예제 #1
0
Error
ProcessWindows::DoLaunch(Module *exe_module,
                         ProcessLaunchInfo &launch_info)
{
    // Even though m_session_data is accessed here, it is before a debugger thread has been
    // kicked off.  So there's no race conditions, and it shouldn't be necessary to acquire
    // the mutex.

    Error result;
    if (!launch_info.GetFlags().Test(eLaunchFlagDebug))
    {
        StreamString stream;
        stream.Printf("ProcessWindows unable to launch '%s'.  ProcessWindows can only be used for debug launches.",
                      launch_info.GetExecutableFile().GetPath().c_str());
        std::string message = stream.GetString();
        result.SetErrorString(message.c_str());

        WINERR_IFALL(WINDOWS_LOG_PROCESS, message.c_str());
        return result;
    }

    bool stop_at_entry = launch_info.GetFlags().Test(eLaunchFlagStopAtEntry);
    m_session_data.reset(new ProcessWindowsData(stop_at_entry));

    SetPrivateState(eStateLaunching);
    DebugDelegateSP delegate(new LocalDebugDelegate(shared_from_this()));
    m_session_data->m_debugger.reset(new DebuggerThread(delegate));
    DebuggerThreadSP debugger = m_session_data->m_debugger;

    // Kick off the DebugLaunch asynchronously and wait for it to complete.
    result = debugger->DebugLaunch(launch_info);
    if (result.Fail())
    {
        WINERR_IFALL(WINDOWS_LOG_PROCESS, "DoLaunch failed launching '%s'.  %s",
                     launch_info.GetExecutableFile().GetPath().c_str(), result.AsCString());
        return result;
    }

    HostProcess process;
    Error error = WaitForDebuggerConnection(debugger, process);
    if (error.Fail())
    {
        WINERR_IFALL(WINDOWS_LOG_PROCESS, "DoLaunch failed launching '%s'.  %s",
                     launch_info.GetExecutableFile().GetPath().c_str(), error.AsCString());
        return error;
    }

    WINLOG_IFALL(WINDOWS_LOG_PROCESS, "DoLaunch successfully launched '%s'",
                 launch_info.GetExecutableFile().GetPath().c_str());

    // We've hit the initial stop.  If eLaunchFlagsStopAtEntry was specified, the private state
    // should already be set to eStateStopped as a result of hitting the initial breakpoint.  If
    // it was not set, the breakpoint should have already been resumed from and the private state
    // should already be eStateRunning.
    launch_info.SetProcessID(process.GetProcessId());
    SetID(process.GetProcessId());

    return result;
}
예제 #2
0
lldb::thread_result_t
DebuggerThread::DebuggerThreadLaunchRoutine(const ProcessLaunchInfo &launch_info)
{
    // Grab a shared_ptr reference to this so that we know it won't get deleted until after the
    // thread routine has exited.
    std::shared_ptr<DebuggerThread> this_ref(shared_from_this());

    WINLOG_IFALL(WINDOWS_LOG_PROCESS, "DebuggerThread preparing to launch '%s' on background thread.",
                 launch_info.GetExecutableFile().GetPath().c_str());

    Error error;
    ProcessLauncherWindows launcher;
    HostProcess process(launcher.LaunchProcess(launch_info, error));
    // If we couldn't create the process, notify waiters immediately.  Otherwise enter the debug
    // loop and wait until we get the create process debug notification.  Note that if the process
    // was created successfully, we can throw away the process handle we got from CreateProcess
    // because Windows will give us another (potentially more useful?) handle when it sends us the
    // CREATE_PROCESS_DEBUG_EVENT.
    if (error.Success())
        DebugLoop();
    else
        m_debug_delegate->OnDebuggerError(error, 0);

    return 0;
}
예제 #3
0
HostProcess
ProcessLauncherAndroid::LaunchProcess(const ProcessLaunchInfo &launch_info, Error &error)
{
    // TODO: Handle other launch parameters specified in launc_info

    char exe_path[PATH_MAX];
    launch_info.GetExecutableFile().GetPath(exe_path, sizeof(exe_path));

    lldb::pid_t pid = ::fork();
    if (pid == static_cast<lldb::pid_t>(-1))
    {
        // Fork failed
        error.SetErrorStringWithFormat("Fork failed with error message: %s", strerror(errno));
        return HostProcess(LLDB_INVALID_PROCESS_ID);
    }
    else if (pid == 0)
    {
        if (const lldb_private::FileAction *file_action = launch_info.GetFileActionForFD(STDIN_FILENO)) {
            const char* path = file_action->GetPath();
            if (path && ::strlen(path))
                if (!DupDescriptor(path, STDIN_FILENO, O_RDONLY))
                    exit(-1);
        }

