static int __init mtd_speedtest_init(void)
{
int err, i, blocks, j, k;
long speed;
uint64_t tmp;
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
if (dev < 0) {
printk(PRINT_PREF "Please specify a valid mtd-device via module paramter\n");
printk(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
return -EINVAL;
}
if (count)
printk(PRINT_PREF "MTD device: %d count: %d\n", dev, count);
else
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
if (IS_ERR(mtd)) {
err = PTR_ERR(mtd);
printk(PRINT_PREF "error: cannot get MTD device\n");
return err;
}
if (mtd->writesize == 1) {
printk(PRINT_PREF "not NAND flash, assume page size is 512 "
"bytes.\n");
pgsize = 512;
} else
pgsize = mtd->writesize;
tmp = mtd->size;
do_div(tmp, mtd->erasesize);
ebcnt = tmp;
pgcnt = mtd->erasesize / pgsize;
printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
"page size %u, count of eraseblocks %u, pages per "
"eraseblock %u, OOB size %u\n",
(unsigned long long)mtd->size, mtd->erasesize,
pgsize, ebcnt, pgcnt, mtd->oobsize);
if (count > 0 && count < ebcnt)
ebcnt = count;
err = -ENOMEM;
iobuf = kmalloc(mtd->erasesize, GFP_KERNEL);
if (!iobuf) {
printk(PRINT_PREF "error: cannot allocate memory\n");
goto out;
}
simple_srand(1);
set_random_data(iobuf, mtd->erasesize);
err = scan_for_bad_eraseblocks();
if (err)
goto out;
err = erase_whole_device();
if (err)
goto out;
/* Write all eraseblocks, 1 eraseblock at a time */
printk(PRINT_PREF "testing eraseblock write speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = write_eraseblock(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "eraseblock write speed is %ld KiB/s\n", speed);
/* Read all eraseblocks, 1 eraseblock at a time */
printk(PRINT_PREF "testing eraseblock read speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = read_eraseblock(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "eraseblock read speed is %ld KiB/s\n", speed);
err = erase_whole_device();
if (err)
goto out;
/* Write all eraseblocks, 1 page at a time */
printk(PRINT_PREF "testing page write speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = write_eraseblock_by_page(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "page write speed is %ld KiB/s\n", speed);
/* Read all eraseblocks, 1 page at a time */
printk(PRINT_PREF "testing page read speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = read_eraseblock_by_page(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "page read speed is %ld KiB/s\n", speed);
err = erase_whole_device();
if (err)
goto out;
/* Write all eraseblocks, 2 pages at a time */
printk(PRINT_PREF "testing 2 page write speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = write_eraseblock_by_2pages(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "2 page write speed is %ld KiB/s\n", speed);
/* Read all eraseblocks, 2 pages at a time */
printk(PRINT_PREF "testing 2 page read speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = read_eraseblock_by_2pages(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "2 page read speed is %ld KiB/s\n", speed);
/* Erase all eraseblocks */
printk(PRINT_PREF "Testing erase speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = erase_eraseblock(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "erase speed is %ld KiB/s\n", speed);
/* Multi-block erase all eraseblocks */
for (k = 1; k < 7; k++) {
blocks = 1 << k;
printk(PRINT_PREF "Testing %dx multi-block erase speed\n",
blocks);
start_timing();
for (i = 0; i < ebcnt; ) {
for (j = 0; j < blocks && (i + j) < ebcnt; j++)
if (bbt[i + j])
break;
if (j < 1) {
i++;
continue;
}
err = multiblock_erase(i, j);
if (err)
goto out;
cond_resched();
i += j;
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "%dx multi-block erase speed is %ld KiB/s\n",
blocks, speed);
}
printk(PRINT_PREF "finished\n");
out:
kfree(iobuf);
kfree(bbt);
put_mtd_device(mtd);
if (err)
printk(PRINT_PREF "error %d occurred\n", err);
printk(KERN_INFO "=================================================\n");
return err;
}
static int __init mtd_speedtest_init(void)
{
int err, i;
long speed;
uint64_t tmp;
printk(KERN_INFO "\n");
printk(KERN_INFO "=================================================\n");
printk(PRINT_PREF "MTD device: %d\n", dev);
mtd = get_mtd_device(NULL, dev);
if (IS_ERR(mtd)) {
err = PTR_ERR(mtd);
printk(PRINT_PREF "error: cannot get MTD device\n");
return err;
}
if (mtd->writesize == 1) {
printk(PRINT_PREF "not NAND flash, assume page size is 512 "
"bytes.\n");
pgsize = 512;
} else
pgsize = mtd->writesize;
tmp = mtd->size;
do_div(tmp, mtd->erasesize);
ebcnt = tmp;
pgcnt = mtd->erasesize / pgsize;
printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, "
"page size %u, count of eraseblocks %u, pages per "
"eraseblock %u, OOB size %u\n",
(unsigned long long)mtd->size, mtd->erasesize,
pgsize, ebcnt, pgcnt, mtd->oobsize);
err = -ENOMEM;
iobuf = kmalloc(mtd->erasesize, GFP_KERNEL);
if (!iobuf) {
printk(PRINT_PREF "error: cannot allocate memory\n");
goto out;
}
simple_srand(1);
set_random_data(iobuf, mtd->erasesize);
err = scan_for_bad_eraseblocks();
if (err)
goto out;
err = erase_whole_device();
if (err)
goto out;
/* Write all eraseblocks, 1 eraseblock at a time */
printk(PRINT_PREF "testing eraseblock write speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = write_eraseblock(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "eraseblock write speed is %ld KiB/s\n", speed);
/* Read all eraseblocks, 1 eraseblock at a time */
printk(PRINT_PREF "testing eraseblock read speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = read_eraseblock(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "eraseblock read speed is %ld KiB/s\n", speed);
err = erase_whole_device();
if (err)
goto out;
/* Write all eraseblocks, 1 page at a time */
printk(PRINT_PREF "testing page write speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = write_eraseblock_by_page(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "page write speed is %ld KiB/s\n", speed);
/* Read all eraseblocks, 1 page at a time */
printk(PRINT_PREF "testing page read speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = read_eraseblock_by_page(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "page read speed is %ld KiB/s\n", speed);
err = erase_whole_device();
if (err)
goto out;
/* Write all eraseblocks, 2 pages at a time */
printk(PRINT_PREF "testing 2 page write speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = write_eraseblock_by_2pages(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "2 page write speed is %ld KiB/s\n", speed);
/* Read all eraseblocks, 2 pages at a time */
printk(PRINT_PREF "testing 2 page read speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = read_eraseblock_by_2pages(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "2 page read speed is %ld KiB/s\n", speed);
/* Erase all eraseblocks */
printk(PRINT_PREF "Testing erase speed\n");
start_timing();
for (i = 0; i < ebcnt; ++i) {
if (bbt[i])
continue;
err = erase_eraseblock(i);
if (err)
goto out;
cond_resched();
}
stop_timing();
speed = calc_speed();
printk(PRINT_PREF "erase speed is %ld KiB/s\n", speed);
printk(PRINT_PREF "finished\n");
out:
kfree(iobuf);
kfree(bbt);
put_mtd_device(mtd);
if (err)
printk(PRINT_PREF "error %d occurred\n", err);
printk(KERN_INFO "=================================================\n");
return err;
}