static void fdt_create(VersalVirt *s) { MachineClass *mc = MACHINE_GET_CLASS(s); int i; s->fdt = create_device_tree(&s->fdt_size); if (!s->fdt) { error_report("create_device_tree() failed"); exit(1); } /* Allocate all phandles. */ s->phandle.gic = qemu_fdt_alloc_phandle(s->fdt); for (i = 0; i < ARRAY_SIZE(s->phandle.ethernet_phy); i++) { s->phandle.ethernet_phy[i] = qemu_fdt_alloc_phandle(s->fdt); } s->phandle.clk_25Mhz = qemu_fdt_alloc_phandle(s->fdt); s->phandle.clk_125Mhz = qemu_fdt_alloc_phandle(s->fdt); /* Create /chosen node for load_dtb. */ qemu_fdt_add_subnode(s->fdt, "/chosen"); /* Header */ qemu_fdt_setprop_cell(s->fdt, "/", "interrupt-parent", s->phandle.gic); qemu_fdt_setprop_cell(s->fdt, "/", "#size-cells", 0x2); qemu_fdt_setprop_cell(s->fdt, "/", "#address-cells", 0x2); qemu_fdt_setprop_string(s->fdt, "/", "model", mc->desc); qemu_fdt_setprop_string(s->fdt, "/", "compatible", "xlnx-versal-virt"); }
static void create_dt_mpc8xxx_gpio(void *fdt, const char *soc, const char *mpic) { hwaddr mmio0 = MPC8XXX_GPIO_OFFSET; int irq0 = MPC8XXX_GPIO_IRQ; gchar *node = g_strdup_printf("%s/gpio@%"PRIx64, soc, mmio0); gchar *poweroff = g_strdup_printf("%s/power-off", soc); int gpio_ph; qemu_fdt_add_subnode(fdt, node); qemu_fdt_setprop_string(fdt, node, "compatible", "fsl,qoriq-gpio"); qemu_fdt_setprop_cells(fdt, node, "reg", mmio0, 0x1000); qemu_fdt_setprop_cells(fdt, node, "interrupts", irq0, 0x2); qemu_fdt_setprop_phandle(fdt, node, "interrupt-parent", mpic); qemu_fdt_setprop_cells(fdt, node, "#gpio-cells", 2); qemu_fdt_setprop(fdt, node, "gpio-controller", NULL, 0); gpio_ph = qemu_fdt_alloc_phandle(fdt); qemu_fdt_setprop_cell(fdt, node, "phandle", gpio_ph); qemu_fdt_setprop_cell(fdt, node, "linux,phandle", gpio_ph); /* Power Off Pin */ qemu_fdt_add_subnode(fdt, poweroff); qemu_fdt_setprop_string(fdt, poweroff, "compatible", "gpio-poweroff"); qemu_fdt_setprop_cells(fdt, poweroff, "gpios", gpio_ph, 0, 0); g_free(node); g_free(poweroff); }
static void fdt_add_gem_nodes(VersalVirt *s) { uint64_t addrs[] = { MM_GEM1, MM_GEM0 }; unsigned int irqs[] = { VERSAL_GEM1_IRQ_0, VERSAL_GEM0_IRQ_0 }; const char clocknames[] = "pclk\0hclk\0tx_clk\0rx_clk"; const char compat_gem[] = "cdns,zynqmp-gem\0cdns,gem"; int i; for (i = 0; i < ARRAY_SIZE(addrs); i++) { char *name = g_strdup_printf("/ethernet@%" PRIx64, addrs[i]); qemu_fdt_add_subnode(s->fdt, name); fdt_add_fixed_link_nodes(s, name, s->phandle.ethernet_phy[i]); qemu_fdt_setprop_string(s->fdt, name, "phy-mode", "rgmii-id"); qemu_fdt_setprop_cell(s->fdt, name, "phy-handle", s->phandle.ethernet_phy[i]); qemu_fdt_setprop_cells(s->fdt, name, "clocks", s->phandle.clk_25Mhz, s->phandle.clk_25Mhz, s->phandle.clk_25Mhz, s->phandle.clk_25Mhz); qemu_fdt_setprop(s->fdt, name, "clock-names", clocknames, sizeof(clocknames)); qemu_fdt_setprop_cells(s->fdt, name, "interrupts", GIC_FDT_IRQ_TYPE_SPI, irqs[i], GIC_FDT_IRQ_FLAGS_LEVEL_HI, GIC_FDT_IRQ_TYPE_SPI, irqs[i], GIC_FDT_IRQ_FLAGS_LEVEL_HI); qemu_fdt_setprop_sized_cells(s->fdt, name, "reg", 2, addrs[i], 2, 0x1000); qemu_fdt_setprop(s->fdt, name, "compatible", compat_gem, sizeof(compat_gem)); qemu_fdt_setprop_cell(s->fdt, name, "#address-cells", 1); qemu_fdt_setprop_cell(s->fdt, name, "#size-cells", 0); g_free(name); } }
