 13;
BatchBinSet* fuel_flux_ratio = new BatchBinSet();
BatchBinSet* moderator_flux_ratio = new BatchBinSet();
float flux_ratio_E_ranges[14] = {0.0, 0.1, 0.5, 1.0, 6.0, 10.0, 25.0,
50.0, 100.0, 1000.0, 10000.0, 100000.0,
500000.0, 10000000.0};
fuel_flux_ratio->createBinners(flux_ratio_E_ranges, num_ratios,
num_batches, FLUX_ENERGY, (char*)"all");
moderator_flux_ratio->createBinners(flux_ratio_E_ranges, num_ratios,
num_batches, FLUX_ENERGY, (char*)"all");
/* Create bins to compute the diffusion coefficient for three methods */
BatchBinSet* coll_rate_2G = new BatchBinSet();
BatchBinSet* transport_rate_2G = new BatchBinSet();
BatchBinSet* diffusion_rate_2G = new BatchBinSet();
coll_rate_2G->createBinners(two_group_E_ranges, 2, num_batches,
COLLISION_RATE_ENERGY, (char*)"all");
transport_rate_2G->createBinners(two_group_E_ranges, 2, num_batches,
TRANSPORT_RATE_ENERGY, (char*)"all");
diffusion_rate_2G->createBinners(two_group_E_ranges, 2, num_batches,
DIFFUSION_RATE_ENERGY, (char*)"all");
/* 2-region pin cell geometric parameters (units in cm) */
float r_fuel = 0.4096;
float r_gap = 0.4178;
float r_cladding = 0.4750;
float pitch = 1.26;
float p2 = pitch * pitch;
/* 2-region homogenized densities (g/cm^3) and enrichment */
float rho_fuel = 10.2;
float rho_cladding = 6.549;
float rho_coolant = 0.9966;
float enrichment = 0.03035;
/* Isotope number densities */
float N_A = 6.023E23; /* Avogadro's number (at / mol) */
float N_U238 = rho_fuel*N_A*(1.0 - enrichment) / ((238.0 *
(1.0 - enrichment)) + (235.0*enrichment) + (16.0*2.0));
float N_U235 = rho_fuel*N_A*enrichment / ((238.0 *
(1.0 - enrichment)) + (235.0*enrichment) + (16.0*2.0));
float N_O16 = rho_fuel*N_A*2.0 / ((238.0 *
(1.0 - enrichment)) + (235.0*enrichment) + (16.0*2.0));
float N_ZR90 = rho_cladding*N_A / 90.0;
float N_H2O = rho_coolant*N_A / 18.0;
float N_H1 = rho_coolant*N_A*2.0 / 18.0;
/* 2-region pin cell volumes (cm^3) */
float v_fuel = M_PI*r_fuel*r_fuel;
float v_gap = M_PI*(r_gap*r_gap - r_fuel*r_fuel);
float v_cladding = M_PI*(r_cladding*r_cladding - r_gap*r_gap);
float v_coolant = p2 - M_PI*r_cladding*r_cladding;
float v_moderator = v_gap + v_cladding + v_coolant;
float v_total = v_fuel + v_moderator;
/* Compute homogenized moderator number densities using volume weighting */
N_H2O *= (v_coolant / v_moderator);
N_H1 *= (v_coolant / v_moderator);
N_ZR90 *= (v_cladding / v_moderator);
/* Dancoff factor from CASMO-5 */
float dancoff = 0.277;
/* Escape cross-section */
float sigma_e = 1.0 / (2.0*r_fuel);
/* Carlvik's two-term rational model */
float A = (1.0 - dancoff) / dancoff;
float alpha1 = ((5.0*A + 6.0) - sqrt(A*A + 36.0*A + 36.0)) /
(2.0*(A+1.0));
float alpha2 = ((5.0*A + 6.0) + sqrt(A*A + 36.0*A + 36.0)) /
(2.0*(A+1.0));
float beta = (((4.0*A + 6.0) / (A + 1.0)) - alpha1) / (alpha2 - alpha1);
/* Print out the geometry parameters */
log_printf(NORMAL, "*******************************************************"
"*************************");
log_printf(NORMAL, "\t\t\t\tGeometry Parameters (cm)");
log_printf(NORMAL, "*******************************************************"