        if (const lldb_private::FileAction *file_action = launch_info.GetFileActionForFD(STDOUT_FILENO)) {
            const char* path = file_action->GetPath();
            if (path && ::strlen(path))
                if (!DupDescriptor(path, STDOUT_FILENO, O_WRONLY | O_CREAT | O_TRUNC))
                    exit(-1);
        }

        if (const lldb_private::FileAction *file_action = launch_info.GetFileActionForFD(STDERR_FILENO)) {
            const char* path = file_action->GetPath();
            if (path && ::strlen(path))
                if (!DupDescriptor(path, STDERR_FILENO, O_WRONLY | O_CREAT | O_TRUNC))
                    exit(-1);
        }

        // Child process
        const char **argv = launch_info.GetArguments().GetConstArgumentVector();

        Args env = launch_info.GetEnvironmentEntries();
        FixupEnvironment(env);
        const char **envp = env.GetConstArgumentVector();

        const char *working_dir = launch_info.GetWorkingDirectory();
        if (working_dir != nullptr && working_dir[0])
        {
            if (::chdir(working_dir) != 0)
                exit(-1);
        }

        execve(argv[0],
               const_cast<char *const *>(argv),
               const_cast<char *const *>(envp));
        exit(-1);
    }
   
    return HostProcess(pid);
}
예제 #4
0
HostProcess
ProcessLauncherPosix::LaunchProcess(const ProcessLaunchInfo &launch_info,
                                    Error &error) {
  lldb::pid_t pid;
  char exe_path[PATH_MAX];

  launch_info.GetExecutableFile().GetPath(exe_path, sizeof(exe_path));

  // TODO(zturner): Move the code from LaunchProcessPosixSpawn to here, and make
  // MacOSX re-use this
  // ProcessLauncher when it wants a posix_spawn launch.
  error = Host::LaunchProcessPosixSpawn(exe_path, launch_info, pid);
  return HostProcess(pid);
}
예제 #5
0
Error
PlatformLinux::LaunchNativeProcess (
    ProcessLaunchInfo &launch_info,
    lldb_private::NativeProcessProtocol::NativeDelegate &native_delegate,
    NativeProcessProtocolSP &process_sp)
{
#if !defined(__linux__)
    return Error("only implemented on Linux hosts");
#else
    if (!IsHost ())
        return Error("PlatformLinux::%s (): cannot launch a debug process when not the host", __FUNCTION__);

    // Retrieve the exe module.
    lldb::ModuleSP exe_module_sp;

    Error error = ResolveExecutable (
        launch_info.GetExecutableFile (),
        launch_info.GetArchitecture (),
        exe_module_sp,
        NULL);

    if (!error.Success ())
        return error;

    if (!exe_module_sp)
        return Error("exe_module_sp could not be resolved for %s", launch_info.GetExecutableFile ().GetPath ().c_str ());

    // Launch it for debugging
    error = NativeProcessLinux::LaunchProcess (
        exe_module_sp.get (),
        launch_info,
        native_delegate,
        process_sp);

    return error;
#endif
}
예제 #6
0
Error
DebuggerThread::DebugLaunch(const ProcessLaunchInfo &launch_info)
{
    WINLOG_IFALL(WINDOWS_LOG_PROCESS,
        "DebuggerThread::DebugLaunch launching '%s'", launch_info.GetExecutableFile().GetPath().c_str());

    Error error;
    DebugLaunchContext *context = new DebugLaunchContext(this, launch_info);
    HostThread slave_thread(ThreadLauncher::LaunchThread("lldb.plugin.process-windows.slave[?]",
                                                         DebuggerThreadLaunchRoutine, context, &error));

    if (!error.Success())
    {
        WINERR_IFALL(WINDOWS_LOG_PROCESS,
            "DebugLaunch couldn't launch debugger thread.  %s", error.AsCString());
    }

    return error;
}
HostProcess
ProcessLauncherPosixFork::LaunchProcess(const ProcessLaunchInfo &launch_info,
                                        Status &error) {
  char exe_path[PATH_MAX];
  launch_info.GetExecutableFile().GetPath(exe_path, sizeof(exe_path));

  // A pipe used by the child process to report errors.
  PipePosix pipe;
  const bool child_processes_inherit = false;
  error = pipe.CreateNew(child_processes_inherit);
  if (error.Fail())
    return HostProcess();

