C++ (Cpp) u8g_dev_pb16v1_base_fn 예제들

예제 #1

파일: u8g_dev_ssd1325_nhd27oled_bw.c 프로젝트: azad26195/marlin-based-ace-firmware

uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
  switch(msg)
  {
    case U8G_DEV_MSG_INIT:
      u8g_InitCom(u8g, dev);
      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_1bit_nhd_27_12864ucy3_init_seq);
      break;
    case U8G_DEV_MSG_STOP:
      break;
    case U8G_DEV_MSG_PAGE_NEXT:
      {
        u8g_dev_ssd1325_1bit_2x_prepare_page(u8g, dev, 0);
        u8g_dev_ssd1325_1bit_write_buffer(u8g, dev, 0);
        u8g_dev_ssd1325_1bit_2x_prepare_page(u8g, dev, 1);
        u8g_dev_ssd1325_1bit_write_buffer(u8g, dev, 1);
        u8g_SetChipSelect(u8g, dev, 0);        
      }
      break;
    case U8G_DEV_MSG_CONTRAST:
      u8g_SetChipSelect(u8g, dev, 1);
      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
      u8g_WriteByte(u8g, dev, 0x081);
      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
      u8g_SetChipSelect(u8g, dev, 0);      
      break;
  }
  return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}

예제 #2

파일: u8g_dev_uc1610_dogxl160.cpp 프로젝트: pkourany/u8glibSpark

uint8_t u8g_dev_uc1610_dogxl160_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
  switch(msg)
  {
    case U8G_DEV_MSG_INIT:
      u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
      u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_init_seq);
      break;
    case U8G_DEV_MSG_STOP:
      break;
    case U8G_DEV_MSG_PAGE_NEXT:
      {
        int i;
        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
        
        u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_data_start);    
        u8g_WriteByte(u8g, dev, 0x060 | (pb->p.page*4) ); /* select current page 1/2 (UC1610) */
        u8g_SetAddress(u8g, dev, 1);           /* data mode */
        for( i = 0; i < WIDTH; i++ )
        {
          u8g_WriteByte(u8g, dev, u8g_dev_1to2( ((uint8_t *)(pb->buf))[i] ) );          
        }

        u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_data_start);    
        u8g_WriteByte(u8g, dev, 0x060 | (pb->p.page*4+1) ); /* select current page 2/2 (UC1610) */
        u8g_SetAddress(u8g, dev, 1);           /* data mode */
        for( i = 0; i < WIDTH; i++ )
        {
          u8g_WriteByte(u8g, dev, u8g_dev_1to2( ((uint8_t *)(pb->buf))[i] >> 4 ) );          
        }

        u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_data_start);    
        u8g_WriteByte(u8g, dev, 0x060 | (pb->p.page*4+2) ); /* select current page 1/2 (UC1610) */
        u8g_SetAddress(u8g, dev, 1);           /* data mode */
        for( i = 0; i < WIDTH; i++ )
        {
          u8g_WriteByte(u8g, dev, u8g_dev_1to2( ((uint8_t *)((uint8_t *)(pb->buf)+WIDTH))[i] ) );          
        }

        u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1610_dogxl160_data_start);    
        u8g_WriteByte(u8g, dev, 0x060 | (pb->p.page*4+3) ); /* select current page 2/2 (UC1610) */
        u8g_SetAddress(u8g, dev, 1);           /* data mode */
        for( i = 0; i < WIDTH; i++ )
        {
          u8g_WriteByte(u8g, dev, u8g_dev_1to2( ((uint8_t *)((uint8_t *)(pb->buf)+WIDTH))[i] >> 4 ) );          
        }
        
        u8g_SetChipSelect(u8g, dev, 0);
      }
      break;
    case U8G_DEV_MSG_CONTRAST:
      u8g_SetChipSelect(u8g, dev, 1);
      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
      u8g_WriteByte(u8g, dev, 0x081);
      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
      u8g_SetChipSelect(u8g, dev, 0);      
      return 1;
  }
  return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}

예제 #3

파일: u8g_dev_st7565_lm6059.c 프로젝트: whdlgp/Cupdrone_for_cpp

uint8_t u8g_dev_st7565_lm6059_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
  switch(msg)
  {
    case U8G_DEV_MSG_INIT:
      u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_400NS);
      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_init_seq);
      break;
    case U8G_DEV_MSG_STOP:
      break;
    case U8G_DEV_MSG_PAGE_NEXT:
      {
        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
	
        u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_data_start);    
        u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page)); /* select current page (ST7565R) */
        u8g_SetAddress(u8g, dev, 1);           /* data mode */
	u8g_WriteSequence(u8g, dev, pb->width, pb->buf); 
        u8g_SetChipSelect(u8g, dev, 0);

	u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_data_start);    
        u8g_WriteByte(u8g, dev, 0x0b0 | (2*pb->p.page+1)); /* select current page (ST7565R) */
        u8g_SetAddress(u8g, dev, 1);           /* data mode */
	u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width); 
        u8g_SetChipSelect(u8g, dev, 0);
      }
      break;
    case U8G_DEV_MSG_CONTRAST:
      u8g_SetChipSelect(u8g, dev, 1);
      u8g_SetAddress(u8g, dev, 0);          /* instruction mode */
      u8g_WriteByte(u8g, dev, 0x081);
      u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
      u8g_SetChipSelect(u8g, dev, 0);      
      return 1;
    case U8G_DEV_MSG_SLEEP_ON:
      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_sleep_on);    
      return 1;
    case U8G_DEV_MSG_SLEEP_OFF:
      u8g_WriteEscSeqP(u8g, dev, u8g_dev_st7565_lm6059_sleep_off);    
      return 1;
  }
  return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}

예제 #4

파일: u8g_dev_ssd1306_128x32.c 프로젝트: dima3dprinters/DIMA-LT

uint8_t u8g_dev_ssd1306_128x32_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
  switch(msg)
  {
    case U8G_DEV_MSG_INIT:
      u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_init_seq);
      break;
    case U8G_DEV_MSG_STOP:
      break;
    case U8G_DEV_MSG_PAGE_NEXT:
      {
        u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);

        u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_data_start);
        u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2));	/* select current page (SSD1306) */
        u8g_SetAddress(u8g, dev, 1);					/* data mode */
	u8g_WriteSequence(u8g, dev, pb->width, (uint8_t*)pb->buf);
        u8g_SetChipSelect(u8g, dev, 0);

        u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1306_128x32_data_start);
        u8g_WriteByte(u8g, dev, 0x0b0 | (pb->p.page*2+1));	/* select current page (SSD1306) */
        u8g_SetAddress(u8g, dev, 1);					/* data mode */
	u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
        u8g_SetChipSelect(u8g, dev, 0);
      }
      break;
    case U8G_DEV_MSG_SLEEP_ON:
      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);
      return 1;
    case U8G_DEV_MSG_SLEEP_OFF:
      u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);
      return 1;
  }
  return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}