"*************************");
log_printf(NORMAL, "");
log_printf(NORMAL, "r_fuel = %f", r_fuel);
log_printf(NORMAL, "r_gap = %f", r_gap);
log_printf(NORMAL, "r_cladding = %f", r_cladding);
log_printf(NORMAL, "pitch = %f", pitch);
log_printf(NORMAL, "total cell area = %f", p2);
log_printf(NORMAL, "v_fuel = %f", v_fuel);
log_printf(NORMAL, "v_gap = %f", v_gap);
log_printf(NORMAL, "v_cladding = %f", v_cladding);
log_printf(NORMAL, "v_coolant = %f", v_coolant);
log_printf(NORMAL, "v_moderator = %f", v_moderator);
log_printf(NORMAL, "v_total = %f", v_total);
log_printf(NORMAL, "");
/* Print to the console the number densities */
log_printf(NORMAL, "*******************************************************"
"*************************");
log_printf(NORMAL, "\t\t\t\tNumber Densities (at/cm^3)");
log_printf(NORMAL, "*******************************************************"
"*************************");
log_printf(NORMAL, "");
log_printf(NORMAL, "H1:\t%1.5e", N_H1);
log_printf(NORMAL, "H2O:\t%1.5e", N_H2O);
log_printf(NORMAL, "ZR90:\t%1.5e", N_ZR90);
log_printf(NORMAL, "U235:\t%1.5e", N_U235);
log_printf(NORMAL, "U238:\t%1.5e", N_U238);
log_printf(NORMAL, "O16:\t%1.5e", N_O16);
log_printf(NORMAL, "");
/* Print to the console the collision probability parameters */
log_printf(NORMAL, "*******************************************************"
"*************************");
log_printf(NORMAL, "\t\t\tTwo Region Collision Probability Parameters");
log_printf(NORMAL, "*******************************************************"
"*************************");
log_printf(NORMAL, "");
log_printf(NORMAL, "dancoff = %f", dancoff);
log_printf(NORMAL, "sigma_e = %f", sigma_e);
log_printf(NORMAL, "A = %f", A);
log_printf(NORMAL, "alpha1 = %f", alpha1);
log_printf(NORMAL, "alpha2 = %f", alpha2);
log_printf(NORMAL, "beta = %f", beta);
log_printf(NORMAL, "");
/* Create isotopes*/
char* delim = (char*)"\t";
Isotope* H1 = new Isotope();
H1->setA(1);
H1->setIsotopeType((char*)"H1");
H1->loadXS((char*)"pendf/h-1_capture.txt", CAPTURE, delim);
H1->loadXS((char*)"pendf/h-1_elastic.txt", ELASTIC, delim);
H1->setElasticAngleType(ISOTROPIC_LAB);
H1->initializeThermalScattering(1E-6, 15, 1000, 15);
Isotope* O16 = new Isotope();
O16->setA(16);
O16->setIsotopeType((char*)"O16");
O16->loadXS((char*)"pendf/o-16_elastic.txt", ELASTIC, delim);
O16->setElasticAngleType(ISOTROPIC_LAB);
Isotope* ZR90 = new Isotope();
ZR90->setA(90);
ZR90->setIsotopeType((char*)"ZR90");
ZR90->loadXS((char*)"pendf/zr-90_elastic.txt", ELASTIC, delim);
ZR90->setElasticAngleType(ISOTROPIC_LAB);
Isotope* U235 = new Isotope();
U235->setA(235);
U235->setIsotopeType((char*)"U235");
U235->loadXS((char*)"pendf/u-235_capture.txt", CAPTURE, delim);
U235->setOneGroupElasticXS(11.4, ISOTROPIC_LAB);
U235->loadXS((char*)"pendf/u-235_fission.txt", FISSION, delim);
Isotope* U238 = new Isotope();
U238->setA(238);
U238->setIsotopeType((char*)"U238");
U238->loadXS((char*)"pendf/u-238_capture.txt", CAPTURE, delim);
U238->setOneGroupElasticXS(11.3, ISOTROPIC_LAB);