  ::pid_t pid = ::fork();
  if (pid == -1) {
    // Fork failed
    error.SetErrorStringWithFormatv("Fork failed with error message: {0}",
                                    llvm::sys::StrError());
    return HostProcess(LLDB_INVALID_PROCESS_ID);
  }
  if (pid == 0) {
    // child process
    pipe.CloseReadFileDescriptor();
    ChildFunc(pipe.ReleaseWriteFileDescriptor(), launch_info);
  }

  // parent process

  pipe.CloseWriteFileDescriptor();
  char buf[1000];
  int r = read(pipe.GetReadFileDescriptor(), buf, sizeof buf);

  if (r == 0)
    return HostProcess(pid); // No error. We're done.

  error.SetErrorString(buf);

  llvm::sys::RetryAfterSignal(-1, waitpid, pid, nullptr, 0);

  return HostProcess();
}
예제 #8
0
Error
GDBRemoteCommunication::StartDebugserverProcess (const char *hostname,
                                                 uint16_t in_port,
                                                 ProcessLaunchInfo &launch_info,
                                                 uint16_t &out_port)
{
    Log *log (ProcessGDBRemoteLog::GetLogIfAllCategoriesSet (GDBR_LOG_PROCESS));
    if (log)
        log->Printf ("GDBRemoteCommunication::%s(hostname=%s, in_port=%" PRIu16 ", out_port=%" PRIu16, __FUNCTION__, hostname ? hostname : "<empty>", in_port, out_port);

    out_port = in_port;
    Error error;
    // If we locate debugserver, keep that located version around
    static FileSpec g_debugserver_file_spec;
    
    char debugserver_path[PATH_MAX];
    FileSpec &debugserver_file_spec = launch_info.GetExecutableFile();
    
    // Always check to see if we have an environment override for the path
    // to the debugserver to use and use it if we do.
    const char *env_debugserver_path = getenv("LLDB_DEBUGSERVER_PATH");
    if (env_debugserver_path)
    {
        debugserver_file_spec.SetFile (env_debugserver_path, false);
        if (log)
            log->Printf ("GDBRemoteCommunication::%s() gdb-remote stub exe path set from environment variable: %s", __FUNCTION__, env_debugserver_path);
    }
    else
        debugserver_file_spec = g_debugserver_file_spec;
    bool debugserver_exists = debugserver_file_spec.Exists();
    if (!debugserver_exists)
    {
        // The debugserver binary is in the LLDB.framework/Resources
        // directory.
        if (HostInfo::GetLLDBPath(ePathTypeSupportExecutableDir, debugserver_file_spec))
        {
            debugserver_file_spec.AppendPathComponent (DEBUGSERVER_BASENAME);
            debugserver_exists = debugserver_file_spec.Exists();
            if (debugserver_exists)
            {
                if (log)
                    log->Printf ("GDBRemoteCommunication::%s() found gdb-remote stub exe '%s'", __FUNCTION__, debugserver_file_spec.GetPath ().c_str ());

                g_debugserver_file_spec = debugserver_file_spec;
            }
            else
            {
                if (log)
                    log->Printf ("GDBRemoteCommunication::%s() could not find gdb-remote stub exe '%s'", __FUNCTION__, debugserver_file_spec.GetPath ().c_str ());

                g_debugserver_file_spec.Clear();
                debugserver_file_spec.Clear();
            }
        }
    }
    
    if (debugserver_exists)
    {
        debugserver_file_spec.GetPath (debugserver_path, sizeof(debugserver_path));

        Args &debugserver_args = launch_info.GetArguments();
        debugserver_args.Clear();
        char arg_cstr[PATH_MAX];

        // Start args with "debugserver /file/path -r --"
        debugserver_args.AppendArgument(debugserver_path);

#if !defined(__APPLE__)
        // First argument to lldb-server must be mode in which to run.
        debugserver_args.AppendArgument("gdbserver");
#endif

        // If a host and port is supplied then use it
        char host_and_port[128];
        if (hostname)
        {
            snprintf (host_and_port, sizeof(host_and_port), "%s:%u", hostname, in_port);
            debugserver_args.AppendArgument(host_and_port);
        }
        else
        {
            host_and_port[0] = '\0';
        }

