static int __init mtd_speedtest_init(void)
{
	int err, i, blocks, j, k;
	long speed;
	uint64_t tmp;

	printk(KERN_INFO "\n");
	printk(KERN_INFO "=================================================\n");

	if (dev < 0) {
		printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
		printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
		return -EINVAL;
	}

	if (count)
		printk(PRINT_PREF "MTD device: %d    count: %d\n", dev, count);
	else
		printk(PRINT_PREF "MTD device: %d\n", dev);

	mtd = get_mtd_device(NULL, dev);
	if (IS_ERR(mtd)) {
		err = PTR_ERR(mtd);
		printk(PRINT_PREF "error: cannot get MTD device\n");
		return err;
	}

	if (mtd->writesize == 1) {
		printk(PRINT_PREF "not NAND flash, assume page size is 512 "
		       "bytes.\n");
		pgsize = 512;
	} else
		pgsize = mtd->writesize;

	tmp = mtd->size;
	do_div(tmp, mtd->erasesize);
	ebcnt = tmp;
	pgcnt = mtd->erasesize / pgsize;

	printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
	       "page size %u, count of eraseblocks %u, pages per "
	       "eraseblock %u, OOB size %u\n",
	       (unsigned long long)mtd->size, mtd->erasesize,
	       pgsize, ebcnt, pgcnt, mtd->oobsize);

	if (count > 0 && count < ebcnt)
		ebcnt = count;

	err = -ENOMEM;
	iobuf = kmalloc(mtd->erasesize, GFP_KERNEL);
	if (!iobuf) {
		printk(PRINT_PREF "error: cannot allocate memory\n");
		goto out;
	}

	simple_srand(1);
	set_random_data(iobuf, mtd->erasesize);

	err = scan_for_bad_eraseblocks();
	if (err)
		goto out;

	err = erase_whole_device();
	if (err)
		goto out;

	/* Write all eraseblocks, 1 eraseblock at a time */
	printk(PRINT_PREF "testing eraseblock write speed\n");
	start_timing();
	for (i = 0; i < ebcnt; ++i) {
		if (bbt[i])
			continue;
		err = write_eraseblock(i);
		if (err)
			goto out;
		cond_resched();
	}
	stop_timing();
	speed = calc_speed();
	printk(PRINT_PREF "eraseblock write speed is %ld KiB/s\n", speed);

	/* Read all eraseblocks, 1 eraseblock at a time */
	printk(PRINT_PREF "testing eraseblock read speed\n");
	start_timing();
	for (i = 0; i < ebcnt; ++i) {
		if (bbt[i])
			continue;
		err = read_eraseblock(i);
		if (err)
			goto out;
		cond_resched();
	}
	stop_timing();
	speed = calc_speed();
	printk(PRINT_PREF "eraseblock read speed is %ld KiB/s\n", speed);

	err = erase_whole_device();
	if (err)
		goto out;

	/* Write all eraseblocks, 1 page at a time */
	printk(PRINT_PREF "testing page write speed\n");
	start_timing();
	for (i = 0; i < ebcnt; ++i) {
		if (bbt[i])
			continue;
		err = write_eraseblock_by_page(i);
		if (err)
			goto out;
		cond_resched();
	}
	stop_timing();
	speed = calc_speed();
	printk(PRINT_PREF "page write speed is %ld KiB/s\n", speed);

	/* Read all eraseblocks, 1 page at a time */
	printk(PRINT_PREF "testing page read speed\n");
	start_timing();
	for (i = 0; i < ebcnt; ++i) {
		if (bbt[i])
			continue;
		err = read_eraseblock_by_page(i);
		if (err)
			goto out;
		cond_resched();
	}
	stop_timing();
	speed = calc_speed();
	printk(PRINT_PREF "page read speed is %ld KiB/s\n", speed);

	err = erase_whole_device();
	if (err)
		goto out;

	/* Write all eraseblocks, 2 pages at a time */
	printk(PRINT_PREF "testing 2 page write speed\n");
	start_timing();
	for (i = 0; i < ebcnt; ++i) {
		if (bbt[i])
			continue;
		err = write_eraseblock_by_2pages(i);
		if (err)
			goto out;
		cond_resched();
	}
	stop_timing();
	speed = calc_speed();
	printk(PRINT_PREF "2 page write speed is %ld KiB/s\n", speed);

	/* Read all eraseblocks, 2 pages at a time */
	printk(PRINT_PREF "testing 2 page read speed\n");
	start_timing();
	for (i = 0; i < ebcnt; ++i) {
		if (bbt[i])
			continue;
		err = read_eraseblock_by_2pages(i);
		if (err)
			goto out;
		cond_resched();
	}
	stop_timing();
	speed = calc_speed();
	printk(PRINT_PREF "2 page read speed is %ld KiB/s\n", speed);

	/* Erase all eraseblocks */
	printk(PRINT_PREF "Testing erase speed\n");
	start_timing();
	for (i = 0; i < ebcnt; ++i) {
		if (bbt[i])
			continue;
		err = erase_eraseblock(i);
		if (err)
			goto out;
		cond_resched();
	}
	stop_timing();
	speed = calc_speed();
	printk(PRINT_PREF "erase speed is %ld KiB/s\n", speed);