U238->loadXS((char*)"pendf/u-238_fission.txt", FISSION, delim);
/* Create Materials */
Material* moderator = new Material[num_threads];
Material* fuel = new Material[num_threads];
/* Create Regions for each thread */
Region1D* pellet = new Region1D[num_threads];
Region1D* coolant = new Region1D[num_threads];
/* Create Fissioners for each thread */
Fissioner* fissioners = new Fissioner[num_threads];
/* Create Region class objects for each thread */
for (int i=0; i < num_threads; i++) {
/* Initialize Materials for each thread with isotope clones */
moderator[i].setMaterialName((char*)"moderator");
fuel[i].setMaterialName((char*)"fuel");
moderator[i].addIsotope(ZR90->clone(), N_ZR90);
moderator[i].addIsotope(H1->clone(), N_H1);
moderator[i].addIsotope(O16->clone(), N_H2O);
moderator[i].rescaleCrossSections(1E-7, 1E7, 50000, LOGARITHMIC);
fuel[i].addIsotope(U235->clone(), N_U235);
fuel[i].addIsotope(U238->clone(), N_U238);
fuel[i].addIsotope(O16->clone(), N_O16);
fuel[i].rescaleCrossSections(1E-7, 1E7, 50000, LOGARITHMIC);
/* Set the two region collision probability parameters */
pellet[i].setRegionName((char*)"pellet");
pellet[i].setMaterial(&fuel[i]);
pellet[i].setAsFuel();
pellet[i].setOtherPinCellRegion(&coolant[i]);
pellet[i].setVolume(v_fuel);
pellet[i].setTwoRegionPinCellParams(sigma_e, beta, alpha1, alpha2);
coolant[i].setRegionName((char*)"coolant");
coolant[i].setMaterial(&moderator[i]);
coolant[i].setAsModerator();
coolant[i].setOtherPinCellRegion(&pellet[i]);
coolant[i].setVolume(v_moderator);
coolant[i].setTwoRegionPinCellParams(sigma_e, beta, alpha1, alpha2);
/* Set the fissioner class for this thread to have 10MeV maximum and
* 5000 sample bins */
fissioners[i].setEMax(10.0);
fissioners[i].setNumBins(200);
fissioners[i].buildCDF();
}
/* Run the simulation */
log_printf(NORMAL, "*******************************************************"
"*************************");
log_printf(NORMAL, "\t\t\t\tBeginning Simulation...");
log_printf(NORMAL, "*******************************************************"
"*************************");
log_printf(NORMAL, "");
timer.start();
omp_set_num_threads(num_threads);
#pragma omp parallel shared(total_flux, fuel_flux, moderator_flux,\
fuel_flux_ratio, moderator_flux_ratio,\
tot_fiss_rate, tot_abs_rate, U235_capture_rate_2G,\
U235_elastic_rate_2G, U235_fission_rate_2G,\
U238_capture_rate_2G, U238_elastic_rate_2G,\
U238_fission_rate_2G, H1_capture_rate_2G,\
H1_elastic_rate_2G, O16_elastic_rate_2G,\
ZR90_elastic_rate_2G, fuel, moderator, \
pellet, coolant, fissioners)
{
/* Loop over batches */
#pragma omp for private(num_gen, num_alive)
for (int b=0; b < num_batches; b++) {
int thread_num = omp_get_thread_num();
log_printf(NORMAL, "Batch: %d\tThread: %d", b, thread_num);
/* Set the binns for this batch */
pellet[thread_num].clearBinners();
pellet[thread_num].addBinner(total_flux->getBinner(b));
pellet[thread_num].addBinner(fuel_flux->getBinner(b));
pellet[thread_num].addBinner(fuel_flux_ratio->getBinner(b));
pellet[thread_num].addBinner(tot_fiss_rate->getBinner(b));
pellet[thread_num].addBinner(tot_abs_rate->getBinner(b));