static void fdt_add_clk_node(VersalVirt *s, const char *name, unsigned int freq_hz, uint32_t phandle) { qemu_fdt_add_subnode(s->fdt, name); qemu_fdt_setprop_cell(s->fdt, name, "phandle", phandle); qemu_fdt_setprop_cell(s->fdt, name, "clock-frequency", freq_hz); qemu_fdt_setprop_cell(s->fdt, name, "#clock-cells", 0x0); qemu_fdt_setprop_string(s->fdt, name, "compatible", "fixed-clock"); qemu_fdt_setprop(s->fdt, name, "u-boot,dm-pre-reloc", NULL, 0); }
int spapr_rtas_device_tree_setup(void *fdt, hwaddr rtas_addr, hwaddr rtas_size) { int ret; int i; ret = fdt_add_mem_rsv(fdt, rtas_addr, rtas_size); if (ret < 0) { fprintf(stderr, "Couldn't add RTAS reserve entry: %s\n", fdt_strerror(ret)); return ret; } ret = qemu_fdt_setprop_cell(fdt, "/rtas", "linux,rtas-base", rtas_addr); if (ret < 0) { fprintf(stderr, "Couldn't add linux,rtas-base property: %s\n", fdt_strerror(ret)); return ret; } ret = qemu_fdt_setprop_cell(fdt, "/rtas", "linux,rtas-entry", rtas_addr); if (ret < 0) { fprintf(stderr, "Couldn't add linux,rtas-entry property: %s\n", fdt_strerror(ret)); return ret; } ret = qemu_fdt_setprop_cell(fdt, "/rtas", "rtas-size", rtas_size); if (ret < 0) { fprintf(stderr, "Couldn't add rtas-size property: %s\n", fdt_strerror(ret)); return ret; } for (i = 0; i < TOKEN_MAX; i++) { struct rtas_call *call = &rtas_table[i]; if (!call->name) { continue; } ret = qemu_fdt_setprop_cell(fdt, "/rtas", call->name, i + TOKEN_BASE); if (ret < 0) { fprintf(stderr, "Couldn't add rtas token for %s: %s\n", call->name, fdt_strerror(ret)); return ret; } } return 0; }
static void fdt_add_fixed_link_nodes(VersalVirt *s, char *gemname, uint32_t phandle) { char *name = g_strdup_printf("%s/fixed-link", gemname); qemu_fdt_add_subnode(s->fdt, name); qemu_fdt_setprop_cell(s->fdt, name, "phandle", phandle); qemu_fdt_setprop(s->fdt, name, "full-duplex", NULL, 0); qemu_fdt_setprop_cell(s->fdt, name, "speed", 1000); g_free(name); }
static int xilinx_load_device_tree(hwaddr addr, uint32_t ramsize, hwaddr initrd_base, hwaddr initrd_size, const char *kernel_cmdline) { char *path; int fdt_size; void *fdt = NULL; int r; const char *dtb_filename; dtb_filename = qemu_opt_get(qemu_get_machine_opts(), "dtb"); if (dtb_filename) { fdt = load_device_tree(dtb_filename, &fdt_size); if (!fdt) { error_report("Error while loading device tree file '%s'", dtb_filename); } } else { /* Try the local "ppc.dtb" override. */ fdt = load_device_tree("ppc.dtb", &fdt_size); if (!fdt) { path = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE); if (path) { fdt = load_device_tree(path, &fdt_size); g_free(path); } } } if (!fdt) { return 0; } r = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", initrd_base); if (r < 0) { error_report("couldn't set /chosen/linux,initrd-start"); } r = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", (initrd_base + initrd_size)); if (r < 0) { error_report("couldn't set /chosen/linux,initrd-end"); } r = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", kernel_cmdline); if (r < 0) fprintf(stderr, "couldn't set /chosen/bootargs\n"); cpu_physical_memory_write(addr, fdt, fdt_size); return fdt_size; }