	/* Multi-block erase all eraseblocks */
	for (k = 1; k < 7; k++) {
		blocks = 1 << k;
		printk(PRINT_PREF "Testing %dx multi-block erase speed\n",
		       blocks);
		start_timing();
		for (i = 0; i < ebcnt; ) {
			for (j = 0; j < blocks && (i + j) < ebcnt; j++)
				if (bbt[i + j])
					break;
			if (j < 1) {
				i++;
				continue;
			}
			err = multiblock_erase(i, j);
			if (err)
				goto out;
			cond_resched();
			i += j;
		}
		stop_timing();
		speed = calc_speed();
		printk(PRINT_PREF "%dx multi-block erase speed is %ld KiB/s\n",
		       blocks, speed);
	}
	printk(PRINT_PREF "finished\n");
out:
	kfree(iobuf);
	kfree(bbt);
	put_mtd_device(mtd);
	if (err)
		printk(PRINT_PREF "error %d occurred\n", err);
	printk(KERN_INFO "=================================================\n");
	return err;
}
예제 #2
0
static int __init mtd_speedtest_init(void)
{
	int err, i;
	long speed;
	uint64_t tmp;

	printk(KERN_INFO "\n");
	printk(KERN_INFO "=================================================\n");
	printk(PRINT_PREF "MTD device: %d\n", dev);

	mtd = get_mtd_device(NULL, dev);
	if (IS_ERR(mtd)) {
		err = PTR_ERR(mtd);
		printk(PRINT_PREF "error: cannot get MTD device\n");
		return err;
	}

	if (mtd->writesize == 1) {
		printk(PRINT_PREF "not NAND flash, assume page size is 512 "
		       "bytes.\n");
		pgsize = 512;
	} else
		pgsize = mtd->writesize;

	tmp = mtd->size;
	do_div(tmp, mtd->erasesize);
	ebcnt = tmp;
	pgcnt = mtd->erasesize / pgsize;

	printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
	       "page size %u, count of eraseblocks %u, pages per "
	       "eraseblock %u, OOB size %u\n",
	       (unsigned long long)mtd->size, mtd->erasesize,
	       pgsize, ebcnt, pgcnt, mtd->oobsize);

	err = -ENOMEM;
	iobuf = kmalloc(mtd->erasesize, GFP_KERNEL);
	if (!iobuf) {
		printk(PRINT_PREF "error: cannot allocate memory\n");
		goto out;
	}

	simple_srand(1);
	set_random_data(iobuf, mtd->erasesize);

	err = scan_for_bad_eraseblocks();
	if (err)
		goto out;

	err = erase_whole_device();
	if (err)
		goto out;

	/* Write all eraseblocks, 1 eraseblock at a time */
	printk(PRINT_PREF "testing eraseblock write speed\n");
	start_timing();
	for (i = 0; i < ebcnt; ++i) {
		if (bbt[i])
			continue;
		err = write_eraseblock(i);
		if (err)
			goto out;
		cond_resched();
	}
	stop_timing();
	speed = calc_speed();
	printk(PRINT_PREF "eraseblock write speed is %ld KiB/s\n", speed);

	/* Read all eraseblocks, 1 eraseblock at a time */
	printk(PRINT_PREF "testing eraseblock read speed\n");
	start_timing();
	for (i = 0; i < ebcnt; ++i) {
		if (bbt[i])
			continue;
		err = read_eraseblock(i);
		if (err)
			goto out;
		cond_resched();
	}
	stop_timing();
	speed = calc_speed();
	printk(PRINT_PREF "eraseblock read speed is %ld KiB/s\n", speed);

	err = erase_whole_device();
	if (err)
		goto out;

	/* Write all eraseblocks, 1 page at a time */
	printk(PRINT_PREF "testing page write speed\n");
	start_timing();
	for (i = 0; i < ebcnt; ++i) {
		if (bbt[i])
			continue;
		err = write_eraseblock_by_page(i);
		if (err)
			goto out;
		cond_resched();
	}
	stop_timing();
	speed = calc_speed();
	printk(PRINT_PREF "page write speed is %ld KiB/s\n", speed);

	/* Read all eraseblocks, 1 page at a time */
	printk(PRINT_PREF "testing page read speed\n");
	start_timing();
	for (i = 0; i < ebcnt; ++i) {
		if (bbt[i])
			continue;
		err = read_eraseblock_by_page(i);
		if (err)
			goto out;
		cond_resched();
	}
	stop_timing();
	speed = calc_speed();
	printk(PRINT_PREF "page read speed is %ld KiB/s\n", speed);

	err = erase_whole_device();
	if (err)
		goto out;

	/* Write all eraseblocks, 2 pages at a time */
	printk(PRINT_PREF "testing 2 page write speed\n");
	start_timing();
	for (i = 0; i < ebcnt; ++i) {
		if (bbt[i])
			continue;
		err = write_eraseblock_by_2pages(i);
		if (err)
			goto out;
		cond_resched();
	}
	stop_timing();
	speed = calc_speed();
	printk(PRINT_PREF "2 page write speed is %ld KiB/s\n", speed);

	/* Read all eraseblocks, 2 pages at a time */
	printk(PRINT_PREF "testing 2 page read speed\n");
	start_timing();
	for (i = 0; i < ebcnt; ++i) {
		if (bbt[i])
			continue;
		err = read_eraseblock_by_2pages(i);
		if (err)
			goto out;
		cond_resched();
	}
	stop_timing();
	speed = calc_speed();
	printk(PRINT_PREF "2 page read speed is %ld KiB/s\n", speed);

	/* Erase all eraseblocks */
	printk(PRINT_PREF "Testing erase speed\n");
	start_timing();
	for (i = 0; i < ebcnt; ++i) {
		if (bbt[i])
			continue;
		err = erase_eraseblock(i);
		if (err)
			goto out;
		cond_resched();
	}
	stop_timing();
	speed = calc_speed();
	printk(PRINT_PREF "erase speed is %ld KiB/s\n", speed);

	printk(PRINT_PREF "finished\n");
out:
	kfree(iobuf);
	kfree(bbt);
	put_mtd_device(mtd);
	if (err)
		printk(PRINT_PREF "error %d occurred\n", err);
	printk(KERN_INFO "=================================================\n");
	return err;
}