pellet[thread_num].addBinner(U235_capture_rate_2G->getBinner(b));
pellet[thread_num].addBinner(U235_elastic_rate_2G->getBinner(b));
pellet[thread_num].addBinner(U235_fission_rate_2G->getBinner(b));
pellet[thread_num].addBinner(U238_capture_rate_2G->getBinner(b));
pellet[thread_num].addBinner(U238_elastic_rate_2G->getBinner(b));
pellet[thread_num].addBinner(U238_fission_rate_2G->getBinner(b));
pellet[thread_num].addBinner(O16_elastic_rate_2G->getBinner(b));
pellet[thread_num].addBinner(two_group_flux->getBinner(b));
pellet[thread_num].addBinner(coll_rate_2G->getBinner(b));
pellet[thread_num].addBinner(transport_rate_2G->getBinner(b));
pellet[thread_num].addBinner(diffusion_rate_2G->getBinner(b));
pellet[thread_num].addBinner(capture_2G->getBinner(b));
pellet[thread_num].addBinner(fission_2G->getBinner(b));
pellet[thread_num].addBinner(absorb_2G->getBinner(b));
pellet[thread_num].addBinner(elastic_2G->getBinner(b));
pellet[thread_num].addBinner(total_2G->getBinner(b));
coolant[thread_num].clearBinners();
coolant[thread_num].addBinner(total_flux->getBinner(b));
coolant[thread_num].addBinner(moderator_flux->getBinner(b));
coolant[thread_num].addBinner(moderator_flux_ratio->getBinner(b));
coolant[thread_num].addBinner(tot_fiss_rate->getBinner(b));
coolant[thread_num].addBinner(tot_abs_rate->getBinner(b));
coolant[thread_num].addBinner(H1_capture_rate_2G->getBinner(b));
coolant[thread_num].addBinner(H1_elastic_rate_2G->getBinner(b));
coolant[thread_num].addBinner(O16_elastic_rate_2G->getBinner(b));
coolant[thread_num].addBinner(ZR90_elastic_rate_2G->getBinner(b));
coolant[thread_num].addBinner(two_group_flux->getBinner(b));
coolant[thread_num].addBinner(coll_rate_2G->getBinner(b));
coolant[thread_num].addBinner(transport_rate_2G->getBinner(b));
coolant[thread_num].addBinner(diffusion_rate_2G->getBinner(b));
coolant[thread_num].addBinner(capture_2G->getBinner(b));
coolant[thread_num].addBinner(fission_2G->getBinner(b));
coolant[thread_num].addBinner(absorb_2G->getBinner(b));
coolant[thread_num].addBinner(elastic_2G->getBinner(b));
coolant[thread_num].addBinner(total_2G->getBinner(b));
/* Initialize all neutrons for this batch and add them to slab 1 */
for (int n=0; n < num_neutrons; n++) {
neutron* new_neutron = initializeNewNeutron();
new_neutron->_x = 0.0;
new_neutron->_mu = (float(rand()) / RAND_MAX) * 2.0 - 1.0;
new_neutron->_energy = fissioners[thread_num].emitNeutroneV();
pellet[thread_num].addNeutron(new_neutron);
}
/* Loop over all neutrons until they are all dead */
num_gen = 1;
num_alive = num_neutrons;
while (num_alive > 0) {
log_printf(DEBUG, "batch = %d, thread = %d, gen = %d, "
"num_alive = %d", b, thread_num, num_gen, num_alive);
num_gen++;
num_alive = 0;
/* Transfer neutrons between regions based on
* two region collision probabilities */
pellet[thread_num].twoRegionNeutronTransferral();
coolant[thread_num].twoRegionNeutronTransferral();
/* Update each region's vector of neutrons with those
* neutrons which were just transferred */
pellet[thread_num].initializeTransferredNeutrons();
