//Warning: This assumes that both files are CLOSED
bool IndexedEdictFile::buildIndex()
{
KProcess proc;
proc << QStandardPaths::findExecutable("kitengen") << m_dictFile.fileName() << m_indexFile.fileName();
proc.start();
proc.waitForStarted();
do
{
QApplication::processEvents();
} while( proc.waitForFinished( 5000 ) ); //FIXME: This just cuts the index generator off after 5 sec
//FIXME: Check for the result of this operation
return proc.exitStatus() == QProcess::NormalExit && proc.exitCode() == 0;
}
void QGpgMECryptoConfigComponent::runGpgConf()
{
const QString gpgconf = QGpgMECryptoConfig::gpgConfPath();
if ( gpgconf.isEmpty() ) {
kWarning(5150) << "Can't get path to gpgconf executable...";
return;
}
// Run gpgconf --list-options <component>, and create all groups and entries for that component
KProcess proc;
proc << gpgconf;
proc << "--list-options";
proc << mName;
//kDebug(5150) <<"Running gpgconf --list-options" << mName;
connect( &proc, SIGNAL(readyReadStandardOutput()),
this, SLOT(slotCollectStdOut()) );
mCurrentGroup = 0;
// run the process:
int rc = 0;
proc.setOutputChannelMode( KProcess::OnlyStdoutChannel );
proc.start();
if ( !proc.waitForFinished() )
rc = -2;
else if ( proc.exitStatus() == QProcess::NormalExit )
rc = proc.exitCode();
else
rc = -1;
if( rc != 0 ) // can happen when using the wrong version of gpg...
kWarning(5150) <<"Running 'gpgconf --list-options" << mName <<"' failed." << strerror( rc ) <<", but try that command to see the real output";
else {
if ( mCurrentGroup && !mCurrentGroup->mEntriesNaturalOrder.empty() ) { // only add non-empty groups
mGroupsByName.insert( mCurrentGroupName, mCurrentGroup );
mGroupsNaturalOrder.push_back( std::make_pair( mCurrentGroupName, mCurrentGroup ) );
}
}
}
void QGpgMECryptoConfig::runGpgConf( bool showErrors )
{
// Run gpgconf --list-components to make the list of components
KProcess process;
process << gpgConfPath();
process << "--list-components";
connect( &process, SIGNAL(readyReadStandardOutput()),
this, SLOT(slotCollectStdOut()) );
// run the process:
int rc = 0;
process.setOutputChannelMode( KProcess::OnlyStdoutChannel );
process.start();
if ( !process.waitForFinished() )
rc = -2;
else if ( process.exitStatus() == QProcess::NormalExit )
rc = process.exitCode();
else
rc = -1;
// handle errors, if any (and if requested)
if ( showErrors && rc != 0 ) {
QString reason;
if ( rc == -1 )
reason = i18n( "program terminated unexpectedly" );
else if ( rc == -2 )
reason = i18n( "program not found or cannot be started" );
else
reason = QString::fromLocal8Bit( strerror(rc) ); // XXX errno as an exit code?
QString wmsg = i18n("<qt>Failed to execute gpgconf:<p>%1</p></qt>", reason);
kWarning(5150) << wmsg; // to see it from test_cryptoconfig.cpp
KMessageBox::error(0, wmsg);
}
mParsed = true;
}
bool ImageGrayScale::image2GrayScaleImageMagick(const QString& src, const QString& dest, QString& err)
{
KProcess process;
process.clearProgram();
process << "convert";
process << "-type" << "Grayscale";
process << src + QString("[0]") << dest;
kDebug( 51000 ) << "ImageMagick Command line: " << process.program() << endl;
process.start();
if (!process.waitForFinished())
return false;
if (process.exitStatus() != QProcess::NormalExit)
return false;
switch (process.exitCode())
{
case 0: // Process finished successfully !
{
return true;
break;
}
case 15: // process aborted !
{
return false;
break;
}
}
// Processing error !
m_stdErr = process.readAllStandardError();
err = i18n("Cannot convert to gray scale: %1", m_stdErr.replace('\n', ' '));
return false;
}
bool ImageRotate::rotateImageMagick(const QString& src, const QString& dest,
RotateAction angle, QString& err)
{
KProcess process;
process.clearProgram();
process << "convert";
process << "-rotate";
switch(angle)
{
case (Rot90):
{
process << "90";
break;
}
case (Rot180):
{
process << "180";
break;
}
case (Rot270):
{
process << "270";
break;
}
case (Rot0):
{
break;
}
default:
{
kError() << "ImageRotate: Nonstandard rotation angle";
err = i18n("Nonstandard rotation angle");
return false;
}
}
process << src + QString("[0]") << dest;
kDebug() << "ImageMagick Command line: " << process.program();
process.start();
if (!process.waitForFinished())
return false;
if (process.exitStatus() != QProcess::NormalExit)
return false;
switch (process.exitCode())
{
case 0: // Process finished successfully !
{
return true;
break;
}
case 15: // process aborted !