int qemu_fdt_setprop_phandle(void *fdt, const char *node_path, const char *property, const char *target_node_path) { uint32_t phandle = qemu_fdt_get_phandle(fdt, target_node_path); return qemu_fdt_setprop_cell(fdt, node_path, property, phandle); }
static void fdt_add_uart_nodes(VersalVirt *s) { uint64_t addrs[] = { MM_UART1, MM_UART0 }; unsigned int irqs[] = { VERSAL_UART1_IRQ_0, VERSAL_UART0_IRQ_0 }; const char compat[] = "arm,pl011\0arm,sbsa-uart"; const char clocknames[] = "uartclk\0apb_pclk"; int i; for (i = 0; i < ARRAY_SIZE(addrs); i++) { char *name = g_strdup_printf("/uart@%" PRIx64, addrs[i]); qemu_fdt_add_subnode(s->fdt, name); qemu_fdt_setprop_cell(s->fdt, name, "current-speed", 115200); qemu_fdt_setprop_cells(s->fdt, name, "clocks", s->phandle.clk_125Mhz, s->phandle.clk_125Mhz); qemu_fdt_setprop(s->fdt, name, "clock-names", clocknames, sizeof(clocknames)); qemu_fdt_setprop_cells(s->fdt, name, "interrupts", GIC_FDT_IRQ_TYPE_SPI, irqs[i], GIC_FDT_IRQ_FLAGS_LEVEL_HI); qemu_fdt_setprop_sized_cells(s->fdt, name, "reg", 2, addrs[i], 2, 0x1000); qemu_fdt_setprop(s->fdt, name, "compatible", compat, sizeof(compat)); qemu_fdt_setprop(s->fdt, name, "u-boot,dm-pre-reloc", NULL, 0); if (addrs[i] == MM_UART0) { /* Select UART0. */ qemu_fdt_setprop_string(s->fdt, "/chosen", "stdout-path", name); } g_free(name); } }
static void fdt_add_gic_nodes(VersalVirt *s) { char *nodename; nodename = g_strdup_printf("/gic@%x", MM_GIC_APU_DIST_MAIN); qemu_fdt_add_subnode(s->fdt, nodename); qemu_fdt_setprop_cell(s->fdt, nodename, "phandle", s->phandle.gic); qemu_fdt_setprop_cells(s->fdt, nodename, "interrupts", GIC_FDT_IRQ_TYPE_PPI, VERSAL_GIC_MAINT_IRQ, GIC_FDT_IRQ_FLAGS_LEVEL_HI); qemu_fdt_setprop(s->fdt, nodename, "interrupt-controller", NULL, 0); qemu_fdt_setprop_sized_cells(s->fdt, nodename, "reg", 2, MM_GIC_APU_DIST_MAIN, 2, MM_GIC_APU_DIST_MAIN_SIZE, 2, MM_GIC_APU_REDIST_0, 2, MM_GIC_APU_REDIST_0_SIZE); qemu_fdt_setprop_cell(s->fdt, nodename, "#interrupt-cells", 3); qemu_fdt_setprop_string(s->fdt, nodename, "compatible", "arm,gic-v3"); g_free(nodename); }
static void dt_serial_create(void *fdt, unsigned long long offset, const char *soc, const char *mpic, const char *alias, int idx, bool defcon) { char ser[128]; snprintf(ser, sizeof(ser), "%s/serial@%llx", soc, offset); qemu_fdt_add_subnode(fdt, ser); qemu_fdt_setprop_string(fdt, ser, "device_type", "serial"); qemu_fdt_setprop_string(fdt, ser, "compatible", "ns16550"); qemu_fdt_setprop_cells(fdt, ser, "reg", offset, 0x100); qemu_fdt_setprop_cell(fdt, ser, "cell-index", idx); qemu_fdt_setprop_cell(fdt, ser, "clock-frequency", 0); qemu_fdt_setprop_cells(fdt, ser, "interrupts", 42, 2); qemu_fdt_setprop_phandle(fdt, ser, "interrupt-parent", mpic); qemu_fdt_setprop_string(fdt, "/aliases", alias, ser); if (defcon) { qemu_fdt_setprop_string(fdt, "/chosen", "linux,stdout-path", ser); } }