        // use native registers, not the GDB registers
        debugserver_args.AppendArgument("--native-regs");

        if (launch_info.GetLaunchInSeparateProcessGroup())
        {
            debugserver_args.AppendArgument("--setsid");
        }

        llvm::SmallString<PATH_MAX> named_pipe_path;
        Pipe port_pipe;

        bool listen = false;
        if (host_and_port[0])
        {
            // Create a temporary file to get the stdout/stderr and redirect the
            // output of the command into this file. We will later read this file
            // if all goes well and fill the data into "command_output_ptr"

            if (in_port == 0)
            {
                // Binding to port zero, we need to figure out what port it ends up
                // using using a named pipe...
                error = port_pipe.CreateWithUniqueName("debugserver-named-pipe", false, named_pipe_path);
                if (error.Success())
                {
                    debugserver_args.AppendArgument("--named-pipe");
                    debugserver_args.AppendArgument(named_pipe_path.c_str());
                }
                else
                {
                    if (log)
                        log->Printf("GDBRemoteCommunication::%s() "
                                "named pipe creation failed: %s",
                                __FUNCTION__, error.AsCString());
                    // let's try an unnamed pipe
                    error = port_pipe.CreateNew(true);
                    if (error.Fail())
                    {
                        if (log)
                            log->Printf("GDBRemoteCommunication::%s() "
                                    "unnamed pipe creation failed: %s",
                                    __FUNCTION__, error.AsCString());
                        return error;
                    }
                    int write_fd = port_pipe.GetWriteFileDescriptor();
                    debugserver_args.AppendArgument("--pipe");
                    debugserver_args.AppendArgument(std::to_string(write_fd).c_str());
                    launch_info.AppendCloseFileAction(port_pipe.GetReadFileDescriptor());
                }
            }
            else
            {
                listen = true;
            }
        }
        else
        {
            // No host and port given, so lets listen on our end and make the debugserver
            // connect to us..
            error = StartListenThread ("127.0.0.1", 0);
            if (error.Fail())
                return error;

            ConnectionFileDescriptor *connection = (ConnectionFileDescriptor *)GetConnection ();
            // Wait for 10 seconds to resolve the bound port
            out_port = connection->GetListeningPort(10);
            if (out_port > 0)
            {
                char port_cstr[32];
                snprintf(port_cstr, sizeof(port_cstr), "127.0.0.1:%i", out_port);
                // Send the host and port down that debugserver and specify an option
                // so that it connects back to the port we are listening to in this process
                debugserver_args.AppendArgument("--reverse-connect");
                debugserver_args.AppendArgument(port_cstr);
            }
            else
            {
                error.SetErrorString ("failed to bind to port 0 on 127.0.0.1");
                return error;
            }
        }
        
        const char *env_debugserver_log_file = getenv("LLDB_DEBUGSERVER_LOG_FILE");
        if (env_debugserver_log_file)
        {
            ::snprintf (arg_cstr, sizeof(arg_cstr), "--log-file=%s", env_debugserver_log_file);
            debugserver_args.AppendArgument(arg_cstr);
        }
        
        const char *env_debugserver_log_flags = getenv("LLDB_DEBUGSERVER_LOG_FLAGS");
        if (env_debugserver_log_flags)
        {
            ::snprintf (arg_cstr, sizeof(arg_cstr), "--log-flags=%s", env_debugserver_log_flags);
            debugserver_args.AppendArgument(arg_cstr);
        }

        // Add additional args, starting with LLDB_DEBUGSERVER_EXTRA_ARG_1 until an env var doesn't come back.
        uint32_t env_var_index = 1;
        bool has_env_var;
        do
        {
            char env_var_name[64];
            snprintf (env_var_name, sizeof (env_var_name), "LLDB_DEBUGSERVER_EXTRA_ARG_%" PRIu32, env_var_index++);
            const char *extra_arg = getenv(env_var_name);
            has_env_var = extra_arg != nullptr;

            if (has_env_var)
            {
                debugserver_args.AppendArgument (extra_arg);
                if (log)
                    log->Printf ("GDBRemoteCommunication::%s adding env var %s contents to stub command line (%s)", __FUNCTION__, env_var_name, extra_arg);
            }
        } while (has_env_var);

        // Close STDIN, STDOUT and STDERR.
        launch_info.AppendCloseFileAction (STDIN_FILENO);
        launch_info.AppendCloseFileAction (STDOUT_FILENO);
        launch_info.AppendCloseFileAction (STDERR_FILENO);