coolant[thread_num].initializeTransferredNeutrons();
/* Move neutrons within each region */
pellet[thread_num].moveNeutrons();
coolant[thread_num].moveNeutrons();
num_alive = pellet[thread_num].getNumNeutrons() +
coolant[thread_num].getNumNeutrons();
}
}
}
log_printf(NORMAL, "");
/* Stop the timer record the timing split for this simulation */
timer.stop();
timer.recordSplit("Pset 4 time (sec)");
/* Compute batch statistics for total flux and flux in fuel, moderator */
total_flux->computeScaledBatchStatistics(num_neutrons*v_total);
fuel_flux->computeScaledBatchStatistics(num_neutrons*v_fuel);
moderator_flux->computeScaledBatchStatistics(num_neutrons*v_moderator);
/* Compute batch statistics for total fission and absorption rates */
tot_fiss_rate->computeScaledBatchStatistics(num_neutrons*v_total);
tot_abs_rate->computeScaledBatchStatistics(num_neutrons*v_total);
/* Compute batch statistics for cell-averaged macro cross-sections */
capture_2G->computeScaledBatchStatistics(num_neutrons*v_total);
fission_2G->computeScaledBatchStatistics(num_neutrons*v_total);
absorb_2G->computeScaledBatchStatistics(num_neutrons*v_total);
elastic_2G->computeScaledBatchStatistics(num_neutrons*v_total);
total_2G->computeScaledBatchStatistics(num_neutrons*v_total);
/* Compute batch statistics for one group cross-sections */
H1_capture_rate_2G->computeScaledBatchStatistics(num_neutrons*v_total);
H1_elastic_rate_2G->computeScaledBatchStatistics(num_neutrons*v_total);
O16_elastic_rate_2G->computeScaledBatchStatistics(num_neutrons*v_total);
ZR90_elastic_rate_2G->computeScaledBatchStatistics(num_neutrons*v_total);
U235_capture_rate_2G->computeScaledBatchStatistics(num_neutrons*v_total);
U235_elastic_rate_2G->computeScaledBatchStatistics(num_neutrons*v_total);
U235_fission_rate_2G->computeScaledBatchStatistics(num_neutrons*v_total);
U238_capture_rate_2G->computeScaledBatchStatistics(num_neutrons*v_total);
U238_elastic_rate_2G->computeScaledBatchStatistics(num_neutrons*v_total);
U238_fission_rate_2G->computeScaledBatchStatistics(num_neutrons*v_total);
two_group_flux->computeScaledBatchStatistics(num_neutrons*v_total);
coll_rate_2G->computeScaledBatchStatistics(num_neutrons*v_total);
transport_rate_2G->computeScaledBatchStatistics(num_neutrons*v_total);
diffusion_rate_2G->computeScaledBatchStatistics(num_neutrons*v_total);
/* Compute k-infinity */
float fiss_rate_mu = tot_fiss_rate->getBatchMu()[0];
float fiss_rate_var = tot_fiss_rate->getBatchVariance()[0];
float abs_rate_mu = tot_abs_rate->getBatchMu()[0];
float abs_rate_var = tot_abs_rate->getBatchVariance()[0];
float k_inf = fiss_rate_mu * nu_bar / abs_rate_mu;
float k_inf_var = (fiss_rate_mu*fiss_rate_mu)*abs_rate_var +
(abs_rate_mu*abs_rate_mu)*fiss_rate_var +
fiss_rate_var*abs_rate_var;
float k_inf_std_dev = sqrt(k_inf_var);
/* Compute moderator to fuel flux ratios */
fuel_flux_ratio->computeScaledBatchStatistics(num_neutrons*v_fuel);
moderator_flux_ratio->computeScaledBatchStatistics(num_neutrons*v_moderator);
fuel_flux_ratio->computeScaledBatchStatistics(num_neutrons*v_fuel);