static void fdt_add_cpu_nodes(VersalVirt *s, uint32_t psci_conduit) { int i; qemu_fdt_add_subnode(s->fdt, "/cpus"); qemu_fdt_setprop_cell(s->fdt, "/cpus", "#size-cells", 0x0); qemu_fdt_setprop_cell(s->fdt, "/cpus", "#address-cells", 1); for (i = XLNX_VERSAL_NR_ACPUS - 1; i >= 0; i--) { char *name = g_strdup_printf("/cpus/cpu@%d", i); ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(i)); qemu_fdt_add_subnode(s->fdt, name); qemu_fdt_setprop_cell(s->fdt, name, "reg", armcpu->mp_affinity); if (psci_conduit != QEMU_PSCI_CONDUIT_DISABLED) { qemu_fdt_setprop_string(s->fdt, name, "enable-method", "psci"); } qemu_fdt_setprop_string(s->fdt, name, "device_type", "cpu"); qemu_fdt_setprop_string(s->fdt, name, "compatible", armcpu->dtb_compatible); g_free(name); } }
static int microblaze_load_dtb(hwaddr addr, uint32_t ramsize, uint32_t initrd_start, uint32_t initrd_end, const char *kernel_cmdline, const char *dtb_filename) { int fdt_size; void *fdt = NULL; int r; if (dtb_filename) { fdt = load_device_tree(dtb_filename, &fdt_size); } if (!fdt) { return 0; } if (kernel_cmdline) { r = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", kernel_cmdline); if (r < 0) { fprintf(stderr, "couldn't set /chosen/bootargs\n"); } } if (initrd_start) { qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", initrd_start); qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", initrd_end); } cpu_physical_memory_write(addr, fdt, fdt_size); return fdt_size; }
static int ppce500_load_device_tree(QEMUMachineInitArgs *args, PPCE500Params *params, hwaddr addr, hwaddr initrd_base, hwaddr initrd_size, bool dry_run) { CPUPPCState *env = first_cpu->env_ptr; int ret = -1; uint64_t mem_reg_property[] = { 0, cpu_to_be64(args->ram_size) }; int fdt_size; void *fdt; uint8_t hypercall[16]; uint32_t clock_freq = 400000000; uint32_t tb_freq = 400000000; int i; char compatible_sb[] = "fsl,mpc8544-immr\0simple-bus"; char soc[128]; char mpic[128]; uint32_t mpic_ph; uint32_t msi_ph; char gutil[128]; char pci[128]; char msi[128]; uint32_t *pci_map = NULL; int len; uint32_t pci_ranges[14] = { 0x2000000, 0x0, 0xc0000000, 0x0, 0xc0000000, 0x0, 0x20000000, 0x1000000, 0x0, 0x0, 0x0, 0xe1000000, 0x0, 0x10000, }; QemuOpts *machine_opts = qemu_get_machine_opts(); const char *dtb_file = qemu_opt_get(machine_opts, "dtb"); const char *toplevel_compat = qemu_opt_get(machine_opts, "dt_compatible"); if (dtb_file) { char *filename; filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, dtb_file); if (!filename) { goto out; } fdt = load_device_tree(filename, &fdt_size); if (!fdt) { goto out; } goto done; } fdt = create_device_tree(&fdt_size); if (fdt == NULL) { goto out; } /* Manipulate device tree in memory. */ qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 2); qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 2); qemu_fdt_add_subnode(fdt, "/memory"); qemu_fdt_setprop_string(fdt, "/memory", "device_type", "memory"); qemu_fdt_setprop(fdt, "/memory", "reg", mem_reg_property, sizeof(mem_reg_property)); qemu_fdt_add_subnode(fdt, "/chosen"); if (initrd_size) { ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", initrd_base); if (ret < 0) { fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n"); } ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", (initrd_base + initrd_size)); if (ret < 0) { fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n"); } } ret = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", args->kernel_cmdline); if (ret < 0) fprintf(stderr, "couldn't