        // Redirect STDIN, STDOUT and STDERR to "/dev/null".
        launch_info.AppendSuppressFileAction (STDIN_FILENO, true, false);
        launch_info.AppendSuppressFileAction (STDOUT_FILENO, false, true);
        launch_info.AppendSuppressFileAction (STDERR_FILENO, false, true);
        
        error = Host::LaunchProcess(launch_info);
        
        if (error.Success() && launch_info.GetProcessID() != LLDB_INVALID_PROCESS_ID)
        {
            if (named_pipe_path.size() > 0)
            {
                error = port_pipe.OpenAsReader(named_pipe_path, false);
                if (error.Fail())
                    if (log)
                        log->Printf("GDBRemoteCommunication::%s() "
                                "failed to open named pipe %s for reading: %s",
                                __FUNCTION__, named_pipe_path.c_str(), error.AsCString());
            }

            if (port_pipe.CanWrite())
                port_pipe.CloseWriteFileDescriptor();
            if (port_pipe.CanRead())
            {
                char port_cstr[256];
                port_cstr[0] = '\0';
                size_t num_bytes = sizeof(port_cstr);
                // Read port from pipe with 10 second timeout.
                error = port_pipe.ReadWithTimeout(port_cstr, num_bytes,
                        std::chrono::seconds{10}, num_bytes);
                if (error.Success())
                {
                    assert(num_bytes > 0 && port_cstr[num_bytes-1] == '\0');
                    out_port = StringConvert::ToUInt32(port_cstr, 0);
                    if (log)
                        log->Printf("GDBRemoteCommunication::%s() "
                                "debugserver listens %u port",
                                __FUNCTION__, out_port);
                }
                else
                {
                    if (log)
                        log->Printf("GDBRemoteCommunication::%s() "
                                "failed to read a port value from pipe %s: %s",
                                __FUNCTION__, named_pipe_path.c_str(), error.AsCString());

                }
                port_pipe.Close();
            }

            if (named_pipe_path.size() > 0)
            {
                const auto err = port_pipe.Delete(named_pipe_path);
                if (err.Fail())
                {
                    if (log)
                        log->Printf ("GDBRemoteCommunication::%s failed to delete pipe %s: %s",
                                __FUNCTION__, named_pipe_path.c_str(), err.AsCString());
                }
            }

            // Make sure we actually connect with the debugserver...
            JoinListenThread();
        }
    }
    else
    {
        error.SetErrorStringWithFormat ("unable to locate " DEBUGSERVER_BASENAME );
    }
    return error;
}
예제 #9
0
파일: Host.cpp 프로젝트: chee-z/lldb
Error
Host::LaunchProcess (ProcessLaunchInfo &launch_info)
{
    Error error;
    char exe_path[PATH_MAX];

    PlatformSP host_platform_sp (Platform::GetHostPlatform ());

    const ArchSpec &arch_spec = launch_info.GetArchitecture();

    FileSpec exe_spec(launch_info.GetExecutableFile());

    FileSpec::FileType file_type = exe_spec.GetFileType();
    if (file_type != FileSpec::eFileTypeRegular)
    {
        lldb::ModuleSP exe_module_sp;
        error = host_platform_sp->ResolveExecutable (exe_spec,
                                                     arch_spec,
                                                     exe_module_sp,
                                                     NULL);

        if (error.Fail())
            return error;

        if (exe_module_sp)
            exe_spec = exe_module_sp->GetFileSpec();
    }

    if (exe_spec.Exists())
    {
        exe_spec.GetPath (exe_path, sizeof(exe_path));
    }
    else
    {
        launch_info.GetExecutableFile().GetPath (exe_path, sizeof(exe_path));
        error.SetErrorStringWithFormat ("executable doesn't exist: '%s'", exe_path);
        return error;
    }

    assert(!launch_info.GetFlags().Test (eLaunchFlagLaunchInTTY));

    ::pid_t pid = LLDB_INVALID_PROCESS_ID;

    error = LaunchProcessPosixSpawn(exe_path, launch_info, pid);

    if (pid != LLDB_INVALID_PROCESS_ID)
    {
        // If all went well, then set the process ID into the launch info
        launch_info.SetProcessID(pid);

        Log *log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_PROCESS));

        // Make sure we reap any processes we spawn or we will have zombies.
        if (!launch_info.MonitorProcess())
        {
            const bool monitor_signals = false;
            StartMonitoringChildProcess (Process::SetProcessExitStatus,
                                         NULL,
                                         pid,
                                         monitor_signals);
            if (log)
                log->PutCString ("monitored child process with default Process::SetProcessExitStatus.");
        }
        else
        {
            if (log)
                log->PutCString ("monitored child process with user-specified process monitor.");
        }
    }
    else
    {
        // Invalid process ID, something didn't go well
        if (error.Success())
            error.SetErrorString ("process launch failed for unknown reasons");
    }
    return error;
}