moderator_flux_ratio->computeScaledBatchStatistics(num_neutrons*v_moderator);
/* Print to the console the total fission rate */
log_printf(RESULT, "*******************************************************"
"*************************");
log_printf(RESULT, "\t\t\tTotal Fission Rate (Batch Statistics)");
log_printf(RESULT, "*******************************************************"
"*************************");
log_printf(NORMAL, "");
log_printf(RESULT, "Tot fission rate = %1.8f\t\tVariance = %1.8f",
tot_fiss_rate->getBatchMu()[0],
tot_fiss_rate->getBatchVariance()[0]);
log_printf(RESULT, "Tot absorption rate = %f\t\tVariance = %f",
tot_abs_rate->getBatchMu()[0],
tot_abs_rate->getBatchVariance()[0]);
log_printf(RESULT, "k_inf = %f\t\tvariance = %1.8f \t\t 2 sigma = %1.8f", k_inf,
k_inf_var, k_inf_std_dev);
log_printf(RESULT, "");
/* Print to the console the moderator/fuel flux ratios */
log_printf(RESULT, "*******************************************************"
"*************************");
log_printf(RESULT, "\t\t\t\tModerator/Fuel Flux Ratios");
log_printf(RESULT, "*******************************************************"
"*************************");
log_printf(RESULT, "");
float ratio;
for (int i=1; i < num_ratios+1; i++) {
ratio = moderator_flux_ratio->getBatchMu()[i-1] /
fuel_flux_ratio->getBatchMu()[i-1];
log_printf(RESULT, "[%2.e eV - %2.e eV]:\t%f",
flux_ratio_E_ranges[i-1], flux_ratio_E_ranges[i], ratio);
}
log_printf(RESULT, "");
/* Print to the console the cell-averaged fast to thermal flux ratio */
log_printf(RESULT, "*******************************************************"
"*************************");
log_printf(RESULT, "\t\t\tCell-Averaged Fast-to-Thermal Flux Ratio");
log_printf(RESULT, "*******************************************************"
"*************************");
log_printf(RESULT, "");
double* two_group_flux_mu = two_group_flux->getBatchMu();
double flux1 = two_group_flux_mu[0];
double flux2 = two_group_flux_mu[1];
log_printf(RESULT, "Ratio = %f", flux2 / flux1);
log_printf(RESULT, "");
/* Print to the console the two group macroscopic cross-sections */
log_printf(RESULT, "*******************************************************"
"*************************");
log_printf(RESULT, "\t\tTwo Group Macroscopic Cross-Sections (cm^-1)");
log_printf(RESULT, "*******************************************************"
"*************************");
log_printf(RESULT, "");
float xs1, xs2;
log_printf(RESULT, "\t\t\t[%1.1f eV - %1.3f eV]\t[%1.3f eV - %1.1e eV]",
two_group_flux->getBinner(0)->getBinEdges()[0],
two_group_flux->getBinner(0)->getBinEdges()[1],
two_group_flux->getBinner(0)->getBinEdges()[1],
two_group_flux->getBinner(0)->getBinEdges()[2]);
/* H1 capture */
xs1 = H1_capture_rate_2G->getBatchMu()[0] / flux1;
xs2 = H1_capture_rate_2G->getBatchMu()[1] / flux2;
log_printf(RESULT, "H1 Capture: \t\t%f\t\t%f", xs1, xs2);
/* H1 elastic */
xs1 = H1_elastic_rate_2G->getBatchMu()[0] / flux1;
xs2 = H1_elastic_rate_2G->getBatchMu()[1] / flux2;
log_printf(RESULT, "H1 Elastic: \t\t%f\t\t%f", xs1, xs2);
/* O16 elastic */