set /chosen/bootargs\n"); if (kvm_enabled()) { /* Read out host's frequencies */ clock_freq = kvmppc_get_clockfreq(); tb_freq = kvmppc_get_tbfreq(); /* indicate KVM hypercall interface */ qemu_fdt_add_subnode(fdt, "/hypervisor"); qemu_fdt_setprop_string(fdt, "/hypervisor", "compatible", "linux,kvm"); kvmppc_get_hypercall(env, hypercall, sizeof(hypercall)); qemu_fdt_setprop(fdt, "/hypervisor", "hcall-instructions", hypercall, sizeof(hypercall)); /* if KVM supports the idle hcall, set property indicating this */ if (kvmppc_get_hasidle(env)) { qemu_fdt_setprop(fdt, "/hypervisor", "has-idle", NULL, 0); } } /* Create CPU nodes */ qemu_fdt_add_subnode(fdt, "/cpus"); qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 1); qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0); /* We need to generate the cpu nodes in reverse order, so Linux can pick the first node as boot node and be happy */ for (i = smp_cpus - 1; i >= 0; i--) { CPUState *cpu; PowerPCCPU *pcpu; char cpu_name[128]; uint64_t cpu_release_addr = MPC8544_SPIN_BASE + (i * 0x20); cpu = qemu_get_cpu(i); if (cpu == NULL) { continue; } env = cpu->env_ptr; pcpu = POWERPC_CPU(cpu); snprintf(cpu_name, sizeof(cpu_name), "/cpus/PowerPC,8544@%x", ppc_get_vcpu_dt_id(pcpu)); qemu_fdt_add_subnode(fdt, cpu_name); qemu_fdt_setprop_cell(fdt, cpu_name, "clock-frequency", clock_freq); qemu_fdt_setprop_cell(fdt, cpu_name, "timebase-frequency", tb_freq); qemu_fdt_setprop_string(fdt, cpu_name, "device_type", "cpu"); qemu_fdt_setprop_cell(fdt, cpu_name, "reg", ppc_get_vcpu_dt_id(pcpu)); qemu_fdt_setprop_cell(fdt, cpu_name, "d-cache-line-size", env->dcache_line_size); qemu_fdt_setprop_cell(fdt, cpu_name, "i-cache-line-size", env->icache_line_size); qemu_fdt_setprop_cell(fdt, cpu_name, "d-cache-size", 0x8000); qemu_fdt_setprop_cell(fdt, cpu_name, "i-cache-size", 0x8000); qemu_fdt_setprop_cell(fdt, cpu_name, "bus-frequency", 0); if (cpu->cpu_index) { qemu_fdt_setprop_string(fdt, cpu_name, "status", "disabled"); qemu_fdt_setprop_string(fdt, cpu_name, "enable-method", "spin-table"); qemu_fdt_setprop_u64(fdt, cpu_name, "cpu-release-addr", cpu_release_addr); } else { qemu_fdt_setprop_string(fdt, cpu_name, "status", "okay"); } } qemu_fdt_add_subnode(fdt, "/aliases"); /* XXX These should go into their respective devices' code */ snprintf(soc, sizeof(soc), "/soc@%llx", MPC8544_CCSRBAR_BASE); qemu_fdt_add_subnode(fdt, soc); qemu_fdt_setprop_string(fdt, soc, "device_type", "soc"); qemu_fdt_setprop(fdt, soc, "compatible", compatible_sb, sizeof(compatible_sb)); qemu_fdt_setprop_cell(fdt, soc, "#address-cells", 1); qemu_fdt_setprop_cell(fdt, soc, "#size-cells", 1); qemu_fdt_setprop_cells(fdt, soc, "ranges", 0x0, MPC8544_CCSRBAR_BASE >> 32, MPC8544_CCSRBAR_BASE, MPC8544_CCSRBAR_SIZE); /* XXX should contain a reasonable value */ qemu_fdt_setprop_cell(fdt, soc, "bus-frequency", 0); snprintf(mpic, sizeof(mpic), "%s/pic@%llx", soc, MPC8544_MPIC_REGS_OFFSET); qemu_fdt_add_subnode(fdt, mpic); qemu_fdt_setprop_string(fdt, mpic, "device_type", "open-pic"); qemu_fdt_setprop_string(fdt, mpic, "compatible", "fsl,mpic"); qemu_fdt_setprop_cells(fdt, mpic, "reg", MPC8544_MPIC_REGS_OFFSET, 0x40000); qemu_fdt_setprop_cell(fdt, mpic, "#address-cells", 