{
return false;
break;
}
}
// Processing error !
m_stdErr = process.readAllStandardError();
err = i18n("Cannot rotate: %1", m_stdErr.replace('\n', ' '));
return false;
}
bool Utils::updateMetadataImageMagick(const QString& src, QString& err)
{
QFileInfo finfo(src);
if (src.isEmpty() || !finfo.isReadable())
{
err = i18n("unable to open source file");
return false;
}
QImage img(src);
QImage iptcPreview = img.scaled(1280, 1024, Qt::KeepAspectRatio, Qt::SmoothTransformation);
QImage exifThumbnail = iptcPreview.scaled(160, 120, Qt::KeepAspectRatio, Qt::SmoothTransformation);
KExiv2Iface::KExiv2 meta;
meta.load(src);
meta.setImageOrientation(KExiv2Iface::KExiv2::ORIENTATION_NORMAL);
meta.setImageProgramId(QString("Kipi-plugins"), QString(kipiplugins_version));
meta.setImageDimensions(img.size());
meta.setExifThumbnail(exifThumbnail);
meta.setImagePreview(iptcPreview);
#if KEXIV2_VERSION >= 0x010000
QByteArray exifData = meta.getExifEncoded(true);
#else
QByteArray exifData = meta.getExif(true);
#endif
QByteArray iptcData = meta.getIptc(true);
QByteArray xmpData = meta.getXmp();
KTemporaryFile exifTemp;
exifTemp.setSuffix(QString("kipipluginsexif.app1"));
exifTemp.setAutoRemove(true);
if ( !exifTemp.open() )
{
err = i18n("unable to open temp file");
return false;
}
QString exifFile = exifTemp.fileName();
QDataStream streamExif( &exifTemp );
streamExif.writeRawData(exifData.data(), exifData.size());
exifTemp.close();
KTemporaryFile iptcTemp;
iptcTemp.setSuffix(QString("kipipluginsiptc.8bim"));
iptcTemp.setAutoRemove(true);
iptcTemp.open();
if ( !iptcTemp.open() )
{
err = i18n("Cannot rotate: unable to open temp file");
return false;
}
QString iptcFile = iptcTemp.fileName();
QDataStream streamIptc( &iptcTemp );
streamIptc.writeRawData(iptcData.data(), iptcData.size());
iptcTemp.close();
KTemporaryFile xmpTemp;
xmpTemp.setSuffix(QString("kipipluginsxmp.xmp"));
xmpTemp.setAutoRemove(true);
if ( !xmpTemp.open() )
{
err = i18n("unable to open temp file");
return false;
}
QString xmpFile = xmpTemp.fileName();
QDataStream streamXmp( &xmpTemp );
streamXmp.writeRawData(xmpData.data(), xmpData.size());
xmpTemp.close();
KProcess process;
process.clearProgram();
process << "mogrify";
process << "-profile";
process << exifFile;
process << "-profile";
process << iptcFile;
process << "-profile";
process << xmpFile;
process << src + QString("[0]");
kDebug() << "ImageMagick Command line: " << process.program();
process.start();
if (!process.waitForFinished())
return false;
if (process.exitStatus() != QProcess::NormalExit)
return false;
switch (process.exitCode())
{
case 0: // Process finished successfully !
{
return true;
break;
}
case 15: // process aborted !
{
return false;
break;
}
}
// Processing error !
m_stdErr = process.readAllStandardError();
err = i18n("Cannot update metadata: %1", m_stdErr.replace('\n', ' '));
return false;
}
Defines MsvcCompiler::defines(const QString&) const
{
Defines ret;
//Get standard macros from kdevmsvcdefinehelpers
KProcess proc;
proc.setOutputChannelMode( KProcess::MergedChannels );
proc.setTextModeEnabled( true );
// we want to use kdevmsvcdefinehelper as a pseudo compiler backend which
// returns the defines used in msvc. there is no such thing as -dM with cl.exe
proc << path() << "/nologo" << "/Bxkdevmsvcdefinehelper" << "empty.cpp";
// this will fail, so check on that as well
if ( proc.execute( 5000 ) == 2 ) {
QString line;
proc.readLine(); // read the filename
while ( proc.canReadLine() ) {
QByteArray buff = proc.readLine();
definesAndIncludesDebug() << "msvcstandardmacros:" << buff;
if ( !buff.isEmpty() ) {
line = buff;
if ( line.startsWith( "#define " ) ) {
line = line.right( line.length() - 8 ).trimmed();
int pos = line.indexOf( ' ' );
if ( pos != -1 ) {
ret[line.left( pos )] = line.right( line.length() - pos - 1 ).toUtf8();
} else {
ret[line] = "";
}
}
}
}
} else {
definesAndIncludesDebug() << "Unable to read standard c++ macro definitions from " + path();
while ( proc.canReadLine() ){
definesAndIncludesDebug() << proc.readLine();
}
definesAndIncludesDebug() << proc.exitCode();
}
// MSVC builtin attributes
{
ret["__cdecl"] = "";
ret["__fastcall"] = "";
ret["__stdcall"] = "";
ret["__thiscall"] = "";
}
// MSVC builtin types
// see http://msdn.microsoft.com/en-us/library/cc953fe1.aspx
{
ret["__int8"] = "char";
ret["__int16"] = "short";
ret["__int32"] = "int";
ret["__int64"] = "long long";
ret["__int16"] = "short";
ret["__ptr32"] = "";
ret["__ptr64"] = "";
}
// MSVC specific modifiers
// see http://msdn.microsoft.com/en-us/library/vstudio/s04b5w00.aspx
{
ret["__sptr"] = "";
ret["__uptr"] = "";
ret["__unaligned"] = "";
ret["__w64"] = "";
}
// MSVC function specifiers
// see http://msdn.microsoft.com/de-de/library/z8y1yy88.aspx
{
ret["__inline"] = "";
ret["__forceinline"] = "";
}
return ret;
}