xs1 = O16_elastic_rate_2G->getBatchMu()[0] / flux1;
xs2 = O16_elastic_rate_2G->getBatchMu()[1] / flux2;
log_printf(RESULT, "O16 Elastic: \t\t%f\t\t%f", xs1, xs2);
/* ZR90 elastic */
xs1 = ZR90_elastic_rate_2G->getBatchMu()[0] / flux1;
xs2 = ZR90_elastic_rate_2G->getBatchMu()[1] / flux2;
log_printf(RESULT, "ZR90 Elastic: \t\t%f\t\t%f", xs1, xs2);
/* U235 capture */
xs1 = U235_capture_rate_2G->getBatchMu()[0] / flux1;
xs2 = U235_capture_rate_2G->getBatchMu()[1] / flux2;
log_printf(RESULT, "U235 Capture: \t\t%f\t\t%f", xs1, xs2);
/* U235 elastic */
xs1 = U235_elastic_rate_2G->getBatchMu()[0] / flux1;
xs2 = U235_elastic_rate_2G->getBatchMu()[1] / flux2;
log_printf(RESULT, "U235 Elastic: \t\t%f\t\t%f", xs1, xs2);
/* U235 fission */
xs1 = U235_fission_rate_2G->getBatchMu()[0] / flux1;
xs2 = U235_fission_rate_2G->getBatchMu()[1] / flux2;
log_printf(RESULT, "U235 Fission: \t\t%f\t\t%f", xs1, xs2);
/* U238 capture */
xs1 = U238_capture_rate_2G->getBatchMu()[0] / flux1;
xs2 = U238_capture_rate_2G->getBatchMu()[1] / flux2;
log_printf(RESULT, "U238 Capture: \t\t%f\t\t%f", xs1, xs2);
/* U238 elastic */
xs1 = U238_elastic_rate_2G->getBatchMu()[0] / flux1;
xs2 = U238_elastic_rate_2G->getBatchMu()[1] / flux2;
log_printf(RESULT, "U238 Elastic: \t\t%f\t\t%f", xs1, xs2);
/* U238 fission */
xs1 = U238_fission_rate_2G->getBatchMu()[0] / flux1;
xs2 = U238_fission_rate_2G->getBatchMu()[1] / flux2;
log_printf(RESULT, "U238 Fission: \t\t%f\t\t%f", xs1, xs2);
log_printf(RESULT, "");
/* Print to the console the two group macroscopic cross-sections */
log_printf(RESULT, "*******************************************************"
"*************************");
log_printf(RESULT, "\tTwo Group Cell-Averaged Macroscopic "
"Cross-Sections (cm^-1)");
log_printf(RESULT, "*******************************************************"
"*************************");
log_printf(RESULT, "");
log_printf(RESULT, "\t\t\t[%1.1f eV - %1.3f eV]\t[%1.3f eV - %1.1e eV]",
two_group_flux->getBinner(0)->getBinEdges()[0],
two_group_flux->getBinner(0)->getBinEdges()[1],
two_group_flux->getBinner(0)->getBinEdges()[1],
two_group_flux->getBinner(0)->getBinEdges()[2]);
/* Flux */
log_printf(RESULT, "Flux: \t\t\t%f\t\t%f", flux1, flux2);
/* Capture */
xs1 = capture_2G->getBatchMu()[0] / flux1;
xs2 = capture_2G->getBatchMu()[1] / flux2;
log_printf(RESULT, "Capture: \t\t\t%f\t\t%f", xs1, xs2);
/* Fission */
xs1 = fission_2G->getBatchMu()[0] / flux1;
xs2 = fission_2G->getBatchMu()[1] / flux2;
log_printf(RESULT, "Fission: \t\t\t%f\t\t%f", xs1, xs2);
/* Absorption */
xs1 = absorb_2G->getBatchMu()[0] / flux1;
xs2 = absorb_2G->getBatchMu()[1] / flux2;
log_printf(RESULT, "Absorb: \t\t\t%f\t\t%f", xs1, xs2);
/* Elastic */
xs1 = elastic_2G->getBatchMu()[0] / flux1;
xs2 = elastic_2G->getBatchMu()[1] / flux2;
log_printf(RESULT, "Elastic: \t\t\t%f\t\t%f", xs1, xs2);
/* Total */
xs1 = total_2G->getBatchMu()[0] / flux1;
xs2 = total_2G->getBatchMu()[1] / flux2;
log_printf(RESULT, "Total: \t\t\t%f\t\t%f", xs1, xs2);
log_printf(RESULT, "");
/* Print to the console the two group macroscopic cross-sections */
log_printf(RESULT, "*******************************************************"
"*************************");
log_printf(RESULT, "\t\t\tTwo Group Diffusion Coefficients");
log_printf(RESULT, "*******************************************************"
"*************************");
log_printf(RESULT, "");
log_printf(RESULT, "\t\t\t[%1.1f eV - %1.3f eV]\t[%1.3f eV - %1.1e eV]",
two_group_flux->getBinner(0)->getBinEdges()[0],
two_group_flux->getBinner(0)->getBinEdges()[1],
two_group_flux->getBinner(0)->getBinEdges()[1],
two_group_flux->getBinner(0)->getBinEdges()[2]);
float sigma_t1, sigma_t2;
float sigma_tr1, sigma_tr2;
float D1, D2;
sigma_t1 = coll_rate_2G->getBatchMu()[0] / flux1;
sigma_t2 = coll_rate_2G->getBatchMu()[1] / flux2;
D1 = 1.0 / (3.0 * sigma_t1);
D2 = 1.0 / (3.0 * sigma_t2);
log_printf(RESULT, "1/(3*sigma_t):\t\t%f\t\t%f", D1, D2);
sigma_tr1 = transport_rate_2G->getBatchMu()[0] / flux1;
sigma_tr2 = transport_rate_2G->getBatchMu()[1] / flux2;
D1 = 1.0 / (3.0 * sigma_tr1);
D2 = 1.0 / (3.0 * sigma_tr2);
log_printf(RESULT, "1/(3*sigma_tr):\t\t%f\t\t%f", D1, D2);
D1 = diffusion_rate_2G->getBatchMu()[0] / flux1;
D2 = diffusion_rate_2G->getBatchMu()[1] / flux2;
log_printf(RESULT, "Diff coeff:\t\t%f\t\t%f", D1, D2);
log_printf(RESULT, "");
/* Plot the total neutron flux */
handle = gnuplot_init();
gnuplot_set_xlabel(handle, (char*)"Energy (eV)");
gnuplot_set_ylabel(handle, (char*)"flux");
gnuplot_set_xrange(handle, 0.005, 1E7);
gnuplot_cmd(handle, (char*)"set logscale xy");
gnuplot_cmd(handle, (char*)"set title \"Normalized Flux\"");
gnuplot_setstyle(handle, (char*)"lines");
gnuplot_plot_xy(handle, total_flux->getBinner(0)->getBinCenters(),
total_flux->getBatchMu(), num_bins, (char*)"Total Flux");
gnuplot_plot_xy(handle, fuel_flux->getBinner(0)->getBinCenters(),
fuel_flux->getBatchMu(), num_bins, (char*)"Fuel Flux");
gnuplot_saveplot(handle, (char*)"flux");
gnuplot_plot_xy(handle, moderator_flux->getBinner(0)->getBinCenters(),
moderator_flux->getBatchMu(), num_bins, (char*)"Moderator Flux");
gnuplot_close(handle);
/* Free all allocated memory */
delete [] pellet;
delete [] coolant;
delete [] fissioners;
delete [] moderator;
delete [] fuel;
delete total_flux;
delete fuel_flux;
delete moderator_flux;
delete tot_fiss_rate;
delete tot_abs_rate;
delete fuel_flux_ratio;
delete moderator_flux_ratio;
delete H1_capture_rate_2G;
delete H1_elastic_rate_2G;
delete O16_elastic_rate_2G;
delete U235_capture_rate_2G;
delete U235_elastic_rate_2G;
delete U235_fission_rate_2G;
delete U238_capture_rate_2G;
delete U238_elastic_rate_2G;
delete U238_fission_rate_2G;
delete ZR90_elastic_rate_2G;
delete two_group_flux;
delete coll_rate_2G;
delete transport_rate_2G;
delete diffusion_rate_2G;
delete H1;
delete O16;
delete ZR90;
delete U235;
delete U238;
log_printf(RESULT, "*******************************************************"
"*************************");
log_printf(RESULT, "\t\t\t\tTiming Results");
log_printf(RESULT, "*******************************************************"
"*************************");
timer.printSplits();
}