0); qemu_fdt_setprop_cell(fdt, mpic, "#interrupt-cells", 2); mpic_ph = qemu_fdt_alloc_phandle(fdt); qemu_fdt_setprop_cell(fdt, mpic, "phandle", mpic_ph); qemu_fdt_setprop_cell(fdt, mpic, "linux,phandle", mpic_ph); qemu_fdt_setprop(fdt, mpic, "interrupt-controller", NULL, 0); /* * We have to generate ser1 first, because Linux takes the first * device it finds in the dt as serial output device. And we generate * devices in reverse order to the dt. */ dt_serial_create(fdt, MPC8544_SERIAL1_REGS_OFFSET, soc, mpic, "serial1", 1, false); dt_serial_create(fdt, MPC8544_SERIAL0_REGS_OFFSET, soc, mpic, "serial0", 0, true); snprintf(gutil, sizeof(gutil), "%s/global-utilities@%llx", soc, MPC8544_UTIL_OFFSET); qemu_fdt_add_subnode(fdt, gutil); qemu_fdt_setprop_string(fdt, gutil, "compatible", "fsl,mpc8544-guts"); qemu_fdt_setprop_cells(fdt, gutil, "reg", MPC8544_UTIL_OFFSET, 0x1000); qemu_fdt_setprop(fdt, gutil, "fsl,has-rstcr", NULL, 0); snprintf(msi, sizeof(msi), "/%s/msi@%llx", soc, MPC8544_MSI_REGS_OFFSET); qemu_fdt_add_subnode(fdt, msi); qemu_fdt_setprop_string(fdt, msi, "compatible", "fsl,mpic-msi"); qemu_fdt_setprop_cells(fdt, msi, "reg", MPC8544_MSI_REGS_OFFSET, 0x200); msi_ph = qemu_fdt_alloc_phandle(fdt); qemu_fdt_setprop_cells(fdt, msi, "msi-available-ranges", 0x0, 0x100); qemu_fdt_setprop_phandle(fdt, msi, "interrupt-parent", mpic); qemu_fdt_setprop_cells(fdt, msi, "interrupts", 0xe0, 0x0, 0xe1, 0x0, 0xe2, 0x0, 0xe3, 0x0, 0xe4, 0x0, 0xe5, 0x0, 0xe6, 0x0, 0xe7, 0x0); qemu_fdt_setprop_cell(fdt, msi, "phandle", msi_ph); qemu_fdt_setprop_cell(fdt, msi, "linux,phandle", msi_ph); snprintf(pci, sizeof(pci), "/pci@%llx", MPC8544_PCI_REGS_BASE); qemu_fdt_add_subnode(fdt, pci); qemu_fdt_setprop_cell(fdt, pci, "cell-index", 0); qemu_fdt_setprop_string(fdt, pci, "compatible", "fsl,mpc8540-pci"); qemu_fdt_setprop_string(fdt, pci, "device_type", "pci"); qemu_fdt_setprop_cells(fdt, pci, "interrupt-map-mask", 0xf800, 0x0, 0x0, 0x7); pci_map = pci_map_create(fdt, qemu_fdt_get_phandle(fdt, mpic), params->pci_first_slot, params->pci_nr_slots, &len); qemu_fdt_setprop(fdt, pci, "interrupt-map", pci_map, len); qemu_fdt_setprop_phandle(fdt, pci, "interrupt-parent", mpic); qemu_fdt_setprop_cells(fdt, pci, "interrupts", 24, 2); qemu_fdt_setprop_cells(fdt, pci, "bus-range", 0, 255); for (i = 0; i < 14; i++) { pci_ranges[i] = cpu_to_be32(pci_ranges[i]); } qemu_fdt_setprop_cell(fdt, pci, "fsl,msi", msi_ph); qemu_fdt_setprop(fdt, pci, "ranges", pci_ranges, sizeof(pci_ranges)); qemu_fdt_setprop_cells(fdt, pci, "reg", MPC8544_PCI_REGS_BASE >> 32, MPC8544_PCI_REGS_BASE, 0, 0x1000); qemu_fdt_setprop_cell(fdt, pci, "clock-frequency", 66666666); qemu_fdt_setprop_cell(fdt, pci, "#interrupt-cells", 1); qemu_fdt_setprop_cell(fdt, pci, "#size-cells", 2); qemu_fdt_setprop_cell(fdt, pci, "#address-cells", 3); qemu_fdt_setprop_string(fdt, "/aliases", "pci0", pci); params->fixup_devtree(params, fdt); if (toplevel_compat) { qemu_fdt_setprop(fdt, "/", "compatible", toplevel_compat, strlen(toplevel_compat) + 1); } done: if (!dry_run) { qemu_fdt_dumpdtb(fdt, fdt_size); cpu_physical_memory_write(addr, fdt, fdt_size); } ret = fdt_size; out: g_free(pci_map); return ret; }
static int bamboo_load_device_tree(hwaddr addr, uint32_t ramsize, hwaddr initrd_base, hwaddr initrd_size, const char *kernel_cmdline) { int ret = -1; uint32_t mem_reg_property[] = { 0, 0, cpu_to_be32(ramsize) }; char *filename; int fdt_size; void *fdt; uint32_t tb_freq = 400000000; uint32_t clock_freq = 400000000; filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE); if (!filename) { goto out; } fdt = load_device_tree(filename, &fdt_size); g_free(filename); if (fdt == NULL) { goto out; } /* Manipulate device tree in memory. */ ret = qemu_fdt_setprop(fdt, "/memory", "reg", mem_reg_property, sizeof(mem_reg_property)); if (ret < 0) fprintf(stderr, "couldn't set /memory/reg\n"); ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", initrd_base); if (ret < 0) fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n"); ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", (initrd_base + initrd_size)); if (ret < 0) fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n"); ret = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", kernel_cmdline); if (ret < 0) fprintf(stderr, "couldn't set /chosen/bootargs\n"); /* Copy data from the host device tree into the guest. Since the guest can * directly access the timebase without host involvement, we must expose * the correct frequencies. */ if (kvm_enabled()) { tb_freq = kvmppc_get_tbfreq(); clock_freq = kvmppc_get_clockfreq(); } qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "clock-frequency", clock_freq); qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "timebase-frequency", tb_freq); rom_add_blob_fixed(BINARY_DEVICE_TREE_FILE, fdt, fdt_size, addr); g_free(fdt); return 0; out: return ret; }
static void microblaze_generic_fdt_init(MachineState *machine) { CPUState *cpu; ram_addr_t ram_kernel_base = 0, ram_kernel_size = 0; void *fdt = NULL; const char *dtb_arg, *hw_dtb_arg; QemuOpts *machine_opts; int fdt_size; /* for memory node */ char node_path[DT_PATH_LENGTH]; FDTMachineInfo *fdti; MemoryRegion *main_mem; /* For DMA node */ char dma_path[DT_PATH_LENGTH] = { 0 }; uint32_t memory_phandle; /* For Ethernet nodes */ char **eth_paths; char *phy_path; char *mdio_path; uint32_t n_eth; uint32_t prop_val; machine_opts = qemu_opts_find(qemu_find_opts("machine"), 0); if (!machine_opts) { goto no_dtb_arg; } dtb_arg = qemu_opt_get(machine_opts, "dtb"); hw_dtb_arg = qemu_opt_get(machine_opts, "hw-dtb"); if (!dtb_arg && !hw_dtb_arg) { goto no_dtb_arg; } /* If the user only provided a -dtb, use it as the hw description. */ if (!hw_dtb_arg) { hw_dtb_arg = dtb_arg; } fdt = load_device_tree(hw_dtb_arg, &fdt_size); if (!fdt) { hw_error("Error: Unable to load Device Tree %s\n", hw_dtb_arg); return; } if (IS_PETALINUX_MACHINE) { /* Mark the simple-bus as incompatible as it breaks the Microblaze * PetaLinux boot */ add_to_compat_table(NULL, "compatible:simple-bus", NULL); } /* find memory node or add new one if needed */ while (qemu_fdt_get_node_by_name(fdt, node_path, "memory")) { qemu_fdt_add_subnode(fdt, "/memory@0"); qemu_fdt_setprop_cells(fdt, "/memory@0", "reg", 0, machine->ram_size); } if (!qemu_fdt_getprop(fdt, "/memory", "compatible", NULL, 0, NULL)) { qemu_fdt_setprop_string(fdt, "/memory", "compatible", "qemu:memory-region"); qemu_fdt_setprop_cells(fdt, "/memory", "qemu,ram", 1); } if (IS_PETALINUX_MACHINE) { /* If using a *-plnx machine, the AXI DMA memory links are not included * in the DTB by default. To avoid seg faults, add the links in here if * they have not already been added by the user */ qemu_fdt_get_node_by_name(fdt, dma_path, "dma"); if (strcmp(dma_path, "") != 0) { memory_phandle = qemu_fdt_check_phandle(fdt, node_path); if (!memory_phandle) { memory_phandle = qemu_fdt_alloc_phandle(fdt); qemu_fdt_setprop_cells(fdt, "/memory", "linux,phandle", memory_phandle); qemu_fdt_setprop_cells(fdt, "/memory", "phandle", memory_phandle); } if (!qemu_fdt_getprop(fdt, dma_path, "sg", NULL, 0, NULL)) { qemu_fdt_setprop_phandle(fdt, dma_path, "sg", node_path); } if (!qemu_fdt_getprop(fdt, dma_path, "s2mm", NULL, 0, NULL)) { qemu_fdt_setprop_phandle(fdt, dma_path, "s2mm", node_path); } if (!qemu_fdt_getprop(fdt, dma_path, "mm2s", NULL, 0, NULL)) { qemu_fdt_setprop_phandle(fdt, dma_path, "mm2s", node_path); } } /* Copy phyaddr value from phy node reg property */ n_eth = qemu_fdt_get_n_nodes_by_name(fdt, ð_paths, "ethernet"); while (n_eth--) { mdio_path = qemu_fdt_get_child_by_name(fdt, eth_paths[n_eth], "mdio"); if (mdio_path) { phy_path = qemu_fdt_get_child_by_name(fdt, mdio_path, "phy"); if (phy_path) { prop_val = qemu_fdt_getprop_cell(fdt, phy_path, "reg", NULL, 0, NULL, &error_abort); qemu_fdt_setprop_cell(fdt, eth_paths[n_eth], "xlnx,phyaddr", prop_val); g_free(phy_path); } else { qemu_log_mask(LOG_GUEST_ERROR, "phy not found in %s", mdio_path); } g_free(mdio_path); } g_free(eth_paths[n_eth]); } g_free(eth_paths); } /* Instantiate peripherals from the FDT. */ fdti = fdt_generic_create_machine(fdt, NULL); main_mem = MEMORY_REGION(object_resolve_path(node_path, NULL)); ram_kernel_base = object_property_get_int(OBJECT(main_mem), "addr", NULL); ram_kernel_size = object_property_get_int(OBJECT(main_mem), "size", NULL); if (!memory_region_is_mapped(main_mem)) { /* If the memory region is not mapped, map it here. * It has to be mapped somewhere, so guess that the base address * is where the kernel starts */ memory_region_add_subregion(get_system_memory(), ram_kernel_base, main_mem); if (ram_kernel_base && IS_PETALINUX_MACHINE) { /* If the memory added is at an offset from zero QEMU will error * when an ISR/exception is triggered. Add a small amount of hack * RAM to handle this. */ MemoryRegion *hack_ram = g_new(MemoryRegion, 1); memory_region_init_ram(hack_ram, NULL, "hack_ram", 0x1000, &error_abort); vmstate_register_ram_global(hack_ram); memory_region_add_subregion(get_system_memory(), 0, hack_ram); } } fdt_init_destroy_fdti(fdti); fdt_g = fdt; microblaze_load_kernel(MICROBLAZE_CPU(first_cpu), ram_kernel_base, ram_kernel_size, machine->initrd_filename, NULL, microblaze_generic_fdt_reset, 0, fdt, fdt_size); /* Register FDT to prop mapper for secondary cores. */ cpu = CPU_NEXT(first_cpu); while (cpu) { qemu_register_reset(secondary_cpu_reset, cpu); cpu = CPU_NEXT(cpu); } return; no_dtb_arg: if (!QTEST_RUNNING) { hw_error("DTB must be specified for %s machine model\n", MACHINE_NAME